Search

Lead sulfide (PbS) quantum dots (QDs) are promising materials in solution-processed photovoltaic (PV) devices due to their tunable bandgap and low-cost processing. Replacing the long oleic acid ligands of the as-synthesized QDs with shorter ligands is a key step for making functional QD PVs with correctly tuned band energies and reduced non-radiative recombination centers. In this work, we study the effect of ultraviolet (UV) treatment of PbS QD layers on the QD surface states during ligand exchange. We demonstrate that this straightforward approach effectively reduces the surface trap states and passivates the surface of QDs. We find that UV treatment reduces the density of hydroxyl groups attached to the QD surface and improves the bonding of short ligands to the QD surface. Multiple analyses show the reduction of nonradiative recombination centers for the UV-treated sample. The power conversion efficiency (PCE) of our optimized PbS QD device reached 10.7% (vs. 9% for the control device) and was maintained above 10% after 230 h of constant illumination.

In this work, a novel and facile synthesis process to fabricate single crystalline organometal halide perovskite nanowires has been successfully developed. Nanowires were grown in a high density ordered array from metal nanoclusters inside anodic aluminum oxide templates using a non-catalytic chemical vapor deposition method. Specifically, perovskite NWs were grown as a result of the reaction between methylammonium iodide (MAI) and the Pb/Sn (Pb or Sn) metal in anodic aluminum oxide templates under optimal conditions. The characterization results show that there is a reaction zone at the interface between the perovskite material and metal, at the bottom of the anodic aluminum oxide nanochannels. In order to sustain perovskite NW growth, MAI molecules have to diffuse downward through the perovskite NWs to reach the reaction zone. In fact, the reaction is facilitated by the formation of an intermediate product of the metal iodide compound. This suggests that the Pb/Sn metal is converted to PbI 2 /SnI 2 first and then perovskite NWs are formed as a result of the reaction between MAI and PbI 2 /SnI 2 through a vapor-solid-solid process. The optical characterization results demonstrate that the as-synthesized NWs with an ultra-high nanostructure density can serve as ideal candidates for optoelectronic devices, such as solar cells, light-emitting didoes, photodetectors, etc. And the reported growth approach here is highly versatile combining the merits of excellent controllability, cost-effectiveness and tunability on material composition and physical properties.

Utilization of nanostructures on photovoltaic devices can significantly improve the device energy conversion efficiency by enhancing the device light harvesting capability as well as carrier collection efficiency. However, improvements in device mechanical robustness and reliability, particularly for flexible devices, have rarely been reported with in-depth understanding. In this work, we fabricated efficient, flexible and mechanically robust organometallic perovskite solar cells on plastic substrates with inverted nanocone (i-cone) structures. Compared with the reference cell that was fabricated on a flat substrate, it was shown that the device power conversion efficiency could be improved by 37%, and reached up to 11.29% on i-cone substrates. More interestingly, it was discovered that the performance of an i-cone device remained more than 90% of the initial value even after 200 mechanical bending cycles, which is remarkably better than for the flat reference device, which degraded down to only 60% in the same test. Our experiments, coupled with mechanical simulation, demonstrated that a nanostructured template can greatly help in relaxing stress and strain upon device bending, which suppresses crack nucleation in different layers of a perovskite solar cell. This essentially leads to much improved device reliability and robustness and will have significant impact on practical applications.