Search

Bi-cruciate retaining total knee arthroplasty has several potential advantages including improved anteroposterior knee stability compared to contemporary posterior cruciate-retaining total knee arthroplasty. However, few studies have explored whether there is significant differences of knee biomechanics following bi-cruciate retaining total knee arthroplasty compared to posterior cruciate-retaining total knee arthroplasty. In the present study, subject-specific lower extremity musculoskeletal multi-body dynamics models for bi-cruciate retaining, bi-cruciate retaining without anterior cruciate ligament, and posterior cruciate-retaining total knee arthroplasty were developed based on the musculoskeletal modeling framework using force-dependent kinematics method and validated against in vivo telemetric data. The experiment data of two subjects who underwent total knee arthroplasty were obtained for the SimTK “Grand Challenge Competition” repository, and integrated into the musculoskeletal model. Five walking gait trials for each subject were used as partial inputs for the model to predict the knee biomechanics for bi-cruciate retaining, bi-cruciate retaining without anterior cruciate ligament, and posterior cruciate-retaining total knee arthroplasty. The results revealed significantly greater range of anterior/posterior tibiofemoral translation, and significantly more posterior tibial location during the early phase of gait and more anterior tibial location during the late phase of gait were found in bi-cruciate retaining total knee arthroplasty without anterior cruciate ligament when compared to the bi-cruciate retaining total knee arthroplasty. No significant differences in tibiofemoral contact forces, rotations, translations, and ligament forces between bi-cruciate retaining and posterior cruciate-retaining total knee arthroplasty during normal walking gait, albeit slight differences in range of tibiofemoral internal/external rotation and anterior/posterior translation were observed. The present study revealed that anterior cruciate ligament retention has a positive effect on restoring normal knee kinematics in bi-cruciate retaining total knee arthroplasty. Preservation of anterior cruciate ligament in total knee arthroplasty and knee implant designs interplay each other and both contribute to restoring normal knee kinematics in different types of total knee arthroplasty. Further evaluation of more demanding activities and subject data from patients with bi-cruciate retaining and posterior cruciate-retaining total knee arthroplasty via musculoskeletal modeling may better highlight the role of the anterior cruciate ligament and its stabilizing influence.

Background: Anterior cruciate ligament (ACL) injury is a military occupational hazard that may be attributed to an individual’s knee biomechanics and joint anatomy. This study sought to determine if greater flexion when landing with load resulted in knee biomechanics thought to decrease ACL injury risk and whether knee biomechanics during landing relate to knee anatomic metrics. Hypothesis: Anatomic metrics regarding the slope and concavity of the tibial plateau will exhibit a significant relation to the increased anterior shear force on the knee and decreased knee flexion posture during landing with body-borne load. Study Design: Descriptive laboratory study. Methods: Twenty male military personnel completed a drop landing task with 3 load conditions: light (~6 kg), medium (15% body weight), and heavy (30% body weight). Participants were divided into groups based on knee flexion exhibited when landing with the heavy load (high- and low-Δflexion). Tibial slopes and depth were measured on weightbearing volumetric images of the knee obtained with a prototype cone beam computed tomography system. Knee biomechanics were submitted to a linear mixed model to evaluate the effect of landing group and load, with the anatomic metrics considered covariates. Results: Load increased peak proximal anterior tibial shear force ( P = .034), knee flexion angle ( P = .024), and moment ( P = .001) during landing. Only the high flexion group increased knee flexion ( P < .001) during weighted landings with medium and heavy loads. The low flexion group used greater knee abduction angle ( P = .030) and peak proximal anterior tibial shear force ( P = .034) when landing with load. Anatomic metrics did not differ between groups, but ratio of medial-to-lateral tibial slope and medial tibial depth predicted peak proximal anterior tibial shear force ( P = .009) and knee flexion ( P = .034) during landing, respectively. Conclusion: Increasing knee flexion is an attainable strategy to mitigate risk of ACL injury, but certain individuals may be predisposed to knee forces and biomechanics that load the ACL during weighted landings. Clinical Relevance: The ability to screen individuals for anatomic metrics that predict knee flexion may identify soldiers and athletes who require additional training to mitigate the risk of lower extremity injury.

Background:Despite success at preventing ankle sprain, prophylactics that restrict ankle plantarflexion motion may produce deleterious knee biomechanics and increase injury risk.Purpose:To determine if ankle prophylactics that restrict plantar- and dorsiflexion motion produce changes in knee biomechanics during a single-leg cut and whether those changes differ between sexes.Study Design:Controlled laboratory study.Methods:A total of 17 male and 17 female participants performed a single-leg cut with 4 conditions: Ankle Roll Guard (ARG), lace-up brace, nonelastic tape, and an unbraced control. Peak stance knee flexion, abduction, and internal rotation joint angle and moment; total knee reaction moment (TKM) and its components (sagittal, frontal, and transverse); and ankle plantarflexion and inversion range of motion (ROM) and peak stance joint moments were tested with a repeated measures analysis of variance to determine the main effect and interaction of condition and sex.Results:Brace and tape restricted plantarflexion ROM as compared with ARG and control (all P < .001). With the brace, women had increased peak knee abduction angle versus ARG ( P = .012) and control ( P = .009), and men had decreased peak knee internal rotation moment as compared with ARG ( P = .032), control ( P = .006), and tape ( P = .003). Although the restrictive tape decreased inversion ROM when compared with ARG ( P = .004) and brace ( P = .017), it did not change knee biomechanics. Neither brace nor tape produced significant changes in TKM or components, yet sagittal TKM increased with ARG versus control ( P = .016). Women exhibited less ankle inversion ROM ( P = .003) and moment ( P = .049) than men, while men exhibited significantly greater frontal TKM ( P = .022) and knee internal rotation moment with the ARG ( P = .029), control ( P = .007), and tape ( P = .016).Conclusion:Prophylactics that restrict ankle plantarflexion motion may elicit knee biomechanical changes during a single-leg cut, but these changes may depend on prophylactic design and user’s sex and may increase women’s injury risk.Clinical Relevance:Sex-specific ankle prophylactic designs may be warranted to reduce knee injury during sports.

Background: It is controversial whether soft tissue fixation only and bone-plug techniques for medial meniscal allograft transplantation provide equivalent fixation and restoration of load distribution. Prior studies on this topic did not re-create the clinical situation with use of size-, side-, and compartment-matched meniscal transplants. Hypothesis: Both techniques will provide equivalent fixation of the meniscal transplant and restore load distribution and contact pressures similar to those of the native knee. Study Design: Controlled laboratory study. Methods: Nine fresh-frozen human cadaveric knees underwent mean contact pressure, mean contact area, and peak contact pressure evaluation in 4 medial meniscal testing conditions (native, total meniscectomy, bone-plug fixation, and soft tissue fixation) at 3 flexion angles (0°, 30°, and 60°) using Tekscan sensors under a 700-N axial load. Results: Medial meniscectomy resulted in significantly decreased contact area and increased contact pressure compared with the native condition at all flexion angles ( P < .0001). Compared with the native state, soft tissue fixation demonstrated significantly higher mean contact pressure and lower mean contact area at 0° and 30° of flexion ( P < .05), while bone-plug fixation showed no significant difference. There was no significant difference in peak contact pressure between study conditions. Conclusion: Total medial meniscectomy leads to significantly worsened load distribution within the knee. Medial meniscal allograft transplantation can restore load parameters close to those of the native condition. The bone-plug technique demonstrated improved tibiofemoral contact pressures compared with soft tissue fixation. Clinical Relevance: Medial meniscal allograft transplantation with bone-plug fixation is a viable option to restore biomechanics in patients with meniscal deficiency.

Background: Multiple anatomic features of the femoral condyles and tibial plateau have been shown to influence knee biomechanics and risk of anterior cruciate ligament (ACL) injury. However, it remains unclear how these anatomic factors affect the midterm outcomes of ACL reconstruction. Hypothesis: Decreased femoral notch width, increased posterior and coronal slopes, and decreased concavity of the tibial plateau are associated with inferior clinical, patient-reported, and osteoarthritis-related outcomes 7 years after ACL reconstruction. Study Design: Cohort study; Level of evidence, 3. Methods: Prospectively collected data from 44 patients who did not have a subsequent graft or contralateral ACL failure within 7 years after unilateral ACL reconstruction were reviewed (mean ± SD age, 23.7 ± 9.2 years; 64% women). Notch width (after notchplasty), posterior slopes of the medial and lateral tibial plateau, maximum depth of the medial tibial plateau, and coronal tibial slope were measured from magnetic resonance images. Anatomic predictors of side-to-side differences in anterior-posterior knee laxity, Knee injury and Osteoarthritis Outcome Score (KOOS), medial joint space width, and side-to-side differences in Osteoarthritis Research Society International (OARSI) x-ray score, measured at 7 years, were identified with linear regression (bivariate) and stepwise regression (multivariate). Results: Increased posterior slope of the lateral tibial plateau was associated with increased side-to-side difference in knee laxity (bivariate model only), increased side-to-side difference in the OARSI score, and decreased KOOS subscores ( R2 > .10, P < .05). Increased posterior slope of the medial tibial plateau was associated with a higher side-to-side difference in the OARSI x-ray score (bivariate model only) and lower KOOS subscores ( R2 > .11, P < .03). Increased coronal tibial slope was associated with lower KOOS subscores ( R2 > .11, P < .03). Decreased medial tibial depth was associated with increased knee laxity as well as decreased KOOS subscores (ie, quality of life and symptoms; R2 > .12, P < .03). Postoperative notch width was not a significant predictor for any surgical outcome. None of the anatomic features were predictive of medial joint space width narrowing. Conclusion: Results partially support the hypothesis and highlight the importance of knee anatomy on several outcomes of ACL reconstruction among patients without subsequent graft or contralateral ACL injures. Increasing slopes in the coronal and sagittal planes with decreasing concavity of the medial tibial plateau lead to less favorable outcomes 7 years after surgery.

Objectives: Meniscal injuries are extremely common. Several anatomical features of the knee, including the tibial plateau morphology, have been shown to influence knee biomechanics and the risk of ligamentous injuries. Little is known, however, how these morphological features influence the risk of isolated meniscal injuries in the ACL intact knee. In the current study, we used MRI and 3D image analysis to investigate anatomical variables of knees in patients with and without isolated meniscus tears. We hypothesized that there are differences in slopes and concavity of the tibial plateau between patients with isolated meniscus tears and matched normal controls. Methods: 65 subjects with first-instance isolated medial or lateral meniscal injuries requiring surgical fixation (Age: 15 +/- 2 years, BMI: 23.2 +/- 3.7 Kg/m2; 43% females) were matched to 65 subjects with normal knees and no prior injuries (Age: 15 +/- 2 years, BMI: 23.1 +/- 3.8 Kg/m2; 43% females) based on age, BMI and sex. Sagittal Proton Density SPACE MR images (preoperative for injured group) were used to measure the posterior slope of the medial (MTS) and lateral (LTS) tibial plateau, coronal slope of the tibial plateau (CTS), and the maximum depth of the medial tibia plateau (MTD, as a measure of medial tibial plateau concavity), following established techniques-Figure 1. Two-sample t-test was used to compare the quantified anatomical features between the cases and matched controls. Results: There were no differences in age (p = 0.999), sex distribution (p = 0.999) and BMI (p = 0.963) between the two cohorts. Compared to matched controls, patients with isolated meniscal tears had lower LTS (3.6 +/- 3.2 vs 5.6 +/- 3.0 degrees; p < 0.001), lower MTS (3.4 +/- 2.9 vs 4.9 +/- 2.5 degrees; p = 0.001) and deeper MTD (2.4 +/- 0.8 vs 1.5 +/- 0.8 mm; p < 0.001). There was no difference in CTS between the groups (3.6 +/- 1.6 vs 3.9 +/- 2.2 degrees; p = 0.300). Conclusion: This study suggests that subjects with isolated meniscus tear have a lower posterior tibial slope and a deeper MTD (more concave medial tibial plateau) than matched population who do not have a meniscus tear. This is contrary to what is known for ACL tears, where a higher posterior tibial slope and a shallower MTD have been associated with an increased risk of ACL tear. During load-bearing activities, in particular high impact movements such as jumping, increased tibial slope and decreased MTD have shown to result in greater anterior shear forces across the knee. In contrast, the less sloped and more concave plateau will experience lower shear forces but more compression, which could be detrimental to the meniscus. This study provides preliminary evidence suggesting a link between tibial plateau morphology and risk of isolated meniscal injuries. Further mechanistic studies are required to better understand the interaction between knee morphology, meniscal loading and subsequent risk of injury. [Figure: see text]

To investigate the biomechanical effect of skeletal knee joint abnormalities, the authors propose to implant pathologically shaped rapid prototyped implants in cadaver knee specimens. This new method was validated by replacing the native trochlea by a replica implant on four cadaver knees with the aid of cadaver-specific guiding instruments. The accuracy of the guiding instruments was assessed by measuring the rotational errors of the cutting planes (on average 3.01° in extension and 1.18° in external/internal rotation). During a squat and open chain simulation, the patella showed small differences in its articulation with the native trochlea and the replica trochlea, which could partially be explained by the rotational errors of the implants. This study concludes that this method is valid to investigate the effect of knee joint abnormalities with a replica implant as a control condition to account for the influence of material properties and rotational errors of the implant. ispartof: Proceedings of the Institution of Mechanical Engineers H, Journal of Engineering in Medicine vol:228 issue:8 pages:833-842 ispartof: location:England status: published

Meniscal root tears, less common than meniscal body tears and frequently unrecognized, are a subset of meniscal injuries that often result in significant knee joint disorders. The meniscus root attachment aids meniscal function by securing the meniscus in place and allowing for optimal shock-absorbing function in the knee. With root tears, meniscal extrusion often occurs, and the transmission of circumferential hoop stresses is impaired. This alters knee biomechanics and kinematics and significantly increases tibiofemoral contact pressure. In recent years, meniscal root tears, which by definition include direct avulsions off the tibial plateau or radial tears adjacent to the root itself, have attracted attention because of concerns that significant meniscal extrusion dramatically inhibits normal meniscal function, leading to a condition biomechanically similar to a total meniscectomy. Recent literature has highlighted the importance of early diagnosis and treatment; fortunately, these processes have been vastly improved by advances in magnetic resonance imaging and arthroscopy. This article presents a review of the clinically relevant anatomic, biomechanical, and functional descriptions of the meniscus root attachments, as well as current strategies for accurate diagnosis and treatment of common injuries to these meniscus root attachments.

Background: Anterior cruciate ligament (ACL) injury is associated with alterations in the central nervous system and resultant sensorimotor control (Courtney et al., 2005; Grooms et al., 2017). Our prospective data indicates that altered knee-motor functional brain connectivity is associated with increased risk for ACL injury (Diekfuss et al., revisions invited), revealing novel neural targets for neuromuscular training interventions. Specifically, interventions that integrate concomitant sensorimotor feedback with injury prevention techniques have the potential to enhance brain functional connectivity to optimize ACL injury risk reduction strategies. To deliver concomitant sensorimotor feedback, we have developed an augmented neuromuscular training (aNMT) system that utilizes interactive, real-time biofeedback to simultaneously target multiple biomechanical variables associated with ACL injury risk (Bonnette et al., in press; Figure 1A). aNMT calculates and maps key biomechanical parameters to an interactive graphical shape that responds in real time as a function of participants’ movements. Participants are instructed to perform exercises to achieve a goal shape, which equates to producing biomechanical parameters associated with ACL injury risk reduction, while deviations toward injury risk factors result in specific shape distortions. We hypothesized that aNMT would significantly improve biomechanics associated with ACL injury risk and also increase knee-motor functional connectivity. We further predicted that the identified connectivity changes would be associated with the hypothesized changes in biomechanics. Methods: Over six weeks of training, participants (n = 25) performed a series of aNMT-based progressive exercises (e.g., squat, overhead squat, squat jump, tuck jump, single-leg Romanian dead lift, pistol squat) and completed a drop vertical jump (DVJ) task while fully instrumented for 3D motion analysis pre- and post-training. Peak knee abduction moment (pKAM; bilateral average) from the DVJ was used as the biomechanical outcome variable. Resting-state functional magnetic resonance imaging (fMRI) scans were also collected pre- and post-training on a subset of the cohort (n = 17). Thirteen additional participants were recruited to serve as untrained controls and completed the DVJ and resting-state fMRI on two testing sessions separated by approximately 6 weeks. Twenty-five knee-motor regions of interest (ROIs) were created based on the areas of brain activation derived from previously published data (Grooms et al., 2015; Kapreli et al., 2007). Paired-samples t tests with a false discovery rate correction for multiple comparisons determined differences in functional connectivity among these 25 ROIs (post > pre). Fisher-transformed Pearson correlation coefficients between the average residual blood oxygen level dependent (BOLD) signal time series extracted from ROIs that demonstrated significant group level changes were associated with pKAM in DVJ task at pre- and post-training. The pre- and post-training Pearson correlation coefficients were subsequently compared using the cocor package (Diedenhofen & Musch, 2015) to determine if the two relationships were significantly different. Results: Results showed that pKAM in the aNMT group was significantly lower following aNMT (p < .05), while no significant changes were found between the two time points for controls (p > .05). Results also revealed significantly greater functional connectivity between the right supplementary motor area (SMA) and the left thalamus at post-training relative to pre-training for the aNMT group, t(16) = 3.37, p = .04 (Figure 1B). No significant differences between the two time points were observed for the controls (all p > .05). The association between pKAM and the right SMA and left thalamus at pre-training (r = -.22; Figure 1C) was significantly different compared to that at post-training (r = .26; Figure 1D), p < .05, with a positive relationship between pKAM and SMA and thalamus activation following aNMT biofeedback. No similar changes in pKAM and right SMA and left thalamus connectivity were observed for the untrained controls, p > .05. Conclusions/Significance: The right SMA is involved in the planning and coordination of movement, and the left thalamus is associated with neuromotor control. The increased functional connectivity between these regions, combined with the reduction in pKAM, which is associated with reduced risk of ACL injury, indicate a possible neural mechanism for improved motor adaption associated with aNMT biofeedback. These findings have distinct implications for ACL injury prevention strategies. Biofeedback tools such as aNMT can be designed to target specifically the neural drivers of aberrant movement biomechanics underlying increased ACL injury risk. [Figure: see text]

Background: Athletes who have undergone anterior cruciate ligament reconstruction (ACLR) have a high risk of reinjury upon the return to sports participation. While the mechanisms behind this increased risk of reinjury are unknown, it has been suggested that altered knee biomechanics during sports-specific activities may be a contributing factor. Purpose/Hypothesis: To compare frontal plane knee joint angles and moments during a sidestep cutting maneuver in female soccer athletes who have undergone ACLR with those in athletes with no history of knee injury. It was hypothesized that athletes with a history of ACLR would exhibit increased knee abduction angles and knee adductor moments compared with those with no history of injury. Study Design: Controlled laboratory study. Methods: Twelve female soccer players with a history of ACLR served as the experimental group, and 12 female soccer players with no history of knee injury constituted the control group. Three-dimensional kinematics and ground-reaction forces were collected while each participant performed a sidestep cutting maneuver. Variables of interest included the knee abduction angle and knee adductor moment during the early deceleration phase of the cutting maneuver. Independent-samples t tests were used to evaluate differences between groups ( P ≤ .05). Results: Participants in the ACLR group exhibited increased average knee abduction angles (ACLR: 3.8° vs control: 1.8°; P = .03) and peak knee adductor moments (ACLR: 1.33 N·m/kg vs control: 0.80 N·m/kg; P = .004) compared with the control group. Conclusion: Female soccer players who have undergone ACLR and returned to sports participation exhibited increased knee abduction angles and knee adductor moments during the early deceleration phase of cutting compared with their healthy counterparts with no history of knee injury. Clinical Relevance: Even though athletes are able to return to sport after ACLR, they are at an increased risk for reinjury. It may be the case that the increased frontal plane knee angles and moments exhibited by these athletes after ACLR could be contributing to this risk for reinjury. Therefore, it is important that rehabilitation programs after ACLR include the restoration of frontal plane knee mechanics.

Context: Injuries to the anterior cruciate ligament (ACL) occur because of excessive loading on the knee. ACL injury prevention programs can influence sagittal plane ACL loading factors and vertical ground reaction force (VGRF). Objective: To determine the influence of ACL injury prevention programs on sagittal plane knee biomechanics (anterior tibial shear force, knee flexion angle/moments) and VGRF. Data Sources: The PubMed database was searched for studies published between January 1988 and June 2008. Reference lists of selected articles were also reviewed. Study Selection: Studies were included that evaluated healthy participants for knee flexion angle, sagittal plane knee kinetics, or VGRF after performing a multisession training program. Two individuals reviewed all articles and determined which articles met the selection criteria. Approximately 4% of the articles fulfilled the selection criteria. Data Extraction: Data were extracted regarding each program’s duration, frequency, exercise type, population, supervision, and testing procedures. Means and variability measures were recorded to calculate effect sizes. One reviewer extracted all data and assessed study quality using PEDro (Physiotherapy Evidence Database). A second reviewer (blinded) verified all information. Results: There is moderate evidence to indicate that knee flexion angle, external knee flexion moment, and VGRF can be successfully modified by an ACL injury prevention program. Programs utilizing multiple exercises (ie, integrated training) appear to produce the most improvement, in comparison to that of single-exercise programs. Knee flexion angle was improved following integrated training (combined balance and strength exercises or combined plyometric and strength exercises). Similarly, external knee flexion moment was improved following integrated training consisting of balance, plyometric, and strength exercises. VGRF was improved when incorporating supervision with instruction and feedback on proper technique. Conclusion: ACL injury prevention programs that are aimed at modifying sagittal plane knee biomechanics and VGRF should use an integrated training approach that incorporates instruction and feedback on proper movement technique.

Background: Lateral meniscal tears are often seen with acute anterior cruciate ligament (ACL) injury and may be left in situ, repaired, or treated with meniscectomy. Clinical studies have shown good outcomes with vertical tears left in situ and poor outcomes following meniscectomy. However, clinically relevant studies are needed to establish a biomechanical foundation for treatment of these tears, particularly regarding the effects of meniscectomy. Purpose: To compare tibiofemoral joint mechanics following vertical lateral meniscal tears and meniscectomies. We hypothesized that a peripheral vertical tear of the lateral meniscus would alter joint mechanics, increasing contact pressure and area, and that more drastic effects would be seen following meniscectomy, at higher knee flexion angles, and with increased loads. Study Design: Controlled laboratory study. Methods: Ten fresh-frozen cadaveric knees (average age, 55 ± 12 years) were tested with 5 lateral meniscus states: intact, short vertical tear, extended vertical tear, posterior horn partial meniscectomy (rim intact), and posterior horn subtotal meniscectomy (rim excised). The specimens were loaded axially at knee flexion angles of 0°, 30°, and 60°, and musculotendinous forces were applied, simulating a 2-legged squat. Intra-articular contact pressures were measured using pressure-sensitive Fuji film. Kinematic data were acquired through digitization of fiducial markers. Results: Vertical tears did not cause a significant change in contact pressure or area. Partial meniscectomy increased maximum contact pressures in the lateral compartment at 30° and 60° from 5.3 MPa to 7.2 MPa and 7.6 MPa, respectively (P = .02, P = .007). Subtotal meniscectomy (8.4 MPa) significantly increased contact pressure compared with partial meniscectomy (7.6 MPa) at 60° (P = .04). Both meniscectomy states significantly increased contact pressures with increasing flexion from 0° to 60° (P < .001, P < .001). Conclusion: Vertical tears of the lateral meniscus during a simulated 2-legged squat did not significantly change contact pressures and areas compared with an intact meniscus. However, treating these tears with partial and complete meniscectomy significantly increased maximum contact pressures. Clinical Relevance: Biomechanical evidence supports treating vertical lateral meniscus tears with meniscal-sparing techniques as opposed to meniscectomy, which may lead to progressive degenerative joint disease from altered joint biomechanics.

Background: Anatomic anterolateral ligament (ALL) reconstruction has been proposed to assist anterior cruciate ligament (ACL) reconstruction in controlling anterolateral rotational laxity of the knee. However, the biomechanical effects have not been reported. Purpose: (1) To investigate the effect of ALL transection on rotational knee kinematics and (2) to determine the effect on knee biomechanics of ALL reconstruction procedures compared with lateral extra-articular tenodesis (LET). Study Design: Controlled laboratory study. Methods: A total of 12 cadaveric knee specimens were tested in the following sequence: (1) ACLintact, (2) anteromedial bundle of ACL sectioned (ACLamb), (3) complete ACL sectioned (ACLfull), (4) ALL sectioned (ALLsec), (5) anatomic ALL reconstruction (ALLanat), and (6) LET. Biomechanical anterior drawer and Lachman tests were performed in which a 90-N load was applied to the posterior tibia, and anterior translation was measured. A combined load to simulate the early phase of the pivot-shift test was executed in which a 5-N·m internal rotation moment was applied to a fully extended knee; anterior translation and internal rotation were measured. Results: Anterior translation increased across conditions for the biomechanical tests. Internal rotation during the simulated early-phase pivot-shift test was significantly different between ACLfull and ALLsec. Anatomic ALL reconstruction did not significantly reduce internal rotation or anterior translation during the simulated early-phase pivot-shift test. After LET, a significant decrease in anterior translation was found. There was no evidence of overconstraint of the knee with either anatomic ALL reconstruction or LET. Conclusion: The ALL demonstrated a role in controlling anterolateral laxity. LET had a composite effect in governing both anterior and rotational laxity. Anatomic ALL reconstruction did not reduce anterolateral rotational laxity. Clinical Relevance: Profiling the biomechanical characteristics of anterolateral reconstruction is integral to understanding the implications and potential benefit of such an additional procedure to ACL reconstruction.

A meniscal prosthesis made of Dacron with polyure thane coating was tested as a substitute for the medial meniscus in a rabbit experimental model concentrating on biomechanical behavior of the knee joint and gross and histologic evaluation 3 months after surgery. The results were compared to sham-operated knees, knees with a peripheral incision of the medial meniscus, and knees with a total meniscectomy. Knees with prosthe sis implantation had the same stiffness as knees with sham-operation or meniscal incision, but knees with meniscectomy were stiffer (P < 0.05). Knees with pros thesis showed lower energy storage during relaxation than knees with sham-operation or meniscal incision (P < 0.05). Energy storage in the prosthesis group was similar to the meniscectomy group. Partial or total ingrowth of synovial tissue into the prosthesis was present in 93%, and 63% of the incised menisci had healed. Cartilage changes were present in 70% of the prosthesis group, in 25% of the knees with meniscal incision, and in all knees with meniscectomy. The sham- operated knees were free from cartilage degeneration. Knees with prosthesis had the same frequency of car tilage changes on the femur, but had less changes on the tibia compared to knees with meniscectomy. A high rate of osteophyte formation was observed after pros thesis implantation as well as following meniscectomy, but the osteophytes were larger in the prosthesis group (P < 0.01). The most frequent and severe effect on the synovium was found in the prosthesis group (92%), but no foreign body reaction or loose Dacron particles were found. The Dacron prosthesis had a cartilage-protecting effect, but the biomechanical behavior of the knee joint was similar to meniscectomy. Knees with peripheral meniscal incision were similar to sham-operated knees.

Background: Lateral meniscal tears are often seen with acute anterior cruciate ligament (ACL) injury and may be left in situ, repaired, or treated with meniscectomy. Clinical studies have shown good outcomes with vertical tears left in situ and poor outcomes following meniscectomy. However, clinically relevant studies are needed to establish a biomechanical foundation for treatment of these tears, particularly regarding the effects of meniscectomy. Purpose: To compare tibiofemoral joint mechanics following vertical lateral meniscal tears and meniscectomies. We hypothesized that a peripheral vertical tear of the lateral meniscus would alter joint mechanics, increasing contact pressure and area, and that more drastic effects would be seen following meniscectomy, at higher knee flexion angles, and with increased loads. Study Design: Controlled laboratory study. Methods: Ten fresh-frozen cadaveric knees (average age, 55 ± 12 years) were tested with 5 lateral meniscus states: intact, short vertical tear, extended vertical tear, posterior horn partial meniscectomy (rim intact), and posterior horn subtotal meniscectomy (rim excised). The specimens were loaded axially at knee flexion angles of 0°, 30°, and 60°, and musculotendinous forces were applied, simulating a 2-legged squat. Intra-articular contact pressures were measured using pressure-sensitive Fuji film. Kinematic data were acquired through digitization of fiducial markers. Results: Vertical tears did not cause a significant change in contact pressure or area. Partial meniscectomy increased maximum contact pressures in the lateral compartment at 30° and 60° from 5.3 MPa to 7.2 MPa and 7.6 MPa, respectively ( P = .02, P = .007). Subtotal meniscectomy (8.4 MPa) significantly increased contact pressure compared with partial meniscectomy (7.6 MPa) at 60° ( P = .04). Both meniscectomy states significantly increased contact pressures with increasing flexion from 0° to 60° ( P < .001, P < .001). Conclusion: Vertical tears of the lateral meniscus during a simulated 2-legged squat did not significantly change contact pressures and areas compared with an intact meniscus. However, treating these tears with partial and complete meniscectomy significantly increased maximum contact pressures. Clinical Relevance: Biomechanical evidence supports treating vertical lateral meniscus tears with meniscal-sparing techniques as opposed to meniscectomy, which may lead to progressive degenerative joint disease from altered joint biomechanics.