Search

Artificial Intelligence in higher education (AIED) is becoming a more important research area with increasing developments and application of AI within the wider society. However, as yet AI based tools have not been widely adopted in higher education. As a result there is a lack of sound evidence available on the pedagogical impact of AI for learning and teaching. This conceptual paper thus seeks to bridge the gap and addresses the following question: is artificial intelligence really the new big thing that will revolutionise learning and teaching in higher education? Adopting the technological pedagogical content knowledge (TPACK) framework and the Unified Theory of Acceptance and Use of Technology (UTAUT) as the theoretical foundations, we argue that Artificial Intelligence (AI) technologies, at least in their current state of development, do not afford any real new advances for pedagogy in higher education. This is mainly because there does not seem to be valid evidence as to how the use of AI technologies and applications has helped students improve learning, and/or helped tutors make effective pedagogical changes. In addition, the pedagogical affordances of AI have not yet been clearly defined. The challenges that the higher education sector is currently experiencing relating to AI adoption are discussed at three hierarchical levels, namely national, institutional and personal levels. The paper ends with recommendations with regard to accelerating AI use in universities. This includes developing dedicated AI adoption strategies at the institutional level, updating the existing technology infrastructure and up-skilling academic tutors for AI.

Artificial Intelligence in higher education (AIED) is becoming a more important research area with increasing developments and application of AI within the wider society. However, as yet AI based tools have not been widely adopted in higher education. As a result there is a lack of sound evidence available on the pedagogical impact of AI for learning and teaching. This conceptual paper thus seeks to bridge the gap and addresses the following question: is artificial intelligence really the new big thing that will revolutionise learning and teaching in higher education? Adopting the technological pedagogical content knowledge (TPACK) framework and the Unified Theory of Acceptance and Use of Technology (UTAUT) as the theoretical foundations, we argue that Artificial Intelligence (AI) technologies, at least in their current state of development, do not afford any real new advances for pedagogy in higher education. This is mainly because there does not seem to be valid evidence as to how the use of AI technologies and applications has helped students improve learning, and/or helped tutors make effective pedagogical changes. In addition, the pedagogical affordances of AI have not yet been clearly defined. The challenges that the higher education sector is currently experiencing relating to AI adoption are discussed at three hierarchical levels, namely national, institutional and personal levels. The paper ends with recommendations with regard to accelerating AI use in universities. This includes developing dedicated AI adoption strategies at the institutional level, updating the existing technology infrastructure and up-skilling academic tutors for AI.

Panic buying knows no borders. Shoppers in Australia, Japan, Hong Kong and the United States have caught toilet paper fever on the back of the COVID-19 coronavirus. Shop shelves are being emptied as quickly as they can be stocked. This panic buying is the result of the fear of missing out. It’s a phenomenon of consumer behaviour similar to what happens when there is a run on banks. A bank run occurs when depositors of a bank withdraw cash because they believe it might collapse. What we’re seeing now is a toilet-paper run.

CCP6 assesses the climate change impacts and risks to ecosystems and human systems in Polar Regions, as well as options for adaptation and climate resilient development.

CCP6 assesses the climate change impacts and risks to ecosystems and human systems in Polar Regions, as well as options for adaptation and climate resilient development.

Metal oxides can deliver high capacity to Li-ion batteries, surpassing conventional graphite, but they suffer from a huge volume change during charging-discharging and poor cycle life. Herein, we merge the dual strategies of 3D-network support and sandwiching design to tackle such issue. We develop a skillful O2-NH3 reactive pyrolysis of cellulose, where the preoxidation and the aminolysis result in the spatially separated charring of cellulose chains. A cellulose fiber is wonderfully converted into several ultrathin twisted graphenic sheets instead of a dense carbon fiber, and consequently, a cellulose paper is directly transformed into a porous flexible carbon paper with high surface area and conductivity (denoted as CP). CP is further fabricated as a 3D-network support into the hybrid CP@Fe3O4@RGO, where RGO is reduced graphene oxide added for sandwiching Fe3O4 particles. As a binder-free free-standing anode, CP@Fe3O4@RGO effectively fastens Fe3O4 and buffers the volume changes on cycling, which stabilizes the passivating layer and lifts the Coulombic efficiency. The anode thus presents an ultralong cycle life of >2000 running at a high capacity level of 1160 mAh g-1. It additionally facilitates electron and ion transports, boosting the rate capability. CP and CP@Fe3O4@RGO represent a technological leap underpinning next-generation long-life high-capacity high-power batteries.

Metal oxides can deliver high capacity to Li-ion batteries, surpassing conventional graphite, but they suffer from a huge volume change during charging-discharging and poor cycle life. Herein, we merge the dual strategies of 3D-network support and sandwiching design to tackle such issue. We develop a skillful O2-NH3 reactive pyrolysis of cellulose, where the preoxidation and the aminolysis result in the spatially separated charring of cellulose chains. A cellulose fiber is wonderfully converted into several ultrathin twisted graphenic sheets instead of a dense carbon fiber, and consequently, a cellulose paper is directly transformed into a porous flexible carbon paper with high surface area and conductivity (denoted as CP). CP is further fabricated as a 3D-network support into the hybrid CP@Fe3O4@RGO, where RGO is reduced graphene oxide added for sandwiching Fe3O4 particles. As a binder-free free-standing anode, CP@Fe3O4@RGO effectively fastens Fe3O4 and buffers the volume changes on cycling, which stabilizes the passivating layer and lifts the Coulombic efficiency. The anode thus presents an ultralong cycle life of >2000 running at a high capacity level of 1160 mAh g-1. It additionally facilitates electron and ion transports, boosting the rate capability. CP and CP@Fe3O4@RGO represent a technological leap underpinning next-generation long-life high-capacity high-power batteries.

Metal oxides can deliver high capacity to Li-ion batteries, surpassing conventional graphite, but they suffer from a huge volume change during charging-discharging and poor cycle life. Herein, we merge the dual strategies of 3D-network support and sandwiching design to tackle such issue. We develop a skillful O2-NH3 reactive pyrolysis of cellulose, where the preoxidation and the aminolysis result in the spatially separated charring of cellulose chains. A cellulose fiber is wonderfully converted into several ultrathin twisted graphenic sheets instead of a dense carbon fiber, and consequently, a cellulose paper is directly transformed into a porous flexible carbon paper with high surface area and conductivity (denoted as CP). CP is further fabricated as a 3D-network support into the hybrid CP@Fe3O4@RGO, where RGO is reduced graphene oxide added for sandwiching Fe3O4 particles. As a binder-free free-standing anode, CP@Fe3O4@RGO effectively fastens Fe3O4 and buffers the volume changes on cycling, which stabilizes the passivating layer and lifts the Coulombic efficiency. The anode thus presents an ultralong cycle life of >2000 running at a high capacity level of 1160 mAh g-1. It additionally facilitates electron and ion transports, boosting the rate capability. CP and CP@Fe3O4@RGO represent a technological leap underpinning next-generation long-life high-capacity high-power batteries.

Metal oxides can deliver high capacity to Li-ion batteries, surpassing conventional graphite, but they suffer from a huge volume change during charging-discharging and poor cycle life. Herein, we merge the dual strategies of 3D-network support and sandwiching design to tackle such issue. We develop a skillful O2-NH3 reactive pyrolysis of cellulose, where the preoxidation and the aminolysis result in the spatially separated charring of cellulose chains. A cellulose fiber is wonderfully converted into several ultrathin twisted graphenic sheets instead of a dense carbon fiber, and consequently, a cellulose paper is directly transformed into a porous flexible carbon paper with high surface area and conductivity (denoted as CP). CP is further fabricated as a 3D-network support into the hybrid CP@Fe3O4@RGO, where RGO is reduced graphene oxide added for sandwiching Fe3O4 particles. As a binder-free free-standing anode, CP@Fe3O4@RGO effectively fastens Fe3O4 and buffers the volume changes on cycling, which stabilizes the passivating layer and lifts the Coulombic efficiency. The anode thus presents an ultralong cycle life of >2000 running at a high capacity level of 1160 mAh g-1. It additionally facilitates electron and ion transports, boosting the rate capability. CP and CP@Fe3O4@RGO represent a technological leap underpinning next-generation long-life high-capacity high-power batteries.

Three‐dimensional (3D) printing or additive manufacturing involves manufacturing a 3D model by laying down successive layers of materials controlled by specifications set in a digital file. Rapid evolution of this technology has allowed increased access to printers and print materials enabling customization of care to patient‐specific anatomy and pathology. In addition, 3D digital files created prior to the printing process can play important roles in clinical decision‐making and education. These digital files may simply be used in the surgical planning process or be used through the means of augmented reality (AR) or virtual reality (VR) (Fig. 1). Currently, custom‐made implants are excluded from regulatory oversight necessitating revision of these regulatory rules. With the widening application of 3D technologies, the role of a surgeon may also be blurred with that of a researcher, manufacturer and supplier necessitating new definitions of these roles and what constitutes a medical device. This discussion paper is to review the new proposed regulatory changes and its implications on the surgical workforce and practice.

Three‐dimensional (3D) printing or additive manufacturing involves manufacturing a 3D model by laying down successive layers of materials controlled by specifications set in a digital file. Rapid evolution of this technology has allowed increased access to printers and print materials enabling customization of care to patient‐specific anatomy and pathology. In addition, 3D digital files created prior to the printing process can play important roles in clinical decision‐making and education. These digital files may simply be used in the surgical planning process or be used through the means of augmented reality (AR) or virtual reality (VR) (Fig. 1). Currently, custom‐made implants are excluded from regulatory oversight necessitating revision of these regulatory rules. With the widening application of 3D technologies, the role of a surgeon may also be blurred with that of a researcher, manufacturer and supplier necessitating new definitions of these roles and what constitutes a medical device. This discussion paper is to review the new proposed regulatory changes and its implications on the surgical workforce and practice.

Three‐dimensional (3D) printing or additive manufacturing involves manufacturing a 3D model by laying down successive layers of materials controlled by specifications set in a digital file. Rapid evolution of this technology has allowed increased access to printers and print materials enabling customization of care to patient‐specific anatomy and pathology. In addition, 3D digital files created prior to the printing process can play important roles in clinical decision‐making and education. These digital files may simply be used in the surgical planning process or be used through the means of augmented reality (AR) or virtual reality (VR) (Fig. 1). Currently, custom‐made implants are excluded from regulatory oversight necessitating revision of these regulatory rules. With the widening application of 3D technologies, the role of a surgeon may also be blurred with that of a researcher, manufacturer and supplier necessitating new definitions of these roles and what constitutes a medical device. This discussion paper is to review the new proposed regulatory changes and its implications on the surgical workforce and practice.

If the modern office produces and is managed through written documents or files, as Max Weber famously argued in his work on bureaucracy, then so too does the office – and increasingly the private citizen – destroy them. Enter the lowly paper shredder, a machine that proliferates waste and serves as the repository of carefully guarded secrets and confidential records, even as it is designed to eliminate the dregs of bureaucratic culture. Until recently, in the United States as elsewhere, paper was the medium of official state law. The 20th-century rise of the paper shredder and its paper trail, as we shall see, thus reveals the material, cultural and economic entanglement of written law with destruction and consumption, security, and privacy, not only in the U.S., it turns out, but worldwide. The trail leads from formal recognition of the paper shredder in a 1909 U.S. patent to its actual manufacture and development as a business machine in Germany twenty-five or so years later, from the shredder’s role in defining political moments to its appearance in cartoons that confuse it with fax machines or legal counsel, and from regulations governing the disposition of records to industrywide ‘certificates of destruction’ that ensure against the dangers of snoopy dumpster divers.

Three‐dimensional (3D) printing or additive manufacturing involves manufacturing a 3D model by laying down successive layers of materials controlled by specifications set in a digital file. Rapid evolution of this technology has allowed increased access to printers and print materials enabling customization of care to patient‐specific anatomy and pathology. In addition, 3D digital files created prior to the printing process can play important roles in clinical decision‐making and education. These digital files may simply be used in the surgical planning process or be used through the means of augmented reality (AR) or virtual reality (VR) (Fig. 1). Currently, custom‐made implants are excluded from regulatory oversight necessitating revision of these regulatory rules. With the widening application of 3D technologies, the role of a surgeon may also be blurred with that of a researcher, manufacturer and supplier necessitating new definitions of these roles and what constitutes a medical device. This discussion paper is to review the new proposed regulatory changes and its implications on the surgical workforce and practice.

Editorial

Editorial

Editorial

Photocatalytic hydrogen evolution from water splitting, using paper as an electron donor, was achieved upon the use of a hybrid photocatalyst of mesoporous TiO2 decorated with Ni nanoparticles. Through the involvement of a Ni cocatalyst, the separation and migration of photo-generated electrons in TiO2-Ni hybrids were significantly enhanced. The soluble paper in alkaline solution played the role of a sacrificial electron donor by reacting with hydroxyl radicals generated from hole oxidation with OH−. These findings provide an inexpensive route to drive aqueous proton reduction to hydrogen through waste biomass oxidation.

Metal-organic frameworks (MOFs) and their derivatives with well-defined structures and compositions show great potential for wide applications such as sensors, catalysis, energy storage, and conversion, etc. However, poor electric conductivity and large volume expansion are main obstacles for their utilization in energy storage, e.g., lithium-ion batteries and supercapacitors. Herein, a facile strategy is proposed for embedding the MOFs, e.g., ZIF-67 and MIL-88 into polyacrylonitrile fibers, which is further used as a template to build a 3D interconnected conductive carbon necklace paper. Owing to the unique structure features of good electric conductivity, interconnected frameworks, electroactive reservoir, and dual dopants, the obtained flexible electrodes with no additives exhibit high specific capacities, good rate capability, and prolonged cycling stability. The hollow dodecahedral ZIF-67 derived carbon necklace paper delivers a high specific capacity of 1200 mAh g -1 and superior stability of more than 400 cycles without capacity decay. Moreover, the spindle-like MIL-88 derived carbon necklace paper shows a high reversible capacity of 980 mAh g -1 . Their unique 3D interconnected structure and outstanding electrochemical performance pave the way for extending the MOF-based interweaving materials toward potential applications in portable and wearable electronic devices.

Photocatalytic hydrogen evolution from water splitting, using paper as an electron donor, was achieved upon the use of a hybrid photocatalyst of mesoporous TiO2 decorated with Ni nanoparticles. Through the involvement of a Ni cocatalyst, the separation and migration of photo-generated electrons in TiO2-Ni hybrids were significantly enhanced. The soluble paper in alkaline solution played the role of a sacrificial electron donor by reacting with hydroxyl radicals generated from hole oxidation with OH−. These findings provide an inexpensive route to drive aqueous proton reduction to hydrogen through waste biomass oxidation.

Metal-organic frameworks (MOFs) and their derivatives with well-defined structures and compositions show great potential for wide applications such as sensors, catalysis, energy storage, and conversion, etc. However, poor electric conductivity and large volume expansion are main obstacles for their utilization in energy storage, e.g., lithium-ion batteries and supercapacitors. Herein, a facile strategy is proposed for embedding the MOFs, e.g., ZIF-67 and MIL-88 into polyacrylonitrile fibers, which is further used as a template to build a 3D interconnected conductive carbon necklace paper. Owing to the unique structure features of good electric conductivity, interconnected frameworks, electroactive reservoir, and dual dopants, the obtained flexible electrodes with no additives exhibit high specific capacities, good rate capability, and prolonged cycling stability. The hollow dodecahedral ZIF-67 derived carbon necklace paper delivers a high specific capacity of 1200 mAh g -1 and superior stability of more than 400 cycles without capacity decay. Moreover, the spindle-like MIL-88 derived carbon necklace paper shows a high reversible capacity of 980 mAh g -1 . Their unique 3D interconnected structure and outstanding electrochemical performance pave the way for extending the MOF-based interweaving materials toward potential applications in portable and wearable electronic devices.

Photocatalytic hydrogen evolution from water splitting, using paper as an electron donor, was achieved upon the use of a hybrid photocatalyst of mesoporous TiO2 decorated with Ni nanoparticles. Through the involvement of a Ni cocatalyst, the separation and migration of photo-generated electrons in TiO2-Ni hybrids were significantly enhanced. The soluble paper in alkaline solution played the role of a sacrificial electron donor by reacting with hydroxyl radicals generated from hole oxidation with OH−. These findings provide an inexpensive route to drive aqueous proton reduction to hydrogen through waste biomass oxidation.

Photocatalytic hydrogen evolution from water splitting, using paper as an electron donor, was achieved upon the use of a hybrid photocatalyst of mesoporous TiO2 decorated with Ni nanoparticles. Through the involvement of a Ni cocatalyst, the separation and migration of photo-generated electrons in TiO2-Ni hybrids were significantly enhanced. The soluble paper in alkaline solution played the role of a sacrificial electron donor by reacting with hydroxyl radicals generated from hole oxidation with OH−. These findings provide an inexpensive route to drive aqueous proton reduction to hydrogen through waste biomass oxidation.

Photocatalytic hydrogen evolution from water splitting, using paper as an electron donor, was achieved upon the use of a hybrid photocatalyst of mesoporous TiO2 decorated with Ni nanoparticles. Through the involvement of a Ni cocatalyst, the separation and migration of photo-generated electrons in TiO2-Ni hybrids were significantly enhanced. The soluble paper in alkaline solution played the role of a sacrificial electron donor by reacting with hydroxyl radicals generated from hole oxidation with OH−. These findings provide an inexpensive route to drive aqueous proton reduction to hydrogen through waste biomass oxidation.

Metal-organic frameworks (MOFs) and their derivatives with well-defined structures and compositions show great potential for wide applications such as sensors, catalysis, energy storage, and conversion, etc. However, poor electric conductivity and large volume expansion are main obstacles for their utilization in energy storage, e.g., lithium-ion batteries and supercapacitors. Herein, a facile strategy is proposed for embedding the MOFs, e.g., ZIF-67 and MIL-88 into polyacrylonitrile fibers, which is further used as a template to build a 3D interconnected conductive carbon necklace paper. Owing to the unique structure features of good electric conductivity, interconnected frameworks, electroactive reservoir, and dual dopants, the obtained flexible electrodes with no additives exhibit high specific capacities, good rate capability, and prolonged cycling stability. The hollow dodecahedral ZIF-67 derived carbon necklace paper delivers a high specific capacity of 1200 mAh g -1 and superior stability of more than 400 cycles without capacity decay. Moreover, the spindle-like MIL-88 derived carbon necklace paper shows a high reversible capacity of 980 mAh g -1 . Their unique 3D interconnected structure and outstanding electrochemical performance pave the way for extending the MOF-based interweaving materials toward potential applications in portable and wearable electronic devices.

Metal-organic frameworks (MOFs) and their derivatives with well-defined structures and compositions show great potential for wide applications such as sensors, catalysis, energy storage, and conversion, etc. However, poor electric conductivity and large volume expansion are main obstacles for their utilization in energy storage, e.g., lithium-ion batteries and supercapacitors. Herein, a facile strategy is proposed for embedding the MOFs, e.g., ZIF-67 and MIL-88 into polyacrylonitrile fibers, which is further used as a template to build a 3D interconnected conductive carbon necklace paper. Owing to the unique structure features of good electric conductivity, interconnected frameworks, electroactive reservoir, and dual dopants, the obtained flexible electrodes with no additives exhibit high specific capacities, good rate capability, and prolonged cycling stability. The hollow dodecahedral ZIF-67 derived carbon necklace paper delivers a high specific capacity of 1200 mAh g -1 and superior stability of more than 400 cycles without capacity decay. Moreover, the spindle-like MIL-88 derived carbon necklace paper shows a high reversible capacity of 980 mAh g -1 . Their unique 3D interconnected structure and outstanding electrochemical performance pave the way for extending the MOF-based interweaving materials toward potential applications in portable and wearable electronic devices.

Focusing on Delgamuukw v. British Columbia, this paper argues that it is not difficult, if one takes a fair look at Gitxsan and Wet’suwet’en governance, to see legal ways of knowing drawn from specific materials. The materials are different from the ones western law draws on, but that does not render them less legitimately legal. To get beyond prejudices about what counts as law, settler courts may have to begin by admitting that indigenous oral narratives, songs, totem poles and other aspects of material culture are legal materials. Then those who work in those courts would have to interrogate that new knowledge, and perhaps learn that in getting there by that method they ended up bringing colonialism with them. Instead, perhaps we can ask how someone trained as a lawyer in a textual tradition might learn to see that a song, a story, a ceremonial robe, or a totem pole, could be law or legal title rather than evidence of those things. After all, Canadian jurisdiction is as much a story as anything brought forward by the elders who testified in this case. A materialist approach cannot guarantee a better parsing of the problems of communication here, but it may shine a brighter light on what counts as jurisdiction and thus make it more difficult to accept without question that Canada’s courts have the right to decide a case like this.

Lithium sulfur batteries have been regarded as next-generation battery technology due to its high energy density, environmental benignity and abundance. However, the poor electric/ionic conductivity of sulfur limits the practical use of sulfur in an electrode. The main problem is the high solubility of long-chain polysulfides, which are the intermediates of the electrochemical processes in the liquid electrolyte. The dissolved polysulfide ions shuttle between the cathode and anode, thus causing precipitation of insulating Li 2 S 2 /Li 2 S on the surface of the electrode. The unavoidable phenomenon results in loss of active materials and fast capacity fading. In this regard, we show one simple method to prepare free-standing paper electrode used as cathode material for lithium sulfur batteries. Binder-free graphene-polypyrrole (PPy)/S-graphene (G-PPy/S-G) paper-like sandwich structural electrode was prepared by using the vacuum filtration method. In this structure, the unique graphene layers of sandwich-like framework not only serve as a conductive film, but also effectively block the diffusion of polysulfides, leading to suppression of the shuttle effect and low self-discharge behaviour. In addition, the middle layer, the PPy nanofibers can limit the diffusion of dissolved polysulfides due to the special bond with sulfur, and furthermore maintain the structural stability of the paper electrode because the nanofibers can serve as elastic springs to accommodate the huge volume changes in charging-discharging processes. When tested as cathode for Li-S batteries, the as-prepared sample G-PPy/S-G exhibits excellent electrochemical performance. We believe that our strategy could provide a useful pathway towards commercial utilizing of sulfur.

Lithium sulfur batteries have been regarded as next-generation battery technology due to its high energy density, environmental benignity and abundance. However, the poor electric/ionic conductivity of sulfur limits the practical use of sulfur in an electrode. The main problem is the high solubility of long-chain polysulfides, which are the intermediates of the electrochemical processes in the liquid electrolyte. The dissolved polysulfide ions shuttle between the cathode and anode, thus causing precipitation of insulating Li 2 S 2 /Li 2 S on the surface of the electrode. The unavoidable phenomenon results in loss of active materials and fast capacity fading. In this regard, we show one simple method to prepare free-standing paper electrode used as cathode material for lithium sulfur batteries. Binder-free graphene-polypyrrole (PPy)/S-graphene (G-PPy/S-G) paper-like sandwich structural electrode was prepared by using the vacuum filtration method. In this structure, the unique graphene layers of sandwich-like framework not only serve as a conductive film, but also effectively block the diffusion of polysulfides, leading to suppression of the shuttle effect and low self-discharge behaviour. In addition, the middle layer, the PPy nanofibers can limit the diffusion of dissolved polysulfides due to the special bond with sulfur, and furthermore maintain the structural stability of the paper electrode because the nanofibers can serve as elastic springs to accommodate the huge volume changes in charging-discharging processes. When tested as cathode for Li-S batteries, the as-prepared sample G-PPy/S-G exhibits excellent electrochemical performance. We believe that our strategy could provide a useful pathway towards commercial utilizing of sulfur.

Lithium sulfur batteries have been regarded as next-generation battery technology due to its high energy density, environmental benignity and abundance. However, the poor electric/ionic conductivity of sulfur limits the practical use of sulfur in an electrode. The main problem is the high solubility of long-chain polysulfides, which are the intermediates of the electrochemical processes in the liquid electrolyte. The dissolved polysulfide ions shuttle between the cathode and anode, thus causing precipitation of insulating Li 2 S 2 /Li 2 S on the surface of the electrode. The unavoidable phenomenon results in loss of active materials and fast capacity fading. In this regard, we show one simple method to prepare free-standing paper electrode used as cathode material for lithium sulfur batteries. Binder-free graphene-polypyrrole (PPy)/S-graphene (G-PPy/S-G) paper-like sandwich structural electrode was prepared by using the vacuum filtration method. In this structure, the unique graphene layers of sandwich-like framework not only serve as a conductive film, but also effectively block the diffusion of polysulfides, leading to suppression of the shuttle effect and low self-discharge behaviour. In addition, the middle layer, the PPy nanofibers can limit the diffusion of dissolved polysulfides due to the special bond with sulfur, and furthermore maintain the structural stability of the paper electrode because the nanofibers can serve as elastic springs to accommodate the huge volume changes in charging-discharging processes. When tested as cathode for Li-S batteries, the as-prepared sample G-PPy/S-G exhibits excellent electrochemical performance. We believe that our strategy could provide a useful pathway towards commercial utilizing of sulfur.

No doubt, Australia's parochial anxieties about China in its recent Foreign Policy White Paper stem from a Eurocentric establishment with entrenched "Cold-War" era views about international relations and fantasies about preserving a bygone legacy of Anglo-American hegemony.

This paper provides a summary of information gathered by the Intellectual Disability Behaviour Support Program (IDBS), University of New South Wales (UNSW, Sydney). The paper is designed to inform and provide an opportunity for reflection on the provision of behaviour support for people with intellectual and cognitive disability in the disability services future in Australia. This paper: 1. Introduces a conceptualisation that encourages person-centred holistic understanding of behaviour support needs and behaviour support practices; 2. Identifies issues relevant to the provision of behaviour support in an individualised and marketised disability service future; 3. Proposes the foundational building blocks for a sustained sector-wide approach to enhancing quality, efficacy, and accountability in behaviour support practice as a support for people with disability and complex support needs.

Lithium sulfur batteries have been regarded as next-generation battery technology due to its high energy density, environmental benignity and abundance. However, the poor electric/ionic conductivity of sulfur limits the practical use of sulfur in an electrode. The main problem is the high solubility of long-chain polysulfides, which are the intermediates of the electrochemical processes in the liquid electrolyte. The dissolved polysulfide ions shuttle between the cathode and anode, thus causing precipitation of insulating Li 2 S 2 /Li 2 S on the surface of the electrode. The unavoidable phenomenon results in loss of active materials and fast capacity fading. In this regard, we show one simple method to prepare free-standing paper electrode used as cathode material for lithium sulfur batteries. Binder-free graphene-polypyrrole (PPy)/S-graphene (G-PPy/S-G) paper-like sandwich structural electrode was prepared by using the vacuum filtration method. In this structure, the unique graphene layers of sandwich-like framework not only serve as a conductive film, but also effectively block the diffusion of polysulfides, leading to suppression of the shuttle effect and low self-discharge behaviour. In addition, the middle layer, the PPy nanofibers can limit the diffusion of dissolved polysulfides due to the special bond with sulfur, and furthermore maintain the structural stability of the paper electrode because the nanofibers can serve as elastic springs to accommodate the huge volume changes in charging-discharging processes. When tested as cathode for Li-S batteries, the as-prepared sample G-PPy/S-G exhibits excellent electrochemical performance. We believe that our strategy could provide a useful pathway towards commercial utilizing of sulfur.

Automating the Arts: Artificial Intelligence in Australia and New Zealand's Creative Industries

Automating the Arts: Artificial Intelligence in Australia and New Zealand's Creative Industries

Here we developed a free-standing reduced graphene oxide (rGO)-polypyrrole (PPy) hybrid paper via electropolymerization on a paper-like graphene gel. This flexible hybrid paper displayed a uniform layered structure with PPy coated onto the graphene layers. A high areal mass of 2.7 mg cm−2 could be obtained. It delivered a greatly enhanced areal capacitance of 440 mF cm−2 at 0.5 A g−1, in contrast to that 151∼198.5 mF cm−2 previously reported for graphene paper or polypyrrole-graphene paper. It can retain ∼81% of the initial capacitance at a high current density of 6 A g−1. The combined high flexibility with outstanding electrochemical performance, makes such novel hybrid paper a promising electrode for flexible supercapacitors.

Here we developed a free-standing reduced graphene oxide (rGO)-polypyrrole (PPy) hybrid paper via electropolymerization on a paper-like graphene gel. This flexible hybrid paper displayed a uniform layered structure with PPy coated onto the graphene layers. A high areal mass of 2.7 mg cm−2 could be obtained. It delivered a greatly enhanced areal capacitance of 440 mF cm−2 at 0.5 A g−1, in contrast to that 151∼198.5 mF cm−2 previously reported for graphene paper or polypyrrole-graphene paper. It can retain ∼81% of the initial capacitance at a high current density of 6 A g−1. The combined high flexibility with outstanding electrochemical performance, makes such novel hybrid paper a promising electrode for flexible supercapacitors.

The Abbott Government announced its White Paper review of the Australian Federation on June 28, 2014. Set against this backdrop, discussions of the future of Australian local government may provoke an assumption that its role will be cruelled. However, reflection suggests that such an assumption is misplaced. In particular, when the complexities of regionalism in Australia are considered, the potential role of local government begs revisiting.We argue that local government ought to adopt a forthright position in the current debate, particularly with respect to financial reform.

Here we developed a free-standing reduced graphene oxide (rGO)-polypyrrole (PPy) hybrid paper via electropolymerization on a paper-like graphene gel. This flexible hybrid paper displayed a uniform layered structure with PPy coated onto the graphene layers. A high areal mass of 2.7 mg cm−2 could be obtained. It delivered a greatly enhanced areal capacitance of 440 mF cm−2 at 0.5 A g−1, in contrast to that 151∼198.5 mF cm−2 previously reported for graphene paper or polypyrrole-graphene paper. It can retain ∼81% of the initial capacitance at a high current density of 6 A g−1. The combined high flexibility with outstanding electrochemical performance, makes such novel hybrid paper a promising electrode for flexible supercapacitors.

Here we developed a free-standing reduced graphene oxide (rGO)-polypyrrole (PPy) hybrid paper via electropolymerization on a paper-like graphene gel. This flexible hybrid paper displayed a uniform layered structure with PPy coated onto the graphene layers. A high areal mass of 2.7 mg cm−2 could be obtained. It delivered a greatly enhanced areal capacitance of 440 mF cm−2 at 0.5 A g−1, in contrast to that 151∼198.5 mF cm−2 previously reported for graphene paper or polypyrrole-graphene paper. It can retain ∼81% of the initial capacitance at a high current density of 6 A g−1. The combined high flexibility with outstanding electrochemical performance, makes such novel hybrid paper a promising electrode for flexible supercapacitors.

Here we developed a free-standing reduced graphene oxide (rGO)-polypyrrole (PPy) hybrid paper via electropolymerization on a paper-like graphene gel. This flexible hybrid paper displayed a uniform layered structure with PPy coated onto the graphene layers. A high areal mass of 2.7 mg cm−2 could be obtained. It delivered a greatly enhanced areal capacitance of 440 mF cm−2 at 0.5 A g−1, in contrast to that 151∼198.5 mF cm−2 previously reported for graphene paper or polypyrrole-graphene paper. It can retain ∼81% of the initial capacitance at a high current density of 6 A g−1. The combined high flexibility with outstanding electrochemical performance, makes such novel hybrid paper a promising electrode for flexible supercapacitors.

2015. Introduction: The nursing care plan plays an essential role in supporting care provision in Australian aged care. The implementation of electronic systems in aged care homes was anticipated to improve documentation quality. Standardized nursing terminologies, developed to improve communication and advance the nursing profession, are not required in aged care practice. The language used by nurses in the nursing care plan and the effect of the electronic system on documentation quality in residential aged care need to be investigated. Purpose: To describe documentation practice for the nursing care plan in Australian residential aged care homes and to compare the quantity and quality of documentation in paper-based and electronic nursing care plans. Methods: A nursing documentation audit was conducted in seven residential aged care homes in Australia. One hundred and eleven paper-based and 194 electronic nursing care plans, conveniently selected, were reviewed. The quantity of documentation in a care plan was determined by the number of phrases describing a resident problem and the number of goals and interventions. The quality of documentation was measured using 16 relevant questions in an instrument developed for the study. Results: There was a tendency to omit 'nursing problem' or 'nursing diagnosis' in the nursing process by changing these terms (used in the paper-based care plan) to 'observation' in the electronic version. The electronic nursing care plan documented more signs and symptoms of resident problems and evaluation of care than the paper-based format (48.30 vs. 47.34 out of 60, P <. 0.01), but had a lower total mean quality score. The electronic care plan contained fewer problem or diagnosis statements, contributing factors and resident outcomes than the paper-based system (P <. 0.01). Both types of nursing care plan were weak in documenting measurable and concrete resident outcomes. Conclusions: The overall quality of documentation content for th

2015. Introduction: The nursing care plan plays an essential role in supporting care provision in Australian aged care. The implementation of electronic systems in aged care homes was anticipated to improve documentation quality. Standardized nursing terminologies, developed to improve communication and advance the nursing profession, are not required in aged care practice. The language used by nurses in the nursing care plan and the effect of the electronic system on documentation quality in residential aged care need to be investigated. Purpose: To describe documentation practice for the nursing care plan in Australian residential aged care homes and to compare the quantity and quality of documentation in paper-based and electronic nursing care plans. Methods: A nursing documentation audit was conducted in seven residential aged care homes in Australia. One hundred and eleven paper-based and 194 electronic nursing care plans, conveniently selected, were reviewed. The quantity of documentation in a care plan was determined by the number of phrases describing a resident problem and the number of goals and interventions. The quality of documentation was measured using 16 relevant questions in an instrument developed for the study. Results: There was a tendency to omit 'nursing problem' or 'nursing diagnosis' in the nursing process by changing these terms (used in the paper-based care plan) to 'observation' in the electronic version. The electronic nursing care plan documented more signs and symptoms of resident problems and evaluation of care than the paper-based format (48.30 vs. 47.34 out of 60, P <. 0.01), but had a lower total mean quality score. The electronic care plan contained fewer problem or diagnosis statements, contributing factors and resident outcomes than the paper-based system (P <. 0.01). Both types of nursing care plan were weak in documenting measurable and concrete resident outcomes. Conclusions: The overall quality of documentation content for th

2015. Introduction: The nursing care plan plays an essential role in supporting care provision in Australian aged care. The implementation of electronic systems in aged care homes was anticipated to improve documentation quality. Standardized nursing terminologies, developed to improve communication and advance the nursing profession, are not required in aged care practice. The language used by nurses in the nursing care plan and the effect of the electronic system on documentation quality in residential aged care need to be investigated. Purpose: To describe documentation practice for the nursing care plan in Australian residential aged care homes and to compare the quantity and quality of documentation in paper-based and electronic nursing care plans. Methods: A nursing documentation audit was conducted in seven residential aged care homes in Australia. One hundred and eleven paper-based and 194 electronic nursing care plans, conveniently selected, were reviewed. The quantity of documentation in a care plan was determined by the number of phrases describing a resident problem and the number of goals and interventions. The quality of documentation was measured using 16 relevant questions in an instrument developed for the study. Results: There was a tendency to omit 'nursing problem' or 'nursing diagnosis' in the nursing process by changing these terms (used in the paper-based care plan) to 'observation' in the electronic version. The electronic nursing care plan documented more signs and symptoms of resident problems and evaluation of care than the paper-based format (48.30 vs. 47.34 out of 60, P <. 0.01), but had a lower total mean quality score. The electronic care plan contained fewer problem or diagnosis statements, contributing factors and resident outcomes than the paper-based system (P <. 0.01). Both types of nursing care plan were weak in documenting measurable and concrete resident outcomes. Conclusions: The overall quality of documentation content for th

2015. Introduction: The nursing care plan plays an essential role in supporting care provision in Australian aged care. The implementation of electronic systems in aged care homes was anticipated to improve documentation quality. Standardized nursing terminologies, developed to improve communication and advance the nursing profession, are not required in aged care practice. The language used by nurses in the nursing care plan and the effect of the electronic system on documentation quality in residential aged care need to be investigated. Purpose: To describe documentation practice for the nursing care plan in Australian residential aged care homes and to compare the quantity and quality of documentation in paper-based and electronic nursing care plans. Methods: A nursing documentation audit was conducted in seven residential aged care homes in Australia. One hundred and eleven paper-based and 194 electronic nursing care plans, conveniently selected, were reviewed. The quantity of documentation in a care plan was determined by the number of phrases describing a resident problem and the number of goals and interventions. The quality of documentation was measured using 16 relevant questions in an instrument developed for the study. Results: There was a tendency to omit 'nursing problem' or 'nursing diagnosis' in the nursing process by changing these terms (used in the paper-based care plan) to 'observation' in the electronic version. The electronic nursing care plan documented more signs and symptoms of resident problems and evaluation of care than the paper-based format (48.30 vs. 47.34 out of 60, P <. 0.01), but had a lower total mean quality score. The electronic care plan contained fewer problem or diagnosis statements, contributing factors and resident outcomes than the paper-based system (P <. 0.01). Both types of nursing care plan were weak in documenting measurable and concrete resident outcomes. Conclusions: The overall quality of documentation content for th

A novel porous graphene paper is prepared via freeze drying a wet graphene oxide gel, followed by thermal and chemical reduction. The macroscopic structure of the formed graphene paper can be tuned by the water content in the gel precursor. With 92% water content, an interconnected macroporous network can be formed. This porous graphene (PG) paper exhibits excellent electrochemical properties. It can deliver a high discharge capacity of 420 mA h g−1 at a current density of 2000 mA g−1 when used as binder-free lithium ion battery anode. PG paper exhibits a specific capacitance of 137 F g−1 at 1 A g−1 in a flexible all-solid-state supercapacitor with PVA/H2SO4 electrolyte. It can maintain 94% of its capacitance under bending. This electrochemical performance and mechanical flexibility makes it an excellent material for flexible energy storage devices.

A novel porous graphene paper is prepared via freeze drying a wet graphene oxide gel, followed by thermal and chemical reduction. The macroscopic structure of the formed graphene paper can be tuned by the water content in the gel precursor. With 92% water content, an interconnected macroporous network can be formed. This porous graphene (PG) paper exhibits excellent electrochemical properties. It can deliver a high discharge capacity of 420 mA h g−1 at a current density of 2000 mA g−1 when used as binder-free lithium ion battery anode. PG paper exhibits a specific capacitance of 137 F g−1 at 1 A g−1 in a flexible all-solid-state supercapacitor with PVA/H2SO4 electrolyte. It can maintain 94% of its capacitance under bending. This electrochemical performance and mechanical flexibility makes it an excellent material for flexible energy storage devices.

2015. Introduction: The nursing care plan plays an essential role in supporting care provision in Australian aged care. The implementation of electronic systems in aged care homes was anticipated to improve documentation quality. Standardized nursing terminologies, developed to improve communication and advance the nursing profession, are not required in aged care practice. The language used by nurses in the nursing care plan and the effect of the electronic system on documentation quality in residential aged care need to be investigated. Purpose: To describe documentation practice for the nursing care plan in Australian residential aged care homes and to compare the quantity and quality of documentation in paper-based and electronic nursing care plans. Methods: A nursing documentation audit was conducted in seven residential aged care homes in Australia. One hundred and eleven paper-based and 194 electronic nursing care plans, conveniently selected, were reviewed. The quantity of documentation in a care plan was determined by the number of phrases describing a resident problem and the number of goals and interventions. The quality of documentation was measured using 16 relevant questions in an instrument developed for the study. Results: There was a tendency to omit 'nursing problem' or 'nursing diagnosis' in the nursing process by changing these terms (used in the paper-based care plan) to 'observation' in the electronic version. The electronic nursing care plan documented more signs and symptoms of resident problems and evaluation of care than the paper-based format (48.30 vs. 47.34 out of 60, P <. 0.01), but had a lower total mean quality score. The electronic care plan contained fewer problem or diagnosis statements, contributing factors and resident outcomes than the paper-based system (P <. 0.01). Both types of nursing care plan were weak in documenting measurable and concrete resident outcomes. Conclusions: The overall quality of documentation content for th

A novel porous graphene paper is prepared via freeze drying a wet graphene oxide gel, followed by thermal and chemical reduction. The macroscopic structure of the formed graphene paper can be tuned by the water content in the gel precursor. With 92% water content, an interconnected macroporous network can be formed. This porous graphene (PG) paper exhibits excellent electrochemical properties. It can deliver a high discharge capacity of 420 mA h g−1 at a current density of 2000 mA g−1 when used as binder-free lithium ion battery anode. PG paper exhibits a specific capacitance of 137 F g−1 at 1 A g−1 in a flexible all-solid-state supercapacitor with PVA/H2SO4 electrolyte. It can maintain 94% of its capacitance under bending. This electrochemical performance and mechanical flexibility makes it an excellent material for flexible energy storage devices.