Search

Developing high-efficiency electrocatalysts for the hydrogen evolution reaction (HER) is of great importance. In this paper, dendrite-free Ni–Cu catalysts were synthesised via one-step pulse electrodeposition under a weak magnetic field (0.5 T). Regardless of the direction of the magnetic field, the ions were affected by the magnetohydrodynamic (MHD) effect, which greatly promoted the mass transfer and dispersion uniformity, and suppressed the uncontrollable agglomeration by electrodeposition. It was found that the nucleation mechanism changed from progressive nucleation under a 0 T magnetic field to instantaneous nucleation under a 0.5 T magnetic field. Large-scale (325 nm, 0 T) dendrite growth on the single-sided plane was successfully suppressed, and replaced by smaller (90 nm, 0.5 T) and uniformly distributed cluster growth around the carbon paper. In addition, the (111) plane was strengthened by the magnetic field. Electrochemical analysis showed that the Ni–Cu catalysts exposed more surface area and exhibited greatly enhanced catalytic activity, which only needed −57.3 mV to deliver the current density of 10 mA cm−2 with a small Tafel slope of 99.4 mV dec−1 in 1 M KOH. Overall, magneto-electrodeposition, especially under weak magnetic field conditions, provides great promise for the preparation of HER catalysts. [ABSTRACT FROM AUTHOR]

The rational design of high-efficiency electrocatalysts for application in water oxidation in alkaline media remains a great challenge. In this paper, Ni3+-rich nanograss-like Mo-doped Ni3S2/NiS/VS arrays grown on nickel foam (denoted as Mo-NiVS@NF) have been successfully constructed through a hydro/solvothermal method. Interestingly, Mo-NiVS@NF exhibits superior catalytic OER performance, needing an overpotential of 217 mV to drive a current density of 10 mA cm−2, outperforming most previously reported NiS-based electrocatalysts. The result indicates that the Ni3+-rich active sites caused by the modulation of the electronic structure environment via the introduction of V and high-valency Mo play an important role in the high activity for the OER. Moreover, this catalyst shows high long-term electrochemical durability. [ABSTRACT FROM AUTHOR]

Electrocatalytic water splitting, which is driven by renewable energy input to produce oxygen, has been widely regarded as a promising strategy in the future energy portfolio. The two-dimensional structure based on CoOOH nanosheets is easy to handle in the preparation process, low in cost, and has a small overpotential during water decomposition. Therefore, CoOOH two-dimensional materials have been widely used as electrocatalysts for the oxygen evolution reaction (OER). In this paper, we summarize the application of two-dimensional CoOOH nanosheets in the field of oxygen production from electrocatalytic water splitting. First, the different preparation methods of two-dimensional CoOOH nanosheets are briefly introduced. The structure–activity relationship of the two-dimensional CoOOH catalyst was analyzed from different viewpoints, such as doping, defects, etc. Finally, different catalytic mechanisms of CoOOH-based catalysts are discussed, and studies at the density functional theory (DFT) level are also provided to support the above mechanisms. To improve the readability of this review, a concise overview at the end of each section is given to illustrate some of the characteristics and trends of the studies in the corresponding part. The opportunities and challenges of two-dimensional CoOOH as an electrocatalyst in the future are summarized in the Conclusion section. This work will provide new insights and perspectives to the readers to understand the role of CoOOH nanosheets in the OER process. [ABSTRACT FROM AUTHOR]

It is highly desirable for porous coordination polymers (PCPs), including metal–organic frameworks (MOFs) and Prussian blue analogues (PBAs), to retain their intrinsic characteristics in electrocatalysis, instead of being used as precursors or templates for further total conversion to other compounds via high-temperature calcination. Here, a S-treated two-dimensional (2D) CoFe bimetallic PBA grown on carbon fiber paper (CFP) (named S-CoFe-PBA/CFP) is assembled and applied as a highly efficient oxygen evolution reaction (OER) electrocatalyst in 1 M KOH. The resultant S-CoFe-PBA/CFP demonstrates significantly improved OER catalytic activity; overpotentials of only 235, 259, and 272 mV are needed to drive current densities of 10, 50, and 100 mA cm−2, respectively, with a super low Tafel slope of 35.2 mV dec−1. Even more noteworthy, a current density of 90 mA cm−2 can be achieved when a potential of 1.5 V vs. RHE is applied, which is 6.4 times higher than that of commercial Ir/C in the same environment. The outstanding electrocatalytic performance can be ascribed to two reasons caused by the S-treatment process. On one hand, H+ from intermediates of *OH and *OOH can be captured by –SOx distributed on the surface of the catalyst, thus accelerating the breaking of O–H; on the other hand, partial phase transformation of CoFe-PBA leads to the in situ formation of amorphous CoSx nanogauze on the surface, and the resultant electronic interactions between the two phases contribute much to the improvement of charge transfer and adsorption for OER intermediates. This work provides a new avenue for the design of highly efficient PCP-based OER electrocatalysts. [ABSTRACT FROM AUTHOR]

As a dual-functional catalyst for the hydrogen evolution reaction (HER) and the oxygen evolution reaction (OER), Ru clusters have great potential, but there are certain difficulties regarding their stability on the substrate and the tunability of their electronic environment. Here, the S doped graphited biochar aerogel electrocatalyst was designed and synthesized using terrestrial lignin and algal polysaccharide as a carbon substrate. The Ru clusters were anchored on the S-doped carbon aerogel (P-Ru/SC) by carefully designing the Ru-S bond via a novel plasma assisted high temperature carbonization treatment. The optimized P-Ru/SC-2 catalyst exhibits excellent electrocatalytic performance for the HER and OER, achieving ultra-small overpotentials of 119.6 mV and 193.4 mV at 10 mA cm-2. The dual-electrode requires only 1.47 V to reach 10 mA cm-2. It is worth noting that a large number of S sites on graphited carbon can strongly interact with the Ru clusters, significantly improving the catalytic activity and stability for the HER and OER. [ABSTRACT FROM AUTHOR]