Search

The present paper aims to find out the influence of operating head on the rotating bucket free surface sheet flow and hydrodynamics performance for a Pelton turbine. Three-dimensional unsteady air-water two-phase flow simulations in the rotating buckets were performed by adopting the shear stress transport curvature correction turbulence model and homogenous model. The sensitivities of the unsteady simulation results to moving mesh resolution and computational fluid dynamics solver time-step have been evaluated to discuss the effect of Courant–Friedrichs–Lewy conditions on the two-phase flow simulation. The accuracy of the numerical predicted flow pattern and the hydrodynamic performance results are reasonable when compared with the experimental data. The simulation results indicate that the remaining kinetic energy carried by the outflow under the nondesigned water head is the main reason for the efficiency loss in the Pelton turbine. Under low water head conditions, jet distortion caused by the Coanda effect and flow interference will lead to more severe efficiency deterioration. [ABSTRACT FROM AUTHOR]

During the runaway process of a Pelton turbine, the runner bears huge amounts of water pressure pulsations and centrifugal forces, which is different from the steady-state condition. In this work, a fine 3D CFD simulation of the runaway process of a Pelton turbine is performed. Both the macro-parameter changing patterns of rotational speed, torque and efficiency, and the micro-flow features of pressure pulsations and flow patterns are intensively studied and analyzed. It is found that the maximum runaway speed is 1.78 times of the rated speed, acceleration is the main feature in the early stage of runaway, and the jet fragment breaks away and strikes once again on the lip region and backside of the buckets in the middle and late stages. The multiple strikes make the frequency of pressure pulsations increase, and the cavitation occurs on the backside mold line. This successful 3D simulation shows that it is possible to simulate other transient processes of Pelton turbines and conduct fluid–structure interaction analysis of the runner. [ABSTRACT FROM AUTHOR]

Unlike the reaction turbines, the hydraulic performance of Pelton turbines varies due to the unsteady flow of the rotating buckets in time and space. This study experimentally and numerically investigates the dynamic performance of a Pelton turbine at five different operating conditions. The unsteady numerical simulations were performed with the SST turbulence model. The three-dimensional unsteady free surface sheet flow behavior in the rotating buckets was modeled by the two-phase homogeneous model. The model was used to analyze the dynamic flow patterns and the torque variations as the buckets rotated. The predicted hydraulic performance at different unit discharge rates are compared with the field test while the free surface flow patterns are compared with previous experimental and numerical results. The predicted relative efficiency agrees well with the field test results. The calculations were used to clarify the hydraulic mechanisms with unsteady free surface sheet flow in the rotating bucket. [ABSTRACT FROM PUBLISHER]

The increasing share of hydropower in world electricity production requires the development of standardized and optimized design procedures leading to increasingly higher efficiency values.To date, despite a certain amount of support from computational fluid dynamics, Pelton turbines are still characterized by semiempirical design criteria that do not make it possible to optimize the jet–bucket interaction in order to maximize turbine performance. Based on an analysis of particle flow tracks, this paper presents a hybrid Eulerian–Lagrangian method to investigate the influence of bucket geometry on the Pelton efficiency at two different operating conditions. Jet–bucket interaction was numerically analyzed by means of a traditional mesh-based numerical approach, using a transient multi-phase homogeneous model. Subsequently, the numerical results were integrated using a predictor–corrector algorithm, combining a fourth order Adams-Bashforth method as predictor and a fourth order Adams-Moulton method as corrector, in order to determine the fluid particle trajectories on the rotating buckets. The particle flow tracks were analyzed in detail to evaluate the single-particle performance in terms of discharged kinetic energy, momentum variation, and total energy variation during the jet–bucket interaction. Moreover, on the basis of the particle discharging position, the contribution of the different bucket areas to the total torque of the turbine was investigated to determine the time-depending influence of the bucket geometry on the turbine energy exchange and to suggest possible design solutions for improving bucket performance. [ABSTRACT FROM PUBLISHER]