Search

Depending on the retroreflective distribution measuring device, three sets of controlled experiments were designed. To obtain the retroreflective distribution of road traffic markings, the coefficient of retroreflected luminance (RL) changes of road traffic markings under different measurement geometry was analyzed. Several observation angles commonly used in retroreflection measurements were selected. The deviation range of vertical entrance angles was set to 8°. The horizontal entrance angles were selected according to the horizontal measurement angle of a mobile retroreflectometer unit. A white road traffic marking sample, which measured 10 mm × 46 mm, was used in the experiments. The results showed that the retroreflective distribution of road traffic markings was not uniform, the influence of the change of observation angle on the RL was greater than the entrance angle, and the change of retroreflection in the direction of the vertical entrance angle was more obvious than the horizontal entrance angle.

Retroreflective traffic markings are frequently used on roadways to provide guidance to drivers as supplements to regular markings. Portable retroreflectometers are widely used to measure the photometric characteristic of retroreflective traffic markings at present. Portable retroreflectometers include an internal light source and photoreceptors. It is based on the substitution method. Substitution relies on the use of calibrated reference plate. The traffic marking has a low coefficient of retroreflected luminance. It is difficult to measure the coefficient by direct measurement method. The direct measurement method cannot assign measurement values to the reference plates. The paper proposes a new measurement method to solve the problem of measuring the photometric characteristic of the retroreflective traffic marking. It is called the expanded direct luminous intensity method, and it is different from the four methods in JT/T 690 Test Method for Photometric Characteristics of Retroreflectors. The expanded direct luminous intensity method based on CIE angular reference system. A calibrated standard source A illuminates the specimen at a distance of 15 m from the specimen. And a calibrated low-light illuminometer is used to measure the retroreflectivity of the specimen. The paper built a standard system according to this method. The measurement uncertainty of the system is 3.1% while k is 2. After comparing with several different kinds of portable retroreflectometers, the results were satisfactory. Studies have shown that this method and standard system can not only calibrate the reference plates, but also measure the photometric characteristic of retroreflective traffic markings specimens.