Search

Background The use of filter paper as a simple, inexpensive tool for storage and transportation of blood, ‘Dried Blood Spots’ or Guthrie cards, for diagnostic assays is well-established. In contrast, there are a paucity of diagnostic evaluations of dried cerebrospinal fluid (CSF) spots. These have potential applications in low-resource settings, such as Laos, where laboratory facilities for central nervous system (CNS) diagnostics are only available in Vientiane. In Laos, a major cause of CNS infection is Japanese encephalitis virus (JEV). We aimed to develop a dried CSF spot protocol and to evaluate its diagnostic performance using the World Health Organisation recommended anti-JEV IgM antibody capture enzyme-linked immunosorbent assay (JEV MAC-ELISA). Methodology and Principal Findings Sample volumes, spotting techniques and filter paper type were evaluated using a CSF-substitute of anti-JEV IgM positive serum diluted in Phosphate Buffer Solution (PBS) to end-limits of detection by JEV MAC-ELISA. A conventional protocol, involving eluting one paper punch in 200μl PBS, did not detect the end-dilution, nor did multiple punches utilising diverse spotting techniques. However, pre-cut filter paper enabled saturation with five times the volume of CSF-substitute, sufficiently improving sensitivity to detect the end-dilution. The diagnostic accuracy of this optimised protocol was compared with routine, neat CSF in a pilot, retrospective study of JEV MAC-ELISA on consecutive CSF samples, collected 2009–15, from three Lao hospitals. In comparison to neat CSF, 132 CSF samples stored as dried CSF spots for one month at 25–30°C showed 81.6% (65.7–92.3 95%CI) positive agreement, 96.8% (91.0–99.3 95%CI) negative agreement, with a kappa coefficient of 0.81 (0.70–0.92 95%CI). Conclusions/Significance The novel design of pre-cut filter paper saturated with CSF could provide a useful tool for JEV diagnostics in settings with limited laboratory access. It has the potential to improve national JEV surveillance and inform vaccination policies. The saturation of filter paper has potential use in the wider context of pathogen detection, including dried spots for detecting other analytes in CSF, and other body fluids., Author Summary Japanese encephalitis virus infection is widespread in Asia, and primarily affects children in poor, rural areas. The virus spreads to the brain and spinal cord resulting in significant death and disability. Diagnosis requires testing for the immune response ‘antibody’ specific to Japanese encephalitis virus in the cerebrospinal fluid that surrounds the brain and spinal cord. However, in most areas where the infection occurs there are no laboratory facilities. In the absence of laboratory diagnosis, we have poor knowledge of the extent of the problem in these areas. Dried blood spots on filter paper have been used widely for many years as simple, cost-effective tools for transporting samples for testing. However, there have been few attempts at using dried cerebrospinal fluid spots. We developed a technique for using dried spots to store and test cerebrospinal fluid for antibodies to Japanese encephalitis virus. We compared the results of dried spots with routine neat cerebrospinal fluid in 132 patient samples, and demonstrated excellent agreement between the two tests. This novel method for saturating dried cerebrospinal fluid spots has the potential to enhance our knowledge of Japanese encephalitis virus epidemiology, and inform health policies where they are most needed. It could also be transferred for use in diagnosing other infectious diseases, including using other body fluid samples.

As more HIV-infected people gain access to antiretroviral therapy (ART), monitoring HIV drug resistance (HIVDR) becomes essential to combat both acquired and transmitted HIVDR. Studies have demonstrated dried blood spots (DBS) are a suitable alternative in HIVDR monitoring using DBS collected on Whatman 903 (W-903). In this study, we sought to evaluate two other commercially available filter papers, Ahlstrom 226 (A-226) and Munktell TFN (M-TFN), for HIVDR genotyping following ambient temperature storage. DBS were prepared from remnant blood specimens collected from 334 ART patients and stored at ambient temperature for a median time of 30 days. HIV-1 viral load was determined using NucliSENS EasyQ® HIV-1 v2.0 RUO test kits prior to genotyping of the protease and reverse transcriptase regions of the HIV-1 pol gene using an in-house assay. Among the DBS tested, 26 specimens had a viral load ≥ 1000 copies/mL in all three types of filter paper and were included in the genotyping analysis. Genotyping efficiencies were similar between DBS collected on W-903 (92.3%), A-226 (88.5%), and M-TFN (92.3%) filter papers (P = 1.00). We identified 50 DR-associated mutations in DBS collected on W-903, 33 in DBS collected on A-226, and 48 in DBS collected on M-TFN, resulting in mutation detection sensitivities of 66.0% for A-226 and 88.0% for M-TFN when compared to W-903. Our data indicate that differences among filter papers may exist at this storage condition and warrant further studies evaluating filter paper type for HIVDR monitoring.

The distinction between worker and reproductive castes of social insects is receiving increased attention from a developmental rather than adaptive perspective. In the wasp genus Polistes, colonies are founded by one or more females, and the female offspring that emerge in that colony are either non-reproducing workers or future reproductives of the following generation (gynes). A growing number of studies now indicate that workers emerge with activated reproductive physiology, whereas the future reproductive gynes do not. Low nourishment levels for larvae during the worker-rearing phase of the colony cycle and higher nourishment levels for larvae when gynes are reared are now strongly suspected of playing a major role in this difference. Here, we present the results of a laboratory rearing experiment in which Polistes metricus single foundresses were held in environmental conditions with a higher level of control than in any previously published study, and the amount of protein nourishment made available to feed larvae was the only input variable. Three experimental feeding treatments were tested: restricted, unrestricted, and hand-supplemented. Analysis of multiple response variables shows that wasps reared on restricted protein nourishment, which would be the case for wasps reared in field conditions that subsequently become workers, tend toward trait values that characterize active reproductive physiology. Wasps reared on unrestricted and hand-supplemented protein, which replicates higher feeding levels for larvae in field conditions that subsequently become gynes, tend toward trait values that characterize inactive reproductive physiology. Although the experiment was not designed to test for worker behavior per se, our results further implicate activated reproductive physiology as a developmental response to low larval nourishment as a fundamental aspect of worker behavior in Polistes.

India has the highest burden of Tuberculosis (TB) and multidrug-resistant TB (MDR-TB) worldwide. Innovative technology is the need of the hour to identify these cases that remain either undiagnosed or inadequately diagnosed due to the unavailability of appropriate tools at primary healthcare settings. We developed and evaluated 3 kits, namely ‘TB Detect’ (containing BioFM-Filter device), ‘TB Concentration and Transport’ (containing Trans-Filter device) and ‘TB DNA Extraction’ kits. These kits enable bio-safe equipment-free concentration of sputum on filters and improved fluorescence microscopy at primary healthcare centres, ambient temperature transport of dried inactivated sputum filters to central laboratories and molecular detection of drug resistance by PCR and DNA sequencing (Mol-DST). In a 2-site evaluation (n = 1190 sputum specimens) on presumptive TB patients, BioFM-Filter smear exhibited a significant increase in positivity of 7% and 4% over ZN smear and LED-FM smear (p

SettingSouth Africa has the third highest tuberculosis (TB) burden in the world. Intensified case finding, recommended by WHO, is one way to control TB.ObjectiveTo evaluate the effectiveness and acceptability of a paper slip method for TB contact tracing.MethodTB patients were offered paper slips to give to their contacts, inviting them for TB screening. The number of contacts screened and the proportion diagnosed with TB was calculated. Contacts that returned to the clinic after receiving the slips were interviewed. A focus group discussion (FGD) with TB patients was held to determine their acceptability.ResultsFrom 718 paper slips issued, a 26% TB contact tracing rate was found, with a 12% case detection rate. The majority (68%) of contacts were screened within 2 weeks of receiving the slip. Age and gender were not significantly associated with time to screening. 16% of the contacts screened did not reside with the TB patients. 98% of the contacts said the method was acceptable. FGD findings show that this method is acceptable and may prevent stigma associated with TB/HIV.ConclusionThis simple, inexpensive method yields high contact tracing and case detection rates and potentially would yield additional benefits outside households.

Background Loop mediated isothermal amplification (LAMP) provides an opportunity for improved, field-friendly detection of malaria infections in endemic areas. However data on the diagnostic accuracy of LAMP for active case detection, particularly low-density parasitaemias, are lacking. We therefore evaluated the performance of a new LAMP kit compared with PCR using DNA from filter paper blood spots. Methods and Findings Samples from 865 fever patients and 465 asymptomatic individuals collected in Zanzibar were analysed for Pan (all species) and Pf (P. falciparum) DNA with the Loopamp MALARIA Pan/Pf kit. Samples were amplified at 65°C for 40 minutes in a real-time turbidimeter and results were compared with nested PCR. Samples with discordant results between LAMP and nested PCR were analysed with real-time PCR. The real-time PCR corrected nested PCR result was defined as gold standard. Among the 117 (13.5%) PCR detected P. falciparum infections from fever patients (mean parasite density 7491/µL, range 6–782,400) 115, 115 and 111 were positive by Pan-LAMP, Pf-LAMP and nested PCR, respectively. The sensitivities were 98.3% (95%CI 94–99.8) for both Pan and Pf-LAMP. Among the 54 (11.6%) PCR positive samples from asymptomatic individuals (mean parasite density 10/µL, range 0–4972) Pf-LAMP had a sensitivity of 92.7% (95%CI 80.1–98.5) for detection of the 41 P. falciparum infections. Pan-LAMP had sensitivities of 97% (95%CI 84.2–99.9) and 76.9% (95%CI 46.2–95) for detection of P. falciparum and P. malariae, respectively. The specificities for both Pan and Pf-LAMP were 100% (95%CI 99.1–100) in both study groups. Conclusion Both components of the Loopamp MALARIA Pan/Pf detection kit revealed high diagnostic accuracy for parasite detection among fever patients and importantly also among asymptomatic individuals of low parasite densities from minute blood volumes preserved on filter paper. These data support LAMPs potential role for improved detection of low-density malaria infections in pre-elimination settings.

Phytoseiids are predatory mites that prey on other mites and small arthropods, and several species are used in commercial agriculture for biological control of pests. To optimize phytoseiid mites' use in biocontrol, an efficient method for oral delivery of test compounds is required to assess their sensitivities to pesticides, RNAi for gene functional analysis and artificial diets. Here we developed four methods for oral delivery of a solution of xenobiotics to different life stages of the commercially available generalist predatory mite Neoseiulus californicus: (i) soaking mites in the solution, or allowing them to feed on (ii) spider mites soaked in the solution, (iii) a solution droplet, or (iv) solution-saturated filter paper. As measured by ingestion of a tracer dye, the droplet-based feeding system was most efficient; the dye was observed in the alimentary canal of >90% test mites of all life stages, with no mortality. The droplet-based feeding system was also effective for the commercially available specialist predatory mite Phytoseiulus persimilis, with >80% delivery efficiency. This study paves the way for development of methods for high-throughput RNAi and for toxicological or nutritional assays in phytoseiid mites.

Novel chemistry for vector control is urgently needed to counter insecticide resistance in mosquitoes. Here a new meta-diamide insecticide, broflanilide (TENEBENALTM), was evaluated in East African experimental huts in Moshi, northern Tanzania. Two consecutive experimental hut trials with broflanilide 50WP were conducted; the first evaluating the efficacy of three concentrations, 50 mg/m2, 100 mg/m2, and 200 mg/m2 using a prototype formulation, and the second trial evaluating an improved formulation. The IRS treatments were applied on both mud and concrete surfaces and efficacy was monitored over time. The mortality, blood-feeding inhibition and exiting behaviour of free-flying wild mosquitoes was compared between treatment arms. Additionally, cone assays with pyrethroid-susceptible and resistant mosquito strains were conducted in the huts to determine residual efficacy. The first trial showed a dosage-mortality response of the prototype formulation and 3–8 months of residual activity, with longer activity on concrete than mud. The second trial with an improved formulation showed prolonged residual efficacy of the 100 mg/m2 concentration to 5–6 months on mud, and mosquito mortality on the concrete surface ranged between 94–100% for the full duration of the trial. In both trials, results with free-flying, wild Anopheles arabiensis echoed the mortality trend shown in cone assays, with the highest dose inducing the highest mortality and the improved formulation showing increased mortality rates. No blood-feeding inhibition or insecticide-induced exiting effects were observed with broflanilide. Broflanilide 50WP was effective against both susceptible and pyrethroid-resistant mosquito strains, demonstrating an absence of cross resistance between broflanilide and pyrethroids. The improved formulation, which has now been branded VECTRONTM T500, resulted in a prolonged residual efficacy. These results indicate the potential of this insecticide as an addition to the arsenal of IRS products needed to maintain both control of malaria and resistance management of malaria-transmitting mosquitoes.

As a means of obtaining reproducible and accurate numbers of larvae for laboratory rearing, we tested a large-particle flow-cytometer type device called the ‘Automated Particle Counter’ (APC). The APC is a gravity-fed, self-contained unit that detects changes in light intensity caused by larvae passing the detector in a water stream and controls dispensing by stopping the flow when the desired number has been reached. We determined the accuracy (number dispensed compared to the target value) and precision (distribution of number dispensed) of dispensing at a variety of counting sensitivity thresholds and larva throughput rates (larvae per second) using < 1-day old Anopheles gambiae and Aedes aegypti larvae. All measures were made using an APC algorithm called the ‘Smoothed Z-Score’ which allows the user to define how many standard deviations (Z scores) from the baseline light intensity a particle’s absorbance must exceed to register a count. We dispensed a target number of 100 An. gambiae larvae using Z scores from 2.5–8 and observed no difference among them in the numbers dispensed for scores from 2.5–6, however, scores of 7 and 8 under-counted (over-dispensed) larvae. Using a Z score ≤ 6, we determined the effect of throughput rate on the accuracy of the device to dispense An. gambiae larvae. For rates ≤ 98 larvae per second, the accuracy of dispensing a target of 100 larvae was - 2.29% ± 0.72 (95% CI of the mean) with a mode of 99 (49 of 348 samples). When using a Z score of 3.5 and rates ≤ 100 larvae per second, the accuracy of dispensing a target of 100 Ae. aegypti was - 2.43% ± 1.26 (95% CI of the mean) with a mode of 100 (6 of 42 samples). No effect on survival was observed on the number of An. gambiae first stage larvae that reached adulthood as a function of dispensing.

Engineering faster cellulose deconstruction is difficult because it is a complex, cooperative, multi-enzyme process. Here we use experimental evolution to select for populations of Trichoderma citrinoviride that deconstruct up to five-fold more cellulose. Ten replicate populations of T. citrinoviride were selected for growth on filter paper by serial culture. After 125 periods of growth and transfer to fresh media, the filter paper deconstruction increased an average of 2.5 fold. Two populations were examined in more detail. The activity of the secreted cellulase mixtures increased more than two-fold relative to the ancestor and the largest increase was in the extracellular β-glucosidase activity. qPCR showed at least 16-fold more transcribed RNA for egl4 (endoglucanase IV gene), cbh1 (cellobiohydrolase I gene) and bgl1 (extracellular β-glucosidase I gene) in selected populations as compared to the ancestor, and earlier peak expressions of these genes. Deep sequencing shows that the regulatory strategies used to alter cellulase secretion differ in the two strains. The improvements in cellulose deconstruction come from earlier expression of all cellulases and increased relative amount of β-glucosidase, but with small increases in the total secreted protein and therefore little increase in metabolic cost.

BACKGROUND: The development in the deinking process has made recycled fiber a major part of the raw material for pulp and paper industry. Enzymes have revolutionized the deinking process obtaining brightness levels surpassing conventional deinking processes. This study explores the deinking efficiencies of bacterial alkalophilic laccase (L) and xylanase (X) enzymes along with physical deinking methods of microwaving (MW) and sonication (S) for recycling of old newsprint (ONP). METHODS AND RESULTS: The operational parameters viz. enzyme dose, pH and treatment time for X and L deinking were optimized statistically using Response Surface Methodology. Laccase did not require any mediator supplementation for deinking. Deinking of ONP pulp with a combination of xylanase and laccase enzymes was investigated, and fiber surface composition and morphological changes were studied using X-ray diffraction, fourier transform infrared spectroscopy and scanning electron microscopy. Compared to the pulp deinked with xylanase (47.9%) or laccase (62.2%) individually, the percentage reduction of effective residual ink concentration (ERIC) was higher for the combined xylanase/laccase-deinked pulp (65.8%). An increase in brightness (21.6%), breaking length (16.5%), burst factor (4.2%) tear factor (6.9%), viscosity (13%) and cellulose crystallinity (10.3%) along with decrease in kappa number (22%) and chemical consumption (50%) were also observed. Surface appeared more fibrillar along with changes in surface functional groups. A combination of physical and enzymatic processes (S-MW-XL) for deinking further improved brightness (28.8%) and decreased ERIC (73.9%) substantially. CONCLUSION: This is the first report on deinking of ONP with laccase without any mediator supplementation. XL pretreatment resulted in marked improvement in paper quality and a new sequence being reported for deinking (S-MW-XL) will contribute further in decreasing chemical consumption and making the process commercially feasible.

Deconstruction of the cellulose in plant cell walls is critical for carbon flow through ecosystems and for the production of sustainable cellulosic biofuels. Our understanding of cellulose deconstruction is largely limited to the study of microbes in isolation, but in nature, this process is driven by microbes within complex communities. In Neotropical forests, microbes in leaf-cutter ant refuse dumps are important for carbon turnover. These dumps consist of decaying plant material and a diverse bacterial community, as shown here by electron microscopy. To study the portion of the community capable of cellulose degradation, we performed enrichments on cellulose using material from five Atta colombica refuse dumps. The ability of enriched communities to degrade cellulose varied significantly across refuse dumps. 16S rRNA gene amplicon sequencing of enriched samples identified that the community structure correlated with refuse dump and with degradation ability. Overall, samples were dominated by Bacteroidetes, Gammaproteobacteria, and Betaproteobacteria. Half of abundant operational taxonomic units (OTUs) across samples were classified within genera containing known cellulose degraders, including Acidovorax, the most abundant OTU detected across samples, which was positively correlated with cellulolytic ability. A representative Acidovorax strain was isolated, but did not grow on cellulose alone. Phenotypic and compositional analyses of enrichment cultures, such as those presented here, help link community composition with cellulolytic ability and provide insight into the complexity of community-based cellulose degradation. Biological and Environmental Research/[DE-FC02-07ER64494]/BER/Estados Unidos National Science Foundation/[DGE-1256259]/NSF/Estados Unidos National Science Foundation/[DEB-0747002]/NSF/Estados Unidos National Science Foundation/[MCB-0702025]/NSF/Estados Unidos National Institutes of Health/[T32 GM07215]/NIH/Estados Unidos Universidad de Costa Rica/[]/UCR/Costa Rica Ministerio de Ciencia, Tecnología y Telecomunicaciones/[]/MICITT/Costa Rica University of Wisconsin-Madison's Hilldale Undergraduate Faculty Research Fellowship/[]//Estados Unidos UCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias Básicas::Centro de Investigación en Biología Celular y Molecular (CIBCM)

Background Accurate and efficient detection of sub-microscopic malaria infections is crucial for enabling rapid treatment and interruption of transmission. Commercially available malaria LAMP kits have excellent diagnostic performance, though throughput is limited by the need to prepare samples individually. Here, we evaluate the clinical performance of a newly developed high throughput (HTP) sample processing system for use in conjunction with the Eiken malaria LAMP kit. Methods The HTP system utilised dried blood spots (DBS) and liquid whole blood (WB), with parallel sample processing of 94 samples per run. The system was evaluated using 699 samples of known infection status pre-determined by gold standard nested PCR. Results The sensitivity and specificity of WB-HTP-LAMP was 98.6% (95% CI, 95.7–100), and 99.7% (95% CI, 99.2–100); sensitivity of DBS-HTP-LAMP was 97.1% (95% CI, 93.1–100), and specificity 100% against PCR. At parasite densities greater or equal to 2 parasites/μL, WB and DBS HTP-LAMP showed 100% sensitivity and specificity against PCR. At densities less than 2 p/μL, WB-HTP-LAMP sensitivity was 88.9% (95% CI, 77.1–100) and specificity was 99.7% (95% CI, 99.2–100); sensitivity and specificity of DBS-HTP-LAMP was 77.8% (95% CI, 54.3–99.5) and 100% respectively. Conclusions The HTP-LAMP system is a highly sensitive diagnostic test, with the potential to allow large scale population screening in malaria elimination campaigns.

Recent advancements in genomics provide new tools for evolutionary ecological research. The paper wasp genus Polistes is a model for social insect evolution and behavioral ecology. We developed RNA interference (RNAi)-mediated gene silencing to explore proposed connections between expression of hexameric storage proteins and worker vs. gyne (potential future foundress) castes in naturally-founded colonies of P. metricus. We extended four fragments of putative hexamerin-encoding P. metricus transcripts acquired from a previous study and fully sequenced a gene that encodes Hexamerin 2, one of two proposed hexameric storage proteins of P. metricus. MALDI-TOF/TOF, LC-MSMS, deglycosylation, and detection of phosphorylation assays showed that the two putative hexamerins diverge in peptide sequence and biochemistry. We targeted the hexamerin 2 gene in 5th (last)-instar larvae by feeding RNAi-inducing double-stranded hexamerin 2 RNA directly to larvae in naturally-founded colonies in the field. Larval development and adult traits were not significantly altered in hexamerin 2 knockdowns, but there were suggestive trends toward increased developmental time and less developed ovaries, which are gyne characteristics. By demonstrating how data acquisition from 454/Roche pyrosequencing can be combined with biochemical and proteomics assays and how RNAi can be deployed successfully in field experiments on Polistes, our results pave the way for functional genomic research that can contribute significantly to learning the interactions of environment, development, and the roles they play in paper wasp evolution and behavioral ecology. publishedVersion

Non-native bark and ambrosia beetles represent a threat to forests worldwide. Their invasion patterns are, however, still unclear. Here we investigated first, if the spread of non-native bark and ambrosia beetles is a gradual or a discontinuous process; second, which are the main correlates of their community structure; third, whether those correlates correspond to those of native species. We used data on species distribution of non-native and native scolytines in the continental 48 USA states. These data were analyzed through a beta-diversity index, partitioned into species richness differences and species replacement, using Mantel correlograms and non-metric multidimensional scaling (NMDS) ordination for identifying spatial patterns, and regression on distance matrices to test the association of climate (temperature, rainfall), forest (cover area, composition), geographical (distance), and human-related (import) variables with β-diversity components. For both non-native bark and ambrosia beetles, β-diversity was mainly composed of species richness difference than species replacement. For non-native bark beetles, a discontinuous invasion process composed of long distance jumps or multiple introduction events was apparent. Species richness differences were primarily correlated with differences in import values while temperature was the main correlate of species replacement. For non-native ambrosia beetles, a more continuous invasion process was apparent, with the pool of non-native species arriving in the coastal areas that tended to be filtered as they spread to interior portions of the continental USA. Species richness differences were mainly correlated with differences in rainfall among states, while rainfall and temperature were the main correlates of species replacement. Our study suggests that the different ecology of bark and ambrosia beetles influences their invasion process in new environments. The lower dependency that bark beetles have on climate allowed them to potentially colonize more areas within the USA, while non-native ambrosia beetles, being dependent on rainfall, are typically filtered by the environment.

Cutaneous and mucosal leishmaniasis is widely distributed in Central and South America. Leishmania of the Viannia subgenus are the most frequent species infecting humans. L. (V.) braziliensis, L. (V.) panamensis are also responsible for metastatic mucosal leishmaniasis. Conventional or real time PCR is a more sensitive diagnostic test than microscopy, but the cost and requirement for infrastructure and trained personnel makes it impractical in most endemic regions. Primary health systems need a sensitive and specific point of care (POC) diagnostic tool. We developed a novel POC molecular diagnostic test for cutaneous leishmaniasis caused by Leishmania (Viannia) spp. Parasite DNA was amplified using isothermal Recombinase Polymerase Amplification (RPA) with primers and probes that targeted the kinetoplast DNA. The amplification product was detected by naked eye with a lateral flow (LF) immunochromatographic strip. The RPA-LF had an analytical sensitivity equivalent to 0.1 parasites per reaction. The test amplified the principal L. Viannia species from multiple countries: L. (V.) braziliensis (n = 33), L. (V.) guyanensis (n = 17), L. (V.) panamensis (n = 9). The less common L. (V.) lainsoni, L. (V.) shawi, and L. (V.) naiffi were also amplified. No amplification was observed in parasites of the L. (Leishmania) subgenus. In a small number of clinical samples (n = 13) we found 100% agreement between PCR and RPA-LF. The high analytical sensitivity and clinical validation indicate the test could improve the efficiency of diagnosis, especially in chronic lesions with submicroscopic parasite burdens. Field implementation of the RPA-LF test could contribute to management and control of cutaneous and mucosal leishmaniasis., Author Summary Cutaneous leishmaniasis is a parasitic disease transmitted by the bite of sandflies that produces skin ulcers. The severe, disfiguring form of the disease is characterized by parasite dissemination to the mucosa of the nose and palate. Current diagnosis is based on microscopy which has low sensitivity in chronic cases. Molecular methods (PCR) that detect parasite DNA are highly sensitive but costs and personnel training make it impossible to implement it in resource-limited areas. We developed a novel molecular method (RPA-LF) that could be applied in the field because it does not require sophisticated equipment. It is also very sensitive and specific to detect the principal Leishmania species that produce cutaneous leishmaniasis in Latin America. Future field implementation of RPA-LF could have a positive impact on disease management and control.

Background Traditional methods of detecting Leishmania from cutaneous lesions involve invasive diagnostic procedures, such as scrapings, which cause discomfort, require technical expertise, and carry risks of invasive procedures. We compared the performance of 2 novel, molecular-based non-invasive methods for the diagnosis of cutaneous leishmaniasis (CL). Methods Consecutive patients presenting to the Leishmania Clinic at the Hospital Nacional Cayetano Heredia were enrolled. PCR was performed on filter paper lesion impressions (FPLIs), cytology brushes, and lancets for detection of Leishmania DNA. Smears from lesion scrapings and leishmanin skin test were also performed. Outcome measures were sensitivity and specificity. Composite reference standard was any 2 of 5 tests positive. Species identification was performed by PCR assays of positive specimens. Results Ninety patients with 129 lesions were enrolled, 117 of which fulfilled reference criteria for a diagnosis of CL. Of these 117 lesions, 113 were positive by PCR of lancets used for lesion scrapings versus 116 by PCR of FPLIs (p = 0.930) or 116 by PCR of cytology brushes (p = 0.930). Sensitivity and specificity of PCR on lancets were 96.6% [95% CI 93.3–99.9%] and 100%, respectively. Sensitivity and specificity of FPLI PCR were 99.1% [95% CI 97.4–100%] and 100%, respectively. Sensitivity and specificity of cytology brush PCR were 99.1% [95% CI 97.4–100%] and 100%, respectively. Giemsa-stained lesion smear and leishmanin skin test had inferior sensitivities at 47.9% [95% CI 38.9–57.0%] and 82.3% [95% CI 73.9–90.7%], respectively, compared to PCR of invasive or non-invasive specimens (p

The storage of renewable electrical energy within chemical bonds of biofuels and other chemicals is a route to decreasing petroleum usage. A critical challenge is the efficient transfer of electrons into a biological host that can covert this energy into high energy organic compounds. In this paper, we describe an approach whereby biomass is grown using energy obtained from a soluble mediator that is regenerated electrochemically. The net result is a separate-stage reverse microbial fuel cell (rMFC) that fixes CO2 into biomass using electrical energy. We selected ammonia as a low cost, abundant, safe, and soluble redox mediator that facilitated energy transfer to biomass. Nitrosomonas europaea, a chemolithoautotroph, was used as the biocatalyst due to its inherent capability to utilize ammonia as its sole energy source for growth. An electrochemical reactor was designed for the regeneration of ammonia from nitrite, and current efficiencies of 100% were achieved. Calculations indicated that overall bioproduction efficiency could approach 2.7±0.2% under optimal electrolysis conditions. The application of chemolithoautotrophy for industrial bioproduction has been largely unexplored, and results suggest that this and related rMFC platforms may enable biofuel and related biochemical production.

The paper wasp Polistes dominulus is unique among the social insects in that nearly one-third of co-foundresses are completely unrelated to the dominant individual whose offspring they help to rear and yet reproductive skew is high. These unrelated subordinates stand to gain direct fitness through nest inheritance, raising the question of whether their behaviour is adaptively tailored towards maximizing inheritance prospects. Unusually, in this species, a wealth of theory and empirical data allows us to predict how unrelated subordinates should behave. Based on these predictions, here we compare helping in subordinates that are unrelated or related to the dominant wasp across an extensive range of field-based behavioural contexts. We find no differences in foraging effort, defense behaviour, aggression or inheritance rank between unrelated helpers and their related counterparts. Our study provides no evidence, across a number of behavioural scenarios, that the behaviour of unrelated subordinates is adaptively modified to promote direct fitness interests.\ud \ud

Foodborne illnesses occur in both industrialized and developing countries, and may be increasing due to rapidly evolving food production practices. Yet some primary tools used to assess food safety are decades, if not centuries, old. To improve the time to result for food safety assessment a sensitive flow cytometer based system to detect microbial contamination was developed. By eliminating background fluorescence and improving signal to noise the assays accurately measure bacterial load or specifically identify pathogens. These assays provide results in minutes or, if sensitivity to one cell in a complex matrix is required, after several hours enrichment. Conventional assessments of food safety require 48 to 56 hours. The assays described within are linear over 5 orders of magnitude with results identical to culture plates, and report live and dead microorganisms. This system offers a powerful approach to real-time assessment of food safety, useful for industry self-monitoring and regulatory inspection.

Efficiency of solar based disinfection of Pseudomonas aeruginosa (P. aeruginosa) in rooftop harvested rainwater was evaluated aiming the potability of rainwater. The rainwater samples were exposed to direct sunlight for about 8-9 hours and the effects of water temperature (°C), sunlight irradiance (W/m2), different rear surfaces of polyethylene terephthalate bottles, variable microbial concentrations, pH and turbidity were observed on P. aeruginosa inactivation at different weathers. In simple solar disinfection (SODIS), the complete inactivation of P. aeruginosa was obtained only under sunny weather conditions (>50°C and >700 W/m2) with absorptive rear surface. Solar collector disinfection (SOCODIS) system, used to improve the efficiency of simple SODIS under mild and weak weather, completely inactivated the P. aeruginosa by enhancing the disinfection efficiency of about 20% only at mild weather. Both SODIS and SOCODIS systems, however, were found inefficient at weak weather. Different initial concentrations of P. aeruginosa and/or Escherichia coli had little effects on the disinfection efficiency except for the SODIS with highest initial concentrations. The inactivation of P. aeruginosa increased by about 10-15% by lowering the initial pH values from 10 to 3. A high initial turbidity, adjusted by adding kaolin, adversely affected the efficiency of both systems and a decrease, about 15-25%; in inactivation of P. aeruginosa was observed. The kinetics of this study was investigated by Geeraerd Model for highlighting the best disinfection system based on reaction rate constant. The unique detailed investigation of P. aeruginosa disinfection with sunlight based disinfection systems under different weather conditions and variable parameters will help researchers to understand and further improve the newly invented SOCODIS system.

Decreasing lignin content of plant biomass by genetic engineering is believed to mitigate biomass recalcitrance and improve saccharification efficiency of plant biomass. In this study, we compared two different pretreatment methods (i.e., dilute acid and cellulose solvent) on transgenic plant biomass samples having different lignin contents and investigated biomass saccharification efficiency. Without pretreatment, no correlation was observed between lignin contents of plant biomass and saccharification efficiency. After dilute acid pretreatment, a strong negative correlation between lignin content of plant samples and overall glucose release was observed, wherein the highest overall enzymatic glucan digestibility was 70% for the low-lignin sample. After cellulose solvent- and organic solvent-based lignocellulose fractionation pretreatment, there was no strong correlation between lignin contents and high saccharification efficiencies obtained (i.e., 80-90%). These results suggest that the importance of decreasing lignin content in plant biomass to saccharification was largely dependent on pretreatment choice and conditions.

Microalgae have been widely reported as a promising source of biofuels, mainly based on their high areal productivity of biomass and lipids as triacylglycerides and the possibility for cultivation on non-arable land. The isolation and selection of suitable strains that are robust and display high growth and lipid accumulation rates is an important prerequisite for their successful cultivation as a bioenergy source, a process that can be compared to the initial selection and domestication of agricultural crops. We developed standard protocols for the isolation and cultivation for a range of marine and brackish microalgae. By comparing growth rates and lipid productivity, we assessed the potential of subtropical coastal and brackish microalgae for the production of biodiesel and other oil-based bioproducts. This study identified Nannochloropsis sp., Dunaniella salina and new isolates of Chlorella sp. and Tetraselmis sp. as suitable candidates for a multiple-product algae crop. We conclude that subtropical coastal microalgae display a variety of fatty acid profiles that offer a wide scope for several oil-based bioproducts, including biodiesel and omega-3 fatty acids. A biorefinery approach for microalgae would make economical production more feasible but challenges remain for efficient harvesting and extraction processes for some species.

Slaughterhouse wastewater contains various and high amounts of organic matter (e.g., proteins, blood, fat and lard). In order to produce an effluent suitable for stream discharge, chemical coagulation and electrocoagulation techniques have been particularly explored at the laboratory pilot scale for organic compounds removal from slaughterhouse effluent. The purpose of this work was to investigate the feasibility of treating cattle-slaughterhouse wastewater by combined chemical coagulation and electrocoagulation process to achieve the required standards. The influence of the operating variables such as coagulant dose, electrical potential and reaction time on the removal efficiencies of major pollutants was determined. The rate of removal of pollutants linearly increased with increasing doses of PACl and applied voltage. COD and BOD(5) removal of more than 99% was obtained by adding 100 mg/L PACl and applied voltage 40 V. The experiments demonstrated the effectiveness of chemical and electrochemical techniques for the treatment of slaughterhouse wastewaters. Consequently, combined processes are inferred to be superior to electrocoagulation alone for the removal of both organic and inorganic compounds from cattle-slaughterhouse wastewater.