Search

The use of simultaneous neutron powder diffraction (NPD) and microwave characterisation can provide more information than the use of either technique individually; for example, it enables the differentiation of physisorbed and metal-coordinated species. Many possible experiments using these combined techniques can benefit from the addition of a heat source for sample heating, such as real-time measurements of solvent removal, or chemical and catalytic reactions. This paper documents the design of equipment to conduct simultaneous NPD and 2.5 GHz microwave cavity resonance techniques at elevated temperatures and confirms the use of this equipment for successful desolvation of a metal-organic framework (MOF) sample at 150 °C. The high sensitivity of microwave characterisation of lossy and polar materials is demonstrated at levels much lower than those that can be detected using crystallographic techniques.

Ammonia absorption has been investigated in metal-organic frameworks (UiO-67, HKUST-1 and CPO-27-Co) using custom-built apparatus that allows simultaneous neutron powder diffraction (NPD), microwave dielectric characterisation and out-gas mass spectroscopy of solid-state materials during ammonia adsorption. Deuterated ammonia was flowed through the sample and absorption monitored using mass flow meters and mass spectroscopy. Argon gas was then flowed through the ammoniated sample to cause ammonia desorption. Changes in structure found from NPD measurements were compared to changes in dielectric characteristics to differentiate physisorbed and metal-coordinated ammonia, as well as determine decomposition of sample materials. The results of these studies allow the identification of materials with useful ammonia storage properties and provides a new metric for the measurement of gas absorption within mesoporous solids.

We have investigated ammonia adsorption in group two halides (MgI2 and CaBr2) using custom-built apparatus that permits simultaneous neutron diffraction, microwave dielectric characterisation and out-gas mass spectroscopy of solid state materials during ammonia adsorption. Deuterated ammonia was flowed over the sample and the uptake - as measured by mass flow meters, mass spectroscopy and structure - compared with the change in dielectric constant. An excellent correlation between ammonia content and dielectric property was observed and, when linked to diffraction, mass flow and mass spectroscopy data, could be used to determine the amount of ammonia present within the solid. The combination of these techniques could also be used to differentiate physisorbed and metal-coordinated ammonia and explain subtleties in the observed structural transformations.

Ni/Al2O3, Co/Al2O3 and bimetallic Ni(Co)/Al2O3 catalysts were prepared using an impregnation method and employed in CO2 dry reforming of methane under coking-favored conditions. The spent catalysts were carefully characterized using typical characterization technologies and inelastic neutron scattering spectroscopy. The bimetallic catalyst exhibited a superior activity and anti-coking performance compared to Ni/Al2O3, while the most resistant to coking behavior was Co/Al2O3. The enhanced activity of the Ni(Co)/Al2O3 bimetallic catalyst is attributed to the reduced particle size of metallic species and resistance to forming stable filamentous carbon. The overall carbon deposition on the spent bimetallic catalyst is comparable to that of the spent Ni/Al2O3 catalyst, whereas the carbon deposited on the bimetallic catalyst is mainly less-stable carbonaceous species as confirmed by SEM, TPO, Raman and INS characterization. This study provides an in depth understanding of alloy effects in catalysts, the chemical nature of coked carbon on spent Ni-based catalysts and, hopefully, inspires the creative design of a new bimetallic catalyst for dry reforming reactions.

We demonstrate that the ammonia decomposition reaction catalysed by sodium amide proceeds under a different mechanism to ammonia decomposition over transition metal catalysts. Isotopic variants of ammonia and sodium amide reveal a significant kinetic isotope effect in contrast to the nickel-catalysed reaction where there is no such effect. The bulk composition of the catalyst is also shown to affect the kinetics of the ammonia decomposition reaction.

We demonstrate that non-stoichiometric lithium imide is a highly active catalyst for the production of high-purity hydrogen from ammonia, with superior ammonia decomposition activity to a number of other catalyst materials. Neutron powder diffraction measurements reveal that the catalyst deviates from pure imide stoichiometry under ammonia flow, with active catalytic behaviour observed across a range of stoichiometry values near the imide. These measurements also show that hydrogen from the ammonia is exchanged with, and incorporated into, the bulk catalyst material, in a significant departure from existing ammonia decomposition catalysts. The efficacy of the lithium imide-amide system not only represents a more promising catalyst system, but also broadens the range of candidates for amide-based ammonia decomposition to include those that form imides.

The location of hydrogen within Ti-Cr-V-Mo alloys has been investigated during hydrogen absorption and desorption using in situ neutron powder diffraction and inelastic neutron scattering. Neutron powder diffraction identifies a low hydrogen equilibration pressure body-centred tetragonal phase that undergoes a martensitic phase transition to a face-centred cubic phase at high hydrogen equilibration pressures. The average location of the hydrogen in each phase has been identified from the neutron powder diffraction data although inelastic neutron scattering combined with density functional theory calculations show that the local structure is more complex than it appears from the average structure. Furthermore the origin of the change in dissociation pressure and hydrogen trapping on cycling in Ti-Cr-V-Mo alloys is discussed.

We report the experimental investigation of hydrogen storage and release in the lithium amide-lithium hydride composite (Li-N-H) system. Investigation of hydrogenation and dehydrogenation reactions of the system through in situ synchrotron X-ray powder diffraction experiments allowed for the observation of the formation and evolution of non-stoichiometric intermediate species of the form Li1+xNH2-x. This result is consistent with the proposed Frenkel-defect mechanism for these reactions. We observed capacity loss with decreasing temperature through decreased levels of lithium-rich (0.7 ≤ x ≤ 1.0) non-stoichiometric phases in the dehydrogenated material, but only minor changes due to multiple cycles at the same temperature. Annealing of dehydrogenated samples reveals the reduced stability of intermediate stoichiometry values (0.4 ≤ x ≤ 0.7) compared with the end member species: lithium amide (LiNH2) and lithium imide (Li2NH). Our results highlight the central role of ionic mobility in understanding temperature limitations, capacity loss and facile reversibility of the Li-N-H system.

The structure of the cubic polymorph of magnesium tetrahydroborate (γ-Mg(BH(4))(2)) has been determined in space group Ia3d from a structural database of the isoelectronic compound SiO(2); this has been corroborated by DFT calculations. The structure is found to concur with that recently determined by Filinchuk et al. (Y. Filinchuk, B. Richter, T. R. Jensen, V. Dmitriev, D. Chernyshov and H. Hagemann, Angew. Chem. Int. Ed., 2011, DOI: 10.1002/anie.201100675). The phase transformations and subsequent decomposition of γ-Mg(BH(4))(2) on heating have been ascertained from variable-temperature synchrotron X-ray diffraction data combined with thermogravimetric and mass spectrometry measurements. At ~160 °C, conversion to a disordered variant of the β-Mg(BH(4))(2) phase (denoted as β') is observed along with a further unidentified polymorph. There is evidence of amorphous phases during decomposition but there is no direct crystallographic indication of the existence of Mg(B(12)H(12)) or other intermediate Mg-B-H compounds. MgH(2) and finally Mg are observed in the X-ray diffraction data after decomposition.

A combination of inelastic neutron scattering (INS) spectroscopy and Raman spectroscopy with periodic density functional theory calculations is used to provide a complete assignment of the vibrational spectra of α-lithium amidoborane (α-LiNH(2)BH(3)). The Born charge density and the atomic motion up to the decomposition temperature have been modelled. These models not only explain the nature of bonding in α-LiNH(2)BH(3) but also provide an insight into the atomic mechanisms of its decomposition. The (INS) measurements were performed in the range of 0-4000 cm(-1) on the high-resolution time-of-flight TOSCA INS spectrometer at the ISIS Spallation Neutron Source at the Rutherford Appleton Laboratory.

An ultrasound-assisted, precipitation-deposition method has been developed to synthesise visible-light-responsive BiOBr-ZnFe(2)O(4) heterojunction photocatalysts. The heterojunctions with suitable BiOBr/ZnFe(2)O(4) ratios have a fascinating micro-spherical morphology and exhibit exceptional photocatalytic activity in visible-light degradation of Rhodamine B., (© The Royal Society of Chemistry 2011)

Materials displaying the remarkable combination of high electrical conductivity and optical transparency already from the basis of many important technological applications, including flat panel displays, solar energy capture and other opto-electronic devices. Here we present the basic materials physics of these important materials centred on the nature of the doping process to generate n-type conductivity in transparent conducting oxides, the associated transition to the metallic (conducting) state and the detailed properties of the degenerate itinerant electron gas. The aim is to fully understand the origins of the basic performance limits of known materials and to set the scene for new or improved materials which will breach those limits for new-generation transparent conducting materials, either oxides, or beyond oxides.