Search

In this work, we developed the concept of enzyme catalysis–electrophoresis titration (EC-ET) under ideal conditions, the theory of EC-ET for multiplex enzymatic assay (MEA), and a related method based on a moving reaction boundary (MRB) chip with a collateral channel and cell phone imaging. As a proof of principle, the model enzymes horseradish peroxidase (HRP), laccase and myeloperoxidase (MPO) were chosen for the tests of the EC-ET model. The experiments revealed that the EC-ET model could be achieved via coupling EC with ET within a MRB chip; particularly the MEA analyses of catalysis rate, maximum rate, activity, Km and Kcat could be conducted via a single run of the EC-ET chip, systemically demonstrating the validity of the EC-ET theory. Moreover, the developed method had these merits: (i) two orders of magnitude higher sensitivity than a fluorescence microplate reader, (ii) simplicity and low cost, and (iii) fairly rapid (30 min incubation, 20 s imaging) analysis, fair stability (＜5.0% RSD) and accuracy, thus validating the EC-ET method. Finally, the developed EC-ET method was used for the clinical assay of MPO activity in blood samples; the values of MPO activity detected via the EC-ET chip were in agreement with those obtained by a traditional fluorescence microplate reader, indicating the applicability of the EC-ET method. The work opens a window for the development of enzymatic research, enzyme assay, immunoassay, and point-of-care testing as well as titration, one of the oldest methods of analysis, based on a simple chip. [ABSTRACT FROM AUTHOR]

A highly efficient three-phase single drop microextraction (SDME) method is presented by using an organic–aqueous compound droplet. A coupling microdevice is designed to produce compound droplets in different sizes conveniently. In this way, the volume ratio of organic phase to aqueous phase in a compound droplet can be significantly reduced. Good operability and droplet stability were observed during extraction under vigorous stirring conditions. Five statins were used as model compounds and spiked in river water and human serum samples to evaluate the analytical performance of the proposed method. By using a 1.2 μL toluene–aqueous compound droplet (volume ratio 0.2 : 1), a 350 to 1712 fold enrichment of statins was obtained within 4 minutes. The results indicate that the proposed method is a very rapid and efficient sample pretreatment method, and is promising for automated and high-throughput applications. [ABSTRACT FROM AUTHOR]

Herein, a simple assembly was designed via a capillary and a funnel-like cap to achieve liquid–gas compound pendant drop (CPD) microextraction with great convenience. Due to the increased contact area and adhesion force between the capillary tip and the drop, the proposed method provides considerable flexibility in producing CPDs with different air bubble sizes. Four pesticides were chosen as model analytes to evaluate the proposed method. By using a 1 μL chlorobenzene droplet containing a 1 μL air bubble at a stirring rate of 700 rpm, a 70 to 135-fold enrichment of pesticides was obtained within 3.4 minutes. As compared with a typical SDME, the proposed method showed a 2-fold increase of enrichment factors and a 4-fold decrease of extraction time. Improvement of the extraction efficiency could be ascribed to the increased surface area of the droplet, and the thin film phenomena further improved the extraction kinetics through effective agitation. The results indicate that CPD microextraction could serve as a promising sample pretreatment method for automated high-throughput analyses in a wide variety of research areas. [ABSTRACT FROM AUTHOR]

Here we synthesized Bi 2 WO 6 (BWO) using both solid-state reaction (SBWO) and hydrothermal (HBWO-U and HBWO-S) methods. The orthorhombic Pca 2 1 phase purity in all samples is confirmed from Rietveld refinement of X-ray diffraction data, Raman spectroscopy, and Fourier transform infrared spectroscopy. The HBWO-U and HBWO-S morphology revealed rectangular, spherical, and rod-like features with an average particle size of 55 nm in field emission scanning electron micrographs. A high-resolution transmission electron micrograph showed spherical-shaped particles in the HBWO-U sample with an average diameter of ∼10 nm. The diffuse reflectance-derived indirect electronic band gaps lie within the 2.79-3.23 eV range. The BWO electronic structure is successfully modeled by Hubbard interaction U d and U p corrected Perdew-Burke-Ernzerhof generalized gradient approximation GGA-PBE+ U d + U p with van der Waals (vdW) force in effect. The optimized ( U d , U p ) values are further justified by tuning the Hartree-Fock (HF) exact-exchange mixing parameter α HF from 25% in Heyd-Scuseria-Ernzerhof (HSE06) to 20% in the PBE-HF20% functional. Moreover, no inconsistencies were seen in the GGA-PBE+ U d + U p +vdW simulated crystallographic parameters, and the elastic tensor, phonon, and linear optical properties. Overall, the computationally cheap GGA-PBE+ U d + U p with vdW force may have successfully probed the physical properties of BWO., Competing Interests: The authors declare no competing interests., (This journal is © The Royal Society of Chemistry.)