Search

Traffic congestion is becoming a serious problem with the large number of vehicle on the roads. In the traditional traffic control system, the timing of the green light is adjusted regardless of the average traffic rate at the junction. Many strategies have been introduced to solve and improve vehicle management. However, in order to handle road traffic issues, an intelligent traffic management solution is required. This article represents a self adaptive real-time traffic light control algorithm based on the traffic flow. We present a machine learning approach coupled with image processing to manage the traffic clearance at the signal junction. The proposed system utilizes single image processing via neural network and You Only Look Once (YOLOv3) framework to establish traffic clearance at the signal. We employed YOLO architectures because it is accurate in terms of mean average precision (mAP), interaction over union (IOU) values and fast in object detection tasks as well. It runs significantly faster than other detection methods with comparable performance. The average processing time of single image was estimated to be 1.3 s. Further based on the input from YOLO we estimated the 'on' time period green light for effective traffic clearance. Several real time parameters like number of vehicles (two wheelers, four wheelers), road width and junction crossing time are considered to estimate the 'on'time of green light. Moreover, we used the real traffic images to test the performance and trained the system with different dataset. Our experiments investigation reveals that the predicted vehicle counts were well matched with the actual vehicle count and proposed method apprehended an average accuracy of 81.1%. The reported strategy is self adaptive, highly accurate, fast and has the potential to be implemented in the traffic clearance at the junctions. [ABSTRACT FROM AUTHOR]

Because of the population increasing so high, and traffic density remaining the same, traffic prediction has become a great challenge today. Creating a higher degree of communication in automobiles results in the time wastage, fuel wastage, environmental damage, and even death caused by citizens being trapped in the middle of traffic. Only a few researchers work in traffic congestion prediction and control systems, but it may provide less accuracy. So, this paper proposed an efficient IoT-based traffic prediction using OWENN algorithm and traffic signal control system using Intel 80,286 microprocessor for a smart city. The proposed system consists of '5' phases, namely IoT data collection, feature extraction, classification, optimized traffic IoT values, and traffic signal control system. Initially, the IoT traffic data are collected from the dataset. After that, traffic, weather, and direction information are extracted, and these extracted features are given as input to the OWENN classifier, which classifies which place has more traffic. Suppose one direction of the place has more traffic, it optimizes the IoT values by using IBSO, and finally, the traffic is controlled by using Intel 80,286 microprocessor. An efficient OWENN algorithm for traffic prediction and traffic signal control using a Intel 80,286 microprocessor for a smart city. After extracting the features, the classification is performed in this step. Hereabout, the classification is done by using the optimized weight Elman neural network (OWENN) algorithm that classifies which places have more traffic. OWENN attains 98.23% accuracy than existing model also its achieved 96.69% F-score than existing model. The experimental results show that the proposed system outperforms state-of-the-art methods. [ABSTRACT FROM AUTHOR]

Traffic is a major challenge for electronic cities and coping with it requires analyzing traffic congestion in the city road network. In this paper, the performance index of vehicle speed was estimated to evaluate the conditions of road networks. This study analyzes the traffic density for the main network of Hamedan communication routes based on the collected data of Speed performance of Hamedan traffic control system. According to this analysis, the congestion index and traffic peak hours were determined. Also the relationship between vehicle speed and traffic congestion was predictably predictable by neural network and the genetic algorithm. In this study areas of traffic were identified using Hamedan traffic control center due to the speed of vehicles. [ABSTRACT FROM AUTHOR]

The urban green wave traffic control system is one of the effective means to solve the problems of urban traffic jams and reduce vehicle delay. Aiming at the problems of traditional green wave traffic control in optimization computation, this paper introduces the adaptive mechanism and crossover, mutation operators to artificial fish swarm algorithm (AFSA) in order to adjust the evolution group. Through setting bulletin board measure and retention strategy, the individual status of the optimal artificial fish is recorded. In that way, the adaptive genetic AFSA is established. Finally, the paper applies this algorithm to green wave traffic control in five continuous intersections on Jianning Road, Lanzhou, China, gains one traffic control program better than traditional method through calculation, and verifies the feasibility and effectiveness of adaptive genetic-AFSA to optimize green wave traffic control system. [ABSTRACT FROM AUTHOR]

Urban traffic congestion is a common problem that affects many cities around the world. In this paper, an actual urban traffic simulation model (AUTM) for traffic congestion predicting and avoiding is proposed, which includes three key components: the map and transfer (MT) conversion method, the optimized spatial evolution rules, and a congestion-avoidance routing algorithm. Three key techniques are combined in our proposed model: (1) The MT conversion method is proposed to get actual urban cellular spaces, which apply the optimized spatial evolution rules to simulate the vehicular dynamics better. (2) AUTM is proposed for simulating traffic congestion and predicting the effect of adding overpasses and roadblocks. (3) The congestion-avoidance routing algorithm is proposed for vehicles to dynamically update their routes toward their destinations, which can achieve traffic optimization in urban simulations. This paper presents the results of applying this novel model to a large-scale real-world case in different urban traffic congestion situations. Extensive experimental simulations in various actual cities have been carried out. Our results in the extreme case are encouraging: The prediction accuracy of traffic congestions is almost 89%, and the variance of prediction road density is less than 0.15. [ABSTRACT FROM AUTHOR]

Traffic congestion is a growing problem in many countries around the world. It has been recognized that instead of constructing more roads and freeways to counter this problem it is prudent to improve the utilization of existing road network through a judicious combination of advances in control engineering, communication and information technology. The traffic control architecture proposed in this paper is a combination of communicating Urban Traffic Control Architecture (UTCA) and Freeway Traffic Control Architecture (FTCA). The UTCA combines context-awareness, Cyber-Physical Systems (CPS) principles, and Autonomic Computing System (ACS) principles to optimize traffic congestion and enforce safety in urban traffic network. The UTCA includes a network of adaptive intersection traffic controllers and their immediate supervisory systems, who are also networked. The central piece of each traffic controller is an arbiter, which is a mini CPS. It is aware of the traffic dynamics at the intersection managed by it, by virtue of continuous input from monitoring sensors. Due to this context-awareness ability and its communication ability to exchange traffic information with its neighbors, it can execute policy-based reactions in order to enable safe and efficient traffic throughput at its intersection. Each urban traffic supervisory system is designed with ACS principles in order to minimize downtime caused by environmental emergencies and maximize security of the subsystem under it. A supervisory subsystem will also collect global traffic flow information and contextual constraints from its neighbors. Based on this input it will modify policies and communicate them to its traffic controller for timely adaptation. The urban traffic flowing into freeway traffic will be mediated by Intelligent Ramp Meters (IRM). An IRM interacts with the urban traffic control system and its nearest Intelligent Roadside Unit (IRSU) to regulate the flow of traffic from urban to freeway network. The FTCA consists of a network of mutually interacting IRSUs which monitor traffic flow, communicate with IRMs for providing traffic guidance for freeway drivers. An IRSU will communicate with the vehicles in the zone managed by it in order to provide information on rerouting when road and weather conditions warrant it. It also facilitates exchange of information between vehicles, guide them in lane changes and maintaining safe distance in order to avoid collision. [ABSTRACT FROM AUTHOR]