Search

An environmentally friendly analytical procedure of pre-concentration of cobalt, nickel, and copper according to the rules of green chemistry has been developed. The proposed method is based on using chitosan for sorption of trace elements from water samples. The novel modification of the sorption process is the combination of an ionic liquid (1-butyl-3-methylimidazolium hexafluorophosphate [BMIM][PF6]) with chitosan. Ionic liquid partly decreases the crystallinity of the chitosan. The crystalline regions of the polymer are not accessible to metal ions. Although the ionic liquid cannot completely disrupt the crystalline domains of chitosan, it may gain in the reactive groups of the chitosan, even at the center of the particle. Consequently, the sorption of metal ions by chitosan is significantly improved. In this paper, adsorption characteristics of cobalt, nickel, and copper using newly developed sorption are studied. The effect of pH and time of chitosan activation, as well as sorption, salt concentration, some metals ion concentrations, and the amount of adsorbent on the extent of adsorption, are investigated. Chitosan with adsorbed metal ions was dissolved in acetic acid. After evaporation a solvent film formed and was then analyzed using X-ray fluorescence spectrometry (XRF). As it meets the criterion of thin samples for XRF analysis, the matrix effects can be neglected. With the proposed procedure we obtained detection limits of 7 ng mL−1for cobalt, 5 ng mL−1for nickel, and 4 ng mL−1for copper. [ABSTRACT FROM AUTHOR]

A methodology based on dispersive micro solid-phase extraction (DMSPE) using multiwalled carbon nanotubes (MWCNTs) as solid sorbent prior to measurement with energy-dispersive X-ray fluorescence (EDXRF) spectrometry is proposed. The procedure consists of chelating of nickel, cobalt, copper, and lead ions with ammonium pyrrolidinedithiocarbamate (APDC) and posterior adsorption of metal chelates on MWCNTs (1 mg) dispersed in the aqueous samples (100 mL). DMSPE promotes immediate interaction between the metal chelates and MWCNTs and shortens time of sample preparation in comparison with classical solid-phase extraction. After microextraction process, MWCNTs are collected onto filter and directly measured by EDXRF. With this technique, the direct quantification of metal species held in solid materials is possible and, therefore, the elution step can be avoided. The effects of various experimental parameters such as pH of the solution, amounts of MWCNTs and APDC, sample volume, and time of stirring were investigated. With the best analytical conditions (1 mg of MWCNTs, 2 mg of APDC, 100 mL sample volume, pH = 7, and 5 min time of stirring), Co(II), Ni(II), Cu(II), and Pb(II) can be simultaneously determined with very good recoveries (101%, 98%, 96%, 99%, respectively) and detection limits (0.43, 0.11, 0.46, 0.15 ng mL−1, respectively). The method was applied in determination of trace metal ions in tap water and wastewater samples. [ABSTRACT FROM AUTHOR]