Search

Direct seeding has been widely adopted as an economical and labor-saving technique in rice production, though problems such as low seedling emergence rate, emergence irregularity and poor lodging resistance are existing. These problems are currently partially overcome by increasing seeding rate, however it is not acceptable for hybrid rice due to the high seed cost. Improving direct seeding by breeding is seen as the ultimate solution to these problems. For hybrid breeding, identifying superior hybrids among a massive number of hybrids from crossings between male and female parental populations by phenotypic evaluation is tedious and costly. Contrastingly, genomic selection/prediction (GS/GP) could efficiently detect the superior hybrids capitalizing on genomic data, which holds a great potential in plant hybrids breeding. In this study, we utilized 402 rice inbred varieties and 401 hybrids to investigate the effectiveness of GS on rice mesocotyl length, a representative indicative trait of direct seeding suitability. Several GP methods and training set designs were studied to seek the optimal scenario of hybrid prediction. It was shown that using half-sib hybrids as training set with the phenotypes of all parental lines being fitted as a covariate could optimally predict mesocotyl length. Partitioning the molecular markers into trait-associated and -unassociated groups based on genome-wide association study using all parental lines and hybrids could further improve the prediction accuracy. This study indicates that GS could be an effective and efficient method for hybrid breeding for rice direct seeding. [ABSTRACT FROM AUTHOR]

As rice is an important staple food globally, research for development and enhancement of its nutritional value it is an imperative task. Identification of nutrient enriched rice germplasm and exploiting them for breeding programme is the easiest way to develop better quality rice. In this study, we analyzed 113 aromatic rice germplasm in order to identify quantitative trait loci (QTL) underpinning nutrition components and determined by measuring the normal frequency distribution for Fe, Zn, amylose, and protein content in those rice germplasm. Comparatively, the germplasm Radhuni pagal, Kalobakri, Thakurbhog (26.6 ppm) and Hatisail exhibited the highest mean values for Fe (16.9 ppm), Zn (34.1 ppm), amylose (26.6 ppm) and protein content (11.0 ppm), respectively. Moreover, a significant linear relationship (R2 = 0.693) was observed between Fe and Zn contents. Cluster analysis based on Mahalanobis D2 distances revealed four major clusters of 113 rice germplasm, with cluster III containing a maximum 37 germplasm and a maximum inter-cluster distance between clusters III and IV. The 45 polymorphic SSRs and four trait associations exhibited eight significant quantitative trait loci (QTL) located on eight different chromosomes using composite interval mapping (CIM). The highly significant QTL (variance 7.89%, LOD 2.02) for protein content (QTL.pro.1) was observed on chromosome 1 at 94.9cM position. Also, four QTLs for amylose content were observed with the highly significant QTL.amy.8 located on chromosome 8 exhibiting 7.2% variance with LOD 1.83. Only one QTL (QTL.Fe.9) for Fe content was located on chromosome 9 (LOD 1.24), and two (QTL.Zn.4 and QTL.Zn.5) for Zn on chromosome 4 (LOD 1.71) and 5 (LOD 1.18), respectively. Overall, germplasm from clusters III and IV might offer higher heterotic response with the identified QTLs playing a significant role in any rice biofortification breeding program and released with development of new varieties. [ABSTRACT FROM AUTHOR]

Rice-crab culture is the characteristic rice ecological breeding model used in the Panjin area of Liaohe River Basin, China, and it can improve the ecological environment and create increased economic benefits. From a food perspective, both rice yield and quality, which are closely related to the fertilization mode, should be considered. However, the effect of different fertilization modes on rice quality has not been comprehensively investigated in this co-culture system. This study investigated the effects of three fertilization modes(FP1, FP2, and OPT) divided according to different fertilization types and methods on rice yield and quality, and set up a non-fertilized control group. In the rice-crab culture system, FP2 used fewer fertilizers and had a lower economic cost, and the yield was only slightly less than that of OPT(highest yield) but there was no statistical difference. FP2 elicited the best appearance quality and better cooking and eating quality among all treatment modes. Compared with CK, three fertilization modes significantly increased the protein content in rice and decreased the amylose content, which would lead to the deterioration of rice eating quality. However FP2 had the least protein increase and the least amylose reduction. There was no significant change in crude fat and starch content. Therefore, the FP2 fertilization mode was the best choice for the rice-crab culture system, as it significantly improved rice yield and increased rice quality at a relatively low cost. [ABSTRACT FROM AUTHOR]

A total of 787 non-waxy rice lines– 116 hybrids and 671 inbreds–were used to study the apparent amylose content (AAC), gelatinization temperature (GT), and rapid visco analyzer (RVA) pasting viscosity properties of rice starch to understand their importance in breeding better rice varieties. The investigated traits showed a wide range of diversity for both hybrid (HG) and inbred (IG) groups. The combinations of the different categories of AAC and GT were random in HG but were non-random in IG. For inbred lines, the high level of AAC tended to combine with the low level of GT, the intermediate level of AAC tended to have high or intermediate GT, and the low level of AAC tended to have high or low GT. Some stable correlations of the AAC, GT, and RVA properties may be the results derived from the physicochemical relationships among these traits, which rice breeders could utilize for selection in advanced breeding generations. Through cluster analysis, IG and HG were divided into 52 and 31 sub-clusters, respectively. Identifying the cultivars having AAC, GT, and RVA properties similar to that of popular high-quality rice varieties seems to be an interesting strategy and could be directly used for adaptation trials to breed high-quality rice varieties in targeted areas in a more customized manner. [ABSTRACT FROM AUTHOR]

Background: In this study we carried out a genome-wide association analysis for plant and grain morphology and root architecture in a unique panel of temperate rice accessions adapted to European pedo-climatic conditions. This is the first study to assess the association of selected phenotypic traits to specific genomic regions in the narrow genetic pool of temperate japonica. A set of 391 rice accessions were GBS-genotyped yielding—after data editing—57000 polymorphic and informative SNPS, among which 54% were in genic regions. Results: In total, 42 significant genotype-phenotype associations were detected: 21 for plant morphology traits, 11 for grain quality traits, 10 for root architecture traits. The FDR of detected associations ranged from 3 · 10−7 to 0.92 (median: 0.25). In most cases, the significant detected associations co-localised with QTLs and candidate genes controlling the phenotypic variation of single or multiple traits. The most significant associations were those for flag leaf width on chromosome 4 (FDR = 3 · 10−7) and for plant height on chromosome 6 (FDR = 0.011). Conclusions: We demonstrate the effectiveness and resolution of the developed platform for high-throughput phenotyping, genotyping and GWAS in detecting major QTLs for relevant traits in rice. We identified strong associations that may be used for selection in temperate irrigated rice breeding: e.g. associations for flag leaf width, plant height, root volume and length, grain length, grain width and their ratio. Our findings pave the way to successfully exploit the narrow genetic pool of European temperate rice and to pinpoint the most relevant genetic components contributing to the adaptability and high yield of this germplasm. The generated data could be of direct use in genomic-assisted breeding strategies. [ABSTRACT FROM AUTHOR]

Grain length is an important quantitative trait in rice (Oryza sativa L.) that influences both grain yield and exterior quality. Although many quantitative trait loci (QTLs) for grain length have been identified, it is still unclear how different alleles from different QTLs regulate grain length coordinately. To explore the mechanisms of QTL combination in the determination of grain length, five mapping populations, including two F2 populations, an F3 population, an F7 recombinant inbred line (RIL) population, and an F8 RIL population, were developed from the cross between the U.S. tropical japonica variety ‘Lemont’ and the Chinese indica variety ‘Yangdao 4’ and grown under different environmental conditions. Four QTLs (qGL-3-1, qGL-3-2, qGL-4, and qGL-7) for grain length were detected using both composite interval mapping and multiple interval mapping methods in the mapping populations. In each locus, there was an allele from one parent that increased grain length and another allele from another parent that decreased it. The eight alleles in the four QTLs were analyzed to determine whether these alleles act additively across loci, and lead to a linear relationship between the predicted breeding value of QTLs and phenotype. Linear regression analysis suggested that the combination of eight alleles determined grain length. Plants carrying more grain length-increasing alleles had longer grain length than those carrying more grain length-decreasing alleles. This trend was consistent in all five mapping populations and demonstrated the regulation of grain length by the four QTLs. Thus, these QTLs are ideal resources for modifying grain length in rice. [ABSTRACT FROM AUTHOR]

Grain appearance quality and milling quality are the main determinants of market value of rice. Breeding for improved grain quality is a major objective of rice breeding worldwide. Identification of genes/QTL controlling quality traits is the prerequisite for increasing breeding efficiency through marker-assisted selection. Here, we reported a genome-wide association study in indica rice to identify QTL associated with 10 appearance and milling quality related traits, including grain length, grain width, grain length to width ratio, grain thickness, thousand grain weight, degree of endosperm chalkiness, percentage of grains with chalkiness, brown rice rate, milled rice rate and head milled rice rate. A diversity panel consisting of 272 indica accessions collected worldwide was evaluated in four locations including Hangzhou, Jingzhou, Sanya and Shenzhen representing indica rice production environments in China and genotyped using genotyping-by-sequencing and Diversity Arrays Technology based on next-generation sequencing technique called DArTseq™. A wide range of variation was observed for all traits in all environments. A total of 16 different association analysis models were compared to determine the best model for each trait-environment combination. Association mapping based on 18,824 high quality markers yielded 38 QTL for the 10 traits. Five of the detected QTL corresponded to known genes or fine mapped QTL. Among the 33 novel QTL identified, qDEC1.1 (qGLWR1.1), qBRR2.2 (qGL2.1), qTGW2.1 (qGL2.2), qGW11.1 (qMRR11.1) and qGL7.1 affected multiple traits with relatively large effects and/or were detected in multiple environments. The research provided an insight of the genetic architecture of rice grain quality and important information for mining genes/QTL with large effects within indica accessions for rice breeding. [ABSTRACT FROM AUTHOR]

The North-eastern (NE) India, comprising of Arunachal Pradesh, Assam, Manipur, Meghalaya, Mizoram, Nagaland, Sikkim and Tripura, possess diverse array of locally adapted non-Basmati aromatic germplasm. The germplasm collections from this region could serve as valuable resources in breeding for abiotic stress tolerance, grain yield and cooking/eating quality. To utilize such collections, however, breeders need information about the extent and distribution of genetic diversity present within collections. In this study, we report the result of population genetic analysis of 107 aromatic and quality rice accessions collected from different parts of NE India, as well as classified these accessions in the context of a set of structured global rice cultivars. A total of 322 alleles were amplified by 40 simple sequence repeat (SSR) markers with an average of 8.03 alleles per locus. Average gene diversity was 0.67. Population structure analysis revealed that NE Indian aromatic rice can be subdivided into three genetically distinct population clusters: P1, joha rice accessions from Assam, tai rices from Mizoram and those from Sikkim; P2, chakhao rice germplasm from Manipur; and P3, aromatic rice accessions from Nagaland. Pair-wise FST between three groups varied from 0.223 (P1 vs P2) to 0.453 (P2 vs P3). With reference to the global classification of rice cultivars, two major groups (Indica and Japonica) were identified in NE Indian germplasm. The aromatic accessions from Assam, Manipur and Sikkim were assigned to the Indica group, while the accessions from Nagaland exhibited close association with Japonica. The tai accessions of Mizoram along with few chakhao accessions collected from the hill districts of Manipur were identified as admixed. The results highlight the importance of regional genetic studies for understanding diversification of aromatic rice in India. The data also suggest that there is scope for exploiting the genetic diversity of aromatic and quality rice germplasm of NE India for rice improvement. [ABSTRACT FROM AUTHOR]

With the ever-increasing global demand for high quality rice in both local production regions and with Western consumers, we have a strong desire to understand better the importance of the different traits that make up the quality of the rice grain and obtain a full picture of rice quality demographics. Rice is by no means a ‘one size fits all’ crop. Regional preferences are not only striking, they drive the market and hence are of major economic importance in any rice breeding / improvement strategy. In this analysis, we have engaged local experts across the world to perform a full assessment of all the major rice quality trait characteristics and importantly, to determine how these are combined in the most preferred varieties for each of their regions. Physical as well as biochemical characteristics have been monitored and this has resulted in the identification of no less than 18 quality trait combinations. This complexity immediately reveals the extent of the specificity of consumer preference. Nevertheless, further assessment of these combinations at the variety level reveals that several groups still comprise varieties which consumers can readily identify as being different. This emphasises the shortcomings in the current tools we have available to assess rice quality and raises the issue of how we might correct for this in the future. Only with additional tools and research will we be able to define directed strategies for rice breeding which are able to combine important agronomic features with the demands of local consumers for specific quality attributes and hence, design new, improved crop varieties which will be awarded success in the global market. [ABSTRACT FROM AUTHOR]