Search

This paper presents the successful preparation of porous membranes based on chitosan with enhanced mechanical, thermal and chemical properties applicable in water treatment field. Herein, chitosan/kaolin composite membranes with a cross-linking agent and a porogen were prepared using the solvent casting method. The characterization of the as-fabricated membranes indicated that the combined effect of kaolin as reinforcing agent, polyethylene glycol as pore former and citric acid as cross-linker in a chitosan matrix showed a significant influence on the membrane properties. The results indicated that the incorporation of a hydrophilic porogenic reagent into the collodion in addition to providing a porous morphology makes it possible to obtain a more hydrophilic membrane, and thus induces an increase in the pure water permeability. The cross-linked membranes exhibited an improved water resistance, better thermal and mechanical properties as compared to neat chitosan films. The cross-linked membranes had a mean pore size of 50 nm falling in the range of ultrafiltration. Their functional properties were determined in terms of pure water filtration and molecular weight cut-off tests. [ABSTRACT FROM AUTHOR]

The focus of this work is to assess the quality of porous membranes prepared from naturally occurring kaolin clays and to evaluate the performance of tubular ceramic membranes treating integrated raw effluents from seafood industry. This material has been chosen due to its natural abundance, its non-toxicity, low cost and its valuable properties. The preparation and characterization of porous tubular ceramic membranes, using kaolin powder with and without corn starch as poreforming agent, were reported. SEM photographs indicated that the membrane surface was homogeneous. The effects of material compositions, additives and the relatively lower sintering temperature, ranging from 1100° to 1250°C, on porosity, average pore size, pore-size distribution and mechanical strength of membranes have been investigated. A correlation between microstructure and mechanical properties of membranes has been discussed. The performance of the novel ceramic membranes thus obtained was determined by evaluating both the water permeability and rejection. The obtained membrane was used to treat cuttlefish effluents generated from the conditioning seawater product industry which consumes a great amount of water. Cross-flow microfiltration was performed then, in order to reduce the turbidity and chemical oxygen demand (COD). [ABSTRACT FROM AUTHOR]