Search

Nanofibrous scaffolds have emerged as promising candidates for localized drug delivery systems in the treatment of cutaneous cancers. In this study, we prepared an electrospun nanofibrous scaffold incorporating 5-fluorouracil (5-FU) and etoposide (ETP) for chemotherapy targeting melanoma cutaneous cancer. The scaffold was composed of polyvinyl alcohol (PVA) and chitosan (CS), prepared via the electrospinning process and loaded with the chemotherapeutic agents. We conducted relevant physicochemical characterizations, assessed cytotoxicity, and evaluated apoptosis against melanoma A375 cells. The prepared 5-FU/ETP co-loaded PVA/CS scaffold exhibited nanofibers (NFs) with an average diameter of 321 ± 61 nm, defect-free and homogenous morphology. FTIR spectroscopy confirmed successful incorporation of chemotherapeutics into the scaffold. Additionally, the scaffold demonstrated a hydrophilic surface, proper mechanical strength, high porosity, and efficient liquid absorption capacity. Notably, sustained and controlled drug release was observed from the nanofibrous scaffold. Furthermore, the scaffold significantly increased cytotoxicity (95%) and apoptosis (74%) in A375 melanoma cells. Consequently, the prepared 5-FU/ETP co-loaded PVA/CS nanofibrous scaffold holds promise as a valuable system for localized eradication of cutaneous melanoma tumors and mitigation of adverse drug reactions associated with chemotherapy., Competing Interests: Declaration of conflicting interestsThe author(s) declared no potential conflicts of interest with respect to the research, authorship, and/or publication of this article.

Introduction: During the reconstitution of a drug and during its storage, there are risks of interactions between the drug and the bag used for the preparation. Polyvinyl chloride is a material used in the manufacture of a large part of chemotherapy infusion bags. It is subject to many interactions like sorption of drugs and release of phthalate additives., Material and Methods: Seven anticancer drugs used in pediatric oncology were involved in our study. After reconstitution of the anticancer agents in polyvinyl chloride bags, the adsorption phenomenon between the container and the contents is evaluated by infrared spectroscopy by analyzing the inner surface of the polyvinyl chloride. Subsequently, for the anticancer agents which exhibited an adsorption-container-content, the analysis was carried out by ultraviolet-visible spectrophotometry in order to examine the kinetics of the concentration of reconstituted anticancer drugs., Results: All the polyvinyl chloride bags gave a spectrum identical to the spectrum of the reference bag, except the bags used to reconstitute etoposide whose spectra showed 12 additional peaks. With the absorbances measured by ultraviolet-visible spectrophotometry at different times, the analysis of variance statistical analysis shows that there is a significant difference in absorbances between t 0 and all the other measurement times., Conclusion: This study testifies to the existence of a container-content interaction between etoposide and polyvinyl chloride. Thus, reconstitution of etoposide for intravenous infusion into a polyvinyl chloride bag should be used immediately. For etoposide preparations intended for storage beyond 24 h, it is recommended to use a container other than the polyvinyl chloride bag.

Background: The EPOCH regimen, consisting of vincristine sulfate, doxorubicin hydrochloride, and etoposide phosphate, is typically administered by continuous infusion over four days to oncology inpatients. If the EPOCH regimen was available to be administered through portable elastomeric pumps, chemotherapy could be transitioned to an outpatient setting, reducing inpatient bed days and overall healthcare costs. However, a lack of stability data for the admixtures in the elastomeric infusion devices currently prevents the transition of the regime to an outpatient setting. The purpose of this study is to determine the physical and chemical stability of the admixture in polyisoprene elastomeric pumps under different storage conditions to support the transition of the EPOCH regime to an outpatient setting., Methods: The physico-chemical stability of three admixtures at a range of clinically relevant concentrations compounded in polyisoprene elastomeric infusors was determined when refrigerated at 2-6℃ over a 14-day period followed by 35℃ up to 7 days in the dark, and under standardized fluorescent light to simulate scenarios in clinical practice., Results: All tested admixtures were compatible and the drugs were stable in the elastomeric infusors for up to 14 days when stored at 2-6℃ followed by 7 days at 35℃ in the dark, with nominal losses of <5%. The major degradant of etoposide phosphate was its active form etoposide. There was no degradation (<1% loss) found when the admixture was exposed to a standardized fluorescent light dose of 80 klux-h (25℃) for 10 h. The temperature and light conditions the infusors were exposed to during the stability study were more severe than the conditions determine during clinical administration., Conclusion: The extended stability of the three infusional admixtures compounded in elastomeric infusion pumps demonstrated herein permits advance preparation and storage of these drugs, reducing pharmacy compounding resources. The demonstrated stability at 35℃ and under light exposure, conditions more severe than those experienced during clinical practice, support continuous infusions for up to seven days from the elastomeric infusors without a loss of potency. The proven stability of the EPOCH regimens in the tested elastomeric infusion device supports the transition of treatment to an outpatient setting which will reduce inpatient bed days and overall healthcare costs.

Introduction: The external contamination and cross-contamination by cytotoxic drugs on the surface (outside and septum) of 133 vials from various manufacturers and available on the Swiss market were evaluated. All of the tested vials contained one of the following active ingredients: cyclophosphamide, cytarabine, doxorubicin, epirubicin, etoposide phosphate, gemcitabine, ifosfamide, irinotecan, methotrexate or vincristine., Methods and Materials: The validated wiping liquid chromatography-mass spectrometry method used in this study allowed for the simultaneous determination of these 10 cytotoxic drugs in less than 30 min., Results: External contamination by cytotoxic drugs was detected on 63% of tested vials (outside and septum). The highest contamination level was observed on etoposide phosphate vials with 1896.66 ng of active ingredient on the outside of the vial. Approximately 20% of the contaminated vials had greater than 10 ng of cytotoxic drugs. Chemical contamination on the septum was detected on 38% of the vials. No contamination or very low levels of cytotoxic drugs, less than 1 ng per vial, were detected on the vials protected by plastic shrink-wrap. Traces of cytotoxic drugs different from the active ingredient were detected on 35% of the tested vials., Conclusion: Handling cytotoxic vials with gloves and having a procedure for the decontamination of vials are of the utmost importance for reducing exposure to cytotoxic drugs. Moreover, manufacturers must improve their procedures to provide products free from any contamination.

Etoposide intravenous solution is associated with leaching of diethylhexyl phthalate (DEHP) from bags and tubings made from polyvinyl chloride (PVC). Recent evidence suggests that this may be more substantial than previously found. Since DEHP is potentially hepatotoxic and carcinogenic, it is preferable to prepare and administer etoposide bags and tubings made from non-PVC materials.

The Institut Gustave-Roussy (IGR) Department of Clinical Pharmacy (DCP) ensures the annual preparation of about 30 000 therapeutic batches of anti-neoplastic agents. High performance thin-layer chromatography (HPTLC) allows postproduction quality control of these batches. Although the centralized chemotherapy manufacturing unit has been recently ISO 9001:2000 certified, it was considered to improve the quality level of manufactured batches even further. The viability of micro-organisms (bacteria and fungi) in appropriate sterile media containing various anti-neoplastic agents at therapeutic concentration was assessed to demonstrate the lack of contamination during our manufacturing process in the isolator. After 14 days of incubation in these media, the results show the absence of contamination of the manufactured batches. This leads us to conclude that using sterile drugs and sterile medical devices in a sterile isolator allows the manufacture of sterile therapeutic batches with excellent confidence.