Search

Traffic control through video/image processing is a trending research topic within Intelligent Transportation Systems. The number of moving vehicles, the density of vehicles at the junctions, traffic anomalies, and traffic flow directly influence real-time traffic congestion. The primary goal of this work is to design an architecture that is simple and fast enough to use in real-time heterogeneous traffic scenes. The proposed methodology uses user-defined zones for determining vehicle occupancy and count based on traffic surveillance video. The angular integral projection function accompanies the background subtraction method for better localization. Traffic anomaly detection is implemented by incorporating intelligent sensor technology. Also, the skipping of frames at fixed intervals has increased the processing speed with minimal data loss. The compatibility with any Internet Protocol camera further distinguishes this approach from other state-of-the-art methods. The proposed algorithm has been tested on a publicly available traffic surveillance video dataset and real-time surveillance feeds. Experimental results from the real-time intersection scenes show an overall accuracy of 97.14% and an average processing speed of 92.91%. The accuracy of the detection module in the custom-made dataset is 98.73%. [ABSTRACT FROM AUTHOR]

Efficient traffic signal management is crucial for regulating traffic flow and fostering sustainable development within road transportation systems. To address the challenges in traffic management, numerous studies have applied the Adaptive Traffic Signal Control (ATSC) technology, using Deep Reinforcement Learning (DRL) to decrease vehicles' average waiting times. Nonetheless, the intricate nature of DRL, characterized by its extensive parameter connections, often complicates the assurance of real-time responsiveness. Additionally, by prioritizing reduced waiting times, these methods may overlook potential rises in queue lengths, risking congestion. In this paper, we propose an Efficient Double Broad Reinforcement Learning (E-DBRL) algorithm based on a Double Broad Q-Network (Double BQN) to alleviate the overestimation of action values common in Broad Reinforcement Learning (BRL). To enhance the Quality of Experience (QoE) of drivers, we develop a new reward function that optimizes the average waiting time and the range between the longest and shortest waiting times, thus avoiding the need for dimension normalization. Moreover, we conduct simulation experiments using actual traffic data collected from Hangzhou, China. The experimental results indicate that, compared to the traditional Double DQN, the proposed E-DBRL algorithm achieves a 45.78% reduction in the average training time per round and a 5.57% increase in the average rewards. [ABSTRACT FROM AUTHOR]

Cooperation between intersections in large-scale road networks is critical in traffic congestion. Currently, most traffic signals cooperate via pre-defined timing phases, which is extremely inefficient in real-time traffic scenarios. Most existing studies on multi-agent reinforcement learning (MARL) traffic signal control have focused on designing efficient communication methods, but have ignored the importance of how agents interact in cooperative communication. To achieve more efficient cooperation among traffic signals and alleviate urban traffic congestion, this study constructs a Graph Cooperation Q-learning Network Traffic Signal Control (GCQN-TSC) model, which is a graph cooperation network with an embedded self-attention mechanism that enables agents to adjust their attention in real time according to the dynamic traffic flow information, perceive the traffic environment quickly and effectively in a larger range, and help agents achieve more effective collaboration. Moreover, the Deep Graph Q-learning (DGQ) algorithm is proposed in this model to optimize the traffic signal control strategy according to the spatio-temporal characteristics of different traffic scenes and provide the optimal signal phase for each intersection. This study also integrates the ecological traffic concept into MARL traffic signal control, which aims to reduce traffic exhaust emissions. Finally, the proposed GCQN-TSC is experimentally validated both in a synthetic traffic grid and a real-world traffic network using the SUMO simulator. The experimental results show that GCQN-TSC outperforms other traffic signal control methods in almost all performance metrics, including average queue length and waiting time, as it can aggregate information acquired from collaborative agents and make network-level signal optimization decisions. [ABSTRACT FROM AUTHOR]

Short-term traffic flow forecasting is a key problem in the area of intelligent transportation systems (ITS). Timely and accurate traffic state prediction is also the prerequisite of realizing proactive traffic control and dynamic traffic assignment effectively. In this paper, a new hybrid model for short-term traffic flow forecasting, which is built based on multifractal characteristics of traffic flow time series, is proposed. The hybrid model decomposes traffic flow series into four different components, namely a periodic part, a trend part, a stationary part and a volatility part, to unearth the traffic features hidden behind the data. Four parts are treated and modeled separately by using different methods, such as spectral analysis, time series and statistical volatility analysis, to further explore the underlying traffic patterns and improve forecasting accuracy. Performance of the proposed hybrid model is investigated with traffic flow data from freeway I-694 EB in the Twin Cities. The experimental results indicate that the proposed model outperforms in capturing nonlinear volatility and improving forecasting accuracy than traditional forecasting methods, especially for the multi-step ahead forecasting. Compared with the ARIMA-GARCH model, it gets an improvement of 8.23% in RMSE for one-step ahead forecasting and 10.69% for ten-step ahead forecasting. It is better than the hybrid model newly proposed in literature (Zhang et al. Transp Res Part C: Emerg Technol 43(1):65-78 2014) and gets an improvement of 1.27% in forecasting accuracy. [ABSTRACT FROM AUTHOR]

Purpose: Road traffic incidents cause delay, affect public safety and the environment. The CEDR PRIMA project aims to extend practical guidance for traffic managers in pro-active Traffic Incident Management (TIM) techniques to reduce the impacts and associated costs of incidents. Methods: The paper describes modelling methods used in the project for assessing the effect of different management techniques on incident duration and travel delay under various scenarios, including collision, adverse weather, heavy vehicle breakdown and other obstruction, assuming various management strategies and generic impacts of novel technologies. Macroscopic simulations of 178 variations of 13 basic scenarios have been performed using a flexible and computationally efficient macroscopic queue model, results being verified by simulation using a velocity-based Cell Transmission Model (CTM-v). Results: The results of the two modelling methods are broadly consistent. While delays estimated by the two methods can differ by up to 20%, this is small compared to the factor of 30 range of modelled delays caused by incidents, depending on their nature and circumstances, and is not sufficient to affect general conclusions. Under the peak traffic conditions assumed, the most important factor affecting delay is whether running lanes can be kept open, but quick clearance of carriageway is not always feasible. Conclusions: Comparison of two very different modelling methods confirms their consistency within the context of highly scenario-dependent results, giving confidence in the results. Future research and data needs include further validation of the models, potential application to traffic flow and conflict prediction and incident prevention, and more complete and consistent recording of incident timelines and impacts. [ABSTRACT FROM AUTHOR]

Dynamic traffic assignment (DTA) is at the heart of much ITS research. Assigning traffic, whether for planning purposes or for real time route guidance, is a difficult problem. Recent advances in user-optimal dynamic traffic assignment have built on the methods developed for static user-optimal assignments. Since assignment models are complex, they will not use many of the network analysis functions found in commercial GIS packages. Custom software will have to be developed. In this paper we explore the problems faced in solving static and dynamic assignments and relate those problems to information that is likely to be based in a traffic control center’s GIS database. Because of the size of the problem and the need for faster-than-real-time analysis, how and when data is transferred between a GIS to analysis modules is important. Further, many approaches for GIS software design and spatial data handling, such as OOP and dynamic segmentation, may impose too much overhead to be of much use in time-sensitive ITS applications. [ABSTRACT FROM AUTHOR]

Introduction: Due to the menacing increase in the number of vehicles on a daily basis, abating road congestion is becoming a key challenge these years. To cope-up with the prevailing traffic scenarios and to meet the ever-increasing demand for traffic, the urban transportation system needs effective solution methodologies. Changes made in the urban infrastructure will take years, sometimes may not even be feasible. For this reason, traffic signal timing (TST) optimization is one of the fastest and most economical ways to curtail congestion at the intersections and improve traffic flow in the urban network. Purpose: Researchers have been working on using a variety of approaches along with the exploitation of technology to improve TST. This article is intended to analyze the recent literature published between January 2015 and January 2020 for the computational intelligence (CI) based simulation approaches and CI-based approaches for optimizing TST and Traffic Signal Control (TSC) systems, provide insights, research gaps and possible directions for future work for researchers interested in the field. Methods: In analyzing the complex dynamic behavior of traffic streams, simulation tools have a prominent place. Nowadays, microsimulation tools are frequently used in TST related researches. For this reason, a critical review of some of the widely used microsimulation packages is provided in this paper. Conclusion: Our review also shows that approximately 77% of the papers included, utilizes a microsimulation tool in some form. Therefore, it seems useful to include a review, categorization, and comparison of the most commonly used microsimulation tools for future work. We conclude by providing insights into the future of research in these areas. [ABSTRACT FROM AUTHOR]