Search

Fundamental scientific advances can take decades to translate into improvements in human health. Shortening this interval would increase the rate at which scientific discoveries lead to successful treatment of human disease. One way to accomplish this would be to identify which advances in knowledge are most likely to translate into clinical research. Toward that end, we built a machine learning system that detects whether a paper is likely to be cited by a future clinical trial or guideline. Despite the noisiness of citation dynamics, as little as 2 years of postpublication data yield accurate predictions about a paper's eventual citation by a clinical article (accuracy = 84%, F1 score = 0.56; compared to 19% accuracy by chance). We found that distinct knowledge flow trajectories are linked to papers that either succeed or fail to influence clinical research. Translational progress in biomedicine can therefore be assessed and predicted in real time based on information conveyed by the scientific community's early reaction to a paper. [ABSTRACT FROM AUTHOR]

The prediction of cell-lines sensitivity to a given set of compounds is a very important factor in the optimization of in-vitro assays. To date, the most common prediction strategies are based upon machine learning or other quantitative structure-activity relationships (QSAR) based approaches. In the present research, we propose and discuss a straightforward strategy not based on any learning modelling but exclusively relying upon the chemical similarity of a query compound to reference compounds with annotated activity against cell lines. We also compare the performance of the proposed method to machine learning predictions on the same problem. A curated database of compounds-cell lines associations derived from ChemBL version 22 was created for algorithm construction and cross-validation. Validation was done using 10-fold cross-validation and testing the models on new data obtained from ChemBL version 25. In terms of accuracy, both methods perform similarly with values around 0.65 across 750 cell lines in 10-fold cross-validation experiments. By combining both methods it is possible to achieve 66% of correct classification rate in more than 26000 newly reported interactions comprising 11000 new compounds. A Web Service implementing the described approaches (both similarity and machine learning based models) is freely available at: . [ABSTRACT FROM AUTHOR]

Sensor network intrusion detection has attracted extensive attention. However, previous intrusion detection methods face the highly imbalanced attack class distribution problem, and they may not achieve a satisfactory performance. To solve this problem, we propose a new intrusion detection algorithm based on normalized cut spectral clustering for sensor network in this paper. The main aim is to reduce the imbalance degree among classes in an intrusion detection system. First, we design a normalized cut spectral clustering to reduce the imbalance degree between every two classes in the intrusion detection data set. Second, we train a network intrusion detection classifier on the new data set. Finally, we do extensive experiments and analyze the experimental results in detail. Simulation experiments show that our algorithm can reduce the imbalance degree among classes and reserves the distribution of the original data on the one hand, and improve effectively the detection performance on the other hand. [ABSTRACT FROM AUTHOR]

Temporal hierarchies have been widely used during the past few years as they are capable to provide more accurate coherent forecasts at different planning horizons. However, they still display some limitations, being mainly subject to the forecasting methods used for generating the base forecasts and the particularities of the examined series. This paper deals with such limitations by considering three different strategies: (i) combining forecasts of multiple methods, (ii) applying bias adjustments and (iii) selectively implementing temporal hierarchies to avoid seasonal shrinkage. The proposed strategies can be applied either separately or simultaneously, being complements to the method considered for reconciling the base forecasts and completely independent from each other. Their effect is evaluated using the monthly series of the M and M3 competitions. The results are very promising, displaying lots of potential for improving the performance of temporal hierarchies, both in terms of accuracy and bias. [ABSTRACT FROM AUTHOR]

Background and objective: To take full advantage of decision support, machine learning, and patient-level prediction models, it is important that models are not only created, but also deployed in a clinical setting. The KETOS platform demonstrated in this work implements a tool for researchers allowing them to perform statistical analyses and deploy resulting models in a secure environment. Methods: The proposed system uses Docker virtualization to provide researchers with reproducible data analysis and development environments, accessible via Jupyter Notebook, to perform statistical analysis and develop, train and deploy models based on standardized input data. The platform is built in a modular fashion and interfaces with web services using the Health Level 7 (HL7) Fast Healthcare Interoperability Resources (FHIR) standard to access patient data. In our prototypical implementation we use an OMOP common data model (OMOP-CDM) database. The architecture supports the entire research lifecycle from creating a data analysis environment, retrieving data, and training to final deployment in a hospital setting. Results: We evaluated the platform by establishing and deploying an analysis and end user application for hemoglobin reference intervals within the University Hospital Erlangen. To demonstrate the potential of the system to deploy arbitrary models, we loaded a colorectal cancer dataset into an OMOP database and built machine learning models to predict patient outcomes and made them available via a web service. We demonstrated both the integration with FHIR as well as an example end user application. Finally, we integrated the platform with the open source DataSHIELD architecture to allow for distributed privacy preserving data analysis and training across networks of hospitals. Conclusion: The KETOS platform takes a novel approach to data analysis, training and deploying decision support models in a hospital or healthcare setting. It does so in a secure and privacy-preserving manner, combining the flexibility of Docker virtualization with the advantages of standardized vocabularies, a widely applied database schema (OMOP-CDM), and a standardized way to exchange medical data (FHIR). [ABSTRACT FROM AUTHOR]

Purpose: Development of a supervised machine-learning model capable of predicting clinically relevant molecular subtypes of pancreatic ductal adenocarcinoma (PDAC) from diffusion-weighted-imaging-derived radiomic features. Methods: The retrospective observational study assessed 55 surgical PDAC patients. Molecular subtypes were defined by immunohistochemical staining of KRT81. Tumors were manually segmented and 1606 radiomic features were extracted with PyRadiomics. A gradient-boosted-tree algorithm was trained on 70% of the patients (N = 28) and tested on 30% (N = 17) to predict KRT81+ vs. KRT81- tumor subtypes. A gradient-boosted survival regression model was fit to the disease-free and overall survival data. Chemotherapy response and survival were assessed stratified by subtype and radiomic signature. Radiomic feature importance was ranked. Results: The mean±STDEV sensitivity, specificity and ROC-AUC were 0.90±0.07, 0.92±0.11, and 0.93±0.07, respectively. The mean±STDEV concordance indices between the disease-free and overall survival predicted by the model based on the radiomic parameters and actual patient survival were 0.76±0.05 and 0.71±0.06, respectively. Patients with a KRT81+ subtype experienced significantly diminished median overall survival compared to KRT81- patients (7.0 vs. 22.6 months, HR 4.03, log-rank-test P = <0.001) and a significantly improved response to gemcitabine-based chemotherapy over FOLFIRINOX (10.14 vs. 3.8 months median overall survival, HR 2.33, P = 0.037) compared to KRT81- patients, who responded significantly better to FOLFIRINOX over gemcitabine-based treatment (30.8 vs. 13.4 months median overall survival, HR 2.41, P = 0.027). Entropy was ranked as the most important radiomic feature. Conclusions: The machine-learning based analysis of radiomic features enables the prediction of subtypes of PDAC, which are highly relevant for disease-free and overall patient survival and response to chemotherapy. [ABSTRACT FROM AUTHOR]

Most cetacean species are wide-ranging and highly mobile, creating significant challenges for researchers by limiting the scope of data that can be collected and leaving large areas un-surveyed. Aerial surveys have proven an effective way to locate and study cetacean movements but are costly and limited in spatial extent. Here we present a semi-automated pipeline for whale detection from very high-resolution (sub-meter) satellite imagery that makes use of a convolutional neural network (CNN). We trained ResNet, and DenseNet CNNs using down-scaled aerial imagery and tested each model on 31 cm-resolution imagery obtained from the WorldView-3 sensor. Satellite imagery was tiled and the trained algorithms were used to classify whether or not a tile was likely to contain a whale. Our best model correctly classified 100% of tiles with whales, and 94% of tiles containing only water. All model architectures performed well, with learning rate controlling performance more than architecture. While the resolution of commercially-available satellite imagery continues to make whale identification a challenging problem, our approach provides the means to efficiently eliminate areas without whales and, in doing so, greatly accelerates ocean surveys for large cetaceans. [ABSTRACT FROM AUTHOR]

Background: The Sequential Organ Failure Assessment (SOFA) score is commonly used in ICUs around the world, designed to assess the severity of the patient's clinical state based on function/dysfunction of six major organ systems. The goal of this work is to build a computational model to predict mortality based on a series of SOFA scores. In addition, we examined the possibility of improving the prediction by incorporating a new component designed to measure the performance of the gastrointestinal system, added to the other six components. Methods: In this retrospective study, we used patients’ three latest SOFA scores recorded during an individual ICU stay as input to different machine learning models and ensemble learning models. We added three validated parameters representing gastrointestinal failure. Among others, we used classification models such as Support Vector Machines (SVMs), Neural Networks, Logistic Regression and a penalty function used to increase model robustness in regard to certain extreme cases, which may be found in ICU population. We used the Area under Curve (AUC) performance metric to examine performance. Results: We found an ensemble model of linear and logistic regression achieves a higher AUC compared related works in past years. After incorporating the gastrointestinal failure score along with the penalty function, our best performing ensemble model resulted in an additional improvement in terms of AUC metrics. We implemented and compared 36 different models that were built using both the information from the SOFA score as well as that of the gastrointestinal system. All compared models have approximately similar and relatively large AUC (between 0.8645 and 0.9146) with the best results are achieved by incorporating the gastrointestinal parameters into the prediction models. Conclusions: Our findings indicate that gastrointestinal parameters carry significant information as a mortality predictor in addition to the conventional SOFA score. This information improves the predictive power of machine learning models by extending the SOFA to include information related to gastrointestinal organ system. The described method improves mortality prediction by considering the dynamics of the extended SOFA score. Although tested on a limited data set, the results' stability across different models suggests robustness in real-time use. [ABSTRACT FROM AUTHOR]

Cancer driver genes, i.e., oncogenes and tumor suppressor genes, are involved in the acquisition of important functions in tumors, providing a selective growth advantage, allowing uncontrolled proliferation and avoiding apoptosis. It is therefore important to identify these driver genes, both for the fundamental understanding of cancer and to help finding new therapeutic targets or biomarkers. Although the most frequently mutated driver genes have been identified, it is believed that many more remain to be discovered, particularly for driver genes specific to some cancer types. In this paper, we propose a new computational method called LOTUS to predict new driver genes. LOTUS is a machine-learning based approach which allows to integrate various types of data in a versatile manner, including information about gene mutations and protein-protein interactions. In addition, LOTUS can predict cancer driver genes in a pan-cancer setting as well as for specific cancer types, using a multitask learning strategy to share information across cancer types. We empirically show that LOTUS outperforms five other state-of-the-art driver gene prediction methods, both in terms of intrinsic consistency and prediction accuracy, and provide predictions of new cancer genes across many cancer types. [ABSTRACT FROM AUTHOR]

The blood flow through the major vessels holds great diagnostic potential for the identification of cardiovascular complications and is therefore routinely assessed with current diagnostic modalities. Heart valves are subject to high hydrodynamic loads which render them prone to premature degradation. Failing native aortic valves are routinely replaced with bioprosthetic heart valves. This type of prosthesis is limited by a durability that is often less than the patient’s life expectancy. Frequent assessment of valvular function can therefore help to ensure good long-term outcomes and to plan reinterventions. In this article, we describe how unsupervised novelty detection algorithms can be used to automate the interpretation of blood flow data to improve outcomes through early detection of adverse cardiovascular events without requiring repeated check-ups in a clinical environment. The proposed method was tested in an in-vitro flow loop which allowed simulating a failing aortic valve in a laboratory setting. Aortic regurgitation of increasing severity was deliberately introduced with tube-shaped inserts, preventing complete valve closure during diastole. Blood flow recordings from a flow meter at the location of the ascending aorta were analyzed with the algorithms introduced in this article and a diagnostic index was defined that reflects the severity of valvular degradation. The results indicate that the proposed methodology offers a high sensitivity towards pathological changes of valvular function and that it is capable of automatically identifying valvular degradation. Such methods may be a step towards computer-assisted diagnostics and telemedicine that provide the clinician with novel tools to improve patient care. [ABSTRACT FROM AUTHOR]

Objective: The Centers for Disease Control and Prevention (CDC) coordinates a labor-intensive process to measure the prevalence of autism spectrum disorder (ASD) among children in the United States. Random forests methods have shown promise in speeding up this process, but they lag behind human classification accuracy by about 5%. We explore whether more recently available document classification algorithms can close this gap. Materials and methods: Using data gathered from a single surveillance site, we applied 8 supervised learning algorithms to predict whether children meet the case definition for ASD based solely on the words in their evaluations. We compared the algorithms’ performance across 10 random train-test splits of the data, using classification accuracy, F1 score, and number of positive calls to evaluate their potential use for surveillance. Results: Across the 10 train-test cycles, the random forest and support vector machine with Naive Bayes features (NB-SVM) each achieved slightly more than 87% mean accuracy. The NB-SVM produced significantly more false negatives than false positives (P = 0.027), but the random forest did not, making its prevalence estimates very close to the true prevalence in the data. The best-performing neural network performed similarly to the random forest on both measures. Discussion: The random forest performed as well as more recently available models like the NB-SVM and the neural network, and it also produced good prevalence estimates. NB-SVM may not be a good candidate for use in a fully-automated surveillance workflow due to increased false negatives. More sophisticated algorithms, like hierarchical convolutional neural networks, may not be feasible to train due to characteristics of the data. Current algorithms might perform better if the data are abstracted and processed differently and if they take into account information about the children in addition to their evaluations. Conclusion: Deep learning models performed similarly to traditional machine learning methods at predicting the clinician-assigned case status for CDC’s autism surveillance system. While deep learning methods had limited benefit in this task, they may have applications in other surveillance systems. [ABSTRACT FROM AUTHOR]

Comprehensive information on the timing and location of gene expression is fundamental to our understanding of embryonic development and tissue formation. While high-throughput in situ hybridization projects provide invaluable information about developmental gene expression patterns for model organisms like Drosophila, the output of these experiments is primarily qualitative, and a high proportion of protein coding genes and most non-coding genes lack any annotation. Accurate data-centric predictions of spatio-temporal gene expression will therefore complement current in situ hybridization efforts. Here, we applied a machine learning approach by training models on all public gene expression and chromatin data, even from whole-organism experiments, to provide genome-wide, quantitative spatio-temporal predictions for all genes. We developed structured in silico nano-dissection, a computational approach that predicts gene expression in >200 tissue-developmental stages. The algorithm integrates expression signals from a compendium of 6,378 genome-wide expression and chromatin profiling experiments in a cell lineage-aware fashion. We systematically evaluated our performance via cross-validation and experimentally confirmed 22 new predictions for four different embryonic tissues. The model also predicts complex, multi-tissue expression and developmental regulation with high accuracy. We further show the potential of applying these genome-wide predictions to extract tissue specificity signals from non-tissue-dissected experiments, and to prioritize tissues and stages for disease modeling. This resource, together with the exploratory tools are freely available at our webserver , which provides a valuable tool for a range of applications, from predicting spatio-temporal expression patterns to recognizing tissue signatures from differential gene expression profiles. [ABSTRACT FROM AUTHOR]

High Content Analysis (HCA) has become a cornerstone of cellular analysis within the drug discovery industry. To expand the capabilities of HCA, we have applied the same analysis methods, validated in numerous mammalian cell models, to microbiology methodology. Image acquisition and analysis of various microbial samples, ranging from pure cultures to culture mixtures containing up to three different bacterial species, were quantified and identified using various machine learning processes. These HCA techniques allow for faster cell enumeration than standard agar-plating methods, identification of “viable but not plate culturable” microbe phenotype, classification of antibiotic treatment effects, and identification of individual microbial strains in mixed cultures. These methods greatly expand the utility of HCA methods and automate tedious and low-throughput standard microbiological methods. [ABSTRACT FROM AUTHOR]

While most of the existing class stability assessors just rely on structural information retrieved from a desired source code snapshot. However, class stability is intrinsically characterized by the evolution of a number of dependencies and change propagation factors which aid to promote the ripple effect. Identification of classes prone to ripple effect (instable classes) through mining the version history of change propagation factors can aid developers to reduce the efforts needed to maintain and evolve the system. We propose Historical Information for Class Stability Prediction (HICSP), an approach to exploit change history information to predict the instable classes based on its correlation with change propagation factors. Subsequently, we performed two empirical studies. In the first study, we evaluate the HICSP on the version history of 10 open source projects. Subsequently, in the second replicated study, we evaluate the effectiveness of HICSP by tuning the parameters of its stability assessors. We observed the 4 to 16 percent improvement in term of F-measure value to predict the instable classes through HICSP as compared to existing class stability assessors. The promising results indicate that HICSP is able to identify instable classes and can aid developers in their decision making. [ABSTRACT FROM AUTHOR]

Neural correlates of mind wandering: The ability to detect mind wandering as it occurs is an important step towards improving our understanding of this phenomenon and studying its effects on learning and performance. Current detection methods typically rely on observable behaviour in laboratory settings, which do not capture the underlying neural processes and may not translate well into real-world settings. We address both of these issues by recording electroencephalography (EEG) simultaneously from 15 participants during live lectures on research in orthopedic surgery. We performed traditional group-level analysis and found neural correlates of mind wandering during live lectures that are similar to those found in some laboratory studies, including a decrease in occipitoparietal alpha power and frontal, temporal, and occipital beta power. However, individual-level analysis of these same data revealed that patterns of brain activity associated with mind wandering were more broadly distributed and highly individualized than revealed in the group-level analysis. Mind wandering detection: To apply these findings to mind wandering detection, we used a data-driven method known as common spatial patterns to discover scalp topologies for each individual that reflects their differences in brain activity when mind wandering versus attending to lectures. This approach avoids reliance on known neural correlates primarily established through group-level statistics. Using this method for individual-level machine learning of mind wandering from EEG, we were able to achieve an average detection accuracy of 80–83%. Conclusions: Modelling mind wandering at the individual level may reveal important details about its neural correlates that are not reflected when using traditional observational and statistical methods. Using machine learning techniques for this purpose can provide new insight into the varieties of neural activity involved in mind wandering, while also enabling real-time detection of mind wandering in naturalistic settings. [ABSTRACT FROM AUTHOR]

Filter or screening methods are often used as a preprocessing step for reducing the number of variables used by a learning algorithm in obtaining a classification or regression model. While there are many such filter methods, there is a need for an objective evaluation of these methods. Such an evaluation is needed to compare them with each other and also to answer whether they are at all useful, or a learning algorithm could do a better job without them. For this purpose, many popular screening methods are partnered in this paper with three regression learners and five classification learners and evaluated on ten real datasets to obtain accuracy criteria such as R-square and area under the ROC curve (AUC). The obtained results are compared through curve plots and comparison tables in order to find out whether screening methods help improve the performance of learning algorithms and how they fare with each other. Our findings revealed that the screening methods were useful in improving the prediction of the best learner on two regression and two classification datasets out of the ten datasets evaluated. [ABSTRACT FROM AUTHOR]

In-silico identification of potential target genes for disease is an essential aspect of drug target discovery. Recent studies suggest that successful targets can be found through by leveraging genetic, genomic and protein interaction information. Here, we systematically tested the ability of 12 varied algorithms, based on network propagation, to identify genes that have been targeted by any drug, on gene-disease data from 22 common non-cancerous diseases in OpenTargets. We considered two biological networks, six performance metrics and compared two types of input gene-disease association scores. The impact of the design factors in performance was quantified through additive explanatory models. Standard cross-validation led to over-optimistic performance estimates due to the presence of protein complexes. In order to obtain realistic estimates, we introduced two novel protein complex-aware cross-validation schemes. When seeding biological networks with known drug targets, machine learning and diffusion-based methods found around 2-4 true targets within the top 20 suggestions. Seeding the networks with genes associated to disease by genetics decreased performance below 1 true hit on average. The use of a larger network, although noisier, improved overall performance. We conclude that diffusion-based prioritisers and machine learning applied to diffusion-based features are suited for drug discovery in practice and improve over simpler neighbour-voting methods. We also demonstrate the large impact of choosing an adequate validation strategy and the definition of seed disease genes. [ABSTRACT FROM AUTHOR]

In transcriptomics, micro RNAs (miRNAs) has gained much interest especially as potential disease indicators. However, apart from holding a great promise related to their clinical application, a lot of inconsistent results have been published. Our aim was to compare the miRNA expression levels in ovarian cancer and healthy subjects using the Bayesian multilevel model and to assess their potential usefulness in diagnosis. We have analyzed a case-control observational data on expression profiling of 49 preselected miRNA-based ovarian cancer indicators in 119 controls and 59 patients. A Bayesian multilevel model was used to characterize the effect of disease on miRNA levels controlling for differences in age and body weight. The difference between the miRNA level and health status of the patient on the scale of the data variability were discussed in the context of their potential usefulness in diagnosis. Additionally, the cross-validated area under the ROC curve (AUC) was used to assess the expected out-of-sample discrimination index of a different sets of miRNAs. The proposed model allowed us to describe the set of miRNA levels in patients and controls. Three highly correlated miRNAs: miR-101-3p, miR-142-5p, miR-148a-3p rank the highest with almost identical effect sizes that ranges from 0.45 to 1.0. For those miRNAs the credible interval for AUC ranged from 0.63 to 0.67 indicating their limited discrimination potential. A little benefit in adding information from other miRNAs was observed. There were several miRNAs in the dataset (miR-604, hsa-miR-221-5p) for which inferences were uncertain. For those miRNAs more experimental effort is needed to fully assess their effect in the context of new hits discovery and usefulness as disease indicators. The proposed multilevel Bayesian model can be used to characterize the panel of miRNA profile and to assess the difference in expression levels between healthy and cancer individuals. [ABSTRACT FROM AUTHOR]

Caveolae are plasma membrane invaginations whose formation requires caveolin-1 (Cav1), the adaptor protein polymerase I, and the transcript release factor (PTRF or CAVIN1). Caveolae have an important role in cell functioning, signaling, and disease. In the absence of CAVIN1/PTRF, Cav1 forms non-caveolar membrane domains called scaffolds. In this work, we train machine learning models to automatically distinguish between caveolae and scaffolds from single molecule localization microscopy (SMLM) data. We apply machine learning algorithms to discriminate biological structures from SMLM data. Our work is the first that is leveraging machine learning approaches (including deep learning models) to automatically identifying biological structures from SMLM data. In particular, we develop and compare three binary classification methods to identify whether or not a given 3D cluster of Cav1 proteins is a caveolae. The first uses a random forest classifier applied to 28 hand-crafted/designed features, the second uses a convolutional neural net (CNN) applied to a projection of the point clouds onto three planes, and the third uses a PointNet model, a recent development that can directly take point clouds as its input. We validate our methods on a dataset of super-resolution microscopy images of PC3 prostate cancer cells labeled for Cav1. Specifically, we have images from two cell populations: 10 PC3 and 10 CAVIN1/PTRF-transfected PC3 cells (PC3-PTRF cells) that form caveolae. We obtained a balanced set of 1714 different cellular structures. Our results show that both the random forest on hand-designed features and the deep learning approach achieve high accuracy in distinguishing the intrinsic features of the caveolae and non-caveolae biological structures. More specifically, both random forest and deep CNN classifiers achieve classification accuracy reaching 94% on our test set, while the PointNet model only reached 83% accuracy. We also discuss the pros and cons of the different approaches. [ABSTRACT FROM AUTHOR]

Purpose: To benchmark the human and machine performance of spectral-domain (SD) and swept-source (SS) optical coherence tomography (OCT) image segmentation, i.e., pixel-wise classification, for the compartments vitreous, retina, choroid, sclera. Methods: A convolutional neural network (CNN) was trained on OCT B-scan images annotated by a senior ground truth expert retina specialist to segment the posterior eye compartments. Independent benchmark data sets (30 SDOCT and 30 SSOCT) were manually segmented by three classes of graders with varying levels of ophthalmic proficiencies. Nine graders contributed to benchmark an additional 60 images in three consecutive runs. Inter-human and intra-human class agreement was measured and compared to the CNN results. Results: The CNN training data consisted of a total of 6210 manually segmented images derived from 2070 B-scans (1046 SDOCT and 1024 SSOCT; 630 C-Scans). The CNN segmentation revealed a high agreement with all grader groups. For all compartments and groups, the mean Intersection over Union (IOU) score of CNN compartmentalization versus group graders’ compartmentalization was higher than the mean score for intra-grader group comparison. Conclusion: The proposed deep learning segmentation algorithm (CNN) for automated eye compartment segmentation in OCT B-scans (SDOCT and SSOCT) is on par with manual segmentations by human graders. [ABSTRACT FROM AUTHOR]

While there have been many studies using machine learning (ML) algorithms to predict process outcomes and device performance in semiconductor manufacturing, the extensively developed technology computer-aided design (TCAD) physical models should play a more significant role in conjunction with ML. While TCAD models have been effective in predicting the trends of experiments, a machine learning statistical model is more capable of predicting the anomalous effects that can be dependent on the chambers, machines, fabrication environment, and specific layouts. In this paper, we use an analytics-statistics mixed training (ASMT) approach using TCAD. Under this method, the TCAD models are incorporated into the machine learning training procedure. The mixed dataset with the experimental and TCAD results improved the prediction in terms of accuracy. With the application of ASMT to the BOSCH process, we show that the mean square error (MSE) can be effectively decreased when the analytics-statistics mixed training (ASMT) scheme is used instead of the classic neural network (NN) used in the baseline study. In this method, statistical induction and analytical deduction can be combined to increase the prediction accuracy of future intelligent semiconductor manufacturing. [ABSTRACT FROM AUTHOR]

Accurately predicting and testing the types of Pulmonary arterial hypertension (PAH) of each patient using cost-effective microarray-based expression data and machine learning algorithms could greatly help either identifying the most targeting medicine or adopting other therapeutic measures that could correct/restore defective genetic signaling at the early stage. Furthermore, the prediction model construction processes can also help identifying highly informative genes controlling PAH, leading to enhanced understanding of the disease etiology and molecular pathways. In this study, we used several different gene filtering methods based on microarray expression data obtained from a high-quality patient PAH dataset. Following that, we proposed a novel feature selection and refinement algorithm in conjunction with well-known machine learning methods to identify a small set of highly informative genes. Results indicated that clusters of small-expression genes could be extremely informative at predicting and differentiating different forms of PAH. Additionally, our proposed novel feature refinement algorithm could lead to significant enhancement in model performance. To summarize, integrated with state-of-the-art machine learning and novel feature refining algorithms, the most accurate models could provide near-perfect classification accuracies using very few (close to ten) low-expression genes. [ABSTRACT FROM AUTHOR]

Background: Current diagnostics are inadequate to meet the challenges presented by co-infection with Mycobacterium tuberculosis (Mtb) and HIV, the leading cause of death for HIV-infected individuals. Improved characterization of Mtb/HIV coinfection as a distinct disease state may lead to better identification and treatment of affected individuals. Methods: Four previously-published TB and HIV co-infection related datasets were used to train and validate multinomial machine learning classifiers that simultaneously predict TB and HIV status. Classifier predictive performance was measured using leave-one-out cross validation on the training set and blind predictive performance on multiple test sets using area under the ROC curve (AUC) as the performance metric. Linear modelling of signature gene expression was applied to systematically classify genes as TB-only, HIV-only or combined TB/HIV. Results: The optimal signature discovered was a 10-gene random forest multinomial signature that robustly discriminated active tuberculosis (TB) from other non-TB disease states with improved performance compared with previously published signatures (AUC: 0.87), and specifically discriminated active TB/HIV co-infection from all other conditions (AUC: 0.88). Signature genes exhibited a variety of transcriptional patterns including both TB-only and HIV-only response genes and genes with expression patterns driven by interactions between HIV and TB infection states, including the CD8+ T-cell receptor LAG3 and the apoptosis-related gene CERKL. Conclusions: By explicitly including distinct disease states within the machine learning analysis framework, we developed a compact and highly diagnostic signature that simultaneously discriminates multiple disease states associated with Mtb/HIV co-infection. Examination of the expression patterns of signature genes suggests mechanisms underlying the unique inflammatory conditions associated with active TB in the presence of HIV. In particular, we observed that dysregulation of CD8+ effector T-cell and NK-cell associated genes may be an important feature of Mtb/HIV co-infection. [ABSTRACT FROM AUTHOR]

A key goal of precision medicine is predicting the best drug therapy for a specific patient from genomic information. In oncology, cancers that appear similar pathologically can vary greatly in how they respond to the same drug. Fortunately, data from high-throughput screening programs often reveal important relationships between genomic variability of cancer cells and their response to drugs. Nevertheless, many current computational methods to predict compound activity against cancer cells require large quantities of genomic, epigenomic, and additional cellular data to develop and to apply. Here we integrate recent screening data and machine learning to train classification models that predict the activity/inactivity of compounds against cancer cells based on the mutational status of only 145 oncogenes and a set of compound structural descriptors. Using IC50 values of 1 μM as activity cutoffs, our predictive models have sensitivities of 87%, specificities of 87%, and yield an area under the receiver operating characteristic curve equal to 0.94. We also develop regression models to predict log(IC50) values of compounds for cancer cells; the models achieve a Pearson correlation coefficient of 0.86 for cross-validation and up to 0.65–0.73 against blind test sets. Predictive performance remains strong when as few as 50 oncogenes are included. Finally, even when 40% of experimental IC50 values are missing from screening data, they can be imputed with sufficient reliability that classification accuracy is not diminished. The presented models are fast to generate and may serve as easily implemented screening tools for personalized oncology medicine, drug repurposing, and drug discovery. [ABSTRACT FROM AUTHOR]

Simulator imperfection, often known as model error, is ubiquitous in practical data assimilation problems. Despite the enormous efforts dedicated to addressing this problem, properly handling simulator imperfection in data assimilation remains to be a challenging task. In this work, we propose an approach to dealing with simulator imperfection from a point of view of functional approximation that can be implemented through a certain machine learning method, such as kernel-based learning adopted in the current work. To this end, we start from considering a class of supervised learning problems, and then identify similarities between supervised learning and variational data assimilation. These similarities found the basis for us to develop an ensemble-based learning framework to tackle supervised learning problems, while achieving various advantages of ensemble-based methods over the variational ones. After establishing the ensemble-based learning framework, we proceed to investigate the integration of ensemble-based learning into an ensemble-based data assimilation framework to handle simulator imperfection. In the course of our investigations, we also develop a strategy to tackle the issue of multi-modality in supervised-learning problems, and transfer this strategy to data assimilation problems to help improve assimilation performance. For demonstration, we apply the ensemble-based learning framework and the integrated, ensemble-based data assimilation framework to a supervised learning problem and a data assimilation problem with an imperfect forward simulator, respectively. The experiment results indicate that both frameworks achieve good performance in relevant case studies, and that functional approximation through machine learning may serve as a viable way to account for simulator imperfection in data assimilation problems. [ABSTRACT FROM AUTHOR]

The article offers information on the challenging scientific problems faced by humanity. Topics discussed include information on the efforts to empower Africans to join the global neuroscience community; discussions on the BRAIN initiative in the U.S. and the Human Brain Project in Europe; and the information on the limiting factor for computational neuroscience development in Africa.

Omic data analysis is steadily growing as a driver of basic and applied molecular biology research. Core to the interpretation of complex and heterogeneous biological phenotypes are computational approaches in the fields of statistics and machine learning. In parallel, constraint-based metabolic modeling has established itself as the main tool to investigate large-scale relationships between genotype, phenotype, and environment. The development and application of these methodological frameworks have occurred independently for the most part, whereas the potential of their integration for biological, biomedical, and biotechnological research is less known. Here, we describe how machine learning and constraint-based modeling can be combined, reviewing recent works at the intersection of both domains and discussing the mathematical and practical aspects involved. We overlap systematic classifications from both frameworks, making them accessible to nonexperts. Finally, we delineate potential future scenarios, propose new joint theoretical frameworks, and suggest concrete points of investigation for this joint subfield. A multiview approach merging experimental and knowledge-driven omic data through machine learning methods can incorporate key mechanistic information in an otherwise biologically-agnostic learning process. [ABSTRACT FROM AUTHOR]

Alzheimer's disease and related dementias (ADRD) are highly prevalent conditions, and prior efforts to develop predictive models have relied on demographic and clinical risk factors using traditional logistical regression methods. We hypothesized that machine-learning algorithms using administrative claims data may represent a novel approach to predicting ADRD. Using a national de-identified dataset of more than 125 million patients including over 10,000 clinical, pharmaceutical, and demographic variables, we developed a cohort to train a machine learning model to predict ADRD 4–5 years in advance. The Lasso algorithm selected a 50-variable model with an area under the curve (AUC) of 0.693. Top diagnosis codes in the model were memory loss (780.93), Parkinson’s disease (332.0), mild cognitive impairment (331.83) and bipolar disorder (296.80), and top pharmacy codes were psychoactive drugs. Machine learning algorithms can rapidly develop predictive models for ADRD with massive datasets, without requiring hypothesis-driven feature engineering. [ABSTRACT FROM AUTHOR]

Microbial communities are ubiquitous and often influence macroscopic properties of the ecosystems they inhabit. However, deciphering the functional relationship between specific microbes and ecosystem properties is an ongoing challenge owing to the complexity of the communities. This challenge can be addressed, in part, by integrating the advances in DNA sequencing technology with computational approaches like machine learning. Although machine learning techniques have been applied to microbiome data, use of these techniques remains rare, and user-friendly platforms to implement such techniques are not widely available. We developed a tool that implements neural network and random forest models to perform regression and feature selection tasks on microbiome data. In this study, we applied the tool to analyze soil microbiome (16S rRNA gene profiles) and dissolved organic carbon (DOC) data from a 44-day plant litter decomposition experiment. The microbiome data includes 1709 total bacterial operational taxonomic units (OTU) from 300+ microcosms. Regression analysis of predicted and actual DOC for a held-out test set of 51 samples yield Pearson’s correlation coefficients of.636 and.676 for neural network and random forest approaches, respectively. Important taxa identified by the machine learning techniques are compared to results from a standard tool (indicator species analysis) widely used by microbial ecologists. Of 1709 bacterial taxa, indicator species analysis identified 285 taxa as significant determinants of DOC concentration. Of the top 285 ranked features determined by machine learning methods, a subset of 86 taxa are common to all feature selection techniques. Using this subset of features, prediction results for random permutations of the data set are at least equally accurate compared to predictions determined using the entire feature set. Our results suggest that integration of multiple methods can aid identification of a robust subset of taxa within complex communities that may drive specific functional outcomes of interest. [ABSTRACT FROM AUTHOR]

Optical coherence tomography (OCT) based measurements of retinal layer thickness, such as the retinal nerve fibre layer (RNFL) and the ganglion cell with inner plexiform layer (GCIPL) are commonly employed for the diagnosis and monitoring of glaucoma. Previously, machine learning techniques have relied on segmentation-based imaging features such as the peripapillary RNFL thickness and the cup-to-disc ratio. Here, we propose a deep learning technique that classifies eyes as healthy or glaucomatous directly from raw, unsegmented OCT volumes of the optic nerve head (ONH) using a 3D Convolutional Neural Network (CNN). We compared the accuracy of this technique with various feature-based machine learning algorithms and demonstrated the superiority of the proposed deep learning based method. Logistic regression was found to be the best performing classical machine learning technique with an AUC of 0.89. In direct comparison, the deep learning approach achieved a substantially higher AUC of 0.94 with the additional advantage of providing insight into which regions of an OCT volume are important for glaucoma detection. Computing Class Activation Maps (CAM), we found that the CNN identified neuroretinal rim and optic disc cupping as well as the lamina cribrosa (LC) and its surrounding areas as the regions significantly associated with the glaucoma classification. These regions anatomically correspond to the well established and commonly used clinical markers for glaucoma diagnosis such as increased cup volume, cup diameter, and neuroretinal rim thinning at the superior and inferior segments. [ABSTRACT FROM AUTHOR]

Patterns of spatial behavior dictate how we use our infrastructure, encounter other people, or are exposed to services and opportunities. Understanding these patterns through the analysis of data commonly available through commodity smartphones has become an important arena for innovation in both academia and industry. The resulting datasets can quickly become massive, indicating the need for concise understanding of the scope of the data collected. Some data is obviously correlated (for example GPS location and which WiFi routers are seen). Codifying the extent of these correlations could identify potential new models, provide guidance on the amount of data to collect, and even provide actionable features. However, identifying correlations, or even the extent of correlation, is difficult because the form of the correlation must be specified. Fractal-based intrinsic dimensionality directly calculates the minimum number of dimensions required to represent a dataset. We provide an intrinsic dimensionality analysis of four smartphone datasets over seven input dimensions, and empirically demonstrate an intrinsic dimension of approximately two. [ABSTRACT FROM AUTHOR]

Many complex physical systems exhibit a rich variety of discrete behavioural modes. Often, the system complexity limits the applicability of standard modelling tools. Hence, understanding the underlying physics of different behaviours and distinguishing between them is challenging. Although traditional machine learning techniques could predict and classify behaviour well, typically they do not provide any meaningful insight into the underlying physics of the system. In this paper we present a novel method for extracting physically meaningful clusters of discrete behaviour from limited experimental observations. This method obtains a set of physically plausible functions that both facilitate behavioural clustering and aid in system understanding. We demonstrate the approach on the V-shaped falling paper system, a new falling paper type system that exhibits four distinct behavioural modes depending on a few morphological parameters. Using just 49 experimental observations, the method discovered a set of candidate functions that distinguish behaviours with an error of 2.04%, while also aiding insight into the physical phenomena driving each behaviour. [ABSTRACT FROM AUTHOR]

As a promising research direction in recent decades, active learning allows an oracle to assign labels to typical examples for performance improvement in learning systems. Existing works mainly focus on designing criteria for screening examples of high value to be labeled in a handcrafted manner. Instead of manually developing strategies of querying the user to access labels for the desired examples, we utilized the reinforcement learning algorithm parameterized with the neural network to automatically explore query strategies in active learning when addressing stream-based one-shot classification problems. With the involvement of cross-entropy in the loss function of Q-learning, an efficient policy to decide when and where to predict or query an instance is learned through the developed framework. Compared with a former influential work, the advantages of our method are demonstrated experimentally with two image classification tasks, and it exhibited better performance, quick convergence, relatively good stability and fewer requests for labels. [ABSTRACT FROM AUTHOR]

A brain-computer interface (BCI), based on motor imagery EEG, uses information extracted from the electroencephalography signals generated by a person who intends to perform any action. One of the most important issues of current research is how to detect automatically whether the user intends to send some message to a certain device. This study presents a proposal, based on a hierarchical structured system, for recognising intentional and non-intentional mental tasks on a BCI system by applying machine learning techniques to the EEG signals. First-level clustering is performed to distinguish between intentional control (IC) and non-intentional control (NC) state patterns. Then, the patterns recognised as IC are passed on to a second stage where supervised learning techniques are used to classify them. In BCI applications, it is critical to correctly classify NC states with a low false positive rate (FPR) to avoid undesirable effects. According to the literature, we selected a maximum FPR of 10%. Under these conditions, our proposal achieved an average test accuracy of 66.6%, with an 8.2% FPR, for the BCI competition IIIa dataset. The main contribution of this paper is the hierarchical approach, based on machine learning paradigms, which performs intentional and non-intentional discrimination and, depending on the case, classifies the intended command selected by the user. [ABSTRACT FROM AUTHOR]

Freely-available satellite data streams and the ability to process these data on cloud-computing platforms such as Google Earth Engine have made frequent, large-scale landcover mapping at high resolution a real possibility. In this paper we apply these technologies, along with machine learning, to the mapping of peatlands–a landcover class that is critical for preserving biodiversity, helping to address climate change impacts, and providing ecosystem services, e.g., carbon storage–in the Boreal Forest Natural Region of Alberta, Canada. We outline a data-driven, scientific framework that: compiles large amounts of Earth observation data sets (radar, optical, and LiDAR); examines the extracted variables for suitability in peatland modelling; optimizes model parameterization; and finally, predicts peatland occurrence across a large boreal area (397, 958 km2) of Alberta at 10 m spatial resolution (equalling 3.9 billion pixels across Alberta). The resulting peatland occurrence model shows an accuracy of 87% and a kappa statistic of 0.57 when compared to our validation data set. Differentiating peatlands from mineral wetlands achieved an accuracy of 69% and kappa statistic of 0.37. This data-driven approach is applicable at large geopolitical scales (e.g., provincial, national) for wetland and landcover inventories that support long-term, responsible resource management. [ABSTRACT FROM AUTHOR]

The study shows the feasibility of predicting firms’ expenditures in innovation, as reported in the Community Innovation Survey, applying a supervised machine-learning approach on a sample of Italian firms. Using an integrated dataset of administrative records and balance sheet data, designed to include all informative variables related to innovation but also easily accessible for most of the cohort, random forest algorithm is implemented to obtain a classification model aimed to identify firms that are potential innovation performers. The performance of the classifier, estimated in terms of AUC, is 0.794. Although innovation investments do not always result in patenting, the model is able to identify 71.92% of firms with patents. More encouraging results emerge from the analysis of the inner working of the model: predictors identified as most important—such as firm size, sector belonging and investment in intangible assets—confirm previous findings of literature, but in a completely different framework. The outcomes of this study are considered relevant for both economic analysts, because it demonstrates the potential of data-driven models for understanding the nature of innovation behaviour, and practitioners, such as policymakers or venture capitalists, who can benefit by evidence-based tools in the decision-making process. [ABSTRACT FROM AUTHOR]

Non-negative matrix tri-factorization (NMTF) is a popular technique for learning low-dimensional feature representation of relational data. Currently, NMTF learns a representation of a dataset through an optimization procedure that typically uses multiplicative update rules. This procedure has had limited success, and its failure cases have not been well understood. We here perform an empirical study involving six large datasets comparing multiplicative update rules with three alternative optimization methods, including alternating least squares, projected gradients, and coordinate descent. We find that methods based on projected gradients and coordinate descent converge up to twenty-four times faster than multiplicative update rules. Furthermore, alternating least squares method can quickly train NMTF models on sparse datasets but often fails on dense datasets. Coordinate descent-based NMTF converges up to sixteen times faster compared to well-established methods. [ABSTRACT FROM AUTHOR]

Cell segmentation in microscopy is a challenging problem, since cells are often asymmetric and densely packed. Successful cell segmentation algorithms rely identifying seed points, and are highly sensitive to variablility in cell size. In this paper, we present an efficient and highly parallel formulation for symmetric three-dimensional contour evolution that extends previous work on fast two-dimensional snakes. We provide a formulation for optimization on 3D images, as well as a strategy for accelerating computation on consumer graphics hardware. The proposed software takes advantage of Monte-Carlo sampling schemes in order to speed up convergence and reduce thread divergence. Experimental results show that this method provides superior performance for large 2D and 3D cell localization tasks when compared to existing methods on large 3D brain images. [ABSTRACT FROM AUTHOR]

Kernel regression models have been used as non-parametric methods for fitting experimental data. However, due to their non-parametric nature, they belong to the so-called “black box” models, indicating that the relation between the input variables and the output, depending on the kernel selection, is unknown. In this paper we propose a new methodology to retrieve the relation between each input regressor variable and the output in a least squares support vector machine (LS-SVM) regression model. The method is based on oblique subspace projectors (ObSP), which allows to decouple the influence of input regressors on the output by including the undesired variables in the null space of the projection matrix. Such functional relations are represented by the nonlinear transformation of the input regressors, and their subspaces are estimated using appropriate kernel evaluations. We exploit the properties of ObSP in order to decompose the output of the obtained regression model as a sum of the partial nonlinear contributions and interaction effects of the input variables, we called this methodology Nonlinear ObSP (NObSP). We compare the performance of the proposed algorithm with the component selection and smooth operator (COSSO) for smoothing spline ANOVA models. We use as benchmark 2 toy examples and a real life regression model using the concrete strength dataset from the UCI machine learning repository. We showed that NObSP is able to outperform COSSO, producing stable estimations of the functional relations between the input regressors and the output, without the use of prior-knowledge. This methodology can be used in order to understand the functional relations between the inputs and the output in a regression model, retrieving the physical interpretation of the regression models. [ABSTRACT FROM AUTHOR]

We have attempted to reproduce the results in Development and validation of a deep learning algorithm for detection of diabetic retinopathy in retinal fundus photographs, published in JAMA 2016; 316(22), using publicly available data sets. We re-implemented the main method in the original study since the source code is not available. The original study used non-public fundus images from EyePACS and three hospitals in India for training. We used a different EyePACS data set from Kaggle. The original study used the benchmark data set Messidor-2 to evaluate the algorithm's performance. We used another distribution of the Messidor-2 data set, since the original data set is no longer available. In the original study, ophthalmologists re-graded all images for diabetic retinopathy, macular edema, and image gradability. We have one diabetic retinopathy grade per image for our data sets, and we assessed image gradability ourselves. We were not able to reproduce the original study's results with publicly available data. Our algorithm's area under the receiver operating characteristic curve (AUC) of 0.951 (95% CI, 0.947-0.956) on the Kaggle EyePACS test set and 0.853 (95% CI, 0.835-0.871) on Messidor-2 did not come close to the reported AUC of 0.99 on both test sets in the original study. This may be caused by the use of a single grade per image, or different data. This study shows the challenges of reproducing deep learning method results, and the need for more replication and reproduction studies to validate deep learning methods, especially for medical image analysis. Our source code and instructions are available at: . [ABSTRACT FROM AUTHOR]

Genomic imprinting results in monoallelic expression of genes in mammals and flowering plants. Understanding the function of imprinted genes improves our knowledge of the regulatory processes in the genome. In this study, we have employed classification and clustering algorithms with attribute weighting to specify the unique attributes of both imprinted (monoallelic) and biallelic expressed genes. We have obtained characteristics of 22 known monoallelically expressed (imprinted) and 8 biallelic expressed genes that have been experimentally validated alongside 208 randomly selected genes in bovine (Bos taurus). Attribute weighting methods and various supervised and unsupervised algorithms in machine learning were applied. Unique characteristics were discovered and used to distinguish mono and biallelic expressed genes from each other in bovine. To obtain the accuracy of classification, 10-fold cross-validation with concerning each combination of attribute weighting (feature selection) and machine learning algorithms, was used. Our approach was able to accurately predict mono and biallelic genes using the genomics and proteomics attributes. [ABSTRACT FROM AUTHOR]

With the prosperity of machine learning and cloud computing, meaningful information can be mined from mass electronic medical data which help physicians make proper disease diagnosis for patients. However, using medical data and disease information of patients frequently raise privacy concerns. In this paper, based on single-layer perceptron, we propose a scheme of privacy-preserving clinical decision with cloud support (PPCD), which securely conducts disease model training and prediction for the patient. Each party learns nothing about the other’s private information. In PPCD, a lightweight secure multiplication is presented and introduced to improve the model training. Security analysis and experimental results on real data confirm the high accuracy of disease prediction achieved by the proposed PPCD without the risk of privacy disclosure. [ABSTRACT FROM AUTHOR]

Clinical resistance against Bedaquiline, the first new anti-tuberculosis compound with a novel mechanism of action in over 40 years, has already been detected in Mycobacterium tuberculosis. As a new drug, however, there is currently insufficient clinical data to facilitate reliable and timely identification of genomic determinants of resistance. Here we investigate the structural basis for M. tuberculosis associated bedaquiline resistance in the drug target, AtpE. Together with the 9 previously identified resistance-associated variants in AtpE, 54 non-resistance-associated mutations were identified through comparisons of bedaquiline susceptibility across 23 different mycobacterial species. Computational analysis of the structural and functional consequences of these variants revealed that resistance associated variants were mainly localized at the drug binding site, disrupting key interactions with bedaquiline leading to reduced binding affinity. This was used to train a supervised predictive algorithm, which accurately identified likely resistance mutations (93.3% accuracy). Application of this model to circulating variants present in the Asia-Pacific region suggests that current circulating variants are likely to be susceptible to bedaquiline. We have made this model freely available through a user-friendly web interface called SUSPECT-BDQ, StrUctural Susceptibility PrEdiCTion for bedaquiline (). This tool could be useful for the rapid characterization of novel clinical variants, to help guide the effective use of bedaquiline, and to minimize the spread of clinical resistance. [ABSTRACT FROM AUTHOR]

The performance of data clustering algorithms is mainly dependent on their ability to balance between the exploration and exploitation of the search process. Although some data clustering algorithms have achieved reasonable quality solutions for some datasets, their performance across real-life datasets could be improved. This paper proposes an adaptive memetic differential evolution optimisation algorithm (AMADE) for addressing data clustering problems. The memetic algorithm (MA) employs an adaptive differential evolution (DE) mutation strategy, which can offer superior mutation performance across many combinatorial and continuous problem domains. By hybridising an adaptive DE mutation operator with the MA, we propose that it can lead to faster convergence and better balance the exploration and exploitation of the search. We would also expect that the performance of AMADE to be better than MA and DE if executed separately. Our experimental results, based on several real-life benchmark datasets, shows that AMADE outperformed other compared clustering algorithms when compared using statistical analysis. We conclude that the hybridisation of MA and the adaptive DE is a suitable approach for addressing data clustering problems and can improve the balance between global exploration and local exploitation of the optimisation algorithm. [ABSTRACT FROM AUTHOR]

DIBR-3D technology has evolved over the past few years with the demands of consumers increasing in recent times for future free-view 3D videos on their home televisions. The main issue in 3D technology is the lack of 3D content available to watch using the traditional TV systems. Although, some sophisticated devices like stereoscopic cameras have been used to fill the gap between the 3D content demand and 3D content supply. But the content generated through these sophisticated devices can not be displayed on the traditional TV systems, so there needs to be some mechanism which is inline with the traditional TV. Furthermore, the huge collection of existing 2D content should be converted to 3D using depth image-based rendering techniques. This conversion technique can highly contribute in overcoming the shortage problem of the 3D content. This paper presents a novel approach for converting 2D degraded image for DIBR 3D-TV view. This degraded or noisy/blur image is enhanced through image dehazing and Directional Filter Bank (DFB). This enhancement is necessary because of the occlusion effect or hole filling problem that occurs due to imperfect depth map. The enhanced image is then segmented into the foreground image and the background image. After the segmentation, the depth map is generated using image profiles. Moreover, Stereoscopic images are finally produced using the DIBR procedure which is based on the 2D input image and the corresponding depth map. We have verified the results of the proposed approach by comparing the results with the existing state-of-the-art techniques. [ABSTRACT FROM AUTHOR]

As the challenge of mental health problems such as anxiety and depression increasing today, more convenient, objective, real-time assessing techniques of mental state are in need. The Microsoft Kinect camera is a possible option for contactlessly capturing human gait, which could reflect the walkers’ mental state. So we tried to propose a novel method for monitoring individual’s anxiety and depression based on the Kinect-recorded gait pattern. In this study, after finishing the 7-item Generalized Anxiety Disorder Scale (GAD-7) and the 9-item Patient Health Questionnaire (PHQ-9), 179 participants were required to walked on the footpath naturally while shot by the Kinect cameras. Fast Fourier Transforms (FFT) were conducted to extract features from the Kinect-captured gait data after preprocessing, and different machine learning algorithms were used to train the regression models recognizing anxiety and depression levels, and the classification models detecting the cases with specific depressive symptoms. The predictive accuracies of the regression models achieved medium to large level: The correlation coefficient between predicted and questionnaire scores reached 0.51 on anxiety (by epsilon-Support Vector Regression, e-SVR) and 0.51 on depression (by Gaussian Processes, GP). The predictive accuracies could be even higher, 0.74 on anxiety (by GP) and 0.64 on depression (by GP), while training and testing the models on the female sample. The classification models also showed effectiveness on detecting the cases with some symptoms. These results demonstrate the possibility to recognize individual’s questionnaire measured anxiety/depression levels and some depressive symptoms based on Kinect-recorded gait data through machine learning method. This approach shows the potential to develop non-intrusive, low-cost methods for monitoring individuals’ mental health in real time. [ABSTRACT FROM AUTHOR]

Early defibrillation by an automated external defibrillator (AED) is key for the survival of out-of-hospital cardiac arrest (OHCA) patients. ECG feature extraction and machine learning have been successfully used to detect ventricular fibrillation (VF) in AED shock decision algorithms. Recently, deep learning architectures based on 1D Convolutional Neural Networks (CNN) have been proposed for this task. This study introduces a deep learning architecture based on 1D-CNN layers and a Long Short-Term Memory (LSTM) network for the detection of VF. Two datasets were used, one from public repositories of Holter recordings captured at the onset of the arrhythmia, and a second from OHCA patients obtained minutes after the onset of the arrest. Data was partitioned patient-wise into training (80%) to design the classifiers, and test (20%) to report the results. The proposed architecture was compared to 1D-CNN only deep learners, and to a classical approach based on VF-detection features and a support vector machine (SVM) classifier. The algorithms were evaluated in terms of balanced accuracy (BAC), the unweighted mean of the sensitivity (Se) and specificity (Sp). The BAC, Se, and Sp of the architecture for 4-s ECG segments was 99.3%, 99.7%, and 98.9% for the public data, and 98.0%, 99.2%, and 96.7% for OHCA data. The proposed architecture outperformed all other classifiers by at least 0.3-points in BAC in the public data, and by 2.2-points in the OHCA data. The architecture met the 95% Sp and 90% Se requirements of the American Heart Association in both datasets for segment lengths as short as 3-s. This is, to the best of our knowledge, the most accurate VF detection algorithm to date, especially on OHCA data, and it would enable an accurate shock no shock diagnosis in a very short time. [ABSTRACT FROM AUTHOR]

The Text Forum Threads (TFThs) contain a large amount of Initial-Posts Replies pairs (IPR pairs) which are related to information exchange and discussion amongst the forum users with similar interests. Generally, some user replies in the discussion thread are off-topic and irrelevant. Hence, the content is of different qualities. It is important to identify the quality of the IPR pairs in a discussion thread in order to extract relevant information and helpful replies because a higher frequency of irrelevant replies in the thread could take the discussion in a different direction and the genuine users would lose interest in this discussion thread. In this study, the authors have presented an approach for identifying the high-quality user replies to the Initial-Post and use some quality dimensions features for their extraction. Moreover, crowdsourcing platforms were used for judging the quality of the replies and classified them into high-quality, low-quality or non-quality replies to the Initial-Posts. Then, the high-quality IPR pairs were extracted and identified based on their quality, and they were ranked using three classifiers i.e., Support Vector Machine, Naïve Bayes, and the Decision Trees according to their quality dimensions of relevancy, author activeness, timeliness, ease-of-understanding, politeness, and amount-of-data. In conclusion, the experimental results for the TFThs showed that the proposed approach could improve the extraction of the quality replies and identify the quality features that can be used for the Text Forum Thread Summarization. [ABSTRACT FROM AUTHOR]

This paper proposes a new quantum-like method for the binary classification applied to classical datasets. Inspired by the quantum Helstrom measurement, this innovative approach has enabled us to define a new classifier, called Helstrom Quantum Centroid (HQC). This binary classifier (inspired by the concept of distinguishability between quantum states) acts on density matrices—called density patterns—that are the quantum encoding of classical patterns of a dataset. In this paper we compare the performance of HQC with respect to twelve standard (linear and non-linear) classifiers over fourteen different datasets. The experimental results show that HQC outperforms the other classifiers when compared to the Balanced Accuracy and other statistical measures. Finally, we show that the performance of our classifier is positively correlated to the increase in the number of “quantum copies” of a pattern and the resulting tensor product thereof. [ABSTRACT FROM AUTHOR]

Electroencephalogram (EEG) is a common base signal used to monitor brain activities and diagnose sleep disorders. Manual sleep stage scoring is a time-consuming task for sleep experts and is limited by inter-rater reliability. In this paper, we propose an automatic sleep stage annotation method called SleepEEGNet using a single-channel EEG signal. The SleepEEGNet is composed of deep convolutional neural networks (CNNs) to extract time-invariant features, frequency information, and a sequence to sequence model to capture the complex and long short-term context dependencies between sleep epochs and scores. In addition, to reduce the effect of the class imbalance problem presented in the available sleep datasets, we applied novel loss functions to have an equal misclassified error for each sleep stage while training the network. We evaluated the performance of the proposed method on different single-EEG channels (i.e., Fpz-Cz and Pz-Oz EEG channels) from the Physionet Sleep-EDF datasets published in 2013 and 2018. The evaluation results demonstrate that the proposed method achieved the best annotation performance compared to current literature, with an overall accuracy of 84.26%, a macro F1-score of 79.66% and κ = 0.79. Our developed model can be applied to other sleep EEG signals and aid the sleep specialists to arrive at an accurate diagnosis. The source code is available at . [ABSTRACT FROM AUTHOR]