Search

Accelerator-based techniques with electromagnetic mass separation are considered among the most innovative and promising strategies to produce non-conventional radionuclides for nuclear medicine. Such approach was successfully used at CERN, where the dedicated MEDICIS facility was built, and at TRIUMF, where the ISAC radioactive beam facility was used to produce unconventional α-emitters. In such framework, the Legnaro National Laboratories of the Italian Institute of Nuclear Physics (INFN-LNL) proposed the ISOLPHARM project (ISOL technique for radioPHARMaceuticals), which will exploit radionuclides producible with the SPES (Selective Production of Exotic Species) ISOL (Isotope Separation On-Line) facility to develop novel radiopharmaceuticals. The ISOL technique utilizes the irradiation with a primary beam of particles/nuclei of a production target where radionuclides are produced. A radioactive ion beam is subsequently extracted from the production target unit, and transported up to an analyzing magnet, where non-isobaric contaminants are filtered out. The so-obtained purified radioactive beam is dumped onto an implantation substrate, referred as collection target. Then, the desired nuclides can be chemically harvested from the collected isobars, and the isotopically pure atom collection can be employed to radiolabel high specific activity radiopharmaceuticals. Metallic deposition targets in the form of coated metal foils were mostly used at TRIUMF and CERN. At ISOLPHARM, a different approach is under investigation which foresees the use of soluble cold-pressed collection targets, possibly facilitating the chemical purification process of the collected radionuclides. In this study, the production and characterization of some of the ISOLPHARM collection targets is presented, in particular, soluble salts (NaCl and NaNO3) and organic materials widely used for pharmaceutical tablets production are considered. All such materials proved to be potentially suitable as collection targets, since solid samples were easily produced and resulted compatible with the vacuum conditions required for the ion implantation process. Furthermore, some of the selected substrates were used for proof-of-concept deposition tests with stable silver, to prove their suitability as ISOLPHARM deposition substrates for silver-111, a promising candidate for radiotherapy. Such tests highlighted possible scenarios useful for the development of new alternative materials, as the use of insoluble organic targets., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

Research in the field of radiopharmaceuticals is increasingly promoted by the widespread and growing interest in applying nuclear medicine procedures in both disease diagnosis and treatment. The production of radionuclides of medical interest is however a challenging issue. Along with the conventional techniques other innovative approaches are being investigated and, among those, the ISOLPHARM project is being developed at INFN-LNL (Istituto Nazionale di Fisica Nucleare - Laboratori Nazionali di Legnaro). Such technique foresees the employment of the SPES ISOL facility to produce isobarically pure Radioactive Ion Beams (RIBs), obtained thanks to electromagnetic mass separation and collected on appropriate substrates. The latter are successively recovered and dissolved, allowing thus the chemical separation and harvesting of the nuclides of interest, free from any isotopic contaminant. Although ISOLPHARM can be potentially employed for most of the routinely used medical radioisotopes, its innovation potential is better expressed considering its capability to provide carrier free unconventional nuclides, difficult to produce with state-of-art techniques, such as 111 Ag, a β - emitter potentially interesting for therapeutic applications. Thus, in the framework of ISOLPHARM, INFN supported a two-years experiment, called ISOLPHARM_Ag, aimed at evaluating the feasibility of the production of a 111 Ag labelled radiopharmaceutical. The ISOL production yields are estimated by computing intensive Monte Carlo codes, that require an appropriate custom Information Technology infrastructure. The presented work is focused on the first part of the production chain including the capability to extract, ionize, and collect stable Ag beams with SPES technologies. MC calculations were used to estimate the expected 111 Ag in-target yields, whereas experiments with stable Ag were performed to test the ionization, transport and collection of Ag beams., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Radiopharmaceuticals represent a fundamental tool for nuclear medicine procedures, both for diagnostic and therapeutic purposes. The present work aims to explore the Isotope Separation On-Line (ISOL) technique for the production of carrier-free radionuclides for nuclear medicine at SPES, a nuclear physics facility under construction at INFN-LNL. Stable ion beams of strontium, yttrium and iodine were produced using the SPES test bench (Front-End) to simulate the production of 89 Sr, 90 Y, 125 I and 131 I and collected with good efficiency on suitable targets., (Copyright © 2017 Elsevier Ltd. All rights reserved.)