Search

Small-angle neutron scattering (SANS) and dynamic light scattering (DLS) experiments have been carried out to study the competitive effects of NaCl and sodium dodecyl sulfate (SDS) surfactant on the evolution of the structure and interactions in a silica nanoparticle–Bovine serum albumin (BSA) protein system. The unique advantage of contrast-matching SANS has been utilized to particularly probe the structure of nanoparticles in the multi-component system. Silica nanoparticles and BSA protein both being anionic remain largely individual in the solution without significant adsorption. The non-adsorbing nature of protein is known to cause depletion attraction between nanoparticles at higher protein concentrations. The nanoparticles undergo immediate aggregation in the nanoparticle–BSA system on the addition of a small amount of salt [referred as the critical salt concentration (CSC)], much less than that required to induce aggregation in a pure nanoparticle dispersion. The salt ions screen the electrostatic repulsion between the nanoparticles, whereby the BSA-induced depletion attraction dominates the system and contributes to the nanoparticle aggregation of a mass fractal kind of morphology. Further, the addition of SDS in this system interestingly suppresses nanoparticle aggregation for salt concentrations lower than the CSC. The presence of SDS gives rise to additional electrostatic repulsion in the system by binding with the BSA protein via electrostatic and hydrophobic interactions. For salt concentrations higher than the CSC, the formation of clusters of nanoparticles is inevitable even in the presence of protein–surfactant complexes, but the mass fractal kind of branched aggregates transform to surface fractals. This has been attributed to the BSA–SDS complex induced depletion attraction along with salt-driven screening of electrostatic repulsion. Thus, the interplay of depletion and electrostatic and hydrophobic interactions has been utilized to tune the structures formed in a multicomponent silica nanoparticle–BSA–SDS/NaCl system. [ABSTRACT FROM AUTHOR]

Batteries play an increasingly critical role in the functioning of contemporary society. To ensure future proofing of battery technology, new materials and methods that overcome the current shortcomings need to be developed. Here we report the use of the inexpensive and off the shelf metal–carboxylate, copper tartrate, as a high-capacity anode material for lithium-ion batteries, providing a specific capacity of 744 mA h g−1 when cycled at 50 mA g−1. Additionally, an unusual capacity gain with cycling is investigated using advanced techniques including X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), and small and ultra-small angle neutron scattering (SANS and USANS), providing insight into the structure–performance relationship of the electrode. Subsequently, a novel method of in situ generation of the active material is demonstrated using the reaction between the parent acid, tartaric acid, and the copper current collector during electrode formulation. This serves to increase and stabilise the electrode performance, as well as to make use of a cheaper feedstock (tartaric acid), and reduce some of the "dead mass" of the copper current collector. [ABSTRACT FROM AUTHOR]

New materials for battery electrodes are paramount to ensuring future battery supply can meet the ever-increasing demand for energy storage. Furthermore, detailed investigation on the various physical and chemical aspects of these materials is required to allow the same level of nuanced microstructural and electrochemical tuning that is available for conventional electrode materials. Here a comprehensive investigation is undertaken on the poorly understood in situ reaction between dicarboxylic acids and the copper current collector that occurs during electrode formulation, using a series of simple dicarboxylic acids. Specifically, we focus on the relationship between the extent of the reaction and the properties of the acid. Additionally, the extent of the reaction was demonstrated to affect both the electrode microstructure and the electrochemical performance. Scanning electron microscopy (SEM), X-ray diffraction (XRD) and small and ultra-small angle neutron scattering (U/SANS) are used to provide unprecedented detail on the microstructure ultimately leading to a deeper understanding of formulation based performance enhancing techniques. Ultimately, it was determined that the copper-carboxylates are the active material, not the parent acid, and in some cases i.e., copper malate, capacities as high as 828 mA h g-1 were achieved. This work lays the foundation for future studies that use the current collector as an "active" component in electrode formulation and function rather than simply an inactive component of a battery. [ABSTRACT FROM AUTHOR]

Two N-terminal capped tripeptides have been synthesised and display remarkable versatility in their gelation behaviour. Here, gelation can be triggered through the addition of an acid, biologically relevant metal salts or cell culture media. The structural and mechanical properties of the resultant hydrogels are tuneable, with gelation triggered through sodium cations amplifying secondary structure organisation yet decreasing gel stiffness. The effect of gelation trigger on cell viability is evaluated, with substantial improvement in cell survival observed when gelation is triggered using metal salts or cell culture media. [ABSTRACT FROM AUTHOR]

Bicelles are generally formed by phospholipid-based systems and are useful for various applications, such as nanocarriers or membrane protein crystallization. The same disc-like assemblies, nonionic surfactant bicelles (NSBs), can also be formed using nonionic amphiphiles, but this has not been reported extensively. We report a novel NSB system that employs the double-tailed nonionic amphiphile, polyglyceryl dialkyl ether (C12CmGn), which has two alkyl chains and a polyglyceryl group. A symmetric-tail molecule, C12C12G13.8, formed vesicles, whereas an asymmetric-tail molecule, C12C14G15.5, formed NSBs through a simple one-step process using ultrasonication. The 1 wt% aqueous solution of C12C14G15.5 was in a two-phase equilibrium of a lamellar phase and a water phase. Transparent dispersion was obtained through ultrasonication treatment. The size distribution in the dispersion was obtained by dynamic light scattering (DLS), resulting in a narrow distribution of around 20 nm in diameter. A negatively-stained transmission electron microscopy (TEM) image showed oblong and spherical shapes, which are typically observed in bicelle-forming systems. A small angle neutron scattering (SANS) measurement well proved bicelle formation by fitting a core–shell bicelle form factor model. The disc thickness and diameter were in agreement with the values obtained by DLS and TEM, respectively. A larger shell thickness at the rim part than at the flat disc part suggested that NSB aggregates have inhomogeneous molecular distribution. Similar to phospholipid systems, the bicelle-forming C12C14G15.5 system produced a defective lamellar phase formation at high surfactant concentrations, whereas a general lamellar phase was formed in the vesicle-forming C12C12G13.8 system. [ABSTRACT FROM AUTHOR]

We investigate the link between the internal microstructure of poly( N -isopropylacrylamide)-poly(ethylene glycol) methyl ether methacrylate (PNIPAM-PEGMA) microgels, their bulk moduli and the rheological response and structural arrangement in dense suspensions. The low degree of crosslinking combined with the increased hydrophilicity induced by the presence of PEGMA results in a diffuse, star-like density profile of the particle and very low values of the bulk modulus in dilute conditions, as determined by small angle neutron scattering (SANS). The ultrasoft nature of the particle is reflected in the changes of the structural arrangement in dense suspensions, which evidence a strong deswelling and a sharp rise of the bulk modulus at moderate packing fractions. At larger packings the single particle morphology and softness saturate, and we observe a structural transition from a dispersion-like to a hydrogel-like behavior. The transition is also reflected in the rheological response in the form of a two-step yielding at large packing fractions, characteristic of systems in which a network structure is present. Our results demonstrate that a knowledge of the internal structure and mechanics of individual microgels is needed to determine and tune the properties of dense suspensions, and optimize their response for applications in biomedicine and as filtration systems.

The controlled co-assembly of biomacromolecules through tuneable interactions offers a simple and fascinating opportunity to assemble multiple molecules into a single entity with enhanced complexity and unique properties. Herein, our study presents a dynamic co-assembled system using the multistimuli responsive intrinsically disordered protein Rec1-resilin and the adhesive hydrophilic protein silk sericin (SS). We utilized advanced characterization techniques including circular dichroism (CD) spectroscopy, dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and small/ultra-small angle neutron scattering (SANS/USANS) to elucidate the detailed co-assembly behavior of the system and its evolution over time and temperature. To achieve sufficient neutron contrast, we successfully biosynthesised deuterium-labeled Rec1-resilin (D-Rec1). Our research demonstrates that this co-assembly allows the formation of a robust entity with dynamic conformational assembly and disassembly, exhibiting both the upper critical solution temperature (UCST) and lower critical solution temperature (LCST) with reversibility. The assembly and disassembly dynamics of the co-assembled entity at UCST are very fast, while the process is kinetically controlled at LCST. This study provides significant new insights into the interplay of a hydrophilic, multi-responsive IDP and a highly hydrophilic protein, shaping the thermoresponsive and stable properties of the co-assembled entity.