Search

The exponential growth of mobile traffic means that operators must upgrade their mobile networks to provide higher capacity to final users. A promising alternative is to deploy heterogeneous networks (HetNets) that combine macro Base Stations (BSs) and SmallCells (SCs), although this increases the complexity and cost of the transport (SCs to Fiber Access Point–FAP). Most of the planning strategies outlined in the literature are aimed at reducing the number of SCs and ignore the impact that the transport segment might have on the total cost of network deployment. In this paper, heuristics are used for the joint planning of radio (i.e., SCs) and transport resources (i.e., point-to-point fiber links). These were compared and examined to determine the advantages and disadvantages of each approach, and in some cases, this led to a 50% reduction in total costs, while still creating a non-scalable network. [ABSTRACT FROM AUTHOR]

Coordination is essential for improving supply chain performance, and one of the most critical factors in achieving the coordination of a supply chain is the integrated research of production and distribution. In this paper, a novel two-stage hybrid solution methodology is proposed. In the first stage, products are processed on the serial machines of multiple manufacturers located in two industrial parks. A fuzzy multi-objective scheduling optimization is performed using a modified non-dominated sorting genetic algorithm II (NSGA-II). The result obtained in the first stage is used in the second stage to optimize the distribution scheduling problem using a modified genetic annealing algorithm (GAA). Finally, simulation results verify both the feasibility and efficiency of the proposed solution methodology. [ABSTRACT FROM AUTHOR]

RNA SHAPE experiments have become important and successful sources of information for RNA structure prediction. In such experiments, chemical reagents are used to probe RNA backbone flexibility at the nucleotide level, which in turn provides information on base pairing and therefore secondary structure. Little is known, however, about the statistics of such SHAPE data. In this work, we explore different representations of noise in SHAPE data and propose a statistically sound framework for extracting reliable reactivity information from multiple SHAPE replicates. Our analyses of RNA SHAPE experiments underscore that a normal noise model is not adequate to represent their data. We propose instead a log-normal representation of noise and discuss its relevance. Under this assumption, we observe that processing simulated SHAPE data by directly averaging different replicates leads to bias. Such bias can be reduced by analyzing the data following a log transformation, either by log-averaging or Kalman filtering. Application of Kalman filtering has the additional advantage that a prior on the nucleotide reactivities can be introduced. We show that the performance of Kalman filtering is then directly dependent on the quality of that prior. We conclude the paper with guidelines on signal processing of RNA SHAPE data. [ABSTRACT FROM AUTHOR]

The presence of motion artefacts in ECG signals can cause misleading interpretation of cardiovascular status. Recently, reducing the motion artefact from ECG signal has gained the interest of many researchers. Due to the overlapping nature of the motion artefact with the ECG signal, it is difficult to reduce motion artefact without distorting the original ECG signal. However, the application of an adaptive noise canceler has shown that it is effective in reducing motion artefacts if the appropriate noise reference that is correlated with the noise in the ECG signal is available. Unfortunately, the noise reference is not always correlated with motion artefact. Consequently, filtering with such a noise reference may lead to contaminating the ECG signal. In this paper, a two-stage filtering motion artefact reduction algorithm is proposed. In the algorithm, two methods are proposed, each of which works in one stage. The weighted adaptive noise filtering method (WAF) is proposed for the first stage. The acceleration derivative is used as motion artefact reference and the Pearson correlation coefficient between acceleration and ECG signal is used as a weighting factor. In the second stage, a recursive Hampel filter-based estimation method (RHFBE) is proposed for estimating the ECG signal segments, based on the spatial correlation of the ECG segment component that is obtained from successive ECG signals. Real-World dataset is used to evaluate the effectiveness of the proposed methods compared to the conventional adaptive filter. The results show a promising enhancement in terms of reducing motion artefacts from the ECG signals recorded by a cost-effective single lead ECG sensor during several activities of different subjects. [ABSTRACT FROM AUTHOR]

Continuous mixture interpretation methods that employ probabilistic genotyping to compute the Likelihood Ratio (LR) utilize more information than threshold-based systems. The continuous interpretation schemes described in the literature, however, do not all use the same underlying probabilistic model and standards outlining which probabilistic models may or may not be implemented into casework do not exist; thus, it is the individual forensic laboratory or expert that decides which model and corresponding software program to implement. For countries, such as the United States, with an adversarial legal system, one can envision a scenario where two probabilistic models are used to present the weight of evidence, and two LRs are presented by two experts. Conversely, if no independent review of the evidence is requested, one expert using one model may present one LR as there is no standard or guideline requiring the uncertainty in the LR estimate be presented. The choice of model determines the underlying probability calculation, and changes to it can result in non-negligible differences in the reported LR or corresponding verbal categorization presented to the trier-of-fact. In this paper, we study the impact of model differences on the LR and on the corresponding verbal expression computed using four variants of a continuous mixture interpretation method. The four models were tested five times each on 101, 1-, 2- and 3-person experimental samples with known contributors. For each sample, LRs were computed using the known contributor as the person of interest. In all four models, intra-model variability increased with an increase in the number of contributors and with a decrease in the contributor’s template mass. Inter-model variability in the associated verbal expression of the LR was observed in 32 of the 195 LRs used for comparison. Moreover, in 11 of these profiles there was a change from LR > 1 to LR < 1. These results indicate that modifications to existing continuous models do have the potential to significantly impact the final statistic, justifying the continuation of broad-based, large-scale, independent studies to quantify the limits of reliability and variability of existing forensically relevant systems. [ABSTRACT FROM AUTHOR]

Quantum information processing made a tremendous and remarkable impact on number of classical mechanic’s problems. The impact does not only stop at classical mechanics but also the cyber security paradigm. Quantum information and cryptography are two classes of quantum information processing which use the idea of qubits instead of bits as in classical information security. The idea of fast computations with multiple complexity level is becoming more realistic in the age of quantum information due to quantum parallelism where a single quantum computer does allow to compute hundreds of classical computers with less efforts and more accuracy. The evolution of quantum information processing replaces a number of classical mechanic’s aspects in computational and cyber security sciences. Our aim here is to introduce concepts of applied quantum dynamics in cryptography, which leads to an evolution of quantum cryptography. Quantum cryptography is one of the most astonishing solicitations of quantum information theory. To measure the quantum state of any system is not possible without disturbing that system. The facts of quantum mechanics on traditional cryptosystems lead to a new protocol and achieving maximum remarkable security for systems. The scope of this paper is to design an innovative encryption scheme for digital data based on quantum spinning and rotation operators. [ABSTRACT FROM AUTHOR]

In order to retrieve similar trademarks from large-scale trademark databases, combining the characteristics of trademark images, this paper presents a trademark image retrieval method based on regional and border feature fusion. Based on the target image extraction, the proposed approach describes the target region and border features. The region feature description is mainly based on the concept of partition block statistics. The region is divided into equal-area unit using concentric circles, and feature extraction is performed in each small block unit. For the border feature description, this study first detect corners, and then construct a Delaunay graph and extract features by combining the corner detected and the Delaunay triangulation reconstruction. In the search process, the method also incorporates information such as the trademark's color characteristics, trademark classification, and trademark keywords. The present study carried out image retrieval experiment on CE-SHAPE-1 database containing 1400 MPEG-7 core experimental shape, a classification trademark database containing 2000 images, and a national trademark database containing approximately 4.89 million images. The experimental results show that the proposed approach combines the advantages of region and border feature description, and can choose the best among various local optimizations, which makes the retrieval result more effective, more in line with human visual perception, and improves the retrieval accuracy. [ABSTRACT FROM AUTHOR]

It is usually assumed that each cooperator contributes equally to different public pools in spatial public goods game. However, it is more reasonable to invest differently according to individual investment preference. In this paper, an extended public goods game, in which cooperators contribute to the groups according to the investment preference, is developed. The investment preference of a cooperator is characterized by the fraction of the cooperator from his/her own memory about a group and the intensity of investment preference is represented by a tunable parameter α. The well-mixed population and the structured population are analyzed under this mechanism. It is shown that the investment preference can give rise to coordination. Moreover, the extensive numerical simulation results show that with the increasing of investment preference density or memory length, the proportion of cooperation can increase monotonously. This is because the investment preference could help cooperators resist the invasion from defectors. Compared with the basic version, the new mechanism is able to promote cooperation effectively. Our research may provide a valuable insight for further exploring the nature of cooperation in the real world. [ABSTRACT FROM AUTHOR]

This paper studies whether intentionality is more prevalent than fairness in social preferences. We do this by introducing a new three-player game in which the choices of neutral third-party arbiters are isolated from any monetary or strategic concerns. This allows us to study the normative preferences of subjects, and to compare the relative weight they give to intentions and inequality. The results show that arbiters are mainly concerned with inequality, while other’s (selfish) intentions seem to play a minor role in their preferences. This result is robust to a series of experimental designs, suggesting that the role of intentions in social preferences might be smaller than implied by the previous literature. [ABSTRACT FROM AUTHOR]

The process of inferring parameter values from experimental data can be a cumbersome task. In addition, the collection of experimental data can be time consuming and costly. This paper covers both these issues by addressing the following question: “Which experimental outputs should be measured to ensure that unique model parameters can be calculated?”. Stated formally, we examine the topic of minimal output sets that guarantee a model’s structural identifiability. To that end, we introduce an algorithm that guides a researcher as to which model outputs to measure. Our algorithm consists of an iterative structural identifiability analysis and can determine multiple minimal output sets of a model. This choice in different output sets offers researchers flexibility during experimental design. Our method can determine minimal output sets of large differential equation models within short computational times. [ABSTRACT FROM AUTHOR]

The clustering of time series has attracted growing research interest in recent years. The most popular clustering methods assume that the time series are only linearly dependent but this assumption usually fails in practice. To overcome this limitation, in this paper, we study clustering methods applicable to time series with a general and dependent structure. We propose a copula-based distance to measure dissimilarity among time series and consider an estimator for it, where the strong consistency of the estimator is guaranteed. Once the pairwise distance matrix for time series has been obtained, we apply a hierarchical clustering algorithm to cluster the time series and ensure its consistency. Numerical studies, including a large number of simulations and analysis of practical data, show that our method performs well. [ABSTRACT FROM AUTHOR]

Distribution centers (DCs) are an important part of the modern logistics system. The selection of a location for a DC is significant for saving costs and reducing externalities caused by distribution. In this paper, we propose a new hybrid method based on the analytic hierarchy process (AHP) and 2-tuple hybrid ordered weighted averaging (THOWA) to select the location of a DC in a megacity. First, we propose a new set of evaluation criteria integrating economic, political, social and ecological information based on the characteristics of Chinese megacities. Second, subjective criteria weights are calculated by AHP combining the evaluation of logistics experts. Third, experts from academia, enterprise and government assess the performance of alternatives. In addition, the overall evaluation values are aggregated by an improved THOWA operator to rank the alternatives. Finally, we conduct a sensitivity analysis to investigate the influence of criteria weights on the decision-making process. The proposed method is novel and addresses the uncertainty under limited quantitative information, which has the advantages of avoiding information loss and distortion problems in the integrating process and operating linguistic evaluation information effectively. The proposed method can be practically applied by municipal planning departments in deciding on the location of new DCs. A numerical application of the proposed method is provided. [ABSTRACT FROM AUTHOR]

Introduction: We describe a method for analyzing the within-household network dynamics of a disease transmission. We apply it to analyze the occurrences of endemic diarrheal disease in Cameroon, Central Africa based on observational, cross-sectional data available from household health surveys. Methods: To analyze the data, we apply formalism of the dynamic SID (susceptible-infected-diseased) process that describes the disease steady-state while adjusting for the household age-structure and environment contamination, such as water contamination. The SID transmission rates are estimated via MCMC method with the help of the so-called synthetic likelihood approach. Results: The SID model is fitted to a dataset on diarrhea occurrence from 63 households in Cameroon. We show that the model allows for quantification of the effects of drinking water contamination on both transmission and recovery rates for household diarrheal disease occurrence as well as for estimation of the rate of silent (unobserved) infections. Conclusions: The new estimation method appears capable of genuinely capturing the complex dynamics of disease transmission across various human, animal and environmental compartments at the household level. Our approach is quite general and can be used in other epidemiological settings where it is desirable to fit transmission rates using cross-sectional data. Software sharing: The R-scripts for carrying out the computational analysis described in the paper are available at . [ABSTRACT FROM AUTHOR]

Little is known about the interplay between affective and cognitive processes of decision making within the bounded rationality perspective, in particular for the debate on adaptive decision making and strategy selection. This gap in the knowledge is particularly important as affect and deliberation may direct preferences in opposite directions. How do decision makers solve such dissonance? In this paper, we address this question by exploring the use of integral affect as a choice heuristic in comparison with and in conjunction to “take the best,” and weighted addition of attributes (WADD). We operationalize theories of reliance on affect in choice through a "Take the emotionally best" algorithm. Its predictive power is experimentally tested against other models, including mixed-sequential cognitive/affective procedures. We find that individual decisions are better predicted by a sequential combination of "Take the emotionally best" and "Take the best" with a slight dominance of the former. Conditions of cognitive/affective ambivalence, low discrimination ability and high complexity provide the cognitive architecture where such blended choice strategies predict decisions more precisely. This implies that reliance on integral affect may precede the use of cognitive cues following an ecological rationality perspective rather than supporting a kind of competition between affect and cognition as implied in current literature. [ABSTRACT FROM AUTHOR]

Archaeologists often need to date and group artifact types to discern typologies, chronologies, and classifications. For over a century, statisticians have been using classification and clustering techniques to infer patterns in data that can be defined by algorithms. In the case of archaeology, linear regression algorithms are often used to chronologically date features and sites, and pattern recognition is used to develop typologies and classifications. However, archaeological data is often expensive to collect, and analyses are often limited by poor sample sizes and datasets. Here we show that recent advances in computation allow archaeologists to use machine learning based on much of the same statistical theory to address more complex problems using increased computing power and larger and incomplete datasets. This paper approaches the problem of predicting the chronology of archaeological sites through a case study of medieval temples in Angkor, Cambodia. For this study, we have a large dataset of temples with known architectural elements and artifacts; however, less than ten percent of the sample of temples have known dates, and much of the attribute data is incomplete. Our results suggest that the algorithms can predict dates for temples from 821–1150 CE with a 49-66-year average absolute error. We find that this method surpasses traditional supervised and unsupervised statistical approaches for under-specified portions of the dataset and is a promising new method for anthropological inquiry. [ABSTRACT FROM AUTHOR]

This paper examines possible causes of additional spudcan settlement after preloading using both centrifuge model tests and small strain finite element analysis, in which spudcan settlement due to cavity collapse, consolidation settlement and settlement due to cyclic loading are incorporated. Back-analyses of seven jack-up rigs in the Gulf of Mexico show that even complete cavity collapse could only explain part of the measured additional settlements in the majority of the cases. Small strain finite element analyses also show that spudcan consolidation settlement is likely to account for even less of the additional settlement than cavity collapse in the sites considered. On the other hand, centrifuge model tests show that large amplitude cyclic rocking has a very significant effect on spudcan settlement, even if half of the preload has been removed. However, this effect cannot be explained by the exceedance of the yield envelope since the loading combination had not exceeded the yield envelope. One possible explanation is the stiffness and strength degradation of the soil under cyclic loading. In view of this, a conservative approach is recommended in instances where large amplitude cyclic rocking, such as that arising from storm loading, is expected shortly after preloading. The presence of lattice legs is found to reduce the spudcan settlement during large amplitude cyclic rocking. [ABSTRACT FROM AUTHOR]

Influence maximization has attracted a lot of attention due to its numerous applications, including diffusion of social movements, the spread of news, viral marketing and outbreak of diseases. The objective is to discover a group of users that are able to maximize the spread of influence across a network. The greedy algorithm gives a solution to the Influence Maximization problem while having a good approximation ratio. Nevertheless it does not scale well for large scale datasets. In this paper, we propose Matrix Influence, MATI, an efficient algorithm that can be used under both the Linear Threshold and Independent Cascade diffusion models. MATI is based on the precalculation of the influence by taking advantage of the simple paths in the node’s neighborhood. An extensive empirical analysis has been performed on multiple real-world datasets showing that MATI has competitive performance when compared to other well-known algorithms with regards to running time and expected influence spread. [ABSTRACT FROM AUTHOR]

The accuracy and diversity of recommendation algorithms have always been the research hotspot of recommender systems. A good recommender system should not only have high accuracy and diversity, but also have adequate robustness against spammer attacks. However, the issue of recommendation robustness has received relatively little attention in the literature. In this paper, we systematically study the influences of different spammer behaviors on the recommendation results in various recommendation algorithms. We further propose an improved algorithm by incorporating the inner-similarity of user’s purchased items in the classic KNN approach. The new algorithm effectively enhances the robustness against spammer attacks and thus outperforms traditional algorithms in recommendation accuracy and diversity when spammers exist in the online commercial systems. [ABSTRACT FROM AUTHOR]

This paper presents a discretization methodology applied to the NBV (Next Best View) problem, which consists of determining the heuristical best position of the next scan. This new methodology is a hybrid process between a homogenous voxelization and an octree structure that preserves the advantages of both methods. An octree structure is not directly applicable to the NBV problem: as the point cloud grows with every successive scanning, the limits and position of the discretization, octree structure must coincide, in order to transfer the information from one scan to the next. This problem is solved by applying a first coarse voxelization, followed by the division of each voxel in an octree structure. In addition, a previous methodology for solving the NBV problem has been adapted to make use of this novel approach. Results show that the new method is three times faster than the homogenous voxelization for a maximum resolution of 0.2m. For this target resolution of 0.2m, the number of voxels/octants in the discretization is reduced approximately by a 400%, from 35.360 to 8.937 for the study case presented. [ABSTRACT FROM AUTHOR]

In this paper we describe how to efficiently record the entire genetic history of a population in forwards-time, individual-based population genetics simulations with arbitrary breeding models, population structure and demography. This approach dramatically reduces the computational burden of tracking individual genomes by allowing us to simulate only those loci that may affect reproduction (those having non-neutral variants). The genetic history of the population is recorded as a succinct tree sequence as introduced in the software package msprime, on which neutral mutations can be quickly placed afterwards. Recording the results of each breeding event requires storage that grows linearly with time, but there is a great deal of redundancy in this information. We solve this storage problem by providing an algorithm to quickly ‘simplify’ a tree sequence by removing this irrelevant history for a given set of genomes. By periodically simplifying the history with respect to the extant population, we show that the total storage space required is modest and overall large efficiency gains can be made over classical forward-time simulations. We implement a general-purpose framework for recording and simplifying genealogical data, which can be used to make simulations of any population model more efficient. We modify two popular forwards-time simulation frameworks to use this new approach and observe efficiency gains in large, whole-genome simulations of one to two orders of magnitude. In addition to speed, our method for recording pedigrees has several advantages: (1) All marginal genealogies of the simulated individuals are recorded, rather than just genotypes. (2) A population of N individuals with M polymorphic sites can be stored in O(N log N + M) space, making it feasible to store a simulation’s entire final generation as well as its history. (3) A simulation can easily be initialized with a more efficient coalescent simulation of deep history. The software for recording and processing tree sequences is named tskit. [ABSTRACT FROM AUTHOR]

Due to recent advances in genetic manipulation, transgenic mosquitoes may be a viable alternative to reduce some diseases. Feasibility conditions are obtained by simulating and analyzing mathematical models that describe the behavior of wild and transgenic populations living in the same geographic area. In this paper, we present a reaction–diffusion model in which the reaction term is a nonlinear function that describes the interaction between wild and transgenic mosquitoes, considering the zygosity, and the diffusive term that represents a nonuniform spatial spreading characterized by a random diffusion parameter. The resulting nonlinear system of partial differential equations is numerically solved using the sequential operator splitting technique, combining the finite element method and Runge-Kutta method. This scheme is numerically implemented considering uncertainty in the diffusion parameters of the model. Several scenarios simulating spatial release strategies of transgenic mosquitoes are analyzed, demonstrating an intrinsic association between the transgene frequency in the total population and the strategy adopted. [ABSTRACT FROM AUTHOR]

Research: The body composition model is closely related to the physiological characteristics of the human body. At the same time there can be a large number of physiological characteristics, many of which may be redundant or irrelevant. In existing human physiological feature selection algorithms, it is difficult to overcome the impact that redundancy and irrelevancy may have on human body composition modeling. This suggests a role for selection algorithms, where human physiological characteristics are identified using a combination of filtering and improved clustering. To do this, a feature filtering method based on Hilbert-Schmidt dependency criteria is first of all used to eliminate irrelevant features. After this, it is possible to use improved Chameleon clustering to increase the combination of sub-clusters amongst the characteristics, thereby removing any redundant features to obtain a candidate feature set for human body composition modeling. Method We report here on the use of an algorithm to filter the characteristic parameters in INBODY770 (this paper used INBODY 770 as body composition analyzer.) measurement data, which has three commonly-used impedance bands (1 kHZ, 250 kHZ, 500 kHZ). This algorithm is able to filter out parameters that have a low correlation with body composition BFM. The algorithm is also able to draw upon improved clustering techniques to reduce the initial feature set from 29 parameters to 10 parameters for any parameters of the 250 kHZ band that remain after filtering. In addition, we also examined the impact of different sample sizes on feature selection. Result: The proposed algorithm is able to remove irrelevant and redundant features and the resulting correlation between the model and the body composition (BFM which is a whole body fat evaluation can better assess the body's overall fat and muscle composition.) is 0.978, thereby providing an improved model for prediction with a relative error of less than 0.12. [ABSTRACT FROM AUTHOR]

In this paper, a new method is proposed for prediction of ship roll motion based on extreme learning machine (ELM). To improve the prediction accuracy and avoid over or under fitting, two techniques are adopted to select the appropriate structure of ELM. First, the inputs of the ELM are selected from the roll motion time series using Lipschitz quotient method. Second, the number of hidden layer nodes is determined via ℓ1 regularized technique. Finally, the ℓ1 regularized ELM is solved by least angle regression (LAR) algorithm. The effectiveness of the proposed method is demonstrated by ship roll motion prediction experiments based on the real measured ship roll motion time series. [ABSTRACT FROM AUTHOR]

The integration of ubiquitous technologies in the field of education has considerably enhanced our way of learning. Such technologies enable students to get a gradual feedback about their performance and to provide adapted learning materials. It is particularly important in the domain of foreign language learning which requires intense daily practice. One of the main inputs of adaptive learning systems is the user’s understanding of a reading material. The reader’s understanding can be divided into two parts: the objective understanding and the subjective understanding. The objective understanding can be measured by comprehension questions about the content of the text. The subjective understanding is the reader’s perception of his own understanding. The subjective understanding plays an important role in the reader’s motivation, self-esteem and confidence. However, its automatic estimation remains a challenging task. This paper is one of the first to propose a method to estimate the subjective understanding. We show that using the eye gaze to predict the subjective understanding improves the estimation by 13% as compared to using comprehension questions. [ABSTRACT FROM AUTHOR]

Background: Regular expression matching (REM) is widely employed as the major tool for deep packet inspection (DPI) applications. For automatic processing, the regular expression patterns need to be converted to a deterministic finite automata (DFA). However, with the ever-increasing scale and complexity of pattern sets, state explosion problem has brought a great challenge to the DFA based regular expression matching. Rule grouping is a direct method to solve the state explosion problem. The original rule set is divided into multiple disjoint groups, and each group is compiled to a separate DFA, thus to significantly restrain the severe state explosion problem when compiling all the rules to a single DFA. Objective: For practical implementation, the total number of DFA states should be as few as possible, thus the data structures of these DFAs can be deployed on fast on-chip memories for rapid access. In addition, to support fast pattern update in some applications, the time cost for grouping should be as small as possible. In this study, we aimed to propose an efficient grouping method, which generates as few states as possible with as little time overhead as possible. Methods: When compiling multiple patterns into a single DFA, the number of DFA states is usually greater than the total number of states when compiling each pattern to a separate DFA. This is mainly caused by the semantic overlaps among different rules. By quantifying the interaction values for each pair of rules, the rule grouping problem can be reduced to the maximum k-cut graph partitioning problem. Then, we propose a heuristic algorithm called the one-step greedy (OSG) algorithm to solve this NP-hard problem. What’s more, a subroutine named the heuristic initialization (HI) algorithm is devised to further optimize the grouping algorithms. Results: We employed three practical rule sets for the experimental evaluation. Results show that the OSG algorithm outperforms the state-of-the-art grouping solutions regarding both the total number of DFA states and time cost for grouping. The HI subroutine also demonstrates its significant optimization effect on the grouping algorithms. Conclusions: The DFA state explosion problem has became the most challenging issue in the regular expression matching applications. Rule grouping is a practical direction by dividing the original rule sets into multiple disjoint groups. In this paper, we investigate the current grouping solutions, and propose a compact and efficient grouping algorithm. Experiments conducted on practical rule sets demonstrate the superiority of our proposal. [ABSTRACT FROM AUTHOR]

This paper presents a lightweight synthesis algorithm, named adaptive region segmentation based piecewise linear (ARSPL) algorithm, for reconstructing standard 12-lead electrocardiogram (ECG) signals from a 3-lead subset (I, II and V2). Such a lightweight algorithm is particularly suitable for healthcare mobile devices with limited resources for computing, communication and data storage. After detection of R-peaks, the ECGs are segmented by cardiac cycles. Each cycle is further divided into four regions according to different cardiac electrical activity stages. A personalized linear regression algorithm is then applied to these regions respectively for improved ECG synthesis. The proposed ARSPL method has been tested on 39 subjects randomly selected from the PTB diagnostic ECG database and achieved accurate synthesis of remaining leads with an average correlation coefficient of 0.947, an average root-mean-square error of 55.4μV, and an average runtime performance of 114ms. Overall, these results are significantly better than those of the common linear regression method, the back propagation (BP) neural network and the BP optimized using the genetic algorithm. We have also used the reconstructed ECG signals to evaluate the denivelation of ST segment, which is a potential symptom of intrinsic myocardial disease. After ARSPL, only 10.71% of the synthesized ECG cycles are with a ST-level synthesis error larger than 0.1mV, which is also better than those of the three above-mentioned methods. [ABSTRACT FROM AUTHOR]

Predicting the population-level effects of an infectious disease intervention that incorporate multiple modes of intervention is complicated by the joint non-linear dynamics of both infection transmission and the intervention itself. In this paper, we consider the sensitivity of Dynamic Optimal Control Profiles (DOCPs) for the optimal joint investment in both a contagiousness and susceptibility-based control of HIV to bio-behavioral, economic, and programmatic assumptions. The DOCP is calculated using recently developed numerical algorithms that allow controls to be represented by a set of piecewise constant functions that maintain a constant yearly budget. Our transmission model assumes multiple stages of HIV infection corresponding to acute and chronic infection and both within- and between-individual behavioral heterogeneity. We parameterize a baseline scenario from a longitudinal study of sexual behavior in MSM and consider sensitivity of the DOCPs to deviations from that baseline scenario. In the baseline scenario, the primary determinant of the dominant control were programmatic factors, regardless of budget. In sensitivity analyses, the qualitative aspects of the optimal control policy were often robust to significant deviation in assumptions regarding transmission dynamics. In addition, we found several conditions in which long-term joint investment in both interventions was optimal. Our results suggest that modeling in the service of decision support for intervention design can improve population-level effects of a limited set of economic resources. We found that economic and programmatic factors were as important as the inherent transmission dynamics in determining population-level intervention effects. Given our finding that the DOCPs were robust to alternative biological and behavioral assumptions it may be possible to identify DOCPs even when the data are not sufficient to identify a transmission model. [ABSTRACT FROM AUTHOR]

Wireless Mesh Networks (WMNs) integrate the advantages of WLANs and mobile Ad Hoc networks, which have become the key techniques of next-generation wireless networks in the context of emergency recovery. Wireless Mesh Networks (WMNs) are multi-hop wireless networks with instant deployment, self-healing, self-organization and self-configuration features. These capabilities make WMNs a promising technology for incident and emergency communication. An incident area network (IAN) needs a reliable and lively routing path during disaster recovery and emergency response operations when infrastructure-based communications and power resources have been destroyed and no routes are available. Power aware routing plays a significant role in WMNs, in order to provide continuous efficient emergency services. The existing power aware routing algorithms used in wireless networks cannot fully fit the characteristics of WMNs, to be used for emergency recovery. This paper proposes a power aware routing algorithm (PARA) for WMNs, which selects optimal paths to send packets, mainly based on the power level of next node along the path. This algorithm was implemented and tested in a proven simulator. The analytic results show that the proposed power node-type aware routing algorithm metric can clearly improve the network performance by reducing the network overheads and maintaining a high delivery ratio with low latency. [ABSTRACT FROM AUTHOR]

Natural disasters like hurricanes, floods or earthquakes can damage power grid devices and create cascading blackouts and islands. The nature of failure propagation and extent of damage, among other factors, is dependent on the structural features of the grid, that are distinct from that of random networks. This paper analyzes the structural vulnerability of real power grids to impending disasters and presents intuitive graphical metrics to quantify the extent of topological damage. We develop two improved graph eigen-value based bounds on the grid vulnerability. Further we study adversarial attacks aimed at weakening the grid’s structural robustness and present three combinatorial algorithms to determine the optimal topological attack. Simulations on power grid networks and comparison with existing work show the improvements of the proposed measures and attack schemes. [ABSTRACT FROM AUTHOR]

People are motivated to hold favorable attitudes about the systems on which they depend, so they justify (i.e., rationalize, defend and bolster) forms of social and economic inequality, even if the inequality is disadvantageous to them. This paper examines how this system-justifying motivation is reflected in behaviors involving interpersonal trust. In a series of three experiments using the trust game I manipulate income inequality by providing participants with higher (advantaged position) or lower (disadvantaged position) initial endowments and measure their trust toward individuals on the same or on different positions. Results show that higher income individuals trust other higher income individuals more than lower income individuals (ingroup favoritism), while lower income individuals trust higher income individuals more than lower income individuals (outgroup favoritism). It is also shown that the strength of these biases is dependent on the level of endorsement of system justifying ideology and the legitimacy of the system. More trust toward those in advantaged positions within a social system, expressed both by equally advantaged as well as by disadvantaged others, not only secures the advantaged in their positions but also reinforces the underlying inequality. [ABSTRACT FROM AUTHOR]

To predict what products customers will buy in next transaction is an important task. Existing work in next-basket prediction can be summarized into two paradigms. One is the item-centric paradigm, where sequential patterns are mined from customers’ transactional data and leveraged for prediction. However, these approaches usually suffer from the data sparseness problem. The other is the user-centric paradigm, where collaborative filtering techniques have been applied on customers’ historical data. However, these methods ignore the sequential behaviors of customers which is often crucial for next-basket prediction. In this paper, we introduce a hybrid method, namely the Co-Factorization model over Sequential and Historical purchase data (CFSH for short) for next-basket recommendation. Compared with existing methods, our approach conveys the following merits: 1) By mining global sequential patterns, we can avoid the sparseness problem in traditional item-centric methods; 2) By factorizing product-product and customer-product matrices simultaneously, we can fully exploit both sequential and historical behaviors to learn customer and product representations better; 3) By using a hybrid recommendation method, we can achieve better performance in next-basket prediction. Experimental results on three real-world purchase datasets demonstrated the effectiveness of our approach as compared with the state-of-the-art methods. [ABSTRACT FROM AUTHOR]

A freight train service network generally involves two categories of trains: unscheduled trains, whose operating frequencies fluctuate with the freight demand, and scheduled trains, which are operated based on regular timetables similar to passenger trains. The timetables for scheduled trains are released to the public once determined, and they are not influenced by the freight demand. Typically, the total capacity of scheduled trains can satisfy the predicted average demand of express cargos. However, in practice, the demand always changes. Therefore, a method to assign the shipments to scheduled and unscheduled train services has become an important issue faced in railway transportation. This paper focuses on the coordinated optimization of rail express cargo assignment in a hybrid train services network. On the premise of fully utilizing the capacity of scheduled train services, we propose a car-to-train assignment model to reasonably assign rail express cargos to scheduled and unscheduled trains. The objective aims to maximize the profit of transporting the rail express cargos. The constraints include the capacity restriction on the service arcs, flow balance constraints, transportation due date constraints and logical relationship constraints among the decision variables. Furthermore, we discuss a linearization technique to convert the nonlinear transportation due date constraint into a linear constraint, making it possible to solve by a standard optimization solver. Finally, an illustrative case study based on the Beijing-Guangzhou Railway Line is carried out to demonstrate the effectiveness and efficiency of the proposed solution approach. [ABSTRACT FROM AUTHOR]

This paper describes an approach for improving the accuracy of memory-based collaborative filtering, based on the technique for order of preference by similarity to ideal solution (TOPSIS) method. Recommender systems are used to filter the huge amount of data available online based on user-defined preferences. Collaborative filtering (CF) is a commonly used recommendation approach that generates recommendations based on correlations among user preferences. Although several enhancements have increased the accuracy of memory-based CF through the development of improved similarity measures for finding successful neighbors, there has been less investigation into prediction score methods, in which rating/preference scores are assigned to items that have not yet been selected by a user. A TOPSIS solution for evaluating multiple alternatives based on more than one criterion is proposed as an alternative to prediction score methods for evaluating and ranking items based on the results from similar users. The recommendation accuracy of the proposed TOPSIS technique is evaluated by applying it to various common CF baseline methods, which are then used to analyze the MovieLens 100K and 1M benchmark datasets. The results show that CF based on the TOPSIS method is more accurate than baseline CF methods across a number of common evaluation metrics. [ABSTRACT FROM AUTHOR]

Frequently, port scans are early indicators of more serious attacks. Unfortunately, the detection of slow port scans in company networks is challenging due to the massive amount of network data. This paper proposes an innovative approach for preprocessing flow-based data which is specifically tailored to the detection of slow port scans. The preprocessing chain generates new objects based on flow-based data aggregated over time windows while taking domain knowledge as well as additional knowledge about the network structure into account. The computed objects are used as input for the further analysis. Based on these objects, we propose two different approaches for detection of slow port scans. One approach is unsupervised and uses sequential hypothesis testing whereas the other approach is supervised and uses classification algorithms. We compare both approaches with existing port scan detection algorithms on the flow-based CIDDS-001 data set. Experiments indicate that the proposed approaches achieve better detection rates and exhibit less false alarms than similar algorithms. [ABSTRACT FROM AUTHOR]

New rapid diagnostic tests (RDTs) for screening human African trypanosomiasis (HAT) have been introduced as alternatives to the card agglutination test for trypanosomiasis (CATT). One brand of RDT, the SD BIOLINE HAT RDT has been shown to have lower specificity but higher sensitivity than CATT, so to make a rational choice between screening strategies, a cost-effectiveness analysis is a key element. In this paper we estimate the relative cost-effectiveness of CATT and the RDT when implemented in the Democratic Republic of the Congo (DRC). Data on the epidemiological parameters and costs were collected as part of a larger study. These data were used to model three different diagnostic algorithms in mobile teams and fixed health facilities, and the relative cost-effectiveness was measured as the average cost per case diagnosed. In both fixed facilities and mobile teams, screening of participants using the SD BIOLINE HAT RDT followed by parasitological confirmation had a lower cost-effectiveness ratio than in algorithms using CATT. Algorithms using the RDT were cheaper by 112.54 (33.2%) and 88.54 (32.92%) US dollars per case diagnosed in mobile teams and fixed health facilities respectively, when compared with algorithms using CATT. Sensitivity analysis demonstrated that these conclusions were robust to a number of assumptions, and that the results can be scaled to smaller or larger facilities, and a range of prevalences. The RDT was the most cost-effective screening test in all realistic scenarios and detected more cases than CATT. Thus, on this basis, the SD BIOLINE HAT RDT could be considered as the most cost-effective option for use in routine screening for HAT in the DRC. [ABSTRACT FROM AUTHOR]

Minimization functionals related to Euler’s elastica energy has a broad range of applications in computer vision and image processing. This paper proposes a novel Euler’s elastica and curvature-based variational model for image restoration corrupted with multiplicative noise. It combines Euler’s elastica curvature with a Weberized total variation (TV) regularization and gets a novel Euler’s elastica energy and TV-based minimization functional. The combined approach in this variational model can preserve edges while reducing the blocky effect in smooth regions. The implicit gradient descent scheme is applied to efficiently finding the minimizer of the proposed functional. Experimental results demonstrate the effectiveness of the proposed model in visual improvement, as well as an increase in the peak signal-to-noise ratio, compared to the PDE-based methods. [ABSTRACT FROM AUTHOR]

In palynology, the visual classification of pollen grains from different species is a hard task which is usually tackled by human operators using microscopes. Its complete automatization would save a high quantity of resources and provide valuable improvements especially for allergy-related information systems, but also for other application fields as paleoclimate reconstruction, quality control of honey based products, collection of evidences in criminal investigations or fabric dating and tracking. This paper presents three state-of-the-art deep learning classification methods applied to the recently published POLEN23E image dataset. The three methods make use of convolutional neural networks: the first one is strictly based on the idea of transfer learning, the second one is based on feature extraction and the third one represents a hybrid approach, combining transfer learning and feature extraction. The results from the three methods are indeed very good, reaching over 97% correct classification rates in images not previously seen by the models, where other authors reported around 70. [ABSTRACT FROM AUTHOR]

Several modern genomic technologies, such as DNA-Methylation arrays, measure spatially registered probes that number in the hundreds of thousands across multiple chromosomes. The measured probes are by themselves less interesting scientifically; instead scientists seek to discover biologically interpretable genomic regions comprised of contiguous groups of probes which may act as biomarkers of disease or serve as a dimension-reducing pre-processing step for downstream analyses. In this paper, we introduce an unsupervised feature learning technique which maps technological units (probes) to biological units (genomic regions) that are common across all subjects. We use ideas from fusion penalties and convex clustering to introduce a method for Spatial Convex Clustering, or SpaCC. Our method is specifically tailored to detecting multi-subject regions of methylation, but we also test our approach on the well-studied problem of detecting segments of copy number variation. We formulate our method as a convex optimization problem, develop a massively parallelizable algorithm to find its solution, and introduce automated approaches for handling missing values and determining tuning parameters. Through simulation studies based on real methylation and copy number variation data, we show that SpaCC exhibits significant performance gains relative to existing methods. Finally, we illustrate SpaCC’s advantages as a pre-processing technique that reduces large-scale genomics data into a smaller number of genomic regions through several cancer epigenetics case studies on subtype discovery, network estimation, and epigenetic-wide association. [ABSTRACT FROM AUTHOR]

This paper proposes a global approach for the multi-view registration of unordered range scans. Our method starts with the pair-wise registration, where multi-scale descriptor is selected for feature point and the propagation of feature correspondence is accordingly accelerated. Subsequently, we design an effective rule to judge the reliability of these pair-wise registration results. According to the judgment of reliability, we propose a model fusion method, which can utilize reliable results of pair-wise registration to augment the model shape. Finally, multi-view registration can be achieved by operating the pair-wise registration, reliability judgment, and model fusion alternately. The proposed approach can be applied to scene reconstruction and robot mapping. Experimental results conducted on public datasets show that the proposed approach can automatically achieve multi-view registration of unordered range scans. Compared with other related approaches, the proposed approach has superior performances in accuracy and effectiveness. [ABSTRACT FROM AUTHOR]

The vehicular ad hoc network (VANET) has been identified as one of the most promising technologies for managing future intelligent transportation systems. This paper proposes a distributed transmission power adjustment algorithm for communication congestion control and awareness enhancement to address communication congestion problems that can arise in VANETs. The objective of the proposed algorithm is to provide maximum awareness of surrounding vehicles’ status while maintaining a communications channel load below the allowed threshold. The proposed algorithm accomplishes this by adjusting the transmission range of each vehicle in the network progressively and gradually, while monitoring the communications channel load of each vehicle. By changing the transmission range of a vehicle little by little according to the communications channel load of its neighboring vehicles, the algorithm finds the optimal transmission range that provides maximum awareness without resulting in communications congestion. In addition, the proposed algorithm appropriately controls the channel load in a fair manner without sacrificing awareness of specific vehicles in the congested situation. This allows nearby vehicles to obtain more peripheral information to help them stay away from potential hazards and maintain safety. The proposed algorithm was implemented in a simulation environment, and its performance was validated in various traffic scenarios. The simulation results show that the proposed algorithm can deal with communication congestion by controlling the transmission power fairly to a target threshold in various traffic situations. [ABSTRACT FROM AUTHOR]

In this paper we propose a criterion to balance the processing time and the solution quality of k-means cluster algorithms when applied to instances where the number n of objects is big. The majority of the known strategies aimed to improve the performance of k-means algorithms are related to the initialization or classification steps. In contrast, our criterion applies in the convergence step, namely, the process stops whenever the number of objects that change their assigned cluster at any iteration is lower than a given threshold. Through computer experimentation with synthetic and real instances, we found that a threshold close to 0.03n involves a decrease in computing time of about a factor 4/100, yielding solutions whose quality reduces by less than two percent. These findings naturally suggest the usefulness of our criterion in Big Data realms. [ABSTRACT FROM AUTHOR]

Background: The impact of cutaneous leishmaniasis (CL) on the quality of life of patients has been neglected in research studies worldwide. The few reported studies have used non-specific questionnaires for the disease, which represents a limitation since generic instruments may not address specific aspects of the disease, compromising the evaluation of its real impact. The aim of this paper is to describe the development and the initial validation of an instrument for evaluating the impact of CL, named the Cutaneous Leishmaniasis Impact Questionnaire. Methodology: The formulation and validation of the instrument consisted of the following steps: (1) literature review; (2) conceptual framework construction and initial item generation; (3) tool analysis by health professionals (experts); (4) tool evaluation performed by the patients; and (5) a pilot study with 100 patients with localized CL, evaluated at a reference ambulatory facility in Belo Horizonte, in the state of Minas Gerais, Brazil. The structure of the proposed instrument was analyzed using hierarchical cluster analysis (ICLUST). Results: Twenty-seven items were initially proposed by the researchers to compose the questionnaire. Content validity (evaluates if the instrument fully assesses the construct of interest) was evaluated by the panel of experts, while face validity (evaluates how potential participants interpret the items) was evaluated by the target population. In this step, some items were excluded, reformulated and/or included. After evaluating a factorial structure of the items in accordance with the cluster analysis, we assembled a questionnaire with 25 items (alpha = 0.86), with high reliability and homogeneity, which address the following: 1) the general impact of the disease (alpha = 0.91, beta = 0.67) and 2) the evaluation of the perception about the treatment and health services (alpha = 0.72, beta = 0.51). Conclusions: The Cutaneous Leishmaniasis Impact Questionnaire, developed with contributions from patients and experts, was confirmed, in this first validation, as a useful and reliable instrument. [ABSTRACT FROM AUTHOR]

The problem that passengers are hard to take taxis while empty driving rate is high widely exists under the traditional taxi operation mode. The implementation of taxi carpooling mode can alleviate the problem in a certain extent. The objective of this study is to optimize the taxi carpooling path. Firstly, the taxi carpooling path optimization model with single objective and its extended model with multiple objectives are built respectively. Then, the single objective path optimization model of taxi carpooling is solved based on the improved single objective genetic algorithm, and the multiple-objective path optimization model of taxi carpooling is solved based on the improved multiple-objective genetic algorithm. Finally, a case study is carried out based on a road network with 24 nodes. The case study results show the path optimization models and algorithms of taxi carpooling proposed in the paper can quickly get the taxi carpooling path, and can increase the income of taxi driver while reduce the cost for passengers. [ABSTRACT FROM AUTHOR]

PubMed is a free search engine for biomedical literature accessed by millions of users from around the world each day. With the rapid growth of biomedical literature—about two articles are added every minute on average—finding and retrieving the most relevant papers for a given query is increasingly challenging. We present Best Match, a new relevance search algorithm for PubMed that leverages the intelligence of our users and cutting-edge machine-learning technology as an alternative to the traditional date sort order. The Best Match algorithm is trained with past user searches with dozens of relevance-ranking signals (factors), the most important being the past usage of an article, publication date, relevance score, and type of article. This new algorithm demonstrates state-of-the-art retrieval performance in benchmarking experiments as well as an improved user experience in real-world testing (over 20% increase in user click-through rate). Since its deployment in June 2017, we have observed a significant increase (60%) in PubMed searches with relevance sort order: it now assists millions of PubMed searches each week. In this work, we hope to increase the awareness and transparency of this new relevance sort option for PubMed users, enabling them to retrieve information more effectively. [ABSTRACT FROM AUTHOR]

In this paper, an image-based waste collection scheduling involving a node with three waste bins is considered. First, the system locates the three bins and determines the waste level of each bin using four Laws Masks and a set of Support Vector Machine (SVM) classifiers. Next, a Hidden Markov Model (HMM) is used to decide on the number of days remaining before waste is collected from the node. This decision is based on the HMM’s previous state and current observations. The HMM waste collection scheduling seeks to maximize the number of days between collection visits while preventing waste contamination due to late collection. The proposed system was trained using 100 training images and then tested on 100 test images. Each test image contains three bins that might be shifted, rotated, occluded or toppled over. The upright bins could be empty, partially full or full of garbage of various shapes and sizes. The method achieves bin detection, waste level classification and collection day scheduling rates of 100%, 99.8% and 100% respectively. [ABSTRACT FROM AUTHOR]

Sentiment analysis is widely studied to extract opinions from user generated content (UGC), and various methods have been proposed in recent literature. However, these methods are likely to introduce sentiment bias, and the classification results tend to be positive or negative, especially for the lexicon-based sentiment classification methods. The existence of sentiment bias leads to poor performance of sentiment analysis. To deal with this problem, we propose a novel sentiment bias processing strategy which can be applied to the lexicon-based sentiment analysis method. Weight and threshold parameters learned from a small training set are introduced into the lexicon-based sentiment scoring formula, and then the formula is used to classify the reviews. In this paper, a completed sentiment classification framework is proposed. SentiWordNet (SWN) is used as the experimental sentiment lexicon, and review data of four products collected from Amazon are used as the experimental datasets. Experimental results show that the bias processing strategy reduces polarity bias rate (PBR) and improves performance of the lexicon-based sentiment analysis method. [ABSTRACT FROM AUTHOR]

The research about unmanned aerial vehicle (UAV) swarm has developed rapidly in recent years, especially the UAV swarm with sensors which is becoming common means of achieving situational awareness. Due to inadequate researches of the UAV swarm with complex control structure currently, we propose a patrolling task planning algorithm for the UAV swarm with double-layer centralized control structure under the uncertain and dynamic environment. The main objective of the UAV swarm is to collect environment information as much as possible. To summarized, the primary contributions of this paper are as follows. We first define the patrolling problem. After that, the patrolling problem is modeled as the Partially Observable Markov Decision Process (POMDP) problem. Building upon this, we put forward a myopic and scalable online task planning algorithm. The algorithm contains online heuristic function, sequential allocation method, and the mechanism of bottom-up information flow and top-down command flow, reducing the computation complexity effectively. Moreover, as the number of control layers increases, this algorithm guarantees the performance without increasing the computation complexity for the swarm leader. Finally, we empirically evaluate our algorithm in the specific scenarios. [ABSTRACT FROM AUTHOR]

Interactions between countries originate from diverse aspects such as geographic proximity, trade, socio-cultural habits, language, religions, etc. Geopolitics studies the influence of a country’s geographic space on its political power and its relationships with other countries. This work reveals the potential of Wikipedia mining for geopolitical study. Actually, Wikipedia offers solid knowledge and strong correlations among countries by linking web pages together for different types of information (e.g. economical, historical, political, and many others). The major finding of this paper is to show that meaningful results on the influence of country ties can be extracted from the hyperlinked structure of Wikipedia. We leverage a novel stochastic matrix representation of Markov chains of complex directed networks called the reduced Google matrix theory. For a selected small size set of nodes, the reduced Google matrix concentrates direct and indirect links of the million-node sized Wikipedia network into a small Perron-Frobenius matrix keeping the PageRank probabilities of the global Wikipedia network. We perform a novel sensitivity analysis that leverages this reduced Google matrix to characterize the influence of relationships between countries from the global network. We apply this analysis to two chosen sets of countries (i.e. the set of 27 European Union countries and a set of 40 top worldwide countries). We show that with our sensitivity analysis we can exhibit easily very meaningful information on geopolitics from five different Wikipedia editions (English, Arabic, Russian, French and German). [ABSTRACT FROM AUTHOR]

In this paper we present a computer aided detection (CAD) system for automated measurement of the fetal head circumference (HC) in 2D ultrasound images for all trimesters of the pregnancy. The HC can be used to estimate the gestational age and monitor growth of the fetus. Automated HC assessment could be valuable in developing countries, where there is a severe shortage of trained sonographers. The CAD system consists of two steps: First, Haar-like features were computed from the ultrasound images to train a random forest classifier to locate the fetal skull. Secondly, the HC was extracted using Hough transform, dynamic programming and an ellipse fit. The CAD system was trained on 999 images and validated on an independent test set of 335 images from all trimesters. The test set was manually annotated by an experienced sonographer and a medical researcher. The reference gestational age (GA) was estimated using the crown-rump length measurement (CRL). The mean difference between the reference GA and the GA estimated by the experienced sonographer was 0.8 ± 2.6, −0.0 ± 4.6 and 1.9 ± 11.0 days for the first, second and third trimester, respectively. The mean difference between the reference GA and the GA estimated by the medical researcher was 1.6 ± 2.7, 2.0 ± 4.8 and 3.9 ± 13.7 days. The mean difference between the reference GA and the GA estimated by the CAD system was 0.6 ± 4.3, 0.4 ± 4.7 and 2.5 ± 12.4 days. The results show that the CAD system performs comparable to an experienced sonographer. The presented system shows similar or superior results compared to systems published in literature. This is the first automated system for HC assessment evaluated on a large test set which contained data of all trimesters of the pregnancy. [ABSTRACT FROM AUTHOR]

In this paper, we propose a novel object tracking algorithm by using high-dimensional particle filter and combined features. Firstly, the refined two-dimensional principal component analysis and the tendency are combined to represent an object. Secondly, we present a framework using high-order Monte Carlo Markov Chain which considers more information and performs more discriminative and efficient on moving objects than the traditional first-order particle filtering. Finally, an advanced sequential importance resampling is applied to estimate the posterior density and obtains the high-quality particles. To further gain the better samples, K-means clustering is used to select more typical particles, which reduces the computational cost. Both qualitative and quantitative evaluations on challenging image sequences demonstrate that the performance of our proposed algorithm is superior to the state-of-the-art methods. [ABSTRACT FROM AUTHOR]