Search

In order to predict the erosion life and erosion failure time of the metal mesh, based on the rotating erosion experiments under different working conditions, the erosion mass loss of the metal mesh under different factors was measured by the weight loss method and the erosion mathematical prediction model was put forward. The erosion wear mechanism of the single-layer metal mesh was explored by using electron microscope scanner and optical microscope. The results show that the erosion rate increases exponentially with the increase of liquid velocity (0.5, 1.0, 1.5, 2.0 m/s). When the solid mass fraction (0.3%, 0.5%, 0.8%) and erosion Angle is 15°–45°, the erosion rate is proportional to the solid mass fraction and erosion Angle. After erosion, the mesh samples suffered different degree of pitting corrosion, ploughing and cutting wear, and the mesh wear was local wear. Compared with the experimental value, the error of the erosion mathematical model is less than 20%, which has a certain reliability, and has an important reference significance for guiding the production control of sand oil Wells. [ABSTRACT FROM AUTHOR]

In this study, a non-stirred Particle Image Velocimetry (PIV) testing device is developed to measure the flow field in a solid–liquid two-phase centrifugal pump. The pump casing and impeller are made of an organic glass material. Two types of impellers are designed considering different structure parameters. The performance curves of the pump are obtained for the different impellers at a rotating speed of 900 rpm with particle concentrations of 0%, 3%, 5%, and 10%. The flow fields for water and a solid–liquid two-phase mixture for the two impellers are measured utilizing the PIV system in a centrifugal rotating frame at the designed condition. The distribution of the particles, together with its influence on the performance of the different impellers, is analyzed. From a comparison of the relative velocity vector fields, the following can be concluded. First, the pump with a double arc-shaped profile demonstrated a more uniform and stable flow field distribution and higher performance than that with a single arc profile. Secondly, the solid particles were distributed mainly at the outlet of the impeller and volute wall, whereas the concentration distribution of the larger particles tended to match the pressure surface. This research can provide theoretical guidance for the design and optimization of two-phase flow centrifugal pumps. [ABSTRACT FROM AUTHOR]