Search

Among several existing technologies, solar pasteurization is widely accepted as a reliable and cost-effective method for the removal of microbial pathogens from water. This work reports nanophotonics-triggered thermally enhanced solar water disinfection bottles (nano-SODIS) designed rationally by coating plasmonic carbon nanoparticles (CNP) on the outer surface for the targeted pathogen inactivation from water. The cost-effective CNP nanophotonic material used in this work has high efficiency in harvesting solar radiation and dissipating the heat locally. It has broad absorption efficiency to cover the entire solar spectrum; hence, it is capable to generate multiple scattering. It has also properties of boosting of photon absorption and focusing the light within a constrained spatial region, resulting in powerful and targeted heating that inactivates microorganisms in near proximity. These CNPs were used to coat the nano-SODIS water bottles that achieved the highest temperature of 65-70 °C within 90 min of exposure to solar radiation with a consequent six-log reduction. The disinfection period was reduced by a factor of 3 compared to the conventional solar disinfection system. The treated water was further assessed for 7 days, which confirmed the complete absence of bacteria and no sign of regeneration after storing for a longer period. The SODIS bottles coated with CNP thus overcome the problem of limited solar absorption by acquiring higher broadband absorption potential and thus achieving comparatively high disinfection efficiency. The broad band absorption of CNP was confirmed through UV-DRS absorption spectra. The nano-SODIS bottles designed and constructed in this work are simple, durable, and user friendly in nature and have been deployed in the rural and slums areas of Nagpur, Delhi, and Mumbai, India to provide pathogen-free potable water and to improve the health of local poor communities., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Silk is the strongest natural biopolymer produced by silk worms possessing superior adsorbent properties and thus extensively used in various applications. The present study involved the preparation of powder form of a silk fibroin materials and their application in adsorption of heavy metals, particularly, iron from aqueous solution. The morphological and structural characteristic properties of this promising materials were examined by using different analytical techniques. Batch experiments were conducted within feasible parametric ranges to understand the effect of dose, time, concentration, pH, and reusability. Silk fibroin was effective for iron adsorption over a wide range of pH 6 to 10. The adsorption removal efficiency of 98% was attained for removal of iron from contaminated water at moderate dose of 0.25 g and contact time of 60 min, which is unprecedented by considering the environment benign nature of the material. The data was examined in different isotherm models wherein it fitted best in Langmuir adsorption model. Similarly, Langmuir isotherm model, with R 2 value of 0.984 and K L 0.412 and maximum adsorption capacity as 12.82 mg g -1 , suggests monolayer adsorption. Kinetic study with better R 2 value of 0.941 represented the pseudo-second order kinetics governed by the chemisorption reaction. To understand the practical applicability of silk fibroin, the repeatability study up to 5 cycles were performed. The findings are very encouraging which confirmed the usage of silk fibroin as adsorbent for multiple cycles with marginal decrease in adsorption efficiency. Eventually, the material was tested for iron removal in real contaminated water which revealed its potential and selectivity for removal of iron in different matrix., (© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Adsorption of three pharmaceuticals and personal care products (PPCPs), namely caffeine, ibuprofen and triclosan on commercial powdered activated carbon was examined in aqueous medium. The contaminants were chosen based on their diverse log K ow (octanol-water partition coefficient) viz. - 0.07 for caffeine, 3.97 for ibuprofen and 4.76 for triclosan to examine the role of hydrophobicity on adsorption process. The adsorbent characterisation was achieved using BET surface area, SEM, pore size distribution studies and FTIR. Influence of mass of PAC, contact time, solution pH and initial concentration on adsorption capacity of PAC was studied. Adsorption isotherms and kinetics were applied to establish the mechanism of adsorption. The kinetics followed pseudo-second order with physisorption occurring through particle diffusion. The Freundlich model fitted best among the isotherm models. The adsorption capacity increased in the order CFN < IBU < TCS which correlates with increasing hydrophobicity (log K ow ), molecular weight and decreasing water solubility, respectively. We conclude that micro-pollutant hydrophobicity contributes towards adsorption on activated carbon.