Search

A fatigue–oxidation–creep damage model that can take into account the effect of multiaxial cyclic feature on the damage mechanism is proposed under axial-torsional thermo-mechanical fatigue loading. In the proposed model, the effects of non-proportional additional hardening on fatigue, oxidation, and creep damages are considered, and the variation of oxidation damage under different high temperature loading conditions is also described. Moreover, the intergranular creep damage needs to be equivalent to the transgranular damage before accumulating with the fatigue and oxidation damages. The fatigue, oxidation, and creep damages can be expressed as the fractions of fatigue life, critical crack length, and creep rupture time, respectively, which allows the linear accumulation of different types of damages on the basis of life fraction rule. In addition, the proposed model is validated by various fatigue experimental results, including uniaxial thermo-mechanical fatigue, axial-torsional thermo-mechanical fatigue, and isothermal axial-torsional fatigue under proportional and non-proportional loadings. The results showed that the errors are within a factor of 2. [ABSTRACT FROM AUTHOR]

The multiaxial thermomechanical fatigue properties for nickel-based superalloy GH4169 in aeroengine turbine discs are investigated in this paper. Four types of axial–torsional thermomechanical fatigue experiments were performed to identify the cyclic deformation behavior and the damage mechanism. The experimental results showed that the creep damage can be generated under thermally in-phase loading while it can be ignored under thermally out-of-phase loading, and the responded stress increasing phenomenon, that is, non-proportional hardening, can be shown under the mechanically out-of-phase strain loading. Based on the analysis of cyclic deformation behavior and damage mechanism, a life prediction method was proposed for multiaxial thermomechanical fatigue, in which the pure fatigue damage, the creep damage, and the interaction between them were simultaneously considered. The pure fatigue damage can be calculated by the isothermal fatigue parameters corresponding to the temperature without creep; the creep damage can be calculated by the principle of subdivision, and the creep–fatigue interaction can be determined by creep damage, fatigue damage, and an interaction coefficient which is used to reflect the creep–fatigue interaction strength. The predicted results showed that the proposed method is reasonable. [ABSTRACT FROM AUTHOR]

Based on the isothermal fatigue and creep damage, a life prediction approach under multiaxial thermo-mechanical loading was proposed in this investigation. In the proposed method, the multiaxial thermo-mechanical fatigue damage during one cycle period was divided into the isothermal fatigue damage and the creep damage. In order to evaluate conservatively, the isothermal fatigue damage during one cycle period was calculated by using multiaxial fatigue damage model at the maximum temperature during the whole period, and the creep damage during one cycle period was calculated by accumulating the creep damage of all portions originated from the divided time history for the axial load component and temperature history. The life prediction results by the proposed model showed a good agreement with experimental data for nickel-base alloy GH4169 and cobalt-base Haynes188 under axial-torsional thermo-mechanical loading. [ABSTRACT FROM AUTHOR]