Search

Biometric recognition technology based on eye-movement dynamics has been in development for more than ten years. Different visual tasks, feature extraction and feature recognition methods are proposed to improve the performance of eye movement biometric system. However, the correct identification and verification rates, especially in long-term experiments, as well as the effects of visual tasks and eye trackers’ temporal and spatial resolution are still the foremost considerations in eye movement biometrics. With a focus on these issues, we proposed a new visual searching task for eye movement data collection and a new class of eye movement features for biometric recognition. In order to demonstrate the improvement of this visual searching task being used in eye movement biometrics, three other eye movement feature extraction methods were also tested on our eye movement datasets. Compared with the original results, all three methods yielded better results as expected. In addition, the biometric performance of these four feature extraction methods was also compared using the equal error rate (EER) and Rank-1 identification rate (Rank-1 IR), and the texture features introduced in this paper were ultimately shown to offer some advantages with regard to long-term stability and robustness over time and spatial precision. Finally, the results of different combinations of these methods with a score-level fusion method indicated that multi-biometric methods perform better in most cases. [ABSTRACT FROM AUTHOR]

In the Bayesian Reinforcement Learning (BRL) setting, agents try to maximise the collected rewards while interacting with their environment while using some prior knowledge that is accessed beforehand. Many BRL algorithms have already been proposed, but the benchmarks used to compare them are only relevant for specific cases. The paper addresses this problem, and provides a new BRL comparison methodology along with the corresponding open source library. In this methodology, a comparison criterion that measures the performance of algorithms on large sets of Markov Decision Processes (MDPs) drawn from some probability distributions is defined. In order to enable the comparison of non-anytime algorithms, our methodology also includes a detailed analysis of the computation time requirement of each algorithm. Our library is released with all source code and documentation: it includes three test problems, each of which has two different prior distributions, and seven state-of-the-art RL algorithms. Finally, our library is illustrated by comparing all the available algorithms and the results are discussed. [ABSTRACT FROM AUTHOR]

Outlier removal is a fundamental data processing task to ensure the quality of scanned point cloud data (PCD), which is becoming increasing important in industrial applications and reverse engineering. Acquired scanned PCD is usually noisy, sparse and temporarily incoherent. Thus the processing of scanned data is typically an ill-posed problem. In the paper, we present a simple and effective method based on two geometrical characteristics constraints to trim the noisy points. One of the geometrical characteristics is the local density information and another is the deviation from the local fitting plane. The local density based method provides a preprocessing step, which could remove those sparse outlier and isolated outlier. The non-isolated outlier removal in this paper depends on a local projection method, which placing those points onto objects. There is no doubt that the deviation of any point from the local fitting plane should be a criterion to reduce the noisy points. The experimental results demonstrate the ability to remove the noisy point from various man-made objects consisting of complex outlier. [ABSTRACT FROM AUTHOR]

In developing nations, many expanding cities are facing challenges that result from the overwhelming numbers of people and vehicles. Collecting real-time, reliable and precise traffic flow information is crucial for urban traffic management. The main purpose of this paper is to develop an adaptive model that can assess the real-time vehicle counts on urban roads using computer vision technologies. This paper proposes an automatic real-time background update algorithm for vehicle detection and an adaptive pattern for vehicle counting based on the virtual loop and detection line methods. In addition, a new robust detection method is introduced to monitor the real-time traffic congestion state of road section. A prototype system has been developed and installed on an urban road for testing. The results show that the system is robust, with a real-time counting accuracy exceeding 99% in most field scenarios. [ABSTRACT FROM AUTHOR]

This paper aims to optimize a desirable fare structure for the public transit service along a bus-subway corridor with the consideration of those factors related to equity in trip, including travel distance and comfort level. The travel distance factor is represented by the distance-based fare strategy, which is an existing differential strategy. The comfort level one is considered in the area-based fare strategy which is a new differential strategy defined in this paper. Both factors are referred to by the combined fare strategy which is composed of distance-based and area-based fare strategies. The flat fare strategy is applied to determine a reference level of social welfare and obtain the general passenger flow along transit lines, which is used to divide areas or zones along the corridor. This problem is formulated as a bi-level program, of which the upper level maximizes the social welfare and the lower level capturing traveler choice behavior is a variable-demand stochastic user equilibrium assignment model. A genetic algorithm is applied to solve the bi-level program while the method of successive averages is adopted to solve the lower-level model. A series of numerical experiments are carried out to illustrate the performance of the models and solution methods. Numerical results indicate that all three differential fare strategies play a better role in enhancing the social welfare than the flat fare strategy and that the fare structure under the combined fare strategy generates the highest social welfare and the largest resulting passenger demand, which implies that the more equity factors a differential fare strategy involves the more desirable fare structure the strategy has. [ABSTRACT FROM AUTHOR]

In the existing centralized location services system structure, the server is easily attracted and be the communication bottleneck. It caused the disclosure of users’ location. For this, we presented a new distributed collaborative recommendation strategy that is based on the distributed system. In this strategy, each node establishes profiles of their own location information. When requests for location services appear, the user can obtain the corresponding location services according to the recommendation of the neighboring users’ location information profiles. If no suitable recommended location service results are obtained, then the user can send a service request to the server according to the construction of a k-anonymous data set with a centroid position of the neighbors. In this strategy, we designed a new model of distributed collaborative recommendation location service based on the users’ location information profiles and used generalization and encryption to ensure the safety of the user’s location information privacy. Finally, we used the real location data set to make theoretical and experimental analysis. And the results show that the strategy proposed in this paper is capable of reducing the frequency of access to the location server, providing better location services and protecting better the user’s location privacy. [ABSTRACT FROM AUTHOR]

Product aspect recognition is a key task in fine-grained opinion mining. Current methods primarily focus on the extraction of aspects from the product reviews. However, it is also important to cluster synonymous extracted aspects into the same category. In this paper, we focus on the problem of product aspect clustering. The primary challenge is to properly cluster and generalize aspects that have similar meanings but different representations. To address this problem, we learn two types of background knowledge for each extracted aspect based on two types of effective aspect relations: relevant aspect relations and irrelevant aspect relations, which describe two different types of relationships between two aspects. Based on these two types of relationships, we can assign many relevant and irrelevant aspects into two different sets as the background knowledge to describe each product aspect. To obtain abundant background knowledge for each product aspect, we can enrich the available information with background knowledge from the Web. Then, we design a hierarchical clustering algorithm to cluster these aspects into different groups, in which aspect similarity is computed using the relevant and irrelevant aspect sets for each product aspect. Experimental results obtained in both camera and mobile phone domains demonstrate that the proposed product aspect clustering method based on two types of background knowledge performs better than the baseline approach without the use of background knowledge. Moreover, the experimental results also indicate that expanding the available background knowledge using the Web is feasible. [ABSTRACT FROM AUTHOR]

In business replenishment, discount offers of multi-item may either provide different discount schedules with a single discount type, or provide schedules with multiple discount types. The paper investigates the joint effects of multiple discount schemes on the decisions of multi-item joint replenishment. In this paper, a joint replenishment problem (JRP) model, considering three discount (all-unit discount, incremental discount, total volume discount) offers simultaneously, is constructed to determine the basic cycle time and joint replenishment frequencies of multi-item. To solve the proposed problem, a heuristic algorithm is proposed to find the optimal solutions and the corresponding total cost of the JRP model. Numerical experiment is performed to test the algorithm and the computational results of JRPs under different discount combinations show different significance in the replenishment cost reduction. [ABSTRACT FROM AUTHOR]

Public transport (PT) is a key element in most major cities around the world. With the development of smartphones, available journey planning information is becoming an integral part of the PT system. Each traveler has specific preferences when undertaking a trip, and these preferences can also be reflected on the smartphone. This paper considers transit assignment in urban public-transport networks in which the passengers receive smartphone-based information containing elements that might influence the travel decisions in relation to line loads, as well as passenger benefits, and the paper discusses the transition from the current widespread choosing approach to a personalized decision-making approach based on smartphone information. The approach associated with smartphone guidance that considers passengers’ preference on travel time, waiting time and transfer is proposed in the process of obtaining his/her preferred route from the potential travel routes generated by the Deep First Search (DFS) method. Two other approaches, based on the scenarios reflecting reality, include passengers with access to no real time information, and passengers that only have access to the arrival time at the platform are used as comparisons. For illustration, the same network proposed by Spiess and Florian is utilized on the experiments in an agent-based model. Two experiments are conducted respectively according to whether each passenger’s choosing method is consistent. As expected, the results in the first experiment showed that the travel for consistent passengers with smartphone guidance was clearly shorter and that it can reduce travel time exceeding 15% and weighted cost exceeding 20%, and the average saved time approximated 3.88 minutes per passenger. The second experiment presented that travel cost, as well as cost savings, gradually decreased by employing smartphone guidance, and the maximum cost savings accounted for 14.2% of the total weighted cost. [ABSTRACT FROM AUTHOR]

Pruning is applied in order to combat over-fitting problem where the tree is pruned back with the goal of identifying decision tree with the lowest error rate on previously unobserved instances, breaking ties in favour of smaller trees with high accuracy. In this paper, pruning with Bayes minimum risk is introduced for estimating the risk-rate. This method proceeds in a bottom-up fashion converting a parent node of a subtree to a leaf node if the estimated risk-rate of the parent node for that subtree is less than the risk-rates of its leaf. This paper proposes a post-pruning method that considers various evaluation standards such as attribute selection, accuracy, tree complexity, and time taken to prune the tree, precision/recall scores, TP/FN rates and area under ROC. The experimental results show that the proposed method produces better classification accuracy and its complexity is not much different than the complexities of reduced-error pruning and minimum-error pruning approaches. The experiments also demonstrate that the proposed method shows satisfactory performance in terms of precision score, recall score, TP rate, FP rate and area under ROC. [ABSTRACT FROM AUTHOR]

Traffic surveillance systems are interesting to many researchers to improve the traffic control and reduce the risk caused by accidents. In this area, many published works are only concerned about vehicle detection in normal conditions. The camera may vibrate due to wind or bridge movement. Detection and tracking of vehicles is a very difficult task when we have bad weather conditions in winter (snowy, rainy, windy, etc.), dusty weather in arid and semi-arid regions, at night, etc. Also, it is very important to consider speed of vehicles in the complicated weather condition. In this paper, we improved our method to track and count vehicles in dusty weather with vibrating camera. For this purpose, we used a background subtraction based strategy mixed with an extra processing to segment vehicles. In this paper, the extra processing included the analysis of the headlight size, location, and area. In our work, tracking was done between consecutive frames via a generalized particle filter to detect the vehicle and pair the headlights using the connected component analysis. So, vehicle counting was performed based on the pairing result, with Centroid of each blob we calculated distance between two frames by simple formula and hence dividing it by the time between two frames obtained from the video. Our proposed method was tested on several video surveillance records in different conditions such as dusty or foggy weather, vibrating camera, and in roads with medium-level traffic volumes. The results showed that the new proposed method performed better than our previously published method and other methods, including the Kalman filter or Gaussian model, in different traffic conditions. [ABSTRACT FROM AUTHOR]

Urban spaces have a great impact on how people’s emotion and behaviour. There are number of factors that impact our brain responses to a space. This paper presents a novel urban place recommendation approach, that is based on modelling in-situ EEG data. The research investigations leverages on newly affordable Electroencephalogram (EEG) headsets, which has the capability to sense mental states such as meditation and attention levels. These emerging devices have been utilized in understanding how human brains are affected by the surrounding built environments and natural spaces. In this paper, mobile EEG headsets have been used to detect mental states at different types of urban places. By analysing and modelling brain activity data, we were able to classify three different places according to the mental state signature of the users, and create an association map to guide and recommend people to therapeutic places that lessen brain fatigue and increase mental rejuvenation. Our mental states classifier has achieved accuracy of (%90.8). NeuroPlace breaks new ground not only as a mobile ubiquitous brain monitoring system for urban computing, but also as a system that can advise urban planners on the impact of specific urban planning policies and structures. We present and discuss the challenges in making our initial prototype more practical, robust, and reliable as part of our on-going research. In addition, we present some enabling applications using the proposed architecture. [ABSTRACT FROM AUTHOR]

Introducing electric vehicles (EVs) into urban transportation network brings higher requirement on travel time reliability and charging reliability. Specifically, it is believed that travel time reliability is a key factor influencing travelers’ route choice. Meanwhile, due to the limited cruising range, EV drivers need to better learn about the required energy for the whole trip to make decisions about whether charging or not and where to charge (i.e., charging reliability). Since EV energy consumption is highly related to travel speed, network uncertainty affects travel time and charging demand estimation significantly. Considering the network uncertainty resulted from link degradation, which influences the distribution of travel demand on transportation network and the energy demand on power network, this paper aims to develop a reliability-based network equilibrium framework for accommodating degradable road conditions with the addition of EVs. First, based on the link travel time distribution, the mean and variance of route travel time and monetary expenses related to energy consumption are deduced, respectively. And the charging time distribution of EVs with charging demand is also estimated. Then, a nested structure is considered to deal with the difference of route choice behavior derived by the different uncertainty degrees between the routes with and without degradable links. Given the expected generalized travel cost and a psychological safety margin, a traffic assignment model with the addition of EVs is formulated. Subsequently, a heuristic solution algorithm is developed to solve the proposed model. Finally, the effects of travelers’ risk attitude, network degradation degree, and EV penetration rate on network performance are illustrated through an example network. The numerical results show that the difference of travelers’ risk attitudes does have impact on the route choice, and the widespread adoption of EVs can cut down the total system travel cost effectively when the transportation network is more reliable. [ABSTRACT FROM AUTHOR]

The Grid scheduler, schedules user jobs on the best available resource in terms of resource characteristics by optimizing job execution time. Resource failure in Grid is no longer an exception but a regular occurring event as resources are increasingly being used by the scientific community to solve computationally intensive problems which typically run for days or even months. It is therefore absolutely essential that these long-running applications are able to tolerate failures and avoid re-computations from scratch after resource failure has occurred, to satisfy the user’s Quality of Service (QoS) requirement. Job Scheduling with Fault Tolerance in Grid Computing using Ant Colony Optimization is proposed to ensure that jobs are executed successfully even when resource failure has occurred. The technique employed in this paper, is the use of resource failure rate, as well as checkpoint-based roll back recovery strategy. Check-pointing aims at reducing the amount of work that is lost upon failure of the system by immediately saving the state of the system. A comparison of the proposed approach with an existing Ant Colony Optimization (ACO) algorithm is discussed. The experimental results of the implemented Fault Tolerance scheduling algorithm show that there is an improvement in the user’s QoS requirement over the existing ACO algorithm, which has no fault tolerance integrated in it. The performance evaluation of the two algorithms was measured in terms of the three main scheduling performance metrics: makespan, throughput and average turnaround time. [ABSTRACT FROM AUTHOR]

Vision-based vehicle detection is an important issue for advanced driver assistance systems. In this paper, we presented an improved multi-vehicle detection and tracking method using cascade Adaboost and Adaptive Kalman filter(AKF) with target identity awareness. A cascade Adaboost classifier using Haar-like features was built for vehicle detection, followed by a more comprehensive verification process which could refine the vehicle hypothesis in terms of both location and dimension. In vehicle tracking, each vehicle was tracked with independent identity by an Adaptive Kalman filter in collaboration with a data association approach. The AKF adaptively adjusted the measurement and process noise covariance through on-line stochastic modelling to compensate the dynamics changes. The data association correctly assigned different detections with tracks using global nearest neighbour(GNN) algorithm while considering the local validation. During tracking, a temporal context based track management was proposed to decide whether to initiate, maintain or terminate the tracks of different objects, thus suppressing the sparse false alarms and compensating the temporary detection failures. Finally, the proposed method was tested on various challenging real roads, and the experimental results showed that the vehicle detection performance was greatly improved with higher accuracy and robustness. [ABSTRACT FROM AUTHOR]

In big data area a significant challenge about string similarity join is to find all similar pairs more efficiently. In this paper, we propose a parallel processing framework for efficient string similarity join. First, the input is split into some disjoint small subsets according to the joint frequency distribution and the interval distribution of strings. Then the filter-verification strategy is adopted in the computation of string similarity for each subset so that the number of candidate pairs is reduced before an effective pruning strategy is used to improve the performance. Finally, the operation of string join is executed in parallel. Para-Join algorithm based on the multi-threading technique is proposed to implement the framework in a multi-core system while Pada-Join algorithm based on Spark platform is proposed to implement the framework in a cluster system. We prove that Para-Join and Pada-Join cannot only avoid reduplicate computation but also ensure the completeness of the result. Experimental results show that Para-Join can achieve high efficiency and significantly outperform than state-of-the-art approaches, meanwhile, Pada-Join can work on large datasets. [ABSTRACT FROM AUTHOR]

A Mesh topology is one of the most promising architecture due to its regular and simple structure for on-chip communication. Performance of mesh topology degraded greatly by increasing the network size due to small bisection width and large network diameter. In order to overcome this limitation, many researchers presented modified Mesh design by adding some extra links to improve its performance in terms of network latency and power consumption. The Cross-By-Pass-Mesh was presented by us as an improved version of Mesh topology by intelligent addition of extra links. This paper presents an efficient topology named Cross-By-Pass-Torus for further increase in the performance of the Cross-By-Pass-Mesh topology. The proposed design merges the best features of the Cross-By-Pass-Mesh and Torus, to reduce the network diameter, minimize the average number of hops between nodes, increase the bisection width and to enhance the overall performance of the network. In this paper, the architectural design of the topology is presented and analyzed against similar kind of 2D topologies in terms of average latency, throughput and power consumption. In order to certify the actual behavior of proposed topology, the synthetic traffic trace and five different real embedded application workloads are applied to the proposed as well as other competitor network topologies. The simulation results indicate that Cross-By-Pass-Torus is an efficient candidate among its predecessor’s and competitor topologies due to its less average latency and increased throughput at a slight cost in network power and energy for on-chip communication. [ABSTRACT FROM AUTHOR]

This paper presents the Hybrid Scalable-Minimized-Butterfly-Fat-Tree (H-SMBFT) topology for on-chip communication. Main aspects of this work are the description of the architectural design and the characteristics as well as a comparative analysis against two established indirect topologies namely Butterfly-Fat-Tree (BFT) and Scalable-Minimized-Butterfly-Fat-Tree (SMBFT). Simulation results demonstrate that the proposed topology outperforms its predecessors in terms of performance, area and power dissipation. Specifically, it improves the link interconnectivity between routing levels, such that the number of required links isreduced. This results into reduced router complexity and shortened routing paths between any pair of communicating nodes in the network. Moreover, simulation results under synthetic as well as real-world embedded applications workloads reveal that H-SMBFT can reduce the average latency by up-to35.63% and 17.36% compared to BFT and SMBFT, respectively. In addition, the power dissipation of the network can be reduced by up-to33.82% and 19.45%, while energy consumption can be improved byup-to32.91% and 16.83% compared to BFT and SMBFT, respectively. [ABSTRACT FROM AUTHOR]

Traffic state estimation from the floating car system is a challenging problem. The low penetration rate and random distribution make available floating car samples usually cover part space and time points of the road networks. To obtain a wide range of traffic state from the floating car system, many methods have been proposed to estimate the traffic state for the uncovered links. However, these methods cannot provide traffic state of the entire road networks. In this paper, the traffic state estimation is transformed to solve a missing data imputation problem, and the tensor completion framework is proposed to estimate missing traffic state. A tensor is constructed to model traffic state in which observed entries are directly derived from floating car system and unobserved traffic states are modeled as missing entries of constructed tensor. The constructed traffic state tensor can represent spatial and temporal correlations of traffic data and encode the multi-way properties of traffic state. The advantage of the proposed approach is that it can fully mine and utilize the multi-dimensional inherent correlations of traffic state. We tested the proposed approach on a well calibrated simulation network. Experimental results demonstrated that the proposed approach yield reliable traffic state estimation from very sparse floating car data, particularly when dealing with the floating car penetration rate is below 1%. [ABSTRACT FROM AUTHOR]

As a result of the greatly increased use of mobile devices, the disadvantages of portable devices have gradually begun to emerge. To solve these problems, the use of mobile cloud computing assisted by cloud data centers has been proposed. However, cloud data centers are always very far from the mobile requesters. In this paper, we propose an improved multi-objective local mobile cloud model: Compounded Local Mobile Cloud Architecture with Dynamic Priority Queues (LMCpri). This new architecture could briefly store jobs that arrive simultaneously at the cloudlet in different priority positions according to the result of auction processing, and then execute partitioning tasks on capable helpers. In the Scheduling Module, NSGA-II is employed as the scheduling algorithm to shorten processing time and decrease requester cost relative to PSO and sequential scheduling. The simulation results show that the number of iteration times that is defined to 30 is the best choice of the system. In addition, comparing with LMCque, LMCpri is able to effectively accommodate a requester who would like his job to be executed in advance and shorten execution time. Finally, we make a comparing experiment between LMCpri and cloud assisting architecture, and the results reveal that LMCpri presents a better performance advantage than cloud assisting architecture. [ABSTRACT FROM AUTHOR]

Privacy-preserving profile matching, a challenging task in mobile social networks, is getting more attention in recent years. In this paper, we propose a novel scheme that is based on ciphertext-policy attribute-based encryption to tackle this problem. In our scheme, a user can submit a preference-profile and search for users with matching-profile in decentralized mobile social networks. In this process, no participant’s profile and the submitted preference-profile is exposed. Meanwhile, a secure communication channel can be established between the pair of successfully matched users. In contrast to existing related schemes which are mainly based on the secure multi-party computation, our scheme can provide verifiability (both the initiator and any unmatched user cannot cheat each other to pretend to be matched), and requires few interactions among users. We provide thorough security analysis and performance evaluation on our scheme, and show its advantages in terms of security, efficiency and usability over state-of-the-art schemes. [ABSTRACT FROM AUTHOR]

Intelligent Transportation Systems rely on understanding, predicting and affecting the interactions between vehicles. The goal of this paper is to choose a small subset from the larger set so that the resulting regression model is simple, yet have good predictive ability for Vehicle agent speed relative to Vehicle intruder. The method of ANFIS (adaptive neuro fuzzy inference system) was applied to the data resulting from these measurements. The ANFIS process for variable selection was implemented in order to detect the predominant variables affecting the prediction of agent speed relative to intruder. This process includes several ways to discover a subset of the total set of recorded parameters, showing good predictive capability. The ANFIS network was used to perform a variable search. Then, it was used to determine how 9 parameters (Intruder Front sensors active (boolean), Intruder Rear sensors active (boolean), Agent Front sensors active (boolean), Agent Rear sensors active (boolean), RSSI signal intensity/strength (integer), Elapsed time (in seconds), Distance between Agent and Intruder (m), Angle of Agent relative to Intruder (angle between vehicles °), Altitude difference between Agent and Intruder (m)) influence prediction of agent speed relative to intruder. The results indicated that distance between Vehicle agent and Vehicle intruder (m) and angle of Vehicle agent relative to Vehicle Intruder (angle between vehicles °) is the most influential parameters to Vehicle agent speed relative to Vehicle intruder. [ABSTRACT FROM AUTHOR]

Magnetic loops are one of the most popular and used traffic sensors because of their widely extended technology and simple mode of operation. Nevertheless, very simple models have been traditionally used to simulate the effect of the passage of vehicles on these loops. In general, vehicles have been considered simple rectangular metal plates located parallel to the ground plane at a certain height close to the vehicle chassis. However, with such a simple model, it is not possible to carry out a rigorous study to assess the performance of different models of vehicles with the aim of obtaining basic parameters such as the vehicle type, its speed or its direction in traffic. For this reason and because computer simulation and analysis have emerged as a priority in intelligent transportation systems (ITS), this paper aims to present a more complex vehicle model capable of characterizing vehicles as multiple metal plates of different sizes and heights, which will provide better results in virtual simulation environments. This type of modeling will be useful when reproducing the actual behavior of systems installed on roads based on inductive loops and will also facilitate vehicle classification and the extraction of basic traffic parameters. [ABSTRACT FROM AUTHOR]

We investigate the use of Twitter data to deliver signals for syndromic surveillance in order to assess its ability to augment existing syndromic surveillance efforts and give a better understanding of symptomatic people who do not seek healthcare advice directly. We focus on a specific syndrome—asthma/difficulty breathing. We outline data collection using the Twitter streaming API as well as analysis and pre-processing of the collected data. Even with keyword-based data collection, many of the tweets collected are not be relevant because they represent chatter, or talk of awareness instead of an individual suffering a particular condition. In light of this, we set out to identify relevant tweets to collect a strong and reliable signal. For this, we investigate text classification techniques, and in particular we focus on semi-supervised classification techniques since they enable us to use more of the Twitter data collected while only doing very minimal labelling. In this paper, we propose a semi-supervised approach to symptomatic tweet classification and relevance filtering. We also propose alternative techniques to popular deep learning approaches. Additionally, we highlight the use of emojis and other special features capturing the tweet’s tone to improve the classification performance. Our results show that negative emojis and those that denote laughter provide the best classification performance in conjunction with a simple word-level n-gram approach. We obtain good performance in classifying symptomatic tweets with both supervised and semi-supervised algorithms and found that the proposed semi-supervised algorithms preserve more of the relevant tweets and may be advantageous in the context of a weak signal. Finally, we found some correlation (r = 0.414, p = 0.0004) between the Twitter signal generated with the semi-supervised system and data from consultations for related health conditions. [ABSTRACT FROM AUTHOR]

DIBR-3D technology has evolved over the past few years with the demands of consumers increasing in recent times for future free-view 3D videos on their home televisions. The main issue in 3D technology is the lack of 3D content available to watch using the traditional TV systems. Although, some sophisticated devices like stereoscopic cameras have been used to fill the gap between the 3D content demand and 3D content supply. But the content generated through these sophisticated devices can not be displayed on the traditional TV systems, so there needs to be some mechanism which is inline with the traditional TV. Furthermore, the huge collection of existing 2D content should be converted to 3D using depth image-based rendering techniques. This conversion technique can highly contribute in overcoming the shortage problem of the 3D content. This paper presents a novel approach for converting 2D degraded image for DIBR 3D-TV view. This degraded or noisy/blur image is enhanced through image dehazing and Directional Filter Bank (DFB). This enhancement is necessary because of the occlusion effect or hole filling problem that occurs due to imperfect depth map. The enhanced image is then segmented into the foreground image and the background image. After the segmentation, the depth map is generated using image profiles. Moreover, Stereoscopic images are finally produced using the DIBR procedure which is based on the 2D input image and the corresponding depth map. We have verified the results of the proposed approach by comparing the results with the existing state-of-the-art techniques. [ABSTRACT FROM AUTHOR]

Digital public displays installed in various locations provide valuable information for the passers-by. However, the static characteristic of the digital public display limits the consumption of the displayed content to a small area. Personal mobile devices such as smartphones are now capable of interacting with digital public displays, which enables the passers-by to “take-away” the content and consume it on-the-go. This process requires device binding, content selection, and transfer between the two devices. In this paper, we propose a device binding method which utilizes the content brightness changing pattern as a unique content ID on the public display and an illuminance sensor on the mobile to bind and transfer between two devices. We conducted performance evaluations for binding algorithm robustness in different conditions. Also comparative studies among other binding interaction methods were conducted. Our results show that our proposed method performed stably across the various conditions and overall performance in interaction completion time and error rate was similar or superior to the existing methods. [ABSTRACT FROM AUTHOR]

Ex-ante online risk assessment for building emergency evacuation is essential to protect human life and property. Current risk assessment methods are limited by the tradeoff between accuracy and efficiency. In this paper, we propose an online method that overcomes this tradeoff based on multimedia data (e.g. videos data from surveillance cameras) and deep learning. The method consists of two parts. The first estimates the evacuee position as input for training the assessment model to then perform risk assessment in real scenarios. The second considers a social force model based on the evacuation simulation for the output of training model. We verify the proposed method in simulation and real scenarios. Model sensitivity analyses and large-scale tests demonstrate the usability and superiority of the proposed method. By the method, the computation time of risk assessment could be decreased from 10 minutes (by traditional simulation method) to 2.18 s. [ABSTRACT FROM AUTHOR]

A new Interpolation based Reversible Data Hiding (IRDH) scheme is reported in this paper. For different applications of an IRDH scheme to the digital image, video, multimedia, big-data and biological data, the embedding capacity requirement usually varies. Disregarding this important consideration, existing IRDH schemes do not offer a better embedding rate-distortion performance for varying size payloads. To attain this varying capacity requirement with our proposed adaptive embedding, we formulate a capacity control parameter and propose to utilize it to determine a minimum set of embeddable bits in a pixel. Additionally, we use a logical (or bit-wise) correlation between the embeddable pixel and estimated versions of an embedded pixel. Thereby, while a higher range between an upper and lower limit of the embedding capacity is maintained, a given capacity requirement within that limit is also attained with a better-embedded image quality. Computational modeling of all new processes of the scheme is presented, and performance of the scheme is evaluated with a set of popular test-images. Experimental results of our proposed scheme compared to the prominent IRDH schemes have recorded a significantly better-embedding rate-distortion performance. [ABSTRACT FROM AUTHOR]

In general, the stock prices of the same industry have a similar trend, but those of different industries do not. When investing in stocks of different industries, one should select the optimal model from lots of trading models for each industry because any model may not be suitable for capturing the stock trends of all industries. However, the study has not been carried out at present. In this paper, firstly we select 424 S&P 500 index component stocks (SPICS) and 185 CSI 300 index component stocks (CSICS) as the research objects from 2010 to 2017, divide them into 9 industries such as finance and energy respectively. Secondly, we apply 12 widely used machine learning algorithms to generate stock trading signals in different industries and execute the back-testing based on the trading signals. Thirdly, we use a non-parametric statistical test to evaluate whether there are significant differences among the trading performance evaluation indicators (PEI) of different models in the same industry. Finally, we propose a series of rules to select the optimal models for stock investment of every industry. The analytical results on SPICS and CSICS show that we can find the optimal trading models for each industry based on the statistical tests and the rules. Most importantly, the PEI of the best algorithms can be significantly better than that of the benchmark index and “Buy and Hold” strategy. Therefore, the algorithms can be used for making profits from industry stock trading. [ABSTRACT FROM AUTHOR]

In this paper, a novel unequal error protection (UEP) technique is proposed for video streaming over multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) systems. Based on the concept of hierarchical quadrature amplitude modulation (HQAM) UEP and multi-antenna UEP, the proposed technique combines the relative protection levels (PLs) of constellation symbols and the differentiated PLs of the transmit antennas. In the proposed technique, standard square quadrature amplitude modulation (QAM) constellations are used instead of HQAM so that the QAM mapper at the transmitter side and the soft decision calculation at the receiver side remain unchanged, but the UEP benefit of HQAM is retained. The superior performance of the proposed technique is explained by the improved connections between data with various priorities and data paths with various PLs. The assumed video compression method is H.264/AVC, which is known to be commercially successful. The IEEE802.16m system is adopted as a data transmission system. With the aid of realistic simulations in strict accordance with the standards of IEEE802.16m systems and H.264/AVC video compression systems, the proposed technique HQAM-multi-antenna UEP is shown to improve the video quality significantly for a given average bit error rate when compared with previous techniques. [ABSTRACT FROM AUTHOR]

Certificateless aggregate signature (CLAS) is a crucial cryptosystem. It can not only compress multiple signatures into a short signature, but also ensure the validity of each signature participating in the aggregation by verifying the validity of an resulting aggregate signature. Therefore, a secure and efficient CLAS scheme is very useful for resource-constrained environments because it greatly reduces the overall length of the signature and the verifier’s computational overhead. Cheng et al. presented an efficient CLAS scheme and proved its security in the random oracle model. However, we find that their scheme has security flaws. In this paper, we demonstrate that Cheng et al.’s CLAS scheme is vulnerable to coalition attacks from internal signers. To overcome these attacks, we present an improved CLAS scheme and prove that it is existentially unforgeable under the computational Diffie-Hellman assumption. In addition, our CLAS scheme can not only resist coalition attacks but also generate a very short aggregate signature. The performance analysis results show that our improved CLAS scheme is lower than the related CLAS schemes in terms of communication overhead and computation cost. [ABSTRACT FROM AUTHOR]

The objective of this study is to establish a framework for analyzing infrastructure dynamics affecting the long-term steady state, and hence resilience in civil infrastructure systems. To this end, a multi-agent simulation model was created to capture important phenomena affecting the dynamics of coupled human-infrastructure systems and model the long-term performance regimes of infrastructure. The proposed framework captures the following three factors that shape the dynamics of coupled human-infrastructure systems: (i) engineered physical infrastructure; (ii) human actors; and (iii) chronic and acute stressors. A complex system approach was adopted to examine the long-term resilience of infrastructure based on the understanding of performance regimes, as well as tipping points at which shifts in the performance regime of infrastructure occur under the impact of external stressors and/or change in internal dynamics. The application of the proposed framework is demonstrated in a case of urban water distribution infrastructure using the data from a numerical case study network. The developed multi-agent simulation model was then used in examining the system resilience over a 100-year horizon under stressors such as population change and funding constraints. The results identified the effects of internal dynamics and external stressors on the resilience landscape of infrastructure systems. Furthermore, the results also showed the capability of the framework in capturing and simulating the underlying mechanisms affecting human-infrastructure dynamics, as well as long-term regime shifts and tipping point behaviors. Therefore, the integrated framework proposed in this paper enables building complex system-based theories for a more advanced understanding of civil infrastructure resilience. [ABSTRACT FROM AUTHOR]

Wireless Mesh Networks (WMNs) integrate the advantages of WLANs and mobile Ad Hoc networks, which have become the key techniques of next-generation wireless networks in the context of emergency recovery. Wireless Mesh Networks (WMNs) are multi-hop wireless networks with instant deployment, self-healing, self-organization and self-configuration features. These capabilities make WMNs a promising technology for incident and emergency communication. An incident area network (IAN) needs a reliable and lively routing path during disaster recovery and emergency response operations when infrastructure-based communications and power resources have been destroyed and no routes are available. Power aware routing plays a significant role in WMNs, in order to provide continuous efficient emergency services. The existing power aware routing algorithms used in wireless networks cannot fully fit the characteristics of WMNs, to be used for emergency recovery. This paper proposes a power aware routing algorithm (PARA) for WMNs, which selects optimal paths to send packets, mainly based on the power level of next node along the path. This algorithm was implemented and tested in a proven simulator. The analytic results show that the proposed power node-type aware routing algorithm metric can clearly improve the network performance by reducing the network overheads and maintaining a high delivery ratio with low latency. [ABSTRACT FROM AUTHOR]

To predict what products customers will buy in next transaction is an important task. Existing work in next-basket prediction can be summarized into two paradigms. One is the item-centric paradigm, where sequential patterns are mined from customers’ transactional data and leveraged for prediction. However, these approaches usually suffer from the data sparseness problem. The other is the user-centric paradigm, where collaborative filtering techniques have been applied on customers’ historical data. However, these methods ignore the sequential behaviors of customers which is often crucial for next-basket prediction. In this paper, we introduce a hybrid method, namely the Co-Factorization model over Sequential and Historical purchase data (CFSH for short) for next-basket recommendation. Compared with existing methods, our approach conveys the following merits: 1) By mining global sequential patterns, we can avoid the sparseness problem in traditional item-centric methods; 2) By factorizing product-product and customer-product matrices simultaneously, we can fully exploit both sequential and historical behaviors to learn customer and product representations better; 3) By using a hybrid recommendation method, we can achieve better performance in next-basket prediction. Experimental results on three real-world purchase datasets demonstrated the effectiveness of our approach as compared with the state-of-the-art methods. [ABSTRACT FROM AUTHOR]

This paper describes an approach for improving the accuracy of memory-based collaborative filtering, based on the technique for order of preference by similarity to ideal solution (TOPSIS) method. Recommender systems are used to filter the huge amount of data available online based on user-defined preferences. Collaborative filtering (CF) is a commonly used recommendation approach that generates recommendations based on correlations among user preferences. Although several enhancements have increased the accuracy of memory-based CF through the development of improved similarity measures for finding successful neighbors, there has been less investigation into prediction score methods, in which rating/preference scores are assigned to items that have not yet been selected by a user. A TOPSIS solution for evaluating multiple alternatives based on more than one criterion is proposed as an alternative to prediction score methods for evaluating and ranking items based on the results from similar users. The recommendation accuracy of the proposed TOPSIS technique is evaluated by applying it to various common CF baseline methods, which are then used to analyze the MovieLens 100K and 1M benchmark datasets. The results show that CF based on the TOPSIS method is more accurate than baseline CF methods across a number of common evaluation metrics. [ABSTRACT FROM AUTHOR]

Minimization functionals related to Euler’s elastica energy has a broad range of applications in computer vision and image processing. This paper proposes a novel Euler’s elastica and curvature-based variational model for image restoration corrupted with multiplicative noise. It combines Euler’s elastica curvature with a Weberized total variation (TV) regularization and gets a novel Euler’s elastica energy and TV-based minimization functional. The combined approach in this variational model can preserve edges while reducing the blocky effect in smooth regions. The implicit gradient descent scheme is applied to efficiently finding the minimizer of the proposed functional. Experimental results demonstrate the effectiveness of the proposed model in visual improvement, as well as an increase in the peak signal-to-noise ratio, compared to the PDE-based methods. [ABSTRACT FROM AUTHOR]

Sparse spectral clustering (SSC) has become one of the most popular clustering approaches in recent years. However, its high computational complexity prevents its application to large-scale datasets such as hyperspectral images (HSIs). In this paper, we propose two efficient approximate sparse spectral clustering methods for HSIs clustering in which clustering performance is improved by utilizing local information among the data. Firstly, we construct a smaller representative dataset on which sparse spectral clustering is performed. Then the labels of ground object are extending to whole dataset based on the local information according to two extending strategies. The first one is that the local interpolation is utilized to improve the extension of the clustering result. The other one is that the label extension is turned to a problem of subspace embedding, and is fulfilled by locally linear embedding (LLE). Several experiments on HSIs demonstrated that the proposed algorithms are effective for HSIs clustering. [ABSTRACT FROM AUTHOR]

For railway operators, one of many important goals is to improve the utilization efficiency of electric multiple units (EMUs). When operators design EMU circulation plans, EMU type restrictions are critical factors when assigning EMUs to the correct depots for maintenance. However, existing studies only consider that EMUs are maintained at their home depots. However, targeting that problem, in this paper, an optimization model for the EMU circulation planning problem that allows depots to be selected for EMU maintenance is proposed. This model aims at optimizing the number of used EMUs and the number of EMU maintenance tasks and simultaneously incorporates other important constraints, including type restrictions, on EMU maintenance and night accommodation capacity at depots. In order to solve the model, a branch-and-price algorithm is also developed. A case study of a real-world high-speed railway was conducted to compare and analyze the effects of different maintenance location constraints. The results show that the number of EMUs used will decrease under the maintenance sharing scheme, the number of EMU maintenance tasks can be reduced, and the time occupied in EMU maintenance will be released. In addition, the scheme of maintenance resources sharing and increases to mileage limits can effectively decrease the number of EMU maintenance tasks significantly. The model and algorithm can be used as an effective quantitative analysis tool for railway operators' decision-making processes in the EMU circulation planning problem. [ABSTRACT FROM AUTHOR]

Recently, sparse representation, which relies on the underlying assumption that samples can be sparsely represented by their labeled neighbors, has been applied with great success to image classification problems. Through sparse representation-based classification (SRC), the label can be assigned with minimum residual between the sample and its synthetic version with class-specific coding, which means that the coding scheme is the most significant factor for classification accuracy. However, conventional SRC-based coding schemes ignore dependency among the samples, which leads to an undesired result that similar samples may be coded into different categories due to quantization sensitivity. To address this problem, in this paper, a novel approach based on self-supervised sparse representation is proposed for image classification. In the proposed approach, the manifold structure of samples is firstly exploited with low rank representation. Next, the low-rank representation matrix is used to characterize the similarity of samples in order to establish a self-supervised sparse coding model, which aims to preserve the local structure of codings for similar samples. Finally, a numerical algorithm utilizing the alternating direction method of multipliers (ADMM) is developed to obtain the approximate solution. Experiments on several publicly available datasets validate the effectiveness and efficiency of our proposed approach compared with existing state-of-the-art methods. [ABSTRACT FROM AUTHOR]

In this paper, we propose a sentiment-based approach to investigate the temporal and spatiotemporal effects on tourists’ emotions when visiting a city’s tourist destinations. Our approach consists of four steps: data collection and preprocessing from social media; visitor origin identification; visit sentiment identification; and temporal and spatiotemporal analysis. The temporal and spatiotemporal dimensions include day of the year, season of the year, day of the week, location sentiment progression, enjoyment measure, and multi-location sentiment progression. We apply this approach to the city of Chicago using over eight million tweets. Results show that seasonal weather, as well as special days and activities like concerts, impact tourists’ emotions. In addition, our analysis suggests that tourists experience greater levels of enjoyment in places such as observatories rather than zoos. Finally, we find that local and international visitors tend to convey negative sentiment when visiting more than one attraction in a day whereas the opposite holds for out of state visitors. [ABSTRACT FROM AUTHOR]

Recent research on speech segregation and music fingerprinting has led to improvements in speech segregation and music identification algorithms. Speech and music segregation generally involves the identification of music followed by speech segregation. However, music segregation becomes a challenging task in the presence of noise. This paper proposes a novel method of speech segregation for unlabelled stationary noisy audio signals using the deep belief network (DBN) model. The proposed method successfully segregates a music signal from noisy audio streams. A recurrent neural network (RNN)-based hidden layer segregation model is applied to remove stationary noise. Dictionary-based fisher algorithms are employed for speech classification. The proposed method is tested on three datasets (TIMIT, MIR-1K, and MusicBrainz), and the results indicate the robustness of proposed method for speech segregation. The qualitative and quantitative analysis carried out on three datasets demonstrate the efficiency of the proposed method compared to the state-of-the-art speech segregation and classification-based methods. [ABSTRACT FROM AUTHOR]

The path choice behavior of battery electric vehicle (BEV) drivers is influenced by the lack of public charging stations, limited battery capacity, range anxiety and long battery charging time. This paper investigates the congestion/flow pattern captured by stochastic user equilibrium (SUE) traffic assignment problem in transportation networks with BEVs, where the BEV paths are restricted by their battery capacities. The BEV energy consumption is assumed to be a linear function of path length and path travel time, which addresses both path distance limit problem and road congestion effect. A mathematical programming model is proposed for the path-based SUE traffic assignment where the path cost is the sum of the corresponding link costs and a path specific out-of-energy penalty. We then apply the convergent Lagrangian dual method to transform the original problem into a concave maximization problem and develop a customized gradient projection algorithm to solve it. A column generation procedure is incorporated to generate the path set. Finally, two numerical examples are presented to demonstrate the applicability of the proposed model and the solution algorithm. [ABSTRACT FROM AUTHOR]

Music genre classification is a challenging research concept, for which open questions remain regarding classification approach, music piece representation, distances between/within genres, and so on. In this paper an investigation on the classification of generated music pieces is performed, based on the idea that grouping close related known pieces in different sets –or clusters– and then generating in an automatic way a new song which is somehow “inspired” in each set, the new song would be more likely to be classified as belonging to the set which inspired it, based on the same distance used to separate the clusters. Different music pieces representations and distances among pieces are used; obtained results are promising, and indicate the appropriateness of the used approach even in a such a subjective area as music genre classification is. [ABSTRACT FROM AUTHOR]

In this paper, we propose a face recognition algorithm based on a combination of vector quantization (VQ) and Markov stationary features (MSF). The VQ algorithm has been shown to be an effective method for generating features; it extracts a codevector histogram as a facial feature representation for face recognition. Still, the VQ histogram features are unable to convey spatial structural information, which to some extent limits their usefulness in discrimination. To alleviate this limitation of VQ histograms, we utilize Markov stationary features (MSF) to extend the VQ histogram-based features so as to add spatial structural information. We demonstrate the effectiveness of our proposed algorithm by achieving recognition results superior to those of several state-of-the-art methods on publicly available face databases. [ABSTRACT FROM AUTHOR]

In this paper, we propose a new automatic hyperparameter selection approach for determining the optimal network configuration (network structure and hyperparameters) for deep neural networks using particle swarm optimization (PSO) in combination with a steepest gradient descent algorithm. In the proposed approach, network configurations were coded as a set of real-number m-dimensional vectors as the individuals of the PSO algorithm in the search procedure. During the search procedure, the PSO algorithm is employed to search for optimal network configurations via the particles moving in a finite search space, and the steepest gradient descent algorithm is used to train the DNN classifier with a few training epochs (to find a local optimal solution) during the population evaluation of PSO. After the optimization scheme, the steepest gradient descent algorithm is performed with more epochs and the final solutions (pbest and gbest) of the PSO algorithm to train a final ensemble model and individual DNN classifiers, respectively. The local search ability of the steepest gradient descent algorithm and the global search capabilities of the PSO algorithm are exploited to determine an optimal solution that is close to the global optimum. We constructed several experiments on hand-written characters and biological activity prediction datasets to show that the DNN classifiers trained by the network configurations expressed by the final solutions of the PSO algorithm, employed to construct an ensemble model and individual classifier, outperform the random approach in terms of the generalization performance. Therefore, the proposed approach can be regarded an alternative tool for automatic network structure and parameter selection for deep neural networks. [ABSTRACT FROM AUTHOR]

An improved hierarchical fuzzy inference method based on C-measure map-matching algorithm is proposed in this paper, in which the C-measure represents the certainty or probability of the vehicle traveling on the actual road. A strategy is firstly introduced to use historical positioning information to employ curve-curve matching between vehicle trajectories and shapes of candidate roads. It improves matching performance by overcoming the disadvantage of traditional map-matching algorithm only considering current information. An average historical distance is used to measure similarity between vehicle trajectories and road shape. The input of system includes three variables: distance between position point and candidate roads, angle between driving heading and road direction, and average distance. As the number of fuzzy rules will increase exponentially when adding average distance as a variable, a hierarchical fuzzy inference system is then applied to reduce fuzzy rules and improve the calculation efficiency. Additionally, a learning process is updated to support the algorithm. Finally, a case study contains four different routes in Beijing city is used to validate the effectiveness and superiority of the proposed method. [ABSTRACT FROM AUTHOR]

Broken water pumps continue to impede efforts to deliver clean and economically-viable water to the global poor. The literature has demonstrated that customers’ health benefits and willingness to pay for clean water are best realized when clean water infrastructure performs extremely well (>99% uptime). In this paper, we used sensor data from 42 Afridev-brand handpumps observed for 14 months in western Kenya to demonstrate how sensors and supervised ensemble machine learning could be used to increase total fleet uptime from a best-practices baseline of about 70% to >99%. We accomplish this increase in uptime by forecasting pump failures and identifying existing failures very quickly. Comparing the costs of operating the pump per functional year over a lifetime of 10 years, we estimate that implementing this algorithm would save 7% on the levelized cost of water relative to a sensor-less scheduled maintenance program. Combined with a rigorous system for dispatching maintenance personnel, implementing this algorithm in a real-world program could significantly improve health outcomes and customers’ willingness to pay for water services. [ABSTRACT FROM AUTHOR]

Aiming at the dense urban road network vulnerability without structural negative consequences, this paper proposes a novel non-structural road network vulnerability analysis framework. Three aspects of the framework are mainly described: (i) the rationality of non-structural road network vulnerability, (ii) the metrics for negative consequences accounting for variant road conditions, and (iii) the introduction of a new vulnerability index based on user exposure. Based on the proposed methodology, a case study in the Sioux Falls network which was usually threatened by regular heavy snow during wintertime is detailedly discussed. The vulnerability ranking of links of Sioux Falls network with respect to heavy snow scenario is identified. As a result of non-structural consequences accompanied by conceivable degeneration of network, there are significant increases in generalized travel time costs which are measurements for “emotionally hurt” of topological road network. [ABSTRACT FROM AUTHOR]

With the continuing growth of multi-media learning resources, it is important to offer methods helping learners to explore and acquire relevant learning information effectively. As services that organize multi-media learning materials together to support programming learning, the digital case-based learning system is needed. In order to create a case-oriented e-learning system, this paper concentrates on the digital case study of multi-media resources and learning processes with an integrated framework. An integration of multi-media resources, testing and learning strategies recommendation as the learning unit is proposed in the digital case-based learning framework. The learning mechanism of learning guidance, multi-media materials learning and testing feedback is supported in our project. An improved personalized genetic algorithm which incorporates preference information and usage degree into the crossover and mutation process is proposed to assemble the personalized test sheet for each learner. A learning strategies recommendation solution is proposed to recommend learning strategies for learners to help them to learn. The experiments are conducted to prove that the proposed approaches are capable of constructing personalized sheets and the effectiveness of the framework. [ABSTRACT FROM AUTHOR]

Automatic extraction of protein-protein interaction (PPI) pairs from biomedical literature is a widely examined task in biological information extraction. Currently, many kernel based approaches such as linear kernel, tree kernel, graph kernel and combination of multiple kernels has achieved promising results in PPI task. However, most of these kernel methods fail to capture the semantic relation information between two entities. In this paper, we present a special type of tree kernel for PPI extraction which exploits both syntactic (structural) and semantic vectors information known as Distributed Smoothed Tree kernel (DSTK). DSTK comprises of distributed trees with syntactic information along with distributional semantic vectors representing semantic information of the sentences or phrases. To generate robust machine learning model composition of feature based kernel and DSTK were combined using ensemble support vector machine (SVM). Five different corpora (AIMed, BioInfer, HPRD50, IEPA, and LLL) were used for evaluating the performance of our system. Experimental results show that our system achieves better f-score with five different corpora compared to other state-of-the-art systems. [ABSTRACT FROM AUTHOR]