Search

A rapid, simple, selective, economical, and sensitive dispersive liquid-liquid microextraction methodology has been established for the preconcentration of copper (Cu) at trace levels. The Cu(II) was complexed with 1-(2-pyridylazo)-2-naphthol; ethanol and carbon tetrachloride were used as disperser and extraction solvents, respectively. To obtain quantitative recovery of Cu(II), the effects of parameters influencing its extraction efficiency and subsequent determinations, i.e., pH, amount of complexing reagent, extraction time, and type and volume of disperser and extraction solvents, were examined. LOD and LOQ were 0.06 and 0.20 microg/L, respectively. The enrichment factor of the proposed method was 60, and the RSD <5%. TMDA 51.3 and TMDA 70 fortified water certified reference materials were analyzed for validation of the procedure. The developed microextraction procedure has been used for the preconcentration of Cu(II) in water samples with acceptable results.

A simple and rapid cloud point extraction (CPE) procedure was applied for preconcentration of trace quantities of arsenic (As) in scalp hair samples. The samples were subjected to microwave-assisted digestion in a mixture of nitric acid and hydrogen peroxide (2 + 1, v/v) prior to preconcentration by CPE. The As in digested samples was complexed with ammonium pyrrolidine dithiocarbamate (APDC), and the resultant As-PDC complex was extracted by a nonionic surfactant, octylphenoxypolyethoxyethanol (Triton X-114). After centrifugation, the surfactant-rich phase was diluted with 0.1 M HNO3 in methanol and analyzed by electrothermal atomic absorption spectrometry. The experimental parameters, i.e., amount of APDC, concentration of Triton X-114, equilibrium temperature and time, were optimized. For validation of the proposed method, a certified reference material (CRM) of human hair (BCR 397) was used. No significant difference (P > 0.05) was observed between the experimental results and certified values of the CRM (paired t-test). The LOD and LOQ obtained under the optimal conditions were 0.025 and 0.083 microg/kg, respectively. The developed method was applied for the determination of As in scalp hair samples from male and female subjects of two villages of Khairpur Mir's, Pakistan.

A simple and rapid cloud point extraction method was applied for preconcentration of trace quantities of zinc (Zn) and iron (Fe) in biological samples (serum and urine) of thyroid patients prior to determination by flame atomic absorption spectrometry. The metals in serum and urine samples were complexed with 1-(2-thiazolylazo)-2-naphthol and entrapped in the surfactant octylphenoxypolyethoxyethanol (Triton X-114). After centrifugation, the surfactant-rich phase was diluted with 0.1 M HNO3 in methanol. For optimum recovery of analytes, the influences of the analytical parameters, including pH and amounts of complexing and surfactant reagents, were investigated. Enrichment factors of 66.4 and 70.2 were obtained for the preconcentration of Zn(II) and Fe(III), respectively. The obtained results showed sufficient recoveries (>98%) for Zn(II) and Fe(III) in certified reference materials (CRMs). The proposed method was applied to the determination of Zn(II) and Fe(III) in biological (serum and urine) samples and CRMs.

A simple and rapid microwave-assisted extraction (MAE) of selenium (Se) from medicinal plants was investigated using different concentrations of nitric acid and hydrochloric acid, sample mass, heating time, microwave energy, and plant particle size. The optimization strategy was carried out using multivariate methodologies. Electrothermal atomic absorption spectrometry was used to determine Se. The accuracy of the optimized procedure was evaluated by using certified reference materials with certified values for Se and a microwave-assisted acid digestion (MD) method for comparative purpose. No significant difference was observed (P > 0.05) when comparing the values obtained by the proposed MAE and MD methods (paired t-test). Under the optimum operating conditions, the LOD obtained from the standard calibration curve was 0.012 microg/L for Se. The average RSD of the MAE method varied between 4.05 and 7.53% (n = 6). The proposed method was successfully applied for the determination of Se in medicinal plants used as remedies for cancerous and infection diseases.

A simple and rapid ultrasound-assisted extraction procedure was developed for the determination of total mercury (Hg) in muscle tissues of freshwater fish species. A Plackett-Burman experimental design was used as a multivariate strategy for the evaluation of the effects of variables, such as presonication time (without ultrasonic stirring), sonication time, ultrasonic bath temperature, nitric acid concentration, hydrochloric acid concentration, and sample mass of muscle tissues. Some variables showed a significant effect on recovery, and they were further optimized by a 2(3) + star central composite design that involved 16 experiments. The validation was carried out by analysis of certified reference material DORM-2 (dog fish muscles); for comparative purposes, an acid digestion induced by microwave energy was used. Cold vapor atomic absorption spectrometry was used for the determination of total Hg. No significant differences were established between the analytical results and the certified values (paired t-test at P > 0.05). The LOD and LOQ of Hg were 0.133 and 0.445 microg/kg, respectively, which demonstrated the high sensitivity of the proposed procedure for the determination of Hg at trace levels. The Hg concentrations in the muscle tissues of 10 freshwater fish species were found in the range of 35.3-67.8 microg/kg on a dried basis, which were within the permissible limit of the World Health Organization.