Search

This paper is the result of research and operation modeling of the new systems for cooling of cutting tools based on thermoelectric module. A copper inlay with thermoelectric module on the back side was added to a standard turning tool for metal processing. For modeling and simulating the operation of thermoelectric module, finite element method was used as a method for successful solving the problems of inhomogeneous transient temperature field on the cutting tip of lathe knives. Developed mathematical model is implemented in the software package PAK-T through which numerical results are obtained. Experimental research was done in different conditions of thermoelectric module operation. Cooling of the hot module side was done by a heat exchanger based on fluid using automatic temperature regulator. After the calculation is done, numerical results are in good agreement with experimental. It can be concluded that developed mathe-matical model can be used successfully for modeling of cooling of cutting tools. [ABSTRACT FROM AUTHOR]

In this paper analysis of stress and thermal-elastic-plastic strain of the drum is performed. Influence of modified thickness, yield stress and finite element model of welded joint between pipe and drum on assessment of the remaining lifetime of the drum in the thermal power plant is analyzed. Two analyses are compared. In the first, drum is modeled by shell and by 3-D finite elements with projected geometrical and material data of drum. Then, the drum is modeled by shell and by 3-D finite elements with modified thickness and yield stress. The analysis show that detailed modeling of stress concentration zones is necessary. Adequate modeling gives lower maximal effective plastic strain and increased number of cycles and, in that case, 3-D finite elements are better comparing to shell finite elements. [ABSTRACT FROM AUTHOR]

This paper deals with transient non-linear heat conduction through the insulation wall of the tank for transportation of liquid aluminum. Tanks designed for this purpose must satisfy certain requirements regarding temperature of loading and unloading, during transport. Basic theoretical equations are presented, which describe the problem of heat conduction finite element analysis, starting from the differential equation of energy balance, taking into account the initial and boundary conditions of the problem. General 3-D problem for heat conduction is considered, from which solutions for two- and one-dimensional heat conduction can be obtained, as special cases. Forming of the finite element matrices using Galerkin method is briefly described. The procedure for solving equations of energy balance is discussed, by methods of resolving iterative processes of non-linear transient heat conduction. Solution of this problem illustrates possibilities of PAK-T software package, such as materials properties, given as tabular data, or analytical functions. Software also offers the possibility to solve non-linear and transient problems with incremental methods. Obtained results for different thicknesses of the tank wall insulation materials enable its comparison in regards to given conditions. [ABSTRACT FROM AUTHOR]