Search

The foaming of PP has encountered challenges because of its low melt strength and semi-crystalline characteristics. Introducing long chain branching (LCB) onto the PP backbone and the addition of particles as cell nucleating agent are the commonly used methods to improve the cell structure of PP foams. In this paper, clay-supported sodium benzoate (NaB-OMMT) was prepared from Na-montmorillonite (Na-MMT) via the partial ion exchange reaction with surfactant and subsequent reaction with benzoic acid. The as prepared NaB-OMMTs were then applied to prepare LCBPP/NaB-OMMT nanocomposites and their foams. The dispersion state of clay, crystallization behaviors and rheological properties of the nanocomposites, as well as the cell structure and compression properties of the foams were investigated. The results show that clay layers are mostly exfoliated in the nanocomposites with low NaB-OMMT content, while intercalated layers dominant with the content reaches 2% or higher. The melting temperature of the nanocomposites decreases and the crystallinity increases, while the spherulite size decreases compared to LCBPP. The melt viscosity and elasticity of nanocomposites increase significantly when the content of NaB-OMMT reaches 2% or higher. LCBPP/NaB-OMMT nanocomposites foams exhibit higher cell density, smaller cell size and its standard deviation. Therein, the foam with 1% of NaB-OMMT shows the maximum cell density and the minimum cell size. It is concluded that the cell structure of the foam is highly dependent on the content, dispersion state and structure of the cell nucleating agent. When NaB is supported on well dispersed and exfoliated clay layers, the cell nucleation efficiency is significantly enhanced. The compression properties of the foams depend on their cell structures and exhibit the similar variation trend with the latter with the content of NaB-OMMT increasing. Graphical Abstract [ABSTRACT FROM AUTHOR]

Ganpu tea is a novel type of beverage produced from Pu-erh tea stuffed in the pericarp of Citrus reticulata "Chachi". It has gained considerable popularity in China owing to its inviting flavor and health effects. However, the in vivo metabolites of Ganpu tea, which may contribute to its overall health effects, are still unclear. In the present work, rat urine and feces samples were collected after oral administration of Ganpu tea extract (GTE), and then subjected to ultra-high-performance liquid chromatography/quadrupole-time-of-flight tandem mass spectrometry (UHPLC-Q-TOF-MS/MS)-based metabolite profiling. As a result, 27 prototype compounds and 41 metabolites derived from caffeic acid, gallic acid, p -coumaric acid, xanthine, catechin, polymethoxyflavone, (PMF) flavanone, and flavone were identified in rat urine and feces. Based on the detected metabolites, the ingested prototype compounds derived from Ganpu tea were found to undergo extensive phase II metabolism in rats, especially and sulfation. These results will be valuable for interpreting the health effects of Ganpu tea. [ABSTRACT FROM AUTHOR]

Maleic anhydride-grafted carbon fiber (CF- g -MAH) was prepared by a solid-phase grafting method. The rheological behavior, morphology, mechanical properties, and nonisothermal crystallization behavior of pure poly(ethylene terephthalate) (PET) and PET/CF and PET/CF- g -MAH composites were investigated. The rheological analyses and mechanical tests show that the addition of CF or CF- g -MAH increased the complex viscosity and mechanical properties of PET. The morphology observations confirm that the introduction of the MAH group on the surfaces of the CF enhanced the interactions between the CF and PET, resulting in the fine dispersion of CF- g -MAH in the PET matrix. In addition, the analyses of the nonisothermal crystallization behavior of pure PET and the PET/CF and PET/CF- g -MAH composites show that CF or CF- g -MAH can act as a heterogeneous nucleating agent in PET and accelerate its crystallization. Compared to CF, CF- g -MAH is a more effective nucleator for PET. [ABSTRACT FROM AUTHOR]

A conducting copolymer of 1,1′-ferrocenediacyl anilide and aniline (P(FcA-co-ANI)) was synthesized, which had a conjugated structure and ferrocene moieties in the main chain. The monomer and copolymer were characterized using proton nuclear magnetic resonance and Fourier-transform infrared (FTIR) spectroscopies. A P(FcA-co-ANI)/reduced graphene oxide (rGO) composite was synthesized by oxidation polymerization, using rGO as a substrate. The characteristic peaks of P(FcA-co-ANI) and rGO were observed in the FTIR spectrum of P(FcA-co-ANI)/rGO. The X-ray diffraction pattern of P(FcA-co-ANI)/rGO exhibited similar peaks to the pattern of P(FcA-co-ANI), except for the absence of the weak broad peak at 9.0° owing to rGO. The surface morphologies of the materials were characterized by atomic force microscopy, transmission electron microscopy and scanning electron microscopy. The interlayer distances of rGO and P(FcA-co-ANI)/rGO were 0.96 and 1.38 nm, respectively. The morphology of the copolymer was spherical, and it contained island structures covering the surface of the graphene layers. The electrochemical properties of the composite were measured by cyclic voltammetry, galvanostatic charge–discharge measurements and electrochemical impedance spectroscopy. The maximum specific capacitance of the composite was 722.5 F/g at 0.5 A/g. The diffusion resistance was very small, and the composites durability was sufficient for subjecting to prolonged oxidation and reduction. [ABSTRACT FROM AUTHOR]