Search

Metal halide perovskites, such as iodine methylamine lead (MAPbI3), have received extensive attention in the field of photocatalytic decomposition of HI for hydrogen evolution, due to their excellent photoelectric properties. In this paper, a new MAPbI3-based composite, MoC/MAPbI3, was synthesized. The results show that 15 wt% MoC/MAPbI3 has the best hydrogen production performance (38.4 μmol h−1), which is approximately 24-times that of pure MAPbI3 (1.61 μmol h−1). With the extension of the catalytic time, the hydrogen production rate of MoC/MAPbI3 reached 165.3 μmol h−1 after 16 h due to the effective separation and transfer of charge carriers between MoC and MAPbI3, showing excellent hydrogen evolution rate performance under visible light. In addition, the cycling stability of MoC/MAPbI3 did not decrease in multiple 4 h cycle tests. This study used the non-precious metal promoter MoC to modify MAPbI3, and provides a new idea for the synthesis of efficient MAPbI3-based composite catalysts. [ABSTRACT FROM AUTHOR]

As a research hotspot, 2D-MoS2 has been regarded as a low-cost substitute for platinum, and has fascinated researchers worldwide. Two crystalline phases of MoS2, i.e. the metallic octahedral 1T phase and semiconducting trigonal prismatic 2H phase, have been extensively analysed. In comparison to 2H-MoS2, the 1T phase exhibits enhanced and unique physicochemical properties. Designing a structure with two-dimensional mixed-phase MoS2, i.e. 1T/2H-MoS2 nanosheets, via phase engineering for effective charge separation and migration has received growing interest in the field of photocatalytic hydrogen generation. In this study, by varying the wt% of ammonium bicarbonate via a facile hydrothermal technique, a series of 1T/2H-MoS2 nanosheets have been fabricated. The presence of the corresponding elements, the electronic environment, phase purity, morphology and phase distinction were confirmed by Raman, XPS, XRD and HRTEM analyses. Additionally, the impedance data and the photocurrent density of the photocatalysts verify the efficient charge separation and transfer phenomenon. In accordance with the electrochemical measurements, the developed mixed-phase MoS2 nanosheets exhibit a six times greater current density than 2H-MoS2. Furthermore, the highest response of photocatalytic hydrogen production is observed with the photocatalyst with 79% 1T phase, which is about 17 times greater than that of pristine 2H-MoS2 due to the enrichment of active sites on both the edges and basal plane as well as the enhanced electronic conductivity due to the 1T phase. This study indicates that with the construction of a heterophase, i.e. 1T/2H-MoS2 nanosheets, the photocatalytic hydrogen evolution capability can be boosted, providing new insights regarding these materials. [ABSTRACT FROM AUTHOR]

A facile synthetic route, by using rhombic dodecahedral zeolitic imidazolate framework-8 (ZIF-8) as the structure template, is devoted to fabricating the ZnS/ZnIn2S4 hybrid heterojunction; the compact heterostructure was produced by combining the sulfurization of ZIF-8 and the in situ precipitation of ZnIn2S4 in one pot. The resulting ZnS nanoparticles of about 100 nm were uniformly dispersed in the folds of flower-like ZnIn2S4, whose structure is beneficial for charge transfer at the heterointerface. The additional quantities of ZIF-8 are varied to find an optimum ratio of the two components to obtain the best photocatalytic activity. In the photocatalytic hydrogen generation irradiated by simulated solar light, all the ZnS/ZnIn2S4 hybrid photocatalysts displayed improved hydrogen production rates compared to single ZnS or ZnIn2S4, and the best hydrogen production rate of 453.4 μmol h−1 g−1 is obtained by ZnS/ZIS-20, whose value is approximately 4 times higher than that of single ZnIn2S4. The electrochemical properties of the ZnS/ZnIn2S4 hybrid photocatalysts were measured to explore the charge transfer mode at the interface, and the band structure and enhanced photocatalytic hydrogen generation mechanism have been proposed. The excellent recycling properties of hydrogen production indicated the prospective applications of this kind of ZIF-derived metal sulfide in photocatalytic reactions. [ABSTRACT FROM AUTHOR]