Search

Enhanced dielectric constant and high breakdown strength offers immense promise for excellent energy storage performance, which is of critical significance in modern electronics and power systems. However, polymer nanocomposites with traditional routes have to balance between dielectric constant and breakdown strength, hence hindering substantive increases in energy density. Herein, a sandwiched polymer nanocomposite film has been constructed to take full advantage of the individual component layers. BaTiO 3 nanoparticles are coated with a fluoropolymer to form core-shell structures and then introduced into a polymer as the top and the bottom layers of a sandwich film for enhancing polarization. Moreover, boron nitride nanosheets (BNNSs) in the middle layer of the sandwich film exert positive effects on the inhibition of current leakage for high breakdown resistance. The breakdown strength increases from 480 MV m -1 of the neat polymer to 580 MV m -1 of the sandwiched film. Additionally, the film exhibits a higher dielectric constant in comparison with the neat polymer. The sandwiched film displays a superior energy density (15.75 J cm -3 ), which is about 1.9 times that of the neat polymer. This work proposes a feasible route to achieve excellent energy storage of polymer dielectrics by synergistically introducing insulating fillers and additional dipoles in a sandwiched polymer nanocomposite film.

Improved dielectric constant and breakdown strength facilitates excellent energy storage density of polymer dielectrics, which is positive to miniaturize dielectric capacitors in electronic and electrical systems. Although coating polar substances on nanoparticles enhances the dielectric constants of polymer nanocomposites, it usually causes local electric field concentration, leading to poor breakdown strength. Here, fluoropolymers with tailorable fluorine content (PF0, PF30 and PF60) are coated on BaTiO 3 (BT) nanoparticles to construct typical core-shell structures that are further blended with poly(vinylidenefluoride- co -hexafluoropropylene) (P(VDF-HFP)) to obtain BT@PF/P(VDF-HFP) nanocomposites. Uniform dispersion of nanoparticles and excellent compatibility of interfaces are observed for the samples. In addition, the dielectric constant gradually increases from 8.03 to 8.26 to 9.12 for the nanocomposites filled with 3 wt% BT@PF0, BT@PF30 and BT@PF60, respectively. However, 3 wt% BT@PF30/P(VDF-HFP) has the highest breakdown strength (455 kV mm -1 ) among the nanocomposites, which is as good as neat P(VDF-HFP). More importantly, BT@PF30 rather than BT@PF60 possesses the maximum discharged energy density (11.56 J cm -3 at 485 kV mm -1 ), which is about 1.65 times that of neat P(VDF-HFP). This work proposes a facile experimental route to optimize the dielectric constants of the shell layer to couple the dielectric constants between the nanoparticles, shell layer and polymer matrix, which contributes to alleviating the local electric field concentration for excellent breakdown strength and electrical energy storage of polymer nanocomposites.

Nucleosides have been found to suffer in-source fragmentation (ISF) in electrospray ionization mass spectrometry, which leads to reduced sensitivity and ambiguous identification. In this work, a combination of theoretical calculations and nuclear magnetic resonance analysis revealed the key role of protonation at N3 near the glycosidic bond during ISF. Therefore, an ultrasensitive liquid chromatography-tandem mass spectrometry system for 5-formylcytosine detection was developed with 300 fold signal enhancement. Also, we established a MS1-only platform for nucleoside profiling and successfully identified sixteen nucleosides in the total RNA of MCF-7 cells. Taking ISF into account, we can realize analysis with higher sensitivity and less ambiguity, not only for nucleosides, but for other molecules with similar protonation and fragmentation behaviors.

A copper-catalyzed decarbonylative alkylation-cyanation of styrene derivatives with aliphatic aldehydes and trimethylsilyl cyanide to provide chain elongated nitriles is reported. Using TBHP as an oxidant and free radical initiator, the reaction can smoothly convert abundant α-di-substituted, α-mono-substituted and linear aliphatic aldehydes into the corresponding 3°, 2° and 1° alkyl radicals to initiate the subsequent radical-type difunctionalization of various styrenes.

Integrating high-loading dielectric nanoparticles into polar polymer matrices potentially can profit the intrinsic polarization of each phase and allow for greatly enhanced dielectric properties in polymer nanocomposites. It is however challenging to achieve desirable highly filled polar polymer composites because of the lack of efficient approaches to disperse nanoparticles and maintain interfacial compatibility. Here, we report a versatile route to fabricate highly filled barium titanate/fluorinated silicone rubber (BT/FSR) nanocomposites by "thiol-ene click" and isostatic pressing techniques. The loaded BT nanoparticles (from 82 wt% to 90 wt%) are chemically bonded with FSR in the nanocomposites. The existence of the polar group (-CH 2 CF 3 ) of the polymer matrix does not affect the uniform dispersion of the nanoparticles or the good interfacial compatibility. The 90 wt% BT/FSR nanocomposite shows the highest dielectric constant of 57.8 at 10 3 Hz, while the loss tangent can be kept below 0.03. Besides, BT/FSR nanocomposites display higher breakdown strength than BT/SR nanocomposites. This work offers a facile strategy towards superior dielectric properties of polymer nanocomposites.

The tendon-to-bone healing after trauma is usually slow and weak, and the repair site is easily disrupted during early mobilization exercise. bFGF and VEGFA gene therapy may hold promise in augmenting the tendon-to-bone healing process through enhancing cell proliferation and angiogenesis. This study is conducted to determine the effects of nanoparticle-mediated co-delivery of bFGF and VEGFA genes to the tendon-to-bone repair interface on the healing strength and biological responses in a chicken model. The PLGA nanoparticle/pEGFP-bFGF + pEGFP-VEGFA plasmid complexes were prepared and were characterized in vitro and in vivo. The nanoparticle/plasmid complexes can effectively transfer bFGF and VEGFA genes to the tendon-to-bone interface. Nanoparticle-mediated co-delivery of bFGF and VEGFA genes significantly improved the tendon-to-bone healing in terms of healing strengths and histology in a chicken flexor tendon repair model. Our results suggest a new biological approach to accelerate the tendon-to-bone healing.

Snake venom is a complex mixture mainly consisting of proteins and peptides which varies with different species. These variations lead to different toxic mechanisms and different anti-venom serums for treatment and the determination of their use as drugs. Hence, it is important to develop a sensitive and reliable method to identify the species of snakes from venoms. Herein, we present a novel strategy based on the sheathless capillary electrophoresis-electrospray ionization-mass spectrometry (CESI-MS) system to characterize snake venom proteins. Through the determination of peptides, we found the characteristic peptides of 8 different snakes with high sensitivity (1 μg mL -1 ) and high selectivity, which provided a reliable method for the species identification and purity detection of snake venom samples.

Here, we demonstrate use of a Mg 2+ -dependent, site-specific DNA enzyme (DNAzyme) to cleave oligos from polyacrylamide gel beads, which is suitable for use in drop-based assays. We show that cleavage efficiency is improved by use of a tandem-repeat cleavage site. We further demonstrate that DNAzyme-released oligos function as primers in reverse transcription of cell-released mRNA.

A reusable magnetic-quantum dot material (MNP-SiO 2 -QD) with good magnetic properties and high fluorescence retention was successfully fabricated from linked magnetic nanoparticles and quantum dots. The resulting material can qualitatively and quantitatively detect four kinds of antibiotics and maintain high recovery rates., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

Single nucleotide polymorphisms (SNPs) have been proven to be important biomarkers for disease diagnosis, prognosis and disease pathogenesis. Here, taking the advantages of a self-assembled oligonucleotide sandwich structure and robust chemical reactions, we have developed a simple, high-throughput and effective colorimetric analytical technique termed CuAAC-based ligation-assisted assays (CuAAC-LA) for SNP detection using a DNA-BIND 96-well plate. With the 5'-azide and 3'-alkyne groups labelled on two oligonucleotide probes, the target DNA can direct a Cu(i)-catalyzed alkyne-azide cycloaddition (CuAAC) click reaction. Since the small difference in duplex stability caused by a single-nucleotide mismatch was amplified by the steric effects of these reactive groups for the ligation reaction of an unstable duplex, CuAAC-LA exhibited an ultra-sensitive discrimination ability for a mutant type target in the presence of large amounts of wild type targets. As low as 0.05% SNP could be clearly detected, which was better than most previously reported methods by various DNA ligases, indicating that a simple and rapid synthetic method i.e., the DNA template-directed click reaction held the potential to replace the ligase for SNP detection.

We demonstrate an approach using a plasmon-accelerated electrochemical reaction to improve the performance of scanning electrochemical microscopy.

DNA cytosine modifications are important epigenetic modifications in gene regulation and pathogenesis. DNA hydrolysis followed by HPLC-MS/MS is the gold standard in DNA modification quantification. In particular, it is the only sensitive and accurate method for low abundance modifications, such as 5-carboxylcytosine (5caC). Here, we report the discovery of the nuclease resistance property of 5caC to snake venom phosphodiesterase I (PDE1), a 3' to 5' exonuclease commonly used in several DNA hydrolysis protocols. We conducted a systematic evaluation of six commonly used hydrolysis protocols and found that all protocols that use PDE1 underestimate the level of 5caC. Finally, we identified the best method for cytosine modification quantification of biological samples, which leads to an over 10-fold higher amount of 5caC being detected compared with other methods. Our results highlight that caution should be taken when choosing a DNA hydrolysis protocol to quantify certain DNA modifications., Competing Interests: There are no conflicts to declare., (This journal is © The Royal Society of Chemistry.)

A label-free ultrasensitive determination of eight RNA modified nucleotides simultaneously was first established based on a sheathless capillary electrophoresis-tandem mass spectrometry system. This system performed well using only 500 pg-5 ng practical RNA samples, and a downward trend of most target nucleotides in HCT 116 cells was observed with the increase of nickel concentration.

Here, we describe a simple mix-and-read method for the detection of specific bacterial strains that uses a DNAzyme and a molecular beacon to generate a signal. We have greatly improved upon the previously described DNAzyme-based bacteria detection method by eliminating a tedious preparation step while maintaining detection sensitivity.

5-Methylcytosine (5mC) and 5-hydroxymethylcytosine (5hmC), two of the best-studied DNA modifications, play crucial roles in normal development and disease in mammals. Although 5-methylcytidine (m5C) and 5-hydroxymethylcytidine (hm5C) have also been identified in RNA, their distribution and biological function in RNA remain largely unexplored, due to the lack of suitable sequencing methods. Here, we report a base-resolution sequencing method for hm5C in RNA. We applied the selective oxidation of hm5C to trihydroxylated-thymine (thT) mediated by peroxotungstate. thT was subsequently converted to T during cDNA synthesis using a thermostable group II intron reverse transcriptase (TGIRT). Base-resolution analysis of the hm5C sites in RNA was performed using Sanger sequencing. Furthermore, in combination with the TET enzyme oxidation of m5C to hm5C in RNA, we expand the use of peroxotungstate oxidation to detect m5C in RNA at base-resolution. By using this method, we confirmed three known m5C sites in human tRNA, demonstrating the applicability of our method in analyzing real RNA samples.

Single nucleotide polymorphisms (SNPs) are emerging as important biomarkers for disease diagnosis, prognostics and disease pathogenesis. As one type of disease is always connected to several SNP sites, there is great demand for a reliable multiple SNP detection method. Herein, we mimicked a ligation reaction based on DNA ligase and originally utilized an enzyme-free DNA template-directed click reaction for SNP detection. With 5'-alkyne and 3'-azide groups labelled on two oligonucleotide probes, the target DNA-directed Cu(i)-catalyzed alkyne-azide cycloaddition (CuAAC) click reaction produced a new DNA strand with a triazole backbone, as a mimic of a DNA phosphodiester linkage. Trace amounts of the target (as low as 25 fmol in 50 μL) could be sensitively detected using capillary gel electrophoresis with laser-induced fluorescence (CGE-LIF). Meanwhile, SNP caused an obvious difference in the efficiency of the click reaction, and 0.5% SNP could be easily detected. More importantly, multiplexed SNP detection in a one tube reaction was successfully achieved only by encoding different lengths of the DNA probes for the different SNP sites.

The enrichment of glycopeptides plays an important role in glycoproteomics. In this paper, a covalent-organic framework called TpPa-1, synthesized by the Schiff base reaction of 1,3,5-triformylphloroglucinol and paraphenylenediamine, was first successfully utilized as a hydrophilic porous material for N-linked glycopeptide enrichment. Using this material, interference from non-glycopeptides could be efficiently eliminated, which facilitated the mass spectrometry detection of glycopeptides. By capturing N-linked glycopeptides from tryptic digests of human IgG, our method was proved to have high sensitivity at the femtomole level. And it showed superior selectivity for glycopeptides even when non-glycopeptides were 1000 times more concentrated. Due to the strong covalent bonds, this material possessed good stability and could be repeatedly used for at least 10 times. The ultra-low mass density and abundant binding sites also provided it with high binding capacity (178 mg g -1 , IgG/TpPa-1). Moreover, N-linked glycopeptides were easily enriched by this material from only 10 μL human serum, which demonstrated its potential in pretreatment of complex biological samples.

G-quadruplex sequences exist in eukaryotic organisms and prokaryotes, and the investigation of the interactions between G-quadruplexes and small molecule ligands is important for gene therapy, biosensor fabrication, fluorescence imaging and so on. Here, we investigated the behaviour of methylene blue (MB), an electroactive molecule, in the presence of different intramolecular G-quadruplexes by an electrochemical method using a miniaturized electrochemical device based on its intrinsic electrochemical properties. Although the effects of MB on different intramolecular G-quadruplex structures are not obvious by circular dichroism spectroscopy, distinct differences in the binding affinities of MB with different intramolecular G-quadruplexes were quickly and easily observed by an electrochemical technique. At the same time, for the human telomerase G-rich sequence (HT), the diffusion current of MB changed sensitively under different ionic conditions due to the formation of different conformations of HT, which indicated that our electrochemical method has the potential to study the influence of metal ions on the conformations of the G-quadruplexes with simplicity, rapid response and low cost. From all these, a new stacking mechanism and rule were obtained, which were also validated by docking studies and isothermal titration calorimetry (ITC).

Phytochemicals are essential secondary plant metabolites which play important roles in the areas of plant biochemistry, pharmacy and medical science because of their significant bioactivities. Conventional analysis of phytochemicals in plants needs a complex combination of different extraction and separation steps. Here a simple and universal method for profiling phytochemicals in a single plant cell was demonstrated based on high performance liquid chromatography-mass spectrometry. Single purple and colorless cell samples (about 15 μm in size) found in the outer layer of a young stem of Forsythia suspensa, just inside the cuticles were collected and transferred by glass micropipettes from cell monolayers. At least 30 peaks were separated and detected, and 24 of these peaks were identified. Apart from several common plant metabolites in high abundance, like polysaccharides and amino acids, 9 phytochemicals that have special bioactivities in this plant and in medical treatment were successfully detected. Phytochemical differences between these two kinds of cells were also distinguished which was applied to investigate the heterogeneity of cells from different parts of plants and the dependency of important plant bioprocesses on phytochemical changes.

Based on click chemistry and DNAzyme, we constructed for the first time a cupric ion triggered DNA diode using a tandem linkage-cleavage process, which could occur in order in a programmable and autonomous manner. This DNA diode is a new DNA functional element and can precisely control the translation direction of information.

A newly developed sheathless interface for capillary electrophoresis-mass spectrometry, using a porous tip sprayer, was first applied for highly sensitive determination of cytosine modifications. The system performed well in identification and quantification of both 5-methylcytosine and 5-hydroxymethylcytosine using only 125 pg (∼20 cells) genomic DNA samples.

Taking advantage of the intrinsic characteristics of G-triplet-containing sequences, a pioneering tailor-made clip-like reporter containing three-fourths of a G-quadruplex is established. The reporter can clip the G triplet in the target sequence through a recognition process to form a complete G-quadruplex structure.

The research on metal-organic frameworks (MOFs) has been developing at an extraordinary pace in its two decades of existence, as judged by the exponential growth of novel structures and the constant expansion of its applicability and research scope. A major part of the research and its success are due to the vital role of the concept of mixed organic ligands in the design, tuning and functions. This perspective, therefore, reviews the recent advances in MOFs based on this concept, which is generally based on employing a small polydentate ligand (here labelled as "nodal ligand") to form either clusters, rods or layers, which are then connected by a second ditopic linker ligand to form the framework. The structures of the materials can be grouped into the following three categories: layer-spacer (usually known as pillared-layer), rod-spacer, and cluster-spacer based MOFs. Depending on the size and geometry of the spacer ligands, interpenetrations of frameworks are occasionally found. These MOFs show a wide range of properties such as (a) crystal-to-crystal transformations upon solvent modifications, post-synthetic metal exchange or ligand reactions, (b) gas sorption, solvent selectivity and purification, (c) specific catalysis, (d) optical properties including colour change, luminescence, non-linear optic, (e) short- and long range magnetic ordering, metamagnetism and reversible ground-state modifications and (f) drug and iodine carriers with controlled release. In the following, we will highlight the importance of the above concept in the design, tuning, and functions of a selection of existing MOFs having mixed organic ligands and their associated structures and properties. The results obtained so far using this concept look very promising for fine-tuning the pore size and shape for selective adsorption and specificity in catalytic reactions, which appears to be one way to propel the advances in the application and commercialization of MOFs.

The construction of compact and robust artificial biochemical circuits based on nucleic acids can help researchers to understand the essential mechanisms of complex biological systems, and design sophisticated strategies for various requirements. In this study, a novel DNA cross-triggered cascading self-amplification artificial biochemical circuit was developed. Once triggered by trace amounts (as low as 2 amol) of either of two fully independent oligonucleotide factors under homogeneous isothermal conditions, the circuit simultaneously amplified both factors by 10 5 -10 7 fold, which was proved using mass spectrometry. The compact and robust circuit was successfully used to construct a multi-input Boolean logic operation and a sensitive DNA biosensor based on the dual-amplification of both the target and reporter. The circuit showed great potential for signal gain in complicated molecular programming, and flexible control of nucleic acid nanomachines in biochemical network systems and nanotechnology.

Research on the kinetic characteristics and mechanisms of DNA reactions is crucial for bioengineering and biosensing. A G-quadruplex, which can form a peroxidase-mimicking DNAzyme with hemin, was for the first time used to establish a versatile platform for kinetic investigations on DNA reactions. G-quadruplex sequence EAD2 was incorporated into the corresponding nucleic acid reaction as product. The kinetic curves can be obtained rapidly and simply via the quantification of created DNAzyme. In this paper, the kinetics of isothermal linear strand displacement amplification reactions with different DNA lengths and isothermal exponential amplification reactions were successfully elucidated via the G-quadruplex based monitoring platform. As a safe and accessible alternative to the traditional methods, this robust, label-free, time-saving and high-throughput platform shows great potential for the exploration of more novel DNA reactions or circuits in an ingenious manner.

A facilely synthesized amino-functionalized metal-organic framework (MOF) MIL-101(Cr)-NH2 was first applied for highly specific glycopeptide enrichment based on the hydrophilic interactions. With the special characteristics of the MOF, the material performed well in selectivity and sensitivity for both standard glycoprotein samples and complex biological samples.

A novel format of fluorescence immunosorbent assay based on the hybridization chain reaction (HCR) using a DNA intercalating dye for signal readout was constructed for the sensitive detection of targets, both in competitive and sandwich modes. In this platform, the capture and recognition processes are based on immunoreactions and the signal amplification depends on the enzyme-free, isothermal HCR-induced labelling event. After a competitive or a sandwich immunoreaction, a biotinylated capture DNA was bound to a biotinylated signal antibody through avidin, and triggered the HCR by two specific hairpins into a nicked double helix. Gene Finder (GF), a fluorescent probe for double-strand DNA, was intercalated in situ into the amplified chain to produce the fluorescence signal. The limit of detection (LOD) for rabbit IgG in competitive mode by HCR/GF immunoassay was improved at least 100-fold compared with the traditional fluorescence immunoassay using the fluorescein isothiocyanate-labelled-streptavidin or fluorescein isothiocyanate-labelled second antibody as the signal readout. The proposed fluorescence immunoassay was also demonstrated by using α-fetoprotein as the model target in sandwich mode, and showed a wide linear range from 28 ng mL(-1) to 20 μg mL(-1) with a LOD of 6.0 ng mL(-1). This method also showed satisfactory analysis in spiked human serum, which suggested that it might have great potential for versatile applications in life science and point-of-care diagnostics.

A simple and novel reporter-triggered isothermal exponential amplification reaction (R-EXPAR) integrated with a miniaturized electrochemical device was developed, which achieved excellent improvement (five orders of magnitude) of sensitivity toward reporter, G-quadruplex. This R-EXPAR strategy has been successfully implemented to construct a homogeneous label-free electrochemical sensor for ultrasensitive DNA detection.

We have designed a non-membrane micro surface tension alveolus (MISTA) in a glass microchip for direct gas exchange and micro gradient control. Hemoglobin (Hb) in the liquid phase indicates the rapid gas gradient changes of O2 and CO2 shifted by the difference in pressure between the liquid and the gas.

A new 2D coordination polymer Co3(OH)2(pa)2(ina)2 (1, pa = 3-(1H-benzimidazol-2-yl) propanoic carboxylate, ina = isonicotinate) contained uncommon, linear Co(ii) trimers of mixed Td-Oh-Td geometries, exhibits spin canting below 20 K. Such magnetic behavior mainly arises from the Dzyaloshinski-Moriya interaction from the anisotropic, mixed geometries trimeric Co(II) ions to the crimpled 2D network based on the nature of the binding modes of Co(II)-carboxylate trimer and the effect of the intertrimers arrangement of 1. The mixed single-carboxylate-aromatic amine ligands bridged metal systems display a new structurally authenticated example of a thick 2D layer, and also indicate homometallic Co(II) clusters with Td-Oh-Td mixed-geometries can result in relatively obvious noncompensation moments, according to different efficient spins of Co(II) at very low temperature, in spite of antiferromagnetic intracluster interactions.