Search

The subject of the article is proposed proprietary M toxicity indicator, which is based on the assumption that CO2 emissions are a measure of the correctness of the combustion process. For this purpose, gaseous exhaust compounds such as hydrocarbons, nitrogen oxides, carbon monoxide and carbon dioxide were measured and analyzed. The test object was a motorcycle, equipped with an gasoline engine with a displacement of 0.7 dm3 and a maximum power of 55 kW. The tests were carried out using the PEMS (Portable Emissions Measurement System) AxionR/S+. The exhaust emissions measurement was done in line with the WMTC (World Motorcycles Test Cycle) certification test, dedicated to vehicles in this category. The test consists of three parts, each of them lasts 600 seconds and has a different maximum speed value. The test was performed on a single-roller chassis dynamometer, designed for testing two-wheeled vehicles. The toxicity indicators and rotation speed results were presented as a function of time.

Road transport holds for the largest share in the freight transport sector in Europe. This work is carried out by heavy vehicles of various types. It is assumed that, in principle, transport should take place on the main road connections, such as motorways or national roads. Their share in the polish road infrastructure is not dominant. Rural and communal roads roads are the most prevalent. This fact formed the basis of the exhaust emissions and fuel consumption tests of heavy vehicles in real operating conditions. A set of vehicles (truck tractor with a semi-trailer) meeting the Euro V emission norm, transporting a load of 24,800 kg, was selected for the tests. The research was carried out on an non-urban route, the test route length was 22 km. A mobile Semtech DS instrument was used, which was used to measure the exhaust emissions. Based on the obtained results, the emission characteristics were determined in relation to the operating parameters of the vehicles drive system. Road emission, specific emission and fuel consumption values were also calculated.

The article presents selected problems concerning tests of toxic exhaust emissions from engines of vehicles, mobile devices, engines used in gardening and construction works. For this group of engines, this type of testing is carried out primarily in laboratory conditions, however, variable load conditions during actual operation justify efforts to determine the level of emissions in real operating conditions. Research in real operating conditions for different engine categories becomes increasingly more standard, in this aspect, it is necessary to verify the state of knowledge and methodology in the aspect of testing engines of machines and mobile devices. The research performed by the authors was the first of this type using PEMS equipment, hence some conclusions and observations can be made from the obtained results. At present, the type approval procedures for the engine group in question do not account for emissions tests in real operating conditions, while also missing any description of a standardized research methodology. In addition, the engine group in question is not really suitable for testing in real conditions. An introduction to research aimed at developing an exhaust emission test methodology in real operating conditions of mobile device engines was included in the article.

The subject of this article is a comparative analysis of exhaust emissions for: HC (hydrocarbons), CO (carbon monoxide), CO2 (car-bon dioxide), NOx (nitrogen oxides) from a passenger vehicle and a motorcycle in laboratory conditions on a dynamometer station. The first vehicle category was represented by a compression-ignition engine with a displacement volume of 1.3 dm3 and a power of 66 kW. The exhaust aftertreatment system included a catalytic converter and a particulate filter. The second category was a motorcycle, equipped with an engine with a displacement of 0.7 dm3 and a maximum power of 55 kW. The two-wheeled vehicle was equipped with a three-way catalytic converter. Speeds were modeled on the European type approval test – NEDC (New European Driving Cycle). In order to conduct a comparative analysis of exhaust emissions and fuel consumption from vehicles of different categories, the obtained results were presented in the form of emissions converted into passenger-kilometers (g/pkm). The research used modern equipment belonging to the PEMS (Portable Emissions Measurement Systems) group of devices. The analyzes carried out enable the decision mak-ing on which vehicles have a greater environmental impact due to their exhaust emissions, taking into account the distance and the number of passengers carried.

The subject of this article is the identification of engine exhaust emissions of two-wheel vehicles under laboratory conditions. For this purpose, analysis of road and time emission of gaseous compounds: HC, CO, CO2, NOx from a motorcycle equipped with an engine with a displacement volume of 0.7 dm3 and a maximum power of 55 kW was made. The tests were performed on a dynamometer station designed for testing two-wheel vehicles. The speed characteristic was taken from the European type approval test WMTC, consisting of three parts. Each of these parts lasted 600 seconds and was characterized by a different maximum vehicle speed value. The mobile AXION R/S apparatus part of the PEMS device group was used in the research. What is more, the exhaust emissions results were referred to the values listed by the exhaust emission standard met by the tested vehicle (Euro 4 standard). Laboratory tests presented in the article are only intended as a basis for further research, which includes exhaust emission tests from two-wheel vehicles in real operating conditions.

At the beginning of the twenty-first century, one of the major challenges of humanity was to reduce the negative effects of civilization development. Besides the engines used in road vehicles there is a large group of engines for non-road applications. This group includes motor propelled vehicles not used on the road NRMM (Non-Road Mobile Machinery). Engines of these vehicles, among all of the non-road applications, are characterized by very specific working conditions that do not allow for them to be qualified for propulsion engines. The main problem with these vehicles is the particulate matter and nitrogen oxides emission. Rail vehicles operating conditions these requirements take by the similar way, as having a wide range of rolling stock markedly alters the environmental impact of these vehicles. Thus it becomes necessary to consider the issue of the method of evaluation of engine emissions in rail vehicles in terms of their actual operating conditions. Thus, efforts to assess the actual level of emissivity for rail vehicles and attempts to improve it are necessary and justified.