Search

The influence of humic substances on the electrochemical treatment of solutions resulting from the remediation of atrazine contaminated soil has been investigated. In particular the effect on the hydrogen peroxide production stage and the effect on the hydroxyl radical oxidation treatment have been separately studied. In order to quickly assess the possible inhibition of the removal, an inorganic system has been adopted as a standard system. The results confirm the validity of electrochemical technologies also for the treatment of a real effluent where a matrix effect is expected since the organic matter content affects only the hydrogen peroxide production.

In this study a process for the remediation of soils contaminated by lead or copper is proposed, consisting of the operations in sequence: soil flushing, membrane treatment, acidification, and metal precipitation. Pb(II) and Cu(II) extraction from a synthetically contaminated soil using a 0.05 M EDTA aqueous solution were investigated in column. The metal removal efficiencies and the final soil metal concentration were 98.2% and 37.96 mg/g respectively for lead and 95.4% and 59.20 mg/kg for copper. The extracted solutions were concentrated through a membrane treatment to reduce the water content up to the 75% and to obtain a permeate metal concentration in compliance with the Italian Environmental Regulation. The recovery of the used EDTA from the retentate solution, with recovery yield of at least 85.4%, was also obtained through acidification. Metal precipitation from the filtered solution was then performed according two different methods, achieving metal removal yield of more than 99.4%.

In the present work a Fenton's treatment for the oxidation of a phosphorous compounds mixture, simulating a match manufacturing industry wastewater, were studied. Experimental tests were performed on three sample solutions at a phosphorus concentration of 250, 500 and 750 mg/l. In each solution an equal amount of sodium phosphite and sodium hypophosphite was dissolved. The investigation of pH, temperature and reagents ratio on the oxidation rate led to the individuation of the optimal process operating conditions. The results show that Fenton's reagent provides a powerful conversion to phosphate of the phosphorous solution. In particular at pH=3.5 and 20 degrees C a residual concentration of non oxidized phosphorus in compliance with the Italian regulation limits for industrial wastewater disposal. Tests performed on sample solution of 500 mg/l P and 750 mg/l P by adding hydrogen peroxide and bivalent iron in three sequential steps led to similar reaction efficiencies to tests carried out adding both Fenton's reagents in one step, but with a remarkably lower reagents consumption.

The different currently used Fenton-type treatments, either chemically or electrochemically generated, are reviewed. A particular attention is devoted to the traditional Fe++/H2O2 chemical process and to the indirect electrochemical oxidation which uses in situ generated hydrogen peroxide. Mechanisms and experimental conditions employed for the optimisation of each technology are reported; moreover advantages and main limitations are discussed.

The electrochemical oxidation of an atrazine solution obtained from a flushing treatment of a contaminated soil was investigated. The influence of ethanol on atrazine oxidation was studied. Results show that the electrogenerated Fenton's reagent provides a complete degradation of atrazine and its main chlorinated by-products via N-dehalkylation and dechlorination. This process therefore presents an effective alternative to the chemical oxidation treatment which necessarily needs a further biological state.