Search

Contact stiffness and backlash in the harmonic drive significantly impact a robot's positioning accuracy and vibration characteristics. The height of the harmonic drive tooth pair is typically less than 1 mm, making the measurement and modeling of backlash and contact stiffness inherently complex. This paper proposes a contact stiffness and backlash model by establishing a correlation between fractal parameters and tooth contact load. To obtain the fractal roughness parameters of the real machined tooth surface, a combination of a noncontact optical profiler and the RMS method is employed. Subsequently, the study explores the influence of rough tooth surface and contact force fractal parameters on contact stiffness and gear backlash. The results demonstrate the substantial impact of surface topography parameters and contact force on contact stiffness and backlash. Specifically, an increase in the fractal dimension correlates with a reduction in gear backlash and contact stiffness. Conversely, the fractal roughness parameter exhibits the opposite effect. Notably, an increase in contact force enhances contact stiffness. [ABSTRACT FROM AUTHOR]

Flange connections are widely used in various mechanical components. The most important purpose of tightening for flanged bolts is to achieve designed clamping force for the maintenance of overall performance. In this work, a multi-bolt tightening algorithm is proposed based on elastic interaction coefficient and gasket creep relaxation. Firstly, dispersion of the individual bolt clamping forces for torque control method is considered in the algorithm. Relationship between the nut factors of the flange bolts in multi-pass tightening is established through experiment. Subsequently, the elastic interaction coefficient matrix was updated during the multi-pass tightening process to reduce the error. Two cases, without gasket and silicone gasket, are considered in the multi-bolt tightening experiment. Without gasket, the elastoplastic deformation at the initial stage after tightening will also cause a loss of clamping force. When using gasket, the clamping force loss due to gasket creep relaxation is more pronounced. Through experimental verification, the proposed multi-bolt tightening algorithm are able to achieve the target range of designed clamping forces and reduce its dispersion. Finally, the main influencing factors of the multi-bolt tightening are analyzed to provide a reference for the design of flange connections. [ABSTRACT FROM AUTHOR]

The performance of the milling head is affected by the machining and assembly process of the parts. The key to improving machining accuracy and reliability of swing angle milling head is to establish the precision prediction model. Therefore, a precision prediction model of swing angle milling head under the influence of multiple errors' sources is built. The transmission and accumulation of machining and assembly errors along the assembly sequence path for the transmission system are carried out. All essential components on the assembly sequence path are considered. In addition, the secondary impact of the bearing seat hole is also taken into account. The source of the gear assembly errors is explained. The predicted range of transmission error based on the coupling relationship between assembly errors and transmission error is obtained. A precision experiment is carried out, and the result is within the predicted range. This research demonstrates that the errors' coupling relationship considered in this paper does exist and has an effect on transmission error, which provides a new idea for calculating transmission error of other gear systems. [ABSTRACT FROM AUTHOR]

The two main failure modes of harmonic reducers are wear and contact friction between the tooth profile of the circular spline (CS) and the flexible spline (FS). The sliding speed of the meshing point is a key factor affecting friction and wear processes of the CS and FS and should therefore be accurately determined. Herein, envelope theory is used to deduce the FS trajectory and the envelope track is divided into two segments according to whether or not the meshing point is outside the top circle of the CS. The velocity of the meshing point in the second meshing stage is essentially the vector sum of the FS velocity in three directions. When the CS is fixed, the relative sliding velocity is the instantaneous velocity of the FS along the tangential direction of the enveloped tooth profile. To verify the proposed model, the finite element method (FEM) and laser sensor experiments were performed and a relationship between the angle of rotation of the wave generator (WG) and the velocity of the FS was established. The results show that the sliding speed is sensitive to the radial displacement coefficient and has a linear relationship with the rotational speed of the WG. [ABSTRACT FROM AUTHOR]

Ball screw mechanisms (BSMs) are used as accuracy transmission components in a wide range of industries and are characterized by their high accuracy. More specifically, the positioning accuracy of BSM has a significant effect on the accuracy of machine tool. Based on the macro-micro multiscale method, an exponential prediction model for the BSM positioning accuracy was developed considering time-varying working conditions (load and rotational speed) and feed modes. Since the accuracy degradation is mainly caused by wear, a microscopic approach was proposed to describe the positioning accuracy retention and the microscopic wear process was investigated. The sliding contact of the asperities between the ball and raceway was analyzed, and the microscopic wear behavior of the asperities was determined. Considering the time-varying working conditions, the BSM positioning accuracy characteristics were obtained under the normal feed mode by conducting suitable tests. The exponential wear model used the wear index to describe the wear status based on the positioning accuracy measurement. The accuracy loss value and the prediction index of positioning accuracy were determined based on an exponential model, and the effective lifetime of the BSM was predicted. Finally, the exponential prediction model was used in negative/positive skew feed distribution, and the effective lifetime determined. [ABSTRACT FROM AUTHOR]

The motion accuracy of hydrostatic turntable is the key in improving the machining accuracy of heavy-duty machine tool. However, the motion accuracy of hydrostatic turntable depends not only on the offset load but also on the rotating speed of the turntable as well as the profile errors of the guide rails. In this paper, a simulation model is developed to analyze the effect of guide rail profile errors on the motion accuracy of hydrostatic turntable. The reaction forces of preload thrust bearing and hydrostatic circular oil pads are obtained based on the Reynolds equation of the lubricant film. The motion equations of hydrostatic turntable are derived in which the profile errors of two guide rails are considered. The results show that the motion accuracy of hydrostatic turntable can be affected by wavelength, amplitude of profile errors and speed, and offset load of turntable. Finally, the motion accuracy of heavy-duty hydrostatic turntable used in XCKA28105 type turning and milling composite machine tool is obtained by using the presented method. Comparing with the experimental results, the proposed model can be used to predict the machining accuracy caused by the profile errors of guide rails for any heavy-duty hydrostatic turntable. [ABSTRACT FROM AUTHOR]