Search

The current state of far-infrared astronomy drives the need to develop compact, sensitive spectrometers for future space and ground-based instruments. Here we present details of the $\rm \mu$-Spec spectrometers currently in development for the far-infrared balloon mission EXCLAIM. The spectrometers are designed to cover the $\rm 555 - 714\ \mu$m range with a resolution of $\rm R\ =\ \lambda / \Delta\lambda\ =\ 512$ at the $\rm 638\ \mu$m band center. The spectrometer design incorporates a Rowland grating spectrometer implemented in a parallel plate waveguide on a low-loss single-crystal Si chip, employing Nb microstrip planar transmission lines and thin-film Al kinetic inductance detectors (KIDs). The EXCLAIM $\rm \mu$-Spec design is an advancement upon a successful $\rm R = 64\ \mu$-Spec prototype, and can be considered a sub-mm superconducting photonic integrated circuit (PIC) that combines spectral dispersion and detection. The design operates in a single $M{=}2$ grating order, allowing one spectrometer to cover the full EXCLAIM band without requiring a multi-order focal plane. The EXCLAIM instrument will fly six spectrometers, which are fabricated on a single 150 mm diameter Si wafer. Fabrication involves a flip-wafer-bonding process with patterning of the superconducting layers on both sides of the Si dielectric. The spectrometers are designed to operate at 100 mK, and will include 355 Al KID detectors targeting a goal of NEP ${\sim}8\times10^{-19}$ $\rm W/\sqrt{Hz}$. We summarize the design, fabrication, and ongoing development of these $\rm \mu$-Spec spectrometers for EXCLAIM., Comment: 9 pages, 5 figures, to appear in the Proceedings of the SPIE Astronomical Telescopes + Instrumentation (2022)

This work describes the optical design of the EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM). EXCLAIM is a balloon-borne telescope that will measure integrated line emission from carbon monoxide (CO) at redshifts z < 1 and ionized carbon ([CII]) at redshifts z = 2.5-3.5 to probe star formation over cosmic time in cross-correlation with galaxy redshift surveys. The EXCLAIM instrument will observe at frequencies of 420--540 GHz using six microfabricated silicon integrated spectrometers with spectral resolving power R = 512 coupled to kinetic inductance detectors (KIDs). A completely cryogenic telescope cooled to a temperature below 5 K provides low-background observations between narrow atmospheric lines in the stratosphere. Off-axis reflective optics use a $90$-cm primary mirror to provide 4.2' full-width at half-maximum (FWHM) resolution at the center of the EXCLAIM band over a field of view of 22.5'. Illumination of the 1.7 K cold stop combined with blackened baffling at multiple places in the optical system ensures low (< -40 dB) edge illumination of the primary to minimize spill onto warmer elements at the top of the dewar., 15 pages, 8 figures

Photon-counting detectors address the single most difficult technology challenge for the Origins Space Telescope (OST) and are highly desirable for reaching the ~ 10^-20 W/√Hz sensitivity permitted by the observatory. One objective of this facility is rapid spectroscopic surveys of the high redshift universe at 420 – 800 μm, using arrays of integrated spectrometers with moderate resolutions (R = λ/Δλ ~1000), to explore galaxy evolution and growth of structure in the universe. A second objective is to perform higher resolution (R > 100,000) spectroscopic surveys at 20–300 μm for exploring the distribution of the ingredients for life in protoplanetary disks. Lastly, the OST aims to do sensitive mid-infrared (5–30 μm) spectroscopy of rocky planet atmospheres in the habitable zone using the transit method. These objectives represent a well-organized community agreement, but they are impossible to reach without a significant leap forward in detector technology, and the OST is likely not to be recommended if a path to suitable detectors does not exist. Our team is developing photon-counting Kinetic Inductance Detectors (KIDs) for the OST. Since KIDs are highly multiplexable in nature their scalability will be a major improvement over current technologies that are severely limited in observing speed due to small numbers of pixels. Moreover, KIDs are an established strong competitor to TESs and have achieved NEP ~ 1.5—3x10^-19 W/√Hz in a fully operational 1000-pixel science grade array made by SRON under the SpaceKID program. To reach the sensitivities for OST we are developing KIDs made from very thin aluminum films on single-crystal silicon substrates. Under the right conditions, small-volume inductors made from these films can become ultra-sensitive to single photons >90 GHz. Understanding the material physics and electrodynamics of excitations in these superconductor-dielectric systems is critical to performance. We have achieved world-record material properties, which are within requirements for photon-counting: microwave quality factor of 0.5 x 10^6 for a 10-nm aluminum resonator at single microwave photon drive power, residual dark electron density of 95% efficiency at 0.5 - 1.0 THz is achievable. Combined with µ-Spec - our Goddard-based on-chip far-IR spectrometer - these detectors will enable the first OST science objective mentioned above, and provide a clear path for the shorter wavelength objectives as well.

Micro-Spec is a compact sub-millimeter (approximately 100 GHz--1:1 THz) spectrometer which uses low loss superconducting microstrip transmission lines and a single-crystal silicon dielectric to integrate all of the components of a diffraction grating spectrometer onto a single chip. We have already successfully evaluated the performance of a prototype Micro-Spec, with spectral resolving power, R=64. Here we present our progress towards developing a higher resolution Micro-Spec, which would enable the first science returns in a balloon flight version of this instrument. We describe modifications to the design in scaling from a R=64 to a R=256 instrument, as well as the ultimate performance limits and design concerns when scaling this instrument to higher resolutions.

Four astrophysics missions are currently being studied by NASA as candidate large missions to be chosen in the 2020 astrophysics decadal survey.1 One of these missions is the “X-Ray Surveyor” (XRS), and possible configurations of this mission are currently under study by a science and technology definition team (STDT). One of the key instruments under study is an X-ray microcalorimeter, and the requirements for such an instrument are currently under discussion. In this paper we review some different detector options that exist for this instrument, and discuss what array formats might be possible. We have developed one design option that utilizes either transition-edge sensor (TES) or magnetically coupled calorimeters (MCC) in pixel array-sizes approaching 100 kilo-pixels. To reduce the number of sensors read out to a plausible scale, we have assumed detector geometries in which a thermal sensor such a TES or MCC can read out a sub-array of 20-25 individual 1” pixels. In this paper we describe the development status of these detectors, and also discuss the different options that exist for reading out the very large number of pixels.

The far-infrared and submillimeter portions of the electromagnetic spectrum provide a unique view of the astro-physical processes present in the early universe. Our ability to fully explore this rich spectral region has beenlimited, however, by the size and cost of the cryogenic spectrometers required to carry out such measurements.Micro-Spec ( -Spec) is a high-sensitivity, direct-detection spectrometer concept working in the 450{1000 mwavelength range which will enable a wide range of ight missions that would otherwise be challenging due tothe large size of current instruments with the required spectral resolution and sensitivity. The spectrometer de-sign utilizes two internal antenna arrays, one for transmitting and one for receiving, superconducting microstriptransmission lines for power division and phase delay, and an array of microwave kinetic inductance detectors(MKIDs) to achieve these goals. The instrument will be integrated on a 10 cm 2 silicon chip and can thereforebecome an important capability under the low background conditions accessible via space and high-altitudeborne platforms. In this paper, an optical design methodology for -Spec is presented, with particular attentiongiven to its two-dimensional di ractive region, where the light of di erent wavelengths is focused on the di erentdetectors. The method is based on the maximization of the instrument resolving power and minimization of theRMS phase error on the instrument focal plane. This two-step optimization can generate geometrical con gu-rations given speci c requirements on spectrometer size, operating spectral range and performance. Two pointdesigns with resolving power of 260 and 520 and an RMS phase error less than 0:004 radians were developedfor initial demonstration and will be the basis of future instruments with resolving power up to about 1200.Keywords: Far-infrared, submillimeter, spectroscopy

We report on the status and development of polarization-sensitive detectors for millimeter-wave applications. The detectors are fabricated on single-crystal silicon, which functions as a low-loss dielectric substrate for the microwave circuitry as well as the supporting membrane for the Transition-Edge Sensor (TES) bolometers. The orthomode transducer (OMT) is realized as a symmetric structure and on-chip filters are employed to define the detection bandwidth. A hybridized integrated enclosure reduces the high-frequency THz mode set that can couple to the TES bolometers. An implementation of the detector architecture at Q-band achieves 90% efficiency in each polarization. The design is scalable in both frequency coverage, 30-300 GHz, and in number of detectors with uniform characteristics. Hence, the detectors are desirable for ground-based or space-borne instruments that require large arrays of efficient background-limited cryogenic detectors., Comment: 7 pages, 3 figures, Presented at SPIE Astronomical Telescopes and Instrumentation 2014: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VII. To be published in Proceedings of SPIE Volume 9153

The Cosmology Large Angular Scale Surveyor (CLASS) is an experiment to measure the signature of a gravita-tional-wave background from inflation in the polarization of the cosmic microwave background (CMB). CLASS is a multi-frequency array of four telescopes operating from a high-altitude site in the Atacama Desert in Chile. CLASS will survey 70\% of the sky in four frequency bands centered at 38, 93, 148, and 217 GHz, which are chosen to straddle the Galactic-foreground minimum while avoiding strong atmospheric emission lines. This broad frequency coverage ensures that CLASS can distinguish Galactic emission from the CMB. The sky fraction of the CLASS survey will allow the full shape of the primordial B-mode power spectrum to be characterized, including the signal from reionization at low $\ell$. Its unique combination of large sky coverage, control of systematic errors, and high sensitivity will allow CLASS to measure or place upper limits on the tensor-to-scalar ratio at a level of $r=0.01$ and make a cosmic-variance-limited measurement of the optical depth to the surface of last scattering, $\tau$., Comment: 23 pages, 10 figures, Presented at SPIE Astronomical Telescopes and Instrumentation 2014: Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy VII. To be published in Proceedings of SPIE Volume 9153

Kinetic inductance detectors (KIDs) are a promising technology for low-noise, highly-multiplexible mm- and submm-wave detection. KIDs have a number of advantages over other detector technologies, which make them an appealing option in the cosmic microwave background B-mode anisotropy search, including passive frequency domain multiplexing and relatively simple fabrication, but have suffered from challenges associated with noise control. Here we describe design and fabrication of a 20-pixel prototype array of lumped element molybdenum KIDs. We show Q, frequency and temperature measurements from the array under dark conditions. We also present evidence for a double superconducting gap in molybdenum.

The cosmic microwave background (CMB) provides a powerful tool for testing modern cosmology. In particular, if inflation has occurred, the associated gravitational waves would have imprinted a specific polarized pattern on the CMB. Measurement of this faint polarized signature requires large arrays of polarization-sensitive, background- limited detectors, and an unprecedented control over systematic effects associated with instrument design. To this end, the ground-based Cosmology Large Angular Scale Surveyor (CLASS) employs large-format, feedhorn- coupled, background-limited Transition-Edge Sensor (TES) bolometer arrays operating at 40, 90, and 150 GHz bands. The detector architecture has several enabling technologies. An on-chip symmetric planar orthomode transducer (OMT) is employed that allows for highly symmetric beams and low cross-polarization over a wide bandwidth. Furthermore, the quarter-wave backshort of the OMT is integrated using an innovative indium bump bonding process at the chip level that ensures minimum loss, maximum repeatability and performance uniformity across an array. Care has been taken to reduce stray light and on-chip leakage. In this paper, we report on the architecture and performance of the first prototype detectors for the 40 GHz focal plane.

One of the most exciting targets for cosmic microwave background (CMB) polarization measurements is the faint signal from the primordial gravity waves predicted by inflationary models. Currently existing experiments and those under construction would constrain or detect such a signal at around r = 0.01, where r is the tensor to scalar ratio. In order to further improve the measurement, experiments for the next generation have to combine the following three: 1) excellent sensitivity, 2) multi-frequency measurement for the removal of galactic foregrounds, and 3) well-controlled systematics. We propose the Multimoded Survey Experiment (MuSE), which uses highly multimoded polarization-sensitive bolometers developed at NASA Goddard Space Flight Center (GSFC). MuSE, consisting of 69 pixels, will achieve a sensitivity equivalent to several thousand single-moded bolometers. Each pixel can be configured to be sensitive to a different frequency band, allowing very wide frequency coverage by a single focal plane. This enables us to clean galactic synchrotron and dust components with our data alone. MuSE achieves an effective array sensitivity to the CMB of 8 μK√s even after accounting for the sensitivity degradation from foreground removal and reaches a 2-σ error on r of 0.009 with two years of operation.

We have fabricated absorber-coupled microwave kinetic inductance detector (MKID) arrays for sub-millimeter and far-infrared astronomy. Each detector array is comprised of lambda/2 stepped impedance resonators, a 1.5 micrometer thick silicon membrane, and 380 micrometer thick silicon walls. The resonators consist of parallel plate aluminum transmission lines coupled to low impedance Nb microstrip traces of variable length, which set the resonant frequency of each resonator. This allows for multiplexed microwave readout and, consequently, good spatial discrimination between pixels in the array. The Al transmission lines simultaneously act to absorb optical power and are designed to have a surface impedance and filling fraction so as to match the impedance of free space. Our novel fabrication techniques demonstrate high fabrication yield of MKID arrays on large single crystal membranes and sub-micron front-to-back alignment of the microstrip circuit.

X-ray microcalorimeters using magnetic sensors show great promise for use in astronomical x-ray spectroscopy. We have begun to develop technology for fabricating arrays of magnetic calorimeters for X-ray astronomy. The magnetization change in each pixel of the paramagnetic sensor material due to the heat input of an absorbed x-ray is sensed by a meander shaped coil. With this geometry it is possible to obtain excellent energy sensitivity, low magnetic cross-talk and large format arrays fabricated on wafers that are separate from the SQUID read-out. We report on the results from our prototype arrays, which are coupled to low noise 2-stage SQUIDs developed at the PTB Berlin. The first testing results are presented and the sensitivity compared with calculations.

PAPPA is a balloon-based experiment designed to measure the polarization of the Cosmic Microwave Background using candidate technology for an eventual Einstein Inflation Probe mission. It will survey a 20° × 20° patch of sky with 0.5° angular resolution covering 3 passbands centered at 89, 212 and 302 GHz. Detection will be accomplished via antenna-coupled transition edge sensors (TESs) with SQUID-based readouts. In the eventual flight package, band defining filters and MEMS-based polarization modulators will be incorporated into the superconducting microstrip transmission lines that terminate in resistors that are thermally coupled to the TESs. The MEMS switches will allow on-chip polarization modulation that is faster than significant detector gain variations. The initial configuration will incorporate a simplified focal plane augmented by quasioptical polarization modulation. We describe the overall instrument design and present a summary of the current progress.

We discuss a new type of direct detector, a silicon hot-electron bolometer, for measurements in the far-infrared and submillimeter spectral ranges. High performance bolometers can be made using the electron-phonon conductance in heavily doped silicon to provide thermal isolation from the cryogenic bath. Noise performance is expected to be near thermodynamic limits, allowing background limited performance for many far infrared and submillimeter photometric and spectroscopic applications.

We are developing a new type of detector for observational cosmology and astrophysical research. Incoming radiation from the sky is coupled to a superconducting microstrip transmission line that terminates in a thin film absorber. At sub-Kelvin temperature, the thermal isolation between the electrons and the lattice makes it possible for the electrons in the small absorber (100's of cubic micro-meter) and superconducting bilayer (Transition Edge Sensor) to heat up by the radiation absorbed by the electrons of the normal absorbing layer. We call this detector a Transition-edge Hot-electron Micro-bolometer (THM). THMs can be fabricated by photo lithography, so it is relatively easy to make matched detectors for a large focal plane array telescope. We report on the thermal properties of Mo/Au THMs with Bi/Au absorbers.

We have investigated the noise performance of MoAu-bilayer TES bolometers designed for infrared detectors. A set of devices with variations in geometry were fabricated at the NASA/GSFC detector development facility. These detectors have different bilayer aspect ratios and have varieties of normal metal regions deposited on top of the bilayer to study the effects of geometry on noise. These normal metal regions are oriented either parallel or transverse to the direction of current flow, or both. The lowest noise detectors are found to have normal metal regions oriented transversely. Our detectors with the most favorable design feature negligible excess noise in the in-band region, only slight excess noise in the out-of-band region, and low 1/f noise. The detectors are successfully used in the Submillimeter Broadband Spectrometer FIBRE which is used for astronomical observations at the Caltech Submillimeter Observatory.

We are developing superconducting direct detectors for submillimeter astronomy that can in principle detectindividual photons. These devices, Single Quasiparticle Photon Counter (SQPC), operate by measuring thequasiparticles generated when single Cooper-pairs are broken by absorption of a submillimeter photon. Thisphotoconductive type of device could yield high quantum efficiency, large responsivity, microsecond responsetimes, and sensitivities in the range of 10 -20 Watts per root Hertz. The use of antenna coupling to a smallabsorber also suggests the potential for novel instrument designs and scalability to imaging or spectroscopicarrays. We will describe the device concept, r ecent results on fabrication and electrical characterization of thesedetectors, issues related to saturation and optimization of the device parameters. Finally, we have developedpractical readout amplifiers for these high-impedance cryogenic detectors based on the Radio-FrequencySingle-Electron Transistor (RF-SET). We will describe results of a demonstration of a transimpedanceamplifier based on closed-loop operation of an RF-SET, and a demonstration of a wavelength-divisionmultiplexing scheme for the RF-SET. These developments will be a key ingredient in scaling to large arrays ofhigh-sensitivity detectors.Keywords: submillimeter, superconducting detector