Search

Hydrogen, highly valued for its pristine cleanliness and remarkable efficiency as an emerging energy source, is anticipated to ascend to a preeminent status within the forthcoming energy landscape. Electrocatalytic water splitting is considered a pivotal, eco-friendly, and sustainable strategy for hydrogen production. The substantial energy consumption stemming from oxygen evolution side reactions significantly impedes the commercial viability of water electrolysis. Consequently, the pursuit of a cost-effective and efficacious oxygen evolution reaction (OER) catalyst stands as an imperative strategy for realizing hydrogen production via water electrolysis. Layered metal oxides, owing to their robust anisotropic properties, versatile adjustability, and extensive surface area, have emerged as suitable candidates for OER catalysts. However, owing to the distinctive attributes of layered metal oxides, ongoing investigations into these materials are slightly fragmented, lacking universal consensus. This article comprehensively surveys the recent advancements in layered metal oxide-based OER catalysts, categorized into single metal oxides, alkali cobalt oxides, perovskites, and miscellaneous metal oxides. Initially, the main OER intermediate reaction steps of layered metal oxides are scrutinized. Subsequently, the design, mechanism, and application of several pivotal layered metal oxides in the OER are systematically delineated. Finally, a summary is provided, alongside the proposal of future research trajectories and challenges encountered by layered metal oxides, with the aspiration that this paper may serve as a valuable reference for scholars in the field. [ABSTRACT FROM AUTHOR]

The development of high-performance and cost-effective electrocatalysts for the oxygen evolution reaction (OER) is critical to renewable energy conversion and storage technologies. Among of them, metal organic frameworks (MOFs) have been proved to be effective substitutes for precious metals. In this paper, a series of mixed NiCoFe-MOFs with low crystallinity were synthesized by a simple one-step solvothermal method, which can be used as a direct electrocatalyst for the OER. Notably, the flower-like nanocatalyst NiCoFe-MOF-2 exhibits a hierarchical pore network and a large specific surface area (149.6 m2 g−1), which results in an adjustable electronic structure, effective mass transfer, and abundant exposed active sites. In addition, due to the synergy between the three metals Fe, Co and Ni, NiCoFe-MOF-2 can exhibit excellent electrocatalytic OER performance, with a low overpotential of 321 mV at 10 mA cm−2, superior to commercial RuO2 (379 mV), a Tafel slope of 48 mV dec−1 and long-term stability. The result may stimulate more designs of MOF-derived catalysts with multi-scale structures and multi-components designed for various electrochemical energy conversion devices. [ABSTRACT FROM AUTHOR]

Efficient electrocatalysts are in great demand for renewable energy storage systems. Herein, we propose an ultrafast heating strategy to fabricate an efficient Ir/CP-UH catalyst for the oxygen evolution reaction (OER). Experimental results demonstrated that the ultrasmall Ir nanoparticles (≈1–3 nm) and clusters (<1 nm) were highly dispersed on the carbon paper support after a short thermal shock (∼5 s). The catalyst showed a low overpotential of 260 mV at 10 mA cm−2 and remarkable mass activity of about 13.8 times higher than that of the current state-of-the-art commercial Ir/C catalyst. This ultrafast heating strategy can also be applied to other catalyst systems for OER and other electrochemical reactions. [ABSTRACT FROM AUTHOR]

In recent years, as a green renewable energy production technology, electrochemical water splitting has demonstrated high development potential. Many materials have been reported as successful catalysts in the water-splitting field. However, it is still a huge challenge to produce bifunctional electrocatalysts for the efficient and sustainable generation of hydrogen and oxygen simultaneously. Herein, we successfully developed oxygen vacancies abundant CuCo layered double oxide (Ov-CuCo-LDO) hollow nanotube arrays (HNTAs) loaded on nickel foam as advanced electrocatalysts for total water splitting. When the current density was 10 mA cm−2, the Ov-CuCo-LDO HNTAs exhibited outstanding onset overpotentials of 53.9 and 72.5 mV for the hydrogen evolution and oxygen evolution reactions (HER and OER) in alkaline medium, respectively, because of the bimetallic synergistic effect between the cobalt and copper and the unique hollow porous structure. In addition, an as-assembled Ov-CuCo-LDO‖‖Ov-CuCo-LDO electrolytic cell showed a small potential of 1.55 V to deliver a current density of 10 mA cm−2. Moreover, it also showed remarkable durability after long-term overall water splitting for more than 20 h. The research results in this paper are of great interest to practical applications of the water decomposition process, providing clear and in-depth insights into preliminary robust and efficient multifunctional electrocatalysts for overall water splitting. [ABSTRACT FROM AUTHOR]

Nickel-based electrocatalysts for the oxygen evolution reaction (OER) show the disadvantages of low activity and poor stability. In this paper, an FeNi alloy is wrapped by an amino-modified MOF-5-derived N-doped carbon layer to address these problems. Additionally, the improvement resulting from Fe doping of NiOOH catalysts is theoretically supported. [ABSTRACT FROM AUTHOR]

Facile preparation of low-cost electrocatalysts for an efficient oxygen evolution reaction (OER) is significant but remains a big challenge. Herein, a novel and facile strategy for transforming intrinsic non-stoichiometric ultrathin Co5(O9.48H8.52)NO3 nanosheets into oxygen-vacancy enriched Co3O4/CoOOH heterostructure nanosheets for an efficient OER was developed. The as-synthesized Co3O4/CoOOH heterostructure nanosheets displayed excellent OER performances, showing an extremely low overpotential of 260 mV at a current density of 10 mA cm−2, a relatively small Tafel slope of 52 mV dec−1, and a long-term durability of at least 20 h. This work provides a new way for the production of oxygen vacancies on metal (oxy)hydroxide nanosheets through electric-field assisted in situ transformation of non-stoichiometric metal oxyhydroxide nanosheets. [ABSTRACT FROM AUTHOR]

Constructing highly efficient electrocatalysts is vital to enhance oxygen evolution reaction (OER) performance at industrially relevant current densities. Herein, three-phase coupled Ni3S2/r-NiS/h-NiS composites are grown in situ on Ni foam (NNSN/NF) via a one-step solvothermal approach. The as-prepared composites need overpotentials of only 377 mV, 451 mV and 476 mV at 1000 mA cm−2 for the OER in alkaline freshwater, simulated seawater and seawater, respectively. In addition, the optimized catalyst exhibited long-term durability at 300 mA cm−2. Our work clarifies designing and preparing cost-effective Ni-based sulfide electrocatalysts for the OER in alkaline freshwater/simulated seawater/seawater under industrially relevant current densities. [ABSTRACT FROM AUTHOR]

Active and stable electrocatalysts based on earth-abundant elements for the acidic oxygen evolution reaction (OER) are crucial for hydrogen production using proton-exchange membrane water electrolyzers. Herein, nickel-doped manganese oxide nanorods (Ni–MnO2) are prepared using a hydrothermal method in an acidic environment. The nanorods exhibit moderate stability towards the OER in 0.1 M HClO4. Doping Ni enhances OER activity, which originates from the electronic interaction that tunes the adsorption energy of OH*, which is an important OER intermediate. The most active electrode exhibits an overpotential of 390 mV to reach 10 mA cm−2 OER current density in 0.1 M HClO4. All electrodes prepared are stable towards 10 mA cm−2 galvanostatic test for at least 5 h. The dissolution of Ni and Mn species is observed, and the crystalline phase transforms to the amorphous phase under prolonged OER. [ABSTRACT FROM AUTHOR]

The hydrogen evolution reaction (HER), as a pivotal half-reaction, significantly hinders the advancement of energy conversion efficiency. Metal electrodeposition on catalysts has been demonstrated to effectively enhance the HER reactivity. Here, Ni3S2–Fe–Ni with a multilayer structure was obtained by the electrodeposition of Ni3S2 with dopants Fe/Ni, in which a number of active sites were achieved and the intrinsic conductivity of the catalyst was well improved. Elemental analyses revealed the multilayer structure consisting of Ni3S2, NiS, and Fe. The Ni3S2–Fe–Ni catalyst exhibited impressive electrochemical performance due to optimization of its structure with the overpotentials of the HER and OER of only 83 and 190 mV. Notably, at a higher current density of 100 mA cm−2, the overpotentials for the HER and OER are only 339 and 365 mV. As a bifunctional electrocatalyst, its total splitting voltage was only 1.55 V. The catalysis performance remained nearly unchanged even after 48 h of stability testing. Finally, density functional theory (DFT) calculations revealed that the potential barriers in each reaction step of the OER are evenly distributed, and optimizing the Ni3S2 structure with iron and nickel atoms reduced the reaction energy barriers during the electrochemical process, improving the OER/HER performance. [ABSTRACT FROM AUTHOR]

The strategies for optimizing the morphology/structure and regulating the active sites of materials are effective ways to improve their electrocatalytic performance in the hydrogen evolution reaction (HER) and electrooxidation reaction. Herein, we demonstrate a facile strategy for constructing a NiO/NiCo2O4 porous nanowire catalyst on nickel foam (NiO/NiCo2O4/NF) as a bifunctional electrocatalyst to enhance the electrocatalytic performance for coupling the HER with the glucose oxidation reaction (GOR). Benefiting from the unique 1D porous nanowire structure and enhanced interfacial synergistic effect of the bicomponent catalyst, optimized NiO/NiCo2O4/NF-300 exhibited remarkable electrocatalytic activities for the GOR and HER with low potentials of 1.128 V and 0.212 V, respectively, at 100 mA cm−2. Moreover, the GOR exhibited a high yield of 72% for formic acid. This study provides a promising and simple strategy for the construction of 1D NiO/NiCo2O4 porous nanowire electrocatalysts with rich heterogeneous interfaces and paves a facile pathway for accelerating biomass electrochemical reaction-assisted hydrogen production. [ABSTRACT FROM AUTHOR]

Water electrolysis is one of the most promising approaches for producing hydrogen. However, the OER, kinetics are sluggish and necessitate highly efficient electrocatalysts to speed up the reaction. In this work, we used NiCo glycerate solid nanospheres as a precursor to construct Fe–Ni–Co trimetallic oxide nanospheres utilizing a solvothermal-annealing and stirring technique. The oxygen evolution reaction (OER) activity of the Fe–Ni–Co spheres was greatly enhanced after Fe doping. Among these samples, the FeNiCo-15 hierarchical yolk–shell spheres needed overpotentials of only 204 and 178 mV for the OER and HER, respectively, to drive a current density of 10 mA cm−2, and showed good electrochemical stability. Further, it also presented superior electrocatalytic activity in terms of full water splitting, which was comparable to the integrated performance of the Pt‖IrO2 couple. A cell voltage of only 1.61 V was required to attain a current density of 10 mA cm−2. This paper provides a promising method for developing efficient bifunctional electrocatalysts driving redox electrocatalysis. [ABSTRACT FROM AUTHOR]

The development of earth-abundant and high-efficiency electrocatalysts for overall water splitting is highly fascinating and still presents a challenge caused by the low activity for both the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) at the same time. In this paper, active cobalt-doped pyrite nanospheres with a porous structure are fabricated for the first time as advanced catalysts for water splitting in an alkaline solution. With the incorporation of cobalt atoms, the electronic structure of pyrite is well-tuned, with high conductivity as well as more active sites being obtained, which finally results in a superior bifunctional water splitting performance. Only 1.60 V is required to reach the current density of 10 mA cm−2, which is smaller than that of other transition metal sulfides. [ABSTRACT FROM AUTHOR]

Due to the slow reaction kinetics of the oxygen evolution reaction (OER), the electrolysis rate of water is greatly limited. Therefore, it is of great significance to study stable and efficient non-noble metal based electrocatalysts. In this paper, three-dimensional (3D) spherical V-NiFe LDH@Ni3S2 was developed by exquisitely decorating ultra-thin V-doped NiFe layered dihydroxide (NiFe-LDH) on Ni3S2 nanosheets supported by nickel foam (NF). It is worth mentioning that V-NiFe LDH@Ni3S2 exhibits an excellent electrocatalytic performance and only 178 mV overpotential is required in 1 M KOH to achieve a current density of 10 mA cm−2. Long-term chronoamperometry manifests its superior electrochemical stability. The combination of NiFe LDH and conductive substrate coupling can drastically afford abundant active sites and accelerate charge transfer, and V doping can markedly regulate the electronic structure. Therefore, the activity and durability of the electrocatalysts are greatly improved. This study may provide a new strategy for the preparation of efficient OER electrocatalysts. [ABSTRACT FROM AUTHOR]

Two new heteroleptic cobalt(III)dialkyldithiophosphate complex cations with a 1,2-bis(diphenylphosphino)ethane (dppe) ancillary ligand having formula [Co{S2P(OR)2}2(dppe)](B(C6H5)4) (R = –C2H5 (Co–Et); –CH(CH3)2 (Co–Pr)) have been synthesized and characterized spectroscopically as well as via single crystal X-ray diffraction analysis. The single crystal X-ray diffraction analyses reveal that the immediate geometries around Co(III) in both complexes are distorted octahedral, which are satisfied by four sulfur atoms of two dialkyldithiophosphate ligands and two phosphorus centers of the dppe ligand. These complex cations are neutralized by tetraphenyl borate B(C6H5)4 anions. The solid-state framework of both complexes are stabilized by C–H⋯π and C–H⋯C interactions. The nature of these interactions have been addressed with the help of Hirshfeld surface analysis, and percent contributions of pertinent interactions in the crystal structure of these complexes have been addressed using fingerprint plots. Both complexes have been used as heterogeneous electrocatalysts for the oxygen evolution reaction (OER). Results suggest that Co–Et is a better electrocatalyst for the OER, displaying an onset potential of 1.68 V and Tafel slope of 114 mV dec−1. Furthermore, in the homogeneous electrocatalysis of the hydrogen evolution reaction (HER) using trifluoroacetic acid, the overpotential for Co–Et and Co–Pr have been 1.05 V and 0.92 V, respectively, with turnover frequencies of 1518 s−1 and 287.5 s−1, respectively. Overall, heterogeneous OER and homogenous HER results suggest that Co–Et can be used as an efficient molecular electrocatalyst for oxygen/hydrogen evolution reactions. [ABSTRACT FROM AUTHOR]

The unsatisfactory performance of the oxygen evolution reaction (OER) and the complex preparation methods are the main challenges hindering the industrial application of OER electrocatalysts in electrochemical water splitting for hydrogen production. Herein, a convenient two-step method including electrodeposition and subsequent chemical bath deposition was utilized to synthesize a FeOOH/Ni/NiO tri-component composite on Ti mesh (TM), during which Ni(Ac)2 and FeSO4 were used as feedstocks. XRD, Raman, XPS, SEM and TEM characterizations revealed nanosheet-assembled nanospheres composed of crystalline Ni coated by amorphous NiO, and amorphous FeOOH nanosheets successively deposited on the TM surface by electrodeposition and chemical bath deposition strategies. When serving as the OER electrocatalyst, the optimized FeOOH/Ni/NiO/TM presented a superb OER performance with an overpotential of 246 mV at 50 mA cm−2, outperforming FeOOH-5/NF (321 mV), Ni/NiO/TM (348 mV) and the recently reported electrocatalysts. Additionally, its OER performance had no obvious change with only 4.3% attenuation after working for 16 h at a constant current density. The high OER performance could be assigned to the interfacial electronic engineering due to the strong coupling effect between FeOOH and Ni/NO, which increased the intrinsic activity of the active sites, modulated the adsorption of the reactant and also enhanced the stability. The simple preparation strategy, low cost and high performance endow the self-supporting FeOOH/Ni/NiO/TM with potential applications in industrial water electrolysis for hydrogen production. [ABSTRACT FROM AUTHOR]

Transition metal phosphides (TMPs) have attracted extensive interest to catalyze the oxygen reduction reaction (ORR) and the oxygen evolution reaction (OER). However, the development of TMPs with high conductivity is a great challenge. Herein, we report hybrids of cobalt phosphide (CoP) and copper phosphide (CuP) strongly coupled with ZIF-67 derived carbon as bifunctional ORR/OER electrocatalysts (CoP/CuP@NC). The as-prepared CoP/CuP@NC catalysts exhibit delightful activity and stability toward the ORR (E1/2 = 0.86 V) and the OER (E10 = 1.61 V). Moreover, the assembled Zn-air battery exhibits a small charge-discharge voltage gap and excellent stability. These remarkable electrocatalytic capabilities stem from the combined impact of active CoP/CuP components and the structural framework derived from ZIF-derived materials. This work provides a meaningful strategy for constructing high-performance bifunctional electrocatalysts for commercial Zn-air batteries. [ABSTRACT FROM AUTHOR]

Plasma treatment as an effective strategy can simultaneously achieve surface modification and heteroatom doping. Here, an N/P-doped NiFeV oxide nanosheet catalyst (N/P-NiFeVO) constructed by Ar/PH3 plasma treatment is used to drive the oxygen evolution reaction (OER). The introduction of V species leads to the formation of an ultrathin ordered nanostructure and exposure of more active sites. Compared to the 2D NiFeV LDH, the prepared N/P-NiFeVO by plasma treatment possesses multiple-valence Fe, V and Ni species, which regulate the intrinsic electronic structure and enable a superior catalytic activity for the OER in alkaline media. Specifically, the N/P-NiFeVO only require an overpotential of 273 mV to drive the current density of 100 mA cm−2. What's more, the electrode can maintain a stable current density in a long-term oxygen evolution reaction (∼120 h) under alkaline conditions. This work provides new insight for the rational design of mixed metal oxides for OER electrocatalysts. [ABSTRACT FROM AUTHOR]

Heteroatomic anion doping represents a powerful approach for manipulating the electronic configuration of the active metal locus in electrocatalysts, resulting in enhanced multifunctional electrocatalytic properties in hydrogen/oxygen evolution reactions (HER/OER). Here, fluorine-tailored Ni2P-F3 nanosheets were synthesized and evaluated as a robust multifunctional electrocatalyst for HER, OER, and UOR. Our comprehensive experimental and theoretical investigations reveal that the anionic F effectively tailored the electronic states of the Ni2P-F3 nanosheets, resulting in an elevated d-band center and optimizing the sorption capacity of intermediates. In addition to thermodynamically and kinetically favoured redox reactions, F doping facilitates the reconstruction and generation of active γ-NiOOH. Resulting from the optimized electronic configuration and nanosheet architecture, outstanding catalytic activities are demonstrated by Ni2P-F3 with low overpotentials to reach 100 mA cm−2 for HER (177 mV) and OER (293 mV), surpassing Ni2P by 234 and 205 mV, respectively. Notably, 1.618 V is required for full-water-diversion to reach 10 mA cm−2, while 1.414 V is required with urea oxidation for 100 mA cm−2. [ABSTRACT FROM AUTHOR]

The Oxygen Evolution Reaction (OER) is crucial in various processes such as hydrogen production via water splitting. Several electrocatalysts, including metal oxides, have been evaluated to enhance the reaction efficiency. Zeolitic Imidazolate Framework-67 (ZIF-67) has been employed as a precursor to produce Co3O4, showing high OER activity. Additionally, the formation of composites with carbon-based materials improves the activity of these materials. Thus, this work focuses on synthesizing ZIF-67 and commercial activated carbon (AC) composites, which were used as precursors to obtain Co3O4/C electrocatalysts by calculating ZIF-67/CX (X = 10, 30, and 50, the mass percentage of AC). The obtained materials were thoroughly characterized by employing X-ray powder diffraction (XRD), confirming the cobalt oxide structure with a sphere-like morphology as observed in the TEM images. The presence of oxygen vacancies was confirmed by infrared spectroscopy and EPR measurements. The electrocatalytic performance in the OER was investigated by linear sweep voltammetry (LSV), which revealed an overpotential of 325 mV at 10 mA cm−2 and a Tafel slope value of 65.32 mV dec−1 for Co3O4/C10, superior in activity to several previously reported studies in the literature and electrochemical stability of up to 8 hours. The reduced value of charge transfer resistance, high double-layer capacitance, and the presence of Co3+ ions justify the superior performance of the Co3O4/C10 electrocatalyst. [ABSTRACT FROM AUTHOR]

Due to the slow kinetics and large overpotential of the oxygen evolution reaction (OER) in electrochemical water splitting, it is important to develop efficient and low-cost electrocatalysts for the OER. In this work, we used Co-PBA as the substrate, and induced the growth of NiFe-LDH on the surface of cubic Co-PBA by the hydrothermal method. The Co-PBA@NiFe-LDH electrocatalysts with a flower-like morphology and heterostructures were finally utilized to evaluate the OER performance. The results reveal that during the OER process, the flower-like structure allows Co-PBA@NiFe-LDH-30 to expose more active centers, and increases the contact area between the electrolyte and active sites. Meanwhile, benefiting from the synergistic effect of multi-metals and the heterostructure, Co-PBA@NiFe-LDH-30 demonstrated remarkable electrochemical performance with a lower overpotential of 253 mV at 10 mA cm−2 and a smaller Tafel slope of 54 mV dec−1. This design strategy provides a promising approach for the development of OER electrocatalysts in the future. [ABSTRACT FROM AUTHOR]

Two-dimensional transition metal sulfides possess high intrinsic catalytic activity for the oxygen evolution reaction (OER) during water splitting but are restricted by their low conductivity and unattractive stability in alkaline electrolytes. Herein, newly designed CoS2/MoS2 nanosheets with enriched heterointerfaces synthesized by the combination of hydrothermal and vulcanization methods showed great promise as a highly efficient OER electrocatalyst. Owing to the fast vulcanization process, some heterometallic sulfide nanoparticles get distributed on the nanosheets, thus forming a nanoparticle-nanosheet bridging structure. The rich heterogeneous interface between CoS2 and MoS2 regulates the electronic structure and provides sufficient electrochemical active sites, thus forming a fast channel conducive to electron transport and ensuring high OER activity. Besides, the rough heterostructured surface enhances hydrophilicity, which promotes the decomposition of H2O and decreases the energy barrier of intermediate reactions, leading to fast electrochemical kinetics. Benefiting from the structural merits, the optimized CoS2/MoS2-1 : 1 nanosheets exhibit a low overpotential of 283 mV at 10 mA cm−2, a small Tafel slope of 105.32 mV dec−1 and long-term durability for the OER. [ABSTRACT FROM AUTHOR]

Cellulose nanofiber (CNF) is an environmentally friendly material with a high specific surface area, which is an ideal candidate for cathode catalysts in zinc–air batteries (ZABs). However, untreated CNF-based carbon materials suffer from low intrinsic activity and fewer micro-mesopores. Herein, we developed an N-doped porous carbon aerogel from CNF and graphite phase carbon nitride (g-C3N4) via hydrothermal pretreatment and the carbonization process. The CNF can serve as the skeleton of the aerogel that leads to an interconnected porous structure, while g-C3N4 guarantees the in situ N doping and the formation of more nanopores. Therefore, the as-prepared carbon aerogel exhibits excellent oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) performances owing to the successful N doping with sufficient graphite-N and pyridine-N active sites (69.1%) and high specific surface areas (785.4 m2 g−1). The assembled ZABs with a carbon aerogel deliver a specific capacity of 790 mA h g−1 and an energy density of 945.6 W h kg−1 with a long-term stability over 100 h. This work opens a new avenue for the effective conversion of abundant biomass into bifunctional air cathodes for energy-related applications. [ABSTRACT FROM AUTHOR]

Medium entropy alloys, consisting of four elements in close to isotropic proportions, have attracted a great deal of attention because of their unique properties (excellent strength, corrosion resistance, etc.). Here, we present a series of quaternary medium entropy alloy FeCoNiW electrocatalysts loaded onto nitrogen-doped carbon (NC) skeletons. The prepared medium entropy alloy catalysts have excellent OER catalytic activity and stability. In alkaline media, the FeCoNiW-NC electrocatalysts annealed at 350 °C were able to achieve an overpotential as low as 225 mV at a current density of 10 mA cm−2, which is 55 mV lower than that of the commercial RuO2, while it has a smaller Tafel slope of 54 mV dec−1. The introduction of W leads to a change in the electronic structure of the FeCoNi alloy and increases the specific surface area of the catalyst, exhibiting excellent performance. This work contributes to the exploration of OER catalysts by opening new avenues for the design of efficient and economical OER electrocatalysts. [ABSTRACT FROM AUTHOR]

Oxygen evolution reaction (OER) electrocatalysts are frequently made from noble metal-based oxides like ruthenium/iridium oxides. However, because of their scarcity and high price, researchers are now focusing on creating innovative OER catalysts based on affordable transition metals that have improved electrical conductivity and accessibility to active sites. Metal–organic frameworks (MOFs), a unique class of inorganic materials with excellent physical and chemical properties, have witnessed significant progress in promising green energy systems. In this work, a novel mixed-ligand metal–organic framework [Co(μ-1κN,2κN′-BDP)(μ3-1κoo′,2κo′′2κo′′′-BTC)]n·nH2O (BDP = boron-dipyrromethene or BODIPY; BTC = benzene tricarboxylate) denoted as CoBDPMOF has been synthesized, and its composites with different carbon materials have been designed. Compared to the pristine MOF, the composites showed enhanced electrocatalytic activity toward the oxygen evolution reaction (OER) in alkaline media. In addition, the CoBDPMOF with activated carbon showed the highest OER performance with a low Tafel slope (82 mV dec−1) and the highest j600 (59.8 mA cm−2), outperforming noble metal IrO2, the OER benchmark electrocatalyst. This study presents new insights into the design and application of CoBDPMOF-based materials for energy conversion and suggests promising avenues for further research and development in electrocatalysis. [ABSTRACT FROM AUTHOR]

Exploring bifunctional electrocatalysts for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR), which combine the features of effective electrocatalytic activity, high electrical conductivity, and superior stability, remains a significant challenge for rechargeable Zn–air batteries (ZABs). Herein, we report a material, selenium (Se)-doped CoSe2 embedded in carbon nanofibers (CNFs) (denoted as Se–CoSe2/CNFs), which was synthesized as a bifunctional electrocatalyst for ZABs via electrospinning combined with in situ growth of Zeolitic Imidazolate Framework-67 strategy, followed by carbonization and a facile selenization process. The as-synthesized Se–CoSe2/CNF electrode exhibits satisfactory electrochemical performance in an alkaline environment with a low overpotential of 325 mV at 10 mA cm−2 toward OER and a half-wave potential of 0.80 V for ORR. Remarkably, the Se–CoSe2/CNF catalyst-based ZAB shows a peak power density of 149.4 mW cm−2 and the voltage window barely changes after 180 h of cycling at 5 mA cm−2, which proves its great potential application for advanced bifunctional electrocatalysis in ZABs. [ABSTRACT FROM AUTHOR]

The design of low-cost and high-performance bifunctional catalysts for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) is of great significance for overall water splitting. Herein, RuNi single atom alloy (SAA) decorated on reduced graphene oxide (RuNi@rGO) was synthesized by a facile strategy for use as a bifunctional HER/OER catalyst. The as-obtained RuNi@rGO catalyst exhibits outstanding electrocatalytic activities with an ultralow overpotential for the HER (15 mV) and the OER (240 mV) at a current density of 10 mA cm−2. Density functional theory (DFT) calculations demonstrate that the introduction of Ru single atoms can evidently change the electron distribution and coordination environment around Ni, and reduce the intermediate's adsorption free energy of RuNi@rGO, thus facilitating the HER/OER catalytic rate. Moreover, when used as the cathode and anode of a two-electrode system, the RuNi@rGO-based water splitting device exhibits a low potential of 1.52 V at a current density of 10 mA cm−2, as well as a high faradaic efficiency almost up to 100%, making RuNi@rGO bifunctional electrocatalysts attractive for energy storage and conversion. [ABSTRACT FROM AUTHOR]

Proton exchange membrane water electrolysis (PEMWE) can be coupled with renewable energy power generation technology and is considered to be a highly promising hydrogen production technology. However, the acidic electrolyte environment, as well as the numerous sulfonic acid groups on the proton exchange membrane surface, can seriously corrode the oxygen evolution reaction (OER) catalyst and even cause deactivation. To develop an efficient acidic OER catalyst, the IrOx/WO3 heterostructure OER catalyst was prepared by a hydrothermal-calcination method. The coordination environment of IrOx was regulated through the electronic rearrangement effect, improving the OER activity and stability of the catalyst in acidic media. The prepared IrOx/WO3 exhibits excellent OER activity in 0.5 M H2SO4, with an overpotential of only 260 mV to achieve a current density of 10 mA cm−2 and a mass activity of 176.8 A gIr−1. It can stably operate for over 12 hours at a current density of j = 10 mA cm−2. [ABSTRACT FROM AUTHOR]

Developing efficient and economical catalysts is essential for water splitting. The application of MOF catalysts in water splitting is limited by poor conductivity; however, the introduction of conductive TMS could enhance their activity. Herein, novel composite Fe9S10/Fe-MOF/NF-2 was constructed by introducing dendritic Fe9S10 onto the surface of a 2D ultrathin Fe-MOF. Composite catalysts elaborately utilize the structural and chemical advantages of MOF and TMS while improving the deficiencies of monomers through the combination. Owing to the optimal structure, the hybrid catalyst Fe9S10/Fe-MOF/NF-2 displayed better catalytic performance than bare Fe-MOFs and Fe9S10, with low overpotentials of 202 and 216 mV at 10 mA cm−2 in alkaline solution and simulated seawater, respectively. This work provides an innovative approach to modify MOFs as electrocatalysts for OER. [ABSTRACT FROM AUTHOR]

The rational design of earth-abundant and efficient electrocatalysts to replace precious metal-based materials is highly anticipated for overall water splitting. Herein, NiCo2O4 electrocatalysts with different Fe doping amounts (Fex-NCO, x = 1, 2, 3) were synthesized by a low-temperature chemical method. It was interesting to find that the doping of Fe induced the formation of NiCo2O4 nanotube arrays by modulating the Fe content. The Fe3-NCO electrode with a nanotube structure and rich oxygen vacancies exhibited exceptional electrocatalytic activities for the hydrogen evolution reaction (97 mV, 10 mA cm−2) and oxygen evolution reaction (188.4 mV, 10 mA cm−2). DFT calculations revealed that Fe promoted the modulation of the electronic structure, which played a crucial role in optimizing the reaction intermediates and altered the energy level of the d band center, and as a result, enhanced the water dissociation ability. Additionally, a low cell voltage of 1.56 V (10 mA cm−2) was realized for water splitting based on an as-fabricated Fe-doped NiCo2O4 nanotube array bifunctional electrode. [ABSTRACT FROM AUTHOR]

The rational design of high-efficiency electrocatalysts for application in water oxidation in alkaline media remains a great challenge. In this paper, Ni3+-rich nanograss-like Mo-doped Ni3S2/NiS/VS arrays grown on nickel foam (denoted as Mo-NiVS@NF) have been successfully constructed through a hydro/solvothermal method. Interestingly, Mo-NiVS@NF exhibits superior catalytic OER performance, needing an overpotential of 217 mV to drive a current density of 10 mA cm−2, outperforming most previously reported NiS-based electrocatalysts. The result indicates that the Ni3+-rich active sites caused by the modulation of the electronic structure environment via the introduction of V and high-valency Mo play an important role in the high activity for the OER. Moreover, this catalyst shows high long-term electrochemical durability. [ABSTRACT FROM AUTHOR]

It is highly desirable for porous coordination polymers (PCPs), including metal–organic frameworks (MOFs) and Prussian blue analogues (PBAs), to retain their intrinsic characteristics in electrocatalysis, instead of being used as precursors or templates for further total conversion to other compounds via high-temperature calcination. Here, a S-treated two-dimensional (2D) CoFe bimetallic PBA grown on carbon fiber paper (CFP) (named S-CoFe-PBA/CFP) is assembled and applied as a highly efficient oxygen evolution reaction (OER) electrocatalyst in 1 M KOH. The resultant S-CoFe-PBA/CFP demonstrates significantly improved OER catalytic activity; overpotentials of only 235, 259, and 272 mV are needed to drive current densities of 10, 50, and 100 mA cm−2, respectively, with a super low Tafel slope of 35.2 mV dec−1. Even more noteworthy, a current density of 90 mA cm−2 can be achieved when a potential of 1.5 V vs. RHE is applied, which is 6.4 times higher than that of commercial Ir/C in the same environment. The outstanding electrocatalytic performance can be ascribed to two reasons caused by the S-treatment process. On one hand, H+ from intermediates of *OH and *OOH can be captured by –SOx distributed on the surface of the catalyst, thus accelerating the breaking of O–H; on the other hand, partial phase transformation of CoFe-PBA leads to the in situ formation of amorphous CoSx nanogauze on the surface, and the resultant electronic interactions between the two phases contribute much to the improvement of charge transfer and adsorption for OER intermediates. This work provides a new avenue for the design of highly efficient PCP-based OER electrocatalysts. [ABSTRACT FROM AUTHOR]

Herein, novel and efficient IF-supported NiCu (NiCu/IF) and NiMn (NiMn/IF) electrocatalysts are successfully deposited on iron foam (IF) via electrolysis of spent cupronickel (SCN), with outstanding performance for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER) in an alkaline solution, respectively. The physical and electrochemical characterization results demonstrate that the catalysts possess a large active surface area, remarkable performance, and excellent durability. [ABSTRACT FROM AUTHOR]

Non-precious metal sulfide bifunctional electrocatalysts with high efficiency for both the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) hold great promises in the overall water splitting field. In this study, a hybrid bifunctional catalyst CuCo2S4@CoS2 was fabricated by synthesizing CuCo2S4 with ZIF-67 as a template and externally modified with CoS2. The CuCo2S4@CoS2 catalyst exhibited improved alkaline oxygen evolution and hydrogen evolution activities with the overpotentials of 261 mV@10 mA cm−2 and 153 mV@10 mA cm−2, respectively. The three-dimensional interconnected nanosheet stacked structure, high conductivity of CuCo2S4, and strong interfacial interactions endowed the hybrid CuCo2S4@CoS2 catalyst with enhanced HER and OER performance due to rich electrocatalytic active sites, fast diffusion pathways for reactants and intermediates, and reduced kinetic barriers. An electrolytic cell using CuCo2S4@CoS2 as both cathode and anode required a cell voltage of 1.61 V, along with good long-term stability, to deliver a current of 10 mA cm−2, suggesting a promising bifunctional electrocatalyst for overall water splitting. [ABSTRACT FROM AUTHOR]

The reconstruction of pre-catalysts is a powerful strategy to achieve efficient oxygen evolution reaction (OER) electrocatalysts under alkaline conditions. Herein, NiFe based layered double hydroxides (LDHs) intercalated with citrate anions (CA) are constructed as pre-catalysts via a one-pot hydrothermal method. The CA intercalation exhibits an obvious promotion effect on structure reconstruction, which improves the OER performance. Benefiting from promoted structure reconstruction, a low overpotential of 241 mV at 50 mA cm−2, and an ultralow Tafel slope of 36.4 mV dec−1 can be achieved with robust durability (over 82 h at 50 mA cm−2), demonstrating better OER performance than that of NiFe LDH without CA intercalation. The addition of CA into the electrolyte could enhance the OER activity, indicating surface-adsorbed CA promotes the OER activity of NiFe LDHs. Our findings provide new insight into the effect of anions on catalyst reconstruction and provide a new way of developing efficient electrocatalysts. [ABSTRACT FROM AUTHOR]

The slow kinetics of the oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) in air cathodes severely limit the development of reversible zinc–air batteries. Thus, bifunctional oxygen catalysts with excellent electrocatalytic activity and durability for both the oxygen reduction and oxygen evolution reactions (ORR/OER) are keys to achieving long-term rechargeable zinc–air batteries. However, it remains challenging to further improve the performance by adding more active sites. To address this, a series of nitrogen-doped carbon (CN) with NiCo alloys has been synthesized by pyrolyzing a simple bimetal zeolitic-imidazolate framework (ZIF) and then evenly loaded with metallic Ru nanoparticles, resulting in Ru–NiCo/NC samples. Benefiting from the large pore volume and high activities, the Ru–NiCo/NC electrocatalysts exhibit higher ORR (E1/2 = 0.84 V) and OER performance with an overpotential of 342 mV at 10 mA cm−2, along with superior cycle stability. More significantly, when employed in rechargeable zinc–air batteries, Ru–NiCo/NC catalysts demonstrate a high power density of 132.3 mW cm−2, significantly outperforming Pt and Ru-based zinc–air batteries. Additionally, DFT (density functional theory) results indicate that the addition of Ru leads to a downshift of the d-band center from the Fermi level, which benefits the reduction of energy barriers and enhances the desorption of O-containing intermediates. This work provides a feasible strategy for developing efficient and high-performance bifunctional electrocatalysts. [ABSTRACT FROM AUTHOR]

Designing highly-efficient, cost-effective, and stable electrocatalysts for water splitting is essential to producing green hydrogen. In this work, a nanoflower quaternary heterostructured Ni(NO3)2(OH)4/Ni(OH)2/Ni3S2/NiFe-LDH electrocatalyst is successfully synthesized by two-step hydrothermal reactions. The sulfur in the electrocatalyst induces higher valence state metal atoms as active sites to accelerate the formation of O2. As expected, benefiting from the unique structural features and solid electronic interactions, Ni(NO3)2(OH)4/Ni(OH)2/Ni3S2/NiFe-LDH exhibits remarkable oxygen evolution reaction performance with a low overpotential of 223 mV at a current density of 100 mA cm−2, a slight Tafel slope of 65.4 mV dec−1, and outstanding stability in alkaline media. Attractively, using Ni(NO3)2(OH)4/Ni(OH)2/Ni3S2/NiFe-LDH as both a cathode and an anode, the alkaline electrolyzer delivers a current density of 10 mA cm−2 only at a cell voltage of 1.67 V, accompanied by superior durability. This work provides a facile method for the rational design of high-performance quaternary electrocatalysts. [ABSTRACT FROM AUTHOR]

The development and optimization of electrocatalysts is one of the key points to reduce the energy barrier of electrocatalytic water splitting and improve the kinetics of electrocatalytic reactions. It is necessary to develop low-cost, high-performance electrocatalysts with large-scale application prospects. In order to solve this problem, hybrid structured ZnCo2O4@Co3O4 nanowires are successfully synthesized through hydrothermal synthesis and electrodeposition. As electrocatalysts for water splitting, ZnCo2O4@Co3O4 can reach a current density of 50 mA cm−2 at an overpotential of 278 mV for the OER and 166 mV@−10 mA cm−2 for the HER, which could be higher than that of single ZnCo2O4 and Co3O4. At the same time, ZnCo2O4@Co3O4 samples also exhibit a cell voltage of 1.67 V at a high current density of 50 mA cm−2 and superior durability for 50 h. The fabricated product also showcases a specific capacitance of 1316 F g−1 at 1 A g−1. Additionally, the assembled device attains a maximum energy density of 47.3 W h kg−1 at a power density of 1126 W kg−1. Furthermore, density functional theory (DFT) calculation further confirms that the heterostructure can significantly promote Gibbs free energy for hydrogen adsorption. And the significant increase in the density of total states (DOS) also enhances the catalytic activity for the HER. [ABSTRACT FROM AUTHOR]

Design and exploration of highly efficient oxygen evolution reaction (OER) electrocatalysts is an urgent task to realize the future ideals of the hydrogen economy. Non-precious metal-based nanomaterials have been widely developed as electrocatalysts to expedite reaction rate and solve the low efficiency problem of the OER. A novel nanocatalyst, NiSe-CoFe LDH, in which lamellar CoFe LDH covered the surface of NiSe, was fabricated through a simple chemical vapor deposition and hydrothermal method. The specific heterogeneous three-dimensional structure of NiSe-CoFe LDH showed impressive electrochemical performance towards the OER. When used as an OER electrocatalyst, the NiSe-CoFe LDH nanomaterial afforded an overpotential of 228 mV to attain 10 mA cm−2. Furthermore, NiSe-CoFe LDH also maintained excellent stability with negligible activity after chronopotentiometry measurement for 60 hours. [ABSTRACT FROM AUTHOR]

It is imperative to develop bifunctional electrocatalysts with good activity and stability for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). In this paper, a hierarchical NiCo2O4/Ni3S2 hybrid is synthesized by direct growth on nickel foam (NF) using co-precipitation and sulfuration as a general two-step method. When the NiCo2O4/Ni3S2/NF material is used as an electrode, it displays high activity and perfect stability for OER. A low overpotential of only 360 mV is obtained at 40 mA cm−2, comparable to the benchmark of IrO2 electrodes (330 mV overpotential at 40 mA cm−2), benefiting from the particular hybrid structure of NiCo2O4/Ni3S2/NF with large surface area and fast electron transfer. In addition, the NiCo2O4/Ni3S2/NF sample also reveals a superior elevated HER activity compared to NiCo2O4/NF and NF catalysts individually, for which a low overpotential of only 143 mV is obtained at 10 mA cm−2. Beyond that, NiCo2O4/Ni3S2/NF is also used as a bifunctional water splitting catalyst, for which a very low cell voltage of 1.58 V is acquired at 10 mA cm−2 in 1.0 M KOH. The results reveal that oxide/sulfide-based materials can be used as a perfect electrode candidate and afford the advantage of the synergy strategy, which opens a new route toward desired water splitting electrochemical devices of high activity and environmentally friendly electrode materials. [ABSTRACT FROM AUTHOR]

The oxygen evolution reaction (OER) is a promising energy conversion system, which has been studied a lot in recent years. However, owing to the high overpotential and sluggish kinetics of the OER, an efficient electrocatalyst is necessary to lower the overpotential and accelerate the reaction. In this paper, we report a cobalt phosphide (CoP)/carbon dots (CDs) composite as an electrocatalyst for the OER for the first time. A facile two-step method was used to synthesize the CoP/CDs composite and the concentration of CDs in the composite was further regulated. The experimental results show that when the amount of CDs in the composite is 6 mg (28.79 wt%C), the obtained CoP/CDs composite exhibits optimal electrocatalytic activity (with an overpotential of 400 mV in 1 M KOH at a current density of 10 mA cm−2) and high stability towards the OER. The good electrocatalytic activity of the composite is attributed to the small size of CoP and CDs and rapid electron transfer of CDs. [ABSTRACT FROM AUTHOR]

Hydrogen obtained through the electrolysis of water is a potential solution to the growing demand of human society for energy. In addition, water electrolysis generates less environmental pollution than fossil energy sources. However, the preparation of highly active and low-cost electrocatalysts remains a key challenge. Here, we report a facile and inexpensive method to prepare palladium nanoparticles (Pd NPs) supported on aminated (–NH2) metal–organic frameworks (MOF). The obtained electrocatalyst (Pd@Uio-66-NH2) exhibits excellent electrocatalytic performance for the hydrogen evolution reaction (HER), featuring an ultralow overpotential (34 mV at 10 mA cm−2), small Tafel slope (41 mV dec−1), and superior stability in acid electrolyte. Systematic characterization demonstrated that –NH2 can effectively stabilize palladium acetate as the Lewis base. Meanwhile, the strong interaction between the lone pair electrons and the d-orbital ensures that the Pd atoms are uniformly distributed in the MOF material, inhibiting the agglomeration of metal NPs in the reaction. This strategy provides an avenue to prepare inexpensive and highly active catalysts for HER in acidic media. [ABSTRACT FROM AUTHOR]

Rational construction of low-cost and high-performance electrocatalysts for water splitting is crucial for the advancement of renewable hydrogen fuel. Hybridizing heterojunctions or noble metals is one typical strategy used to boost the electrocatalytic performance for either the oxygen evolution reaction (OER) or hydrogen evolution reaction (HER). Here, low-content CeOx (3.74 wt%) is introduced into Ni3Fe nanoparticle-encapsulated carbon nanotubes (Ni3Fe@CNTs/CeOx), with both the OER and HER activities boosted, as a bifunctional electrocatalyst for overall water splitting. The composite is derived by pyrolyzing a mixture of melamine/ternary NiFeCe-layered double hydroxide. The composite electrocatalyst requires low overpotentials of 195 and 125 mV at 10 mA cm−2 in 1.0 M KOH, respectively, which are superior to those of Ni3Fe@CNTs/NF (313 and 139 mV) and CeOx/NF (345 and 129 mV), and in particular, OER overpotentials of 320 and 370 mV at 50 and 100 mA cm−2, respectively. Moreover, the composite-assembled electrolyzer for overall water splitting requires a current density of 10 mA cm−2 at a decent cell voltage of 1.641 V. Furthermore, the enhancement is elucidated by the synergistic effect: the dual role of CeOx in boosting the OER and HER, the highly conductive carbonaceous CNTs, large electrochemically active surface area and low charge-transfer resistance. The results can offer an effective route for designing and preparing low-cost and high-efficiency electrocatalysts for electrocatalytic water splitting. [ABSTRACT FROM AUTHOR]

Noble-metal free and durable electrocatalysts with high catalytic activity towards oxygen reduction and evolution reactions are crucial to achieving a high-performance rechargeable Zn–air battery. Herein, a bifunctional electrocatalyst with a dual-protected structure has been successfully fabricated. The obtained materials, i.e., Co@PPD_rGO, showed good ORR and OER performances. As a proof-of-concept application, Co@PPD_rGO was employed in the rechargeable Zn–air battery. It showed lower charge and discharge voltages compared with Pt/C under the same conditions. It should be noted that a voltage degradation is observed on Co@PPD_rGO after 350 cycles. These good performances originate from its 3D porous structure, dual protection from PPD and rGO, high specific surface area, small charge transfer resistance, the N/Co-doping effect and synergistic interaction between Co@PPD and rGO. This strategy reported herein may pave a way for designing efficient electrocatalysts toward Zn–air batteries using other dual-protected MOF materials. [ABSTRACT FROM AUTHOR]

Efficient and robust electrocatalysts towards the oxygen evolution reaction (OER) are highly desirable in electrochemical systems for applications including water splitting and metal-air batteries. Herein, we report the preparation of an amorphous FeCoNiMnCr high-entropy alloy (HEA) on the surface of flower-like 2H-MoS2 (FeCoNiMnCr@MoS2) as a highly efficient electrocatalyst for the OER. The flower-like 2H-MoS2 is prepared on the flexible conductive carbon cloth (MoS2-CC) via a hydrothermal method, and subsequently the amorphous FeCoNiMnCr HEA is loaded on the surface of 2H-MoS2via an electrodeposition method to form FeCoNiMnCr@MoS2-CC electrocatalysts. Owing to the unique microstructure of 2H-MoS2 and abundant active sites of FeCoNiMnCr HEA, the FeCoNiMnCr@MoS2-CC electrocatalysts exhibit significantly improved OER electrocatalytic performances with a low overpotential of 210 mV at a current density of 10 mA cm−2 and a small Tafel slope of 40.3 mV dec−1 in 1.0 M KOH solution. Moreover, it shows excellent stability for OER electrocatalysis with the potential barely increased for at least 50 h. This work sheds light on the development of highly efficient OER electrocatalysts based on HEAs. [ABSTRACT FROM AUTHOR]

The electrochemical decomposition of water plays a critical role in green and sustainable energy. However, the development of efficient and low-cost non-noble metal catalysts to overcome the high potential of the anodic oxygen evolution reaction (OER) is still challenging. In this work, electrocatalysts with high OER activity were obtained by doping Co/Fe bimetals into Ni3S2 (CF-NS) via a simple single-step hydrothermal method by adjusting the doping ratio of bimetals. A series of characterization studies revealed that the introduction of a Co/Fe co-dopant increased the number of active sites and improved the electroconductibility, while optimizing the electronic structure of Ni3S2. Meanwhile, Fe-induced high valence Ni contributed to the production of an OER active phase NiOOH. The unique dendritic crystal morphology facilitated the disclosure of the active sites and the expansion of mass transfer channels. The optimized sample required a low overpotential of 146 mV to obtain a current density of 10 mA cm−2 in 1.0 M KOH solution. The optimized sample also operated stably for at least 86 h. In sum, the proposed method looks very promising for designing efficient, stable, and low-cost non-precious metal catalysts with high conductivity and multiple active sites, useful for future synthesis of transition metal sulfide catalysts. [ABSTRACT FROM AUTHOR]

The key step for hydrogen production through water electrolysis is the development of highly efficient and inexpensive oxygen evolution reaction (OER) catalysts. In this work, we report the successful synthesis of a nanostructured Fe-doped cobalt-based telluride (Fe-doped CoTe2) catalyst on Co foam by a simple one-step hydrothermal synthesis method, which shows excellent OER performance. The influences of Fe doping amounts and reaction temperatures on the morphology, structure, composition, and the OER performance of cobalt-based tellurides have been systematically studied. The optimal sample Co@0.3 g FeCoTe2-200 exhibits a low overpotential of 300 mV at a current density of 10 mA cm−2, and a small Tafel slope of 36.99 mV dec−1, outperforming the undoped cobalt telluride catalysts (Co@CoTe2-200). The Co@0.3 g FeCoTe2-200 electrode also reveals a small overpotential degradation of around 26 mV after an 18-hour continuous OER process. These results unambiguously confirm that Fe doping helps improve the OER activity and long-term catalytic stability. The superior performance of nanostructured Fe-doped CoTe2 can be attributed to the porous structure and the synergistic effect of Co and Fe elements. This study provides a new approach for the preparation of bimetallic telluride catalysts with enhanced OER performance, and Fe-doped CoTe2 holds substantial promise for use as a high-efficiency, cost-effective catalyst for alkaline water electrolysis. [ABSTRACT FROM AUTHOR]

Designing efficient non-precious electrocatalysts to boost water splitting for green energy is a worthy and crucial objective, while it is still an enormous challenge. Herein, single-phase Ni5P4 ultrathin porous nanosheets grown on Ni foam constructed using the three-dimensional single-phase hierarchical nanoflower Ni5P4 (defined as 3D SHF-Ni5P4) were assembled via a simple hydrothermal and phosphating process in an enclosed space. Benefitting from the special structure and morphology of 3D hierarchical porous ultrathin nanosheets, as well as their increasing number of active sites, the 3D SHF-Ni5P4 exhibited outstanding performance with low overpotentials of 180 mV and 106 mV for achieving a current density of 10 mA cm−2 in 1 M KOH toward both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER), and the Tafel slopes were 54 mV dec−1 and 79 mV dec−1, respectively. The overall water separation setup, using 3D SHF-Ni5P4 as both the cathode and anode in 1.0 M KOH, achieved a current density of 10 mA cm−2 at a low voltage of 1.47 V, which surpasses that of the commercial Pt C/NF‖‖RuO2/NF (1.52 V). This work highlights an achievable strategy for the controllable fabrication of a 3D single-phase hierarchical nanoflower Ni5P4 electrocatalyst, constructed with ultrathin porous nanosheets containing plenty of active sites. It provided new insights into developing cost-effective single-phase electrocatalysts towards green energy by water splitting. [ABSTRACT FROM AUTHOR]

BiVO4 possesses a suitable band gap for photoelectrochemical (PEC) water splitting to produce hydrogen; however, the performance of BiVO4 is limited by several adverse factors. The bulk charge recombination and the slow surface water oxidation reaction of BiVO4 are main unfavorable factors. In view of these disadvantages, an Fe–Bi electrocatalyst is loaded on BiVO4 to improve the PEC performance of BiVO4. After modification, the onset potential of BiVO4 shifts negatively by 60 mV, and the saturated photocurrent is greatly increased. Systematic studies demonstrate that the Fe–Bi electrocatalyst not only enhances the bulk charge separation, but also accelerates the surface water oxidation rate of BiVO4 and greatly reduces the resistance of the reaction interface. [ABSTRACT FROM AUTHOR]

Designing highly efficient non-precious metal electrocatalysts to facilitate overall water decomposition is critical and highly desirable, but still challenging. In this study, we synthesized ZIF-67@POM nanomaterials by doping H3PMo12O40 in ZIF-67. The molybdenum-doped carbon matrix can effectively reduce CoP agglomeration, which is conducive to improving the specific surface area and active sites of the catalyst. The doping of Mo also optimizes the electronic structure of Mo-CoP-100 and improves its electrocatalytic activity. Compared with CoP derived from pristine ZIF-67, the optimal Mo-CoP-100 exhibits significantly enhanced oxygen evolution reaction (OER) catalytic activity with an almost constant overpotential of 290 mV to maintain a stable current density of 10 mA cm−2 in alkaline media for at least 100 h. Furthermore, compared with traditional precious metal-free OER electrocatalysts, the Mo-CoP catalysts prepared in this work have high specific surface area, rich surface-active sites, good cycling stability and high diffusion efficiency. [ABSTRACT FROM AUTHOR]

Electrocatalytic O2 conversion and water-splitting hold great promise to enable the chemicals–electricity inter-transition in many renewable-energy initiatives. Enhancing the kinetics of the oxygen reduction reaction (ORR) is challenging. Here, we present that Zn3(VO4)2/Ni(OH)2/rGO (reduced graphene oxide) nanosheet arrays-a Zn3(VO4)2/Ni(OH)2 composite in the form of nanometre-thick nanosheets on an rGO substrate-serve as an efficient and stable electrocatalyst for the ORR in alkaline electrolytes. The thin-sheet structure and smaller free energy of Zn3(VO4)2/Ni(OH)2, as well as the excellent conductivity of the rGO substrate, enable a large electrochemically-active surface area and a high electron transport, contributing to the superior electrocatalytic oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER). Furthermore, Zn3(VO4)2/Ni(OH)2/rGO and Zn3(VO4)2/Ni(OH)2 samples exhibit remarkable long-term water-splitting stability of 48 h. Density functional theory (DFT) calculations reveal the optimized intermediate affinity ability at the Ni(OH)2 side, due to electrons transferring from Ni(OH)2 to Zn3(VO4)2. Additionally, the higher hybridization degree of density of states (DOS) boosts electron transfer in the electrocatalytic process. More broadly, this work provides new inspiration for the construction of a novel noble metal-free electrocatalyst that could show great promise in energy electrocatalysis. [ABSTRACT FROM AUTHOR]