Search

Encasing glass fiber reinforced polymer (GFRP) beam with reinforced concrete (RC) improves stability, prevents buckling of the web, and enhances the fire resistance efficiency. This paper provides experimental and numerical investigations on the flexural performance of RC specimens composite with encased pultruded GFRP I-sections. The effect of using shear studs to improve the composite interaction between the GFRP beam and concrete was explored. Three specimens were tested under three-point loading. The deformations, strains in the GFRP beams, and slippages between the GFRP beams and concrete were recorded. The embedded GFRP beam enhanced the peak loads by 65% and 51% for the composite specimens with and without shear connectors, respectively. Moreover, a non-linear Finite Element (FE) model was developed and validated by the experimental results to conduct a parametric study. The peak loads of the composite specimen without shear studs increased by 14% and 31% and of the composite specimen with shear studs increased by 20% and 32% for the compressive strength of 35 MPa and 45 MPa, respectively.

Externally post-tensioned tendons can cause an initial compressive stress in steel–concrete composite sections at the hogging moment region, and then a part of the tensile stress in the concrete fl...

Strengthening of bridge superstructures composite beams with external post-tensioned tendons is a good technique for strengthening the existing structures. In this study, a numerical model is illustrated to study the nonlinear simulation of composite beams stiffened with externally post-tensioned tendons. The accuracy of the developed numerical model is validated using comparisons between the numerical and existing test data. The influence of various strengthening parameters is investigated, which include draped versus straight tendons, tendon length, the effect of post-tensioning on reinstating the flexural behavior of an overloaded beam, tendon eccentricity, and the degree of shear connection. A good agreement between the proposed model and the test data is obtained. The results demonstrate that at the same tendon eccentricity, the trapezoidal profile shows better behavior for the strengthened beams. However, more ductility is obtained when using the straight tendon profile. Applying post-tensioning through the beam of full length helps to reduce the creation of fatigue cracks, which always start at stress raisers, and subsequently increases the fatigue life of the composite beam. Also, the external post-tensioning effectively maintains the flexural behavior of the overloaded strengthened beam after unloading in comparison to the un-strengthened beam. It is observed that 80% degree of shear connection or higher is recommended to obtain the desired performance of the external post-tensioning force for strengthening composite beams.