Search

In this study, a high-pressure-assisted photoinduced atom transfer radical polymerization (p ≤ 250 MPa) enabled the synthesis of ultra-high-molecular-weight polymers (UHMWPs) of up to 9 350 000 and low/moderate dispersity (1.10 < Đ < 1.46) in a co-solvent system (water/DMSO), without reaction mixture deoxygenation. [ABSTRACT FROM AUTHOR]

In this paper, we have examined a series of phenyl-substituted primary monohydroxy alcohols (phenyl alcohols, PhAs), from ethanol to hexanol by means of dielectric and Fourier transform infrared (FTIR) spectroscopies supported by the mechanical investigations. The combination of both dielectric and mechanical data allows calculation of the energy barrier, Ea, for dissociation by the Rubinstein approach developed to describe the dynamical properties of self-assembling macromolecules. It was observed that the determined activation energy remains constant, ‖Ea,RM‖ ∼ 12.9–14.2 kJ mol−1, regardless of the molecular weight of the examined material. Surprisingly, the obtained values agree very well with Ea of the dissociation process determined from the FTIR data analysed within the van't Hoff relationship, where Ea,vH ∼ 9.13–13.64 kJ mol−1. Thus, the observed agreement between Ea determined by both applied approaches clearly implies that in the case of the examined series of PhAs, the dielectric Debye-like process is governed by the association–dissociation phenomenon as proposed by the transient chain model. [ABSTRACT FROM AUTHOR]

In this paper, efficient MMA photo O-ATRP protocols conducted inside nanoreactors varying in nanostructured interfaces are reported for the first time. We showed that the microstructure of recovered polymers could be easily tuned just by implementing a given type of nanochannel (d = 10, 19–28, 35, 160 nm). [ABSTRACT FROM AUTHOR]

We show the remarkable effect of using static (DC) and alternating (AC) electric fields to control the free-radical polymerization of methyl methacrylate (MMA). The magnitude and/or frequency of the applied electric field (up to 154 kV cm−1) were found to control the molecular weight, dispersity, and stereochemistry of the produced polymers. [ABSTRACT FROM AUTHOR]

In this paper, we have analyzed structural, thermal, and dynamical properties of four azole antifungals: itraconazole (ITZ), posaconazole (POS), terconazole (TER) and ketoconazole (KET), differing mainly in the length of the rod-like backbone and slightly in side groups. Our investigations clearly demonstrated that the changes in the chemical structure result in a different ability to form the medium-range order (MRO) and variation in thermal and dynamical properties of these pharmaceuticals. Direct comparison of the diffractograms collected for glassy and crystalline materials indicated that the MRO observed in the former phases is related to maintaining the local molecular arrangement of the crystal structure. Moreover, it was shown that once the MRO-related diffraction peaks appear, additional mobility (δ- or α′ relaxation), slower than the structural (α)-process, is also detected in dielectric spectra. This new mode is connected to the motions within supramolecular nanoaggregates. Detailed analysis of dielectric and calorimetric data also revealed that the variation in the internal structure and MRO of the examined pharmaceuticals have an impact on the glass transition temperature (Tg) shape of the α-process, isobaric fragility, molecular dynamics in the glassy state and number of dynamically correlated molecules. These findings could be helpful in an understanding the influence of different types of intermolecular MRO on the properties of substances having a similar chemical backbone. [ABSTRACT FROM AUTHOR]

Broadband dielectric spectroscopy (BDS), combined with the X-ray diffraction (XRD) and Fourier transform infrared (FTIR) techniques, was used to study the dynamics of the primary (α) relaxation process and slow mode (SM), as well as structural properties and intermolecular interactions, in the methyl-, isopropyl-, hexyl-, and benzyl derivative of a well-known pharmaceutical, ibuprofen (IBU). Unexpectedly, the XRD and FTIR methods revealed the formation of medium-range ordering together with some molecular organization, which probably leads to the creation of small aggregates at the scale of several microns at lower temperatures. Moreover, high pressure dielectric experiments revealed that the SM (observed in the ambient pressure data) is not detected in the loss spectra of compressed IBU esters, which is consistent with the results reported previously for propylene carbonate and dioxolane derivatives. This finding can be interpreted as connected to either the comparable time scale of the structural dynamics and slow mode or suppression of the motions responsible for the latter process at elevated pressure. Additionally, it was found that the pressure coefficient of the glass transition temperature (dTg/dp) and activation volume (ΔV) change with molecular weight (Mw) in a non-monotonic way. It might be related to various chemical structures, conformations, and intermolecular interactions, as well as different architecture of supramolecular aggregates in the investigated compounds. [ABSTRACT FROM AUTHOR]

We report, for the first time, the metal-free green synthesis of linear poly(vinyl pyrrolidone) (PVP) homopolymers of molecular weight higher than 100 kg mol−1 and narrow dispersities via thermal and photo-induced free radical polymerisation carried out within alumina nanoporous membranes acting as “nanoreactors”. [ABSTRACT FROM AUTHOR]

Differential Scanning Calorimetry (DSC), X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) and Broadband Dielectric (BD) spectroscopies were applied to investigate the thermal, structural, photochemical and dynamical properties of a fulgide-type photochromic compound, Aberchrome 670 (Ab670). In the original crystals, characterized by a pale yellow color, molecules take the E conformation. However, upon UV irradiation of either the crystalline or glassy compound, it isomerizes to the closed (C) form, characterized by the intense red tone. Although, we have found that such conversion is not complete (far below 100%). It was shown that due to UV irradiation as well as heating of the studied fulgide to high temperature (above the melting point), the Z isomer is formed. Further FTIR measurements performed on the UV irradiated and molten compound indicated that upon annealing of the sample in the vicinity of the glass transition temperature the Z isomer reverts back to the original E form. The final confirmation of this supposition has come from BDS studies, where the strong shift of the structural relaxation process during time-dependent isothermal measurements was noticed. One can add that a similar pattern of behavior has been observed previously by some of us in the case of tautomerism or mutarotation [Z. Wojnarowska et al., J. Chem. Phys., 2010, 133, 094507; W. Kossack et al., J. Chem. Phys., 2014, 140, 215101; P. Wlodarczyk et al., J. Phys. Chem. B, 2009, 113, 4379–4383; P. Wlodarczyk et al., J. Non-Cryst. Solids, 2010, 356, 738–742]. From the analysis of the time variation of the structural relaxation times, the activation barrier, EA = 18 kJ mol−1, for Z to E isomerization in Ab670 was calculated. Interestingly, it agrees well with the one determined for a similar kind of transformation in stilbenes. Therefore, we found that dielectric spectroscopy can be a very useful technique to track Z to E interconversion in the highly viscous supercooled state. Consequently, a unique opportunity to follow this kind of isomerism at high pressures, high electric fields and under nanometric spatial confinement in pure supercooled compounds appeared. [ABSTRACT FROM AUTHOR]

Broadband dielectric spectroscopy (BDS), combined with the X-ray diffraction (XRD) and Fourier transform infrared (FTIR) techniques, was used to study the dynamics of the primary (α) relaxation process and slow mode (SM), as well as structural properties and intermolecular interactions, in the methyl-, isopropyl-, hexyl-, and benzyl derivative of a well-known pharmaceutical, ibuprofen (IBU). Unexpectedly, the XRD and FTIR methods revealed the formation of medium-range ordering together with some molecular organization, which probably leads to the creation of small aggregates at the scale of several microns at lower temperatures. Moreover, high pressure dielectric experiments revealed that the SM (observed in the ambient pressure data) is not detected in the loss spectra of compressed IBU esters, which is consistent with the results reported previously for propylene carbonate and dioxolane derivatives. This finding can be interpreted as connected to either the comparable time scale of the structural dynamics and slow mode or suppression of the motions responsible for the latter process at elevated pressure. Additionally, it was found that the pressure coefficient of the glass transition temperature (dTg/dp) and activation volume (ΔV) change with molecular weight (Mw) in a non-monotonic way. It might be related to various chemical structures, conformations, and intermolecular interactions, as well as different architecture of supramolecular aggregates in the investigated compounds.