Search

The protection system is crucial for grid stability and safeguarding essential components, including generators, transformers, transmission systems, and power connections. The smart grid system increases the flexibility and complexity of the power system, making fault detection and isolation the primary challenges for the protection system. This paper presents an optimal protection solution using an adaptive electronic relay to enhance reliability and enable self-healing. The proposed protection algorithm quickly detects faults and automatically isolates them from the rest of the healthy system in 25ms. The relay operation algorithm has been validated using MATLAB SIMULINK software. The results confirm the effectiveness of the proposed smart electronic relay in various sections of the smart grid system, including transformers, transmission and distribution., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Nasrallah et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

There are many problems related to the use of machine learning and machine vision technology on a commercial scale for cutting sugarcane seeds. These obstacles are related to complex systems and the way the farmers operate them, the possibility of damage to the buds during the cleaning process, and the high cost of such technology. In order to address these issues, a set of RGB color sensors was used to develop an automated sugarcane seed cutting machine (ASSCM) capable of identifying the buds that had been manually marked with a unique color and then cutting them mechanically, and the sugarcane seed exit chute was provided with a sugarcane seed monitoring unit. The machine's performance was evaluated by measuring the damage index at sugarcane stalk diameters of 2.03, 2.72, 3.42, and 3.94 cm. where two different types of rotary saw knives had the same diameter of 7.0 in/180 mm the two knives had 30 and 80 teeth, also we used five cutting times of 1000, 1500, 2000, 2500, and 3000 ms. All tests were done at a fixed cutting speed of 12000 rpm. In addition, the machine's performance was evaluated by conducting an economic analysis. The obtained results showed that the most damage index values were less than 0.00 for all cutting times and sugarcane stalk diameters under testing, while the DI values were equal zero (partial damage) for sugarcane stalk diameter of 3.42 cm at cutting times of 2000 ms and 2500 ms, in addition to the DI values being equal zero (extreme damage) for sugarcane stalk diameter of 3.94 cm at cutting times of 1500 ms and 2000 ms. The economic analysis showed that the total cost of sugarcane seeds per hectare is 70.865 USD. In addition, the ASSCM can pay for itself in a short period of time. The payback time is 0.536 years, which means that the ASSCM will save enough money to pay for itself in about 6.43 months. Finally, we suggest using a rotary saw knife with 80 teeth and a cutting time of 2000 ms to cut sugarcane stacks with an average diameter of 2.72 cm. This will result in higher performance and lower operating costs for the ASSCM., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Elwakeel et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

There has been a lack of a satisfactory solution for identifying and locating evolving faults in unbalanced distribution systems. The proposed approach is based on the cross-correlation technique as a key element for fault detection and location. Evolving faults, in this context, refer to two sequential faults that result in a change of fault phase. The captured QRS value reflects the occurrence of the second fault occurrence. In order to identify Evolving Faults, it makes use of the signal that is currently being monitored at any given point in the network. Typical system occurrences, such as a short circuit fault that grew into another short circuit fault, as well as cross-country faults, are simulated, and according to the suggested technique, they are accurately differentiated from one another. Using a real-time simulator, rigorous simulations are performed on the modified IEEE 240 bus distribution system. The results of these simulations reveal that they have the potential to uncover defects that are constantly changing. Regardless of the fault (location\resistance\inception angle), location of the monitored point, or sample frequency that is selected, the suggested approach is unaffected by any of these factors. In addition, the slime mold optimization approach is utilized in order to get the best monitoring points that accurately identify the bus in which the evolving fault has taken place., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Krishna Ponukumati et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Diesel engines (DEs) commonly power pumps used in agricultural and grassland irrigation. However, relying on unpredictable and costly fuel sources for DEs pose's challenges related to availability, reliability, maintenance, and lifespan. Addressing these environmental concerns, this study introduces an emulation approach for photovoltaic (PV) water pumping (WP) systems. Emulation offers a promising alternative due to financial constraints, spatial limitations, and climate dependency in full-scale systems. The proposed setup includes three key elements: a PV system emulator employing back converter control to replicate PV panel characteristics, a boost converter with an MPPT algorithm for efficient power tracking across diverse conditions, and a motor pump (MP) emulator integrating an induction motor connected to a DC generator to simulate water pump behaviors. Precise induction motor control is achieved through a controlled inverter. This work innovatively combines PV and WP emulation while optimizing system dynamics, aiming to develop a comprehensive emulator and evaluate an enhanced control algorithm. An optimized scalar control strategy regulates the water MP, demonstrated through MATLAB/Simulink simulations that highlight superior performance and responsiveness to solar irradiation variations compared to conventional MPPT techniques. Experimental validation using the dSPACE control desk DS1104 confirms the emulator's ability to faithfully reproduce genuine solar panel characteristics., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Fatah et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Nuclear energy (NE) is seen as a reliable choice for ensuring the security of the world's energy supply, and it has only lately begun to be advocated as a strategy for reducing climate change in order to meet low-carbon energy transition goals. To achieve flexible operation across a wide operating range when it participates in peak regulation in the power systems, the pressurised water reactor (PWR) NE systems must overcome the nonlinearity problem induced by the substantial variation. In light of this viewpoint, the objective of this work is to evaluate the reactor core (main component) of the NE system via different recent optimization techniques. The PWR, which is the most common form, is the reactor under investigation. For controlling the movement of control rods that correspond with reactivity for power regulation the PWR, PID controller is employed. This study presents a dynamic model of the PWR, which includes the reactor core, the upper and lower plenums, and the piping that connects the reactor core to the steam alternator is analyzed and investigated. The PWR dynamic model is controlled by a PID controller optimized by the gold rush optimizer (GRO) built on the integration of the time-weighted square error performance indicator. Additionally, to exhibit the efficacy of the presented GRO, the dragonfly approach, Arithmetic algorithm, and planet optimization algorithm are used to adjust the PID controller parameters. Furthermore, a comparison among the optimized PID gains with the applied algorithms shows great accuracy, efficacy, and effectiveness of the proposed GRO. MATLAB\ Simulink program is used to model and simulate the system components and the applied algorithms. The simulation findings demonstrate that the suggested optimized PID control strategy has superior efficiency and resilience in terms of less overshoot and settling time., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Abdelfattah et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)