Search

Gaseous SO2 acidification Ce-based catalysts were prepared and used for the selective reduction of NO with NH3. S–Ce was obtained by direct anaerobic sulfation of CeO2, while H–S–Ce was obtained by reduction of CeO2 and then anaerobic sulfation. Both S–Ce and H–S–Ce exhibited excellent SCR activity, and the S–Ce catalyst displayed the best catalytic performance. The activity of CeO2 was below 30% in the whole temperature range, while the activity of S–Ce reached 90% at 250 °C and remained 100% at 300–450 °C. Anaerobic sulfation could enhance the redox and surface acidity of the S–Ce catalyst. The acid sites favored NH3 adsorption, while the H–S–Ce catalyst exhibited considerable surface acidity, but the redox performance was weakened by stable sulfate. The reaction mechanism showed that a huge number of NH3 species adsorbed on S–Ce catalysts were consumed by NO gas. The present nitrate species and NO2 were removed. The SCR reaction followed E–R and L–H mechanisms for S–Ce. A large number of NH3 species on H–S–Ce were cleared by NO, and NO could hardly adsorb on its surface. The SCR reaction followed the E–R mechanism. [ABSTRACT FROM AUTHOR]

The development of ultrathin two-dimensional metal–organic framework nanosheets (2D MONs) has recently attracted increasing interest due to their extensive application potential originating from their ultrathin thickness, large surface area, and innumerable accessible surface-active sites. In this frontier article, we highlight the recent developments of 2D MONs for highly efficient heterogeneous catalysts; they can be grouped into three sections in terms of their functions: (i) as catalysts capable of showing outstanding intrinsic reactivity, (ii) as support materials for prevalent catalysts, and (iii) as catalysts with multifunctional catalytic activity for diverse organic transformations. In addition, the present challenges and future opportunities in this field are also discussed. [ABSTRACT FROM AUTHOR]

A gate-voltage-modulated strategy was proposed to improve the detection performance of telomerase. We comprehensively investigated the mechanism for the gate-voltage-modulated detection performance by modulating the electrostatic interaction between charges of a single-stranded DNA probe and electrons of the In2O3 channel. This gate-voltage-modulated interaction between the probe and the channel can potentially serve as a universal strategy for high-performance FET biosensors. [ABSTRACT FROM AUTHOR]

Covalent organic frameworks (COFs) are constructed using reticular chemistry with the building blocks being connected via covalent bonds and have emerged as a new series of porous materials for multitudinous applications. Most COFs reported to date are achiral, and only a small fraction of COFs with chiral nature are reported. This review covers the recent advances in the field of chiral COFs (CCOFs), including their design principles and synthetic strategies, structural studies, and potential applications in asymmetric catalysis, enantioselective separation, and chiral recognition. Finally, we illustrate the remaining challenges and future opportunities in this field. [ABSTRACT FROM AUTHOR]

Methanol-to-olefins (MTO) is a very important industrial catalysis technique for the production of light olefins, which is of great economic value and strategic significance. However, it is a great challenge for the traditional analytical methods to obtain the real-time information of product variation during MTO reaction process, which is vital for the conversion process research and mechanism explanation. In this study, a single photon ionization time-of-flight mass spectrometry (SPI-TOFMS) based on a windowless RF-discharge (WLRF) lamp was developed for real-time measurement of catalytic product during the initial stage of MTO reaction. The vacuum ultraviolet (VUV) photon energy was easily adjusted by changing the discharge gas. Argon (Ar) gas was eventually adopted as the discharge gas, since it produces photons with appropriate energy of 11.6 eV and 11.8 eV for ionization of light olefin molecules. The detection sensitivities of ethylene and propylene were largely improved to a substantially similar level with limits of detection (LODs) down to 16.98 and 9.64 ppbv, respectively. The initial stage of MTO reaction was real-time monitored with a high temporal resolution of 0.5 s, revealing that ethylene was the first olefin product followed by propylene. The successful application of WLRF-SPI-TOFMS in the monitoring of MTO catalytic process indicated broad application prospects of this instrument in the industrial reaction process monitoring. [ABSTRACT FROM AUTHOR]

A dopant-assisted reactive low temperature plasma (DARLTP) probe was developed for sensitive and specific detection of explosives by a miniature rectilinear ion trap mass spectrometer. The DARLTP probe was fabricated using a T-shaped quartz tube. The dopant gas was introduced into the plasma stream through a side-tube. Using CH2Cl2 doped wet air as the dopant gas, the detection sensitivities were improved about 4-fold (RDX), 4-fold (PETN), and 3-fold (tetryl) compared with those obtained using the conventional LTP. Furthermore, the formation of [M + 35Cl]− and [M + 37Cl]− for these explosives enhanced the specificity for their identification. Additionally, the quantities of fragment ions of tetryl and adduct ions such as [RDX + NO2]− and [PETN + NO2]− were dramatically reduced, which simplified the mass spectra and avoided the overlap of mass peaks for different explosives. The sensitivity improvement may be attributed to the increased intensity of reactant ion [HNO3 + NO3]−, which was enhanced 4-fold after the introduction of dopant gas. The limits of detection (LODs) for RDX, tetryl, and PETN were down to 3, 6, and 10 pg, respectively. Finally, an explosive mixture was successfully analyzed, demonstrating the potential of the DARLTP probe for qualitative and quantitative analysis of complicated explosives. [ABSTRACT FROM AUTHOR]

An in-source, stretched, hollow fiber membrane (HFM) inlet has been developed to improve the sensitivity of on-line time-of-flight mass spectrometry (TOFMS) with a vacuum ultraviolet (VUV) lamp based single photon ionization (SPI) source for the direct analysis of liquid samples. A 2-cm HFM was stretched to 8 cm in length, and placed in the ion source and directly under the VUV lamp window with a distance of 15 mm. Compared with the conventional flow-through configuration under the same experimental conditions, the signal intensities of selected volatile organic compounds (VOCs) of methyl tert-butyl ether (MTBE), ethyl tert-butyl ether (ETBE), benzene, toluene and p-xylene were increased over 5-fold in magnitude, and the response time was shortened to one-third. The limits of detection (LOD) of MTBE, ETBE, benzene, toluene and p-xylene ranged from 0.25 to 1.3 μg L−1 with a measurement time of 60 s, and three orders of linear range were obtained with correlation coefficients of 0.9972–0.9992. The present results suggest that the in-source stretched HFM is a simple and effective way to increase the sensitivity and shorten response time of the membrane inlet, and we believe that it will also be beneficial to other types of on-line mass spectrometer for the on-line analysis of VOCs in water with a VUV lamp based SPI ion source. [ABSTRACT FROM AUTHOR]

A platform consisting of a halogen lamp, a low temperature plasma (LTP) probe, and a miniature rectilinear ion trap mass spectrometer (RIT-MS) has been constructed and evaluated to detect organic and inorganic explosives on solid surfaces. This platform features two attractive characteristics: high sensitivity for the explosives with low volatility, and rapid analysis speed for the explosives on large surface areas. With non-contact heating by the halogen lamp, the signal intensities for the explosives with relatively high volatility were improved by over an order of magnitude, compared to those obtained at room temperature; and even more, the explosives with low volatility, which could hardly be detected at room temperature, were able to be readily identified. The limits of detection (LODs) of the selected explosives were all at the picogram level (e.g., 10 pg and 20 pg for TNT and RDX, respectively) with a heating time of 3 s. Using manual surface swabbing, the analysis of explosives on a large surface area (7.5 cm × 2.5 cm) was accomplished within 10 s, and an acceptable sensitivity could be acquired; additionally, inorganic explosives (black powder and firecracker) were successfully detected. Without any sample pretreatment, the platform was used to analyze the wastewater from an explosives factory, confirming the existence of 2,4,6-trinitrotoluene (TNT), 2,4-dinitrotoluene (2,4-DNT), and 2,6-dinitrotoluene (2,6-DNT), and the concentration of TNT was determined to be 5 ng mL−1. All these results indicated that the proposed platform was a promising technique for security monitoring and environmental analysis. [ABSTRACT FROM AUTHOR]