Search

Tunability is a fundamental prerequisite for functional devices and forms the backbone of reconfigurable microwave photonic (MWP) signal processors. In this paper, we explore the use of indium tin oxide (ITO) thin films, notable for their combination of optical transparency and electrical conductivity, to provide tunability for integrated MWP devices. We study the impacts of post-thermal annealing on the structural, electrical, and optical properties of ITO films. The annealed ITO microheater maintains a low total insertion loss of just 0.1 dB while facilitating the tunability of the microring across the entire free spectral range (FSR) using less than half the voltage required by its non-annealed counterpart. Furthermore, the post-annealed ITO film exhibits a 30% improvement in response time, enhancing its performance as an active voltage-controlled microheater. Leveraging this advantage, we employed the post-annealed device to demonstrate continuous tunable radio frequency (RF) phase shifts from 0-330° across a frequency range spanning 15 GHz to 40 GHz with only 5.58 mW of power. The flexibility in modifying the ITO thin film properties effectively bridges the gap between achieving low-loss and high-speed thermo-optic based microheaters.

Germanium-on-Silicon (Ge-on-Si) avalanche photodiodes (APDs) are of considerable interest as low intensity light detectors for emerging applications. The Ge absorption layer detects light at wavelengths up to ≈ 1600 nm with the Si acting as an avalanche medium, providing high gain with low excess avalanche noise. Such APDs are typically used in waveguide configurations as growing a sufficiently thick Ge absorbing layer is challenging. Here, we report on a new vertically illuminated pseudo-planar Ge-on-Si APD design utilizing a 2 µm thick Ge absorber and a 1.4 µm thick Si multiplication region. At a wavelength of 1550 nm, 50 µm diameter devices show a responsivity of 0.41 A/W at unity gain, a maximum avalanche gain of 101 and an excess noise factor of 3.1 at a gain of 20. This excess noise factor represents a record low noise for all configurations of Ge-on-Si APDs. These APDs can be inexpensively manufactured and have potential integration in silicon photonic platforms allowing use in a variety of applications requiring high-sensitivity detectors at wavelengths around 1550 nm.

High-density silicon waveguide arrays manufactured on a complementary metal-oxide-semiconductor (CMOS)-foundry platform hold great promise for optical information processing and photonic integration. However, evanescent waves arising from nanoscale confinement would cause significant optical crosstalk in waveguide arrays, which remains a vital issue in various applications. Here, by utilizing silicon photonic nanohole metamaterials, we propose a scheme to greatly suppress the crosstalk in the devices and then demonstrate ultra-compact low-crosstalk waveguide arrays. For a 100-µm-long waveguide array at a half-wavelength pitch, low crosstalk of -19 dB can be obtained in a wide range of wavelengths (1500 nm-1580 nm). In the experimental demonstrations, our approach exhibits the ability to suppress the crosstalk over a broad bandwidth without substantially increasing the propagation loss as well as the promising design flexibility, which shall pave the way for metamaterials enabled high-density waveguide arrays.

In this paper, a reflective microring resonator (MRR)-based microwave photonic (MWP) sensor incorporating a self-attention convolutional neural network (CNN) is presented. An MRR cascaded with an inverse-designed optical reflector is adopted as the sensor probe to allow for utilizing the responses generated from both the clockwise and counterclockwise resonant modes. Through the MWP interrogation, the cascaded resonant modes can be transformed into distinctive deep radio-frequency (RF) spectral notches under different modulator bias conditions. By using a self-attention assisted CNN processing to leverage both the local and global features of the RF spectra, a sensing model with improved accuracy can be established. As a proof of concept, the proposed scheme is experimentally demonstrated in temperature sensing. Even with a small dataset, the root-mean-square error of the sensing model established after training is achieved at 0.026°C, which shows a 10-fold improvement in sensing accuracy compared to that of the traditional linear fitting model.

Putrescine and cadaverine are significant volatile indicators used to assess the degree of food spoilage. Herein, we propose a micro-nano multi cavity structure for surface-enhanced Raman spectroscopy (SERS) to analyze the volatile gas putrescine and cadaverine in decomposing food. The MoS 2 nano-flowers are inserted into a PVDF micro-cavity through in-situ growth, followed by vacuum evaporation technology of Ag nanoparticles to form an Ag/MoS 2 nano-flower cavity/PVDF micron-bowl cavity (FIB) substrate. The micro-nano multi cavity structure can improve the capture capacity of both light and gas, thereby exhibiting high sensitivity (EF = 7.71 × 10 7 ) and excellent capability for gas detection of 2-naphthalenethiol. The SERS detections of the putrescine and cadaverine are achieved in the spoiled pork samples with the FIB substrate. Therefore, this substrate can provide an efficient, accurate, and feasible method for the specific and quantitative detection in the food safety field.

Although underwater wireless optical communication (UWOC) has the advantages of high speed, low latency, and high confidentiality, the transmission of light in water will be affected by the absorption and scattering of particles, which will lead to the aggravation of channel path loss as well as channel pulse spreading, finally causing false codes. Therefore, how to analyze the channel impulse response (CIR) effectively is a key task in channel modeling. In this paper, we consider a two-way underwater vertical line-of-sight (LOS) communication system model, based on the inherent optical property (IOP) model of chlorophyll, using the Kopelevich phase function containing water depth information, the CIR curves under different water types and transceiver configurations are plotted using the Monte-Carlo Simulation (MCS). The obtained simulation results are fitted with the double gamma function (DGF) model and the Gaussian model, respectively. The Gaussian model exhibits better properties than the DGF model in each water condition. Based on the closed-form expression of the CIR obtained from the Gaussian model, we solve for the bit error rate (BER) and 3-dB bandwidth of the system under different settings. The conclusions obtained can be used for the design and optimization of underwater vertical channels.

Al x Ga 1-x As y Sb 1-y grown lattice-matched to InP has attracted significant research interest as a material for low noise, high sensitivity avalanche photodiodes (APDs) due to its very dissimilar electron and hole ionization coefficients, especially at low electric fields. All work reported to date has been on Al concentrations of x = 0.85 or higher. This work demonstrates that much lower excess noise (F = 2.4) at a very high multiplication of 90 can be obtained in thick Al 0.75 Ga 0.25 As 0.56 Sb 0.44 grown on InP substrates. This is the lowest excess noise that has been reported in any III-V APD operating at room temperature. The impact ionization coefficients for both electrons and holes are determined over a wide electric field range (up to 650 kV/cm) from avalanche multiplication measurements undertaken on complementary p-i-n and n-i-p diode structures. While these ionization coefficients can fit the experimental multiplication over three orders of magnitude, the measured excess noise is significantly lower than that expected from the β/α ratio and the conventional local McIntyre noise theory. These results are of importance not just for the design of APDs but other high field devices, such as transistors using this material.

Based on the dispersion-folded digital back-propagation (DBP) method, we propose a low-complexity digital nonlinearity-compensation scheme to enhance the system performance of optical phase conjugation (OPC)-aided transmission whilst preserving the low computational requirement of dispersion-folded DBP. When the transmission reach is increased, the computational efficiency of the proposed scheme becomes more apparent compared with conventional DBP while the performance penalty is negligible.

We have used photon pair correlations generated via spontaneous parametric downconversion (SPDC) to measure the fluorescence lifetime of the organic dye rhodamine 6 G, demonstrating that fluorescence lifetime measurements can be achieved using a continuous wave (CW) laser, without pulsed or modulated lasers. Our entangled photon method, quantum fluorescence lifetime (Q-FL) measurements, uses one photon to excite fluorescence and the resulting fluorescence photon is timed and referenced to the arrival time of the other entangled photon. Thus, we can exploit the short timescale of photon pair correlations to conduct experiments that are typically carried out with pulsed lasers and we show that the inherent timing of the photons is fast enough to resolve the nanosecond scale fluorescence lifetime of the sample. This measurement paves the way towards using the time correlations of entangled photons for fluorescence imaging; capitalizing on the presence of fast, sub-100 ps correlations that have not been demonstrated classically.

In a non-line-of sight reflective underwater wireless optical communications (UWOC) link, the transmitted beam relies on reflections from the sea surface to propagate to the underwater receiver. Most previous research on reflective channels has sufficiently considered single reflections from a smooth or rough surface, while ignoring the effect of multiple reflections. In fact, a rough sea surface may cause the reflected photons to hit the sea surface again, which is referred as a multiple reflection process. To make up for deficiencies in the existing literature, we first construct a capillary waves rough sea surface model, and then present a multiple reflection channel model with the help of the Monte Carlo ray tracing approach. The path loss and channel impulse response (CIR) were further evaluated based on the model for different communications scenarios. Numerical results suggest that multiple reflections increase the path loss by more than about 5 dB, and reduce the CIR amplitude to less than one-third compared to a single reflection. The work done in this paper aims to provide theoretical support for UWOC system design.

The conventional belief propagation (BP) of the low-density parity-check (LDPC) is designed based on additive white Gaussian noise (AWGN) close to the Shannon limit; however, the correlated noise due to chromatic dispersion or square-law detection results in a performance penalty in the intensity modulation and direct-detection (IM/DD) system. We propose an iterative BP cascaded convolution neural network (CNN) decoder to mitigate the correlated channel noise. We use a model of correlated Gaussian noise to verify that the noise correlation can be identified by the CNN and the decoding performance is improved by the iterative processing. We successfully demonstrate the proposed method in a 50-Gb/s 4-ary pulse amplitude modulation (PAM-4) IM/DD system. The simulation results show that the proposed decoder can achieve a BER performance improvement which is robust to transmission distance and launch optical power. The experimental results show that the iterative BP-CNN decoder outperforms the standard BP decoder by 1.2 dB in received optical power over 25-km SSMF.

The recently introduced power spectrum model for natural water turbulence, i.e., that at any average temperature, average salinity, and stratification [J. Opt. Soc. Am. A37, 1614 (2020)JOAOD61084-752910.1364/JOSAA.399150], is extended from weak to moderate-to-strong regimes with the help of the spatial filtering approach. Based on the extended spectrum, the expressions for the scintillation index (SI) are obtained, and based on its signal-to-noise ratio and bit error rate of the underwater wireless optical communication (UWOC) system with the on-off-keying modulation and gamma-gamma irradiance distribution model, the analysis is performed. The obtained results are compared with those derived from the widely used Nikishov and Nikishov spectrum. It is shown that the natural water turbulence results in the SI for plane (spherical) waves attaining higher maxima values at shorter propagation distances, about 20 m (40 m) with respect to 30 m (50 m) of Nikishovs turbulence. Therefore, it predicts a stronger degradation of the UWOC system performance in weak and moderate turbulence regimes.

The self-luminous cockpit displays need to be adaptive to a wide range of ambient light levels, which changes from very low illuminance to very high levels. Yet, current studies on evaluation and luminance setting of displays in bright surroundings are still limited. In this study, a three-dimensional visual ergonomic experiment was carried out to investigate how bright a cockpit display should be to meet aircrew operational requirements under different illuminance. A lab study with a within-subjects (N = 12) design was conducted in a simulated cockpit. According to the Weber-Fechner's Law, human observers evaluated five display luminance conditions (10 1 , 10 1.5 , 10 2 , 10 2.5 , 10 3 cd/m 2 ) under five ambient illuminance conditions (10°, 10 1 , 10 2 , 10 3 , 10 4 lx). Visual performance, visual fatigue and visual comfort were used as evaluation bases, which were measured by d2 task, subjective fatigue questionnaire and visual perception semantic scales. Nonlinear function fitting was used to calculate the optimal luminance under a certain illuminance. Finally, curvilinear regression was used to analyze the illuminance and its corresponding optimal luminance. Based on Silverstein luminance power function, a luminance adjustment model with the form of power function was obtained. The proposed three-dimensional model fits the experimental data well and is consistent with the existing studies. It can be regarded as a supplement and optimization of the previous model under high ambient illuminance. This study can contribute not only to the pleasing luminance setting of panel displays in aircraft cockpits but also to other self-luminous devices, such as tablet devices, outdoor monitoring equipment and advertising screens.

We present the design, fabrication, and characterization of cascaded silicon-on-insulator photonic crystal microring resonators (PhCMRRs) for dual-parameter sensing based on a multiple resonances multiple modes (MRMM) technique. Benefitting from the slow-light effect, the engineered PhCMRRs exhibit unique optical field distributions with different sensitivities via the excitation of dielectric and air modes. The multiple resonances of two distinct modes offer new possibilities for enriching the sensing receptors with additional information about environmental changes while preserving all essential properties of traditional microring resonator based sensors. As a proof of concept, we demonstrate the feasibility of extracting humidity and temperature responses simultaneously with a single spectrum measurement by employing polymethyl methacrylate as the hydrophilic coating, obtaining a relative humidity (RH) sensitivity of 3.36 pm/%RH, 5.57 pm/%RH and a temperature sensitivity of 85.9 pm/°C, 67.1 pm/°C for selected dielectric mode and air mode, respectively. Moreover, the MRMM enriched data further forges the capability to perform mutual cancellation of the measurement error, which improves the sensing performance reflected by the coefficient of determination (R 2 -value), calculated as 0.97 and 0.99 for RH and temperature sensing results, respectively.

In this paper, we propose a digital coherent demodulation architecture using fully interpretable deep neural networks (NNs). We show that all the conventional coherent digital signal processing (DSP) is deeply unfolded into a well-structured NN so that the established training algorithms in machine learning can be applied. In contrast to adding or replacing certain algorithms of existing DSP in coherent receivers, we replace all the coherent demodulation algorithms with a fully interpretable NN (FINN), making the whole NN interpretable. The FINN is modular and flexible to add or drop modules, including chromatic dispersion compensation (CDC), the digital back-propagation (DBP) algorithm for fiber nonlinearity compensation, carrier recovery and residual impairments. The resulted FINN can be quickly initialized by straightforwardly referring to the conventional DSP, and can also enjoy further performance enhancement in the nonlinear fiber transmissions by NN. We conduct a 132-Gb/s polarization multiplexed (PM)-16QAM transmission experiment over 600-km standard single mode fiber. The experimental results show that without fiber nonlinearity compensation, FINN-CDC obtains less than 0.06-dB SNR gain than chromatic dispersion compensation (CDC). However, with fiber nonlinearity compensation, 2-steps per span FINN-DBP (FINN-2sps-DBP) and FINN-1sps-DBP bring about 0.59-dB and 0.53-dB SNR improvement compared with the conventional 2sps-DBP and 1sps-DBP, respectively.

In this Letter, a low-cost radio-over-fiber (RoF) system at the Ka band based on a low-resolution digital-to-analog converter (DAC) is proposed and investigated. The noise shaping (NS) technique is adopted to suppress the in-band quantization noise induced by the low-resolution DAC. To evaluate the performance of the proposed RoF system, the transmission of a 80/100-Gbit/s dual-polarization 16/32-QAM signal over 20-km single-mode fiber (SMF) and 1-m 2 × 2 multi-in multi-out (MIMO) wireless link coupled with a 2/3/4-bit DAC is experimentally demonstrated. The results show that the bit error rate (BER) of the signal generated by the 2-bit DAC can be effectively reduced by more than one order of magnitude when noise shaping is applied.

We measure the photothermal nonlinear response in suspended cubic silicon carbide (3C-SiC) and 3C-SiC-on-insulator (SiCOI) microring resonators. Bi-stability and thermo-optic hysteresis is observed in both types of resonators, with the suspended resonators showing a stronger response. A photothermal nonlinear index of 4.02×10 -15 m 2 /W is determined for the suspended resonators, while the SiCOI resonators demonstrate one order of magnitude lower photothermal nonlinear index of 4.32×10 -16 m 2 /W. Cavity absorption and temperature analysis suggest that the differences in thermal bi-stability are due to variations in waveguide absorption, likely from crystal defect density differences throughout the epitaxially grown layers. Furthermore, coupled mode theory model shows that the strength of the optical bi-stability, in suspended and SiCOI resonators can be engineered for high power or nonlinear applications.

In this paper, 100 Gb/s/λ 32 quadrature amplitude modulation discrete multi-tone (QAM-DMT) transmission using 10 G-class electro-absorption modulated laser (EML) and 4/5-bit digital-to-analog converters (DACs) are experimentally demonstrated to meet the requirement of intra-datacenter interconnection (intra-DCI). Unequal length multi-band (ULM) discrete Fourier transform spread (DFT-S) precoding is investigated to alleviate the distortion induced by the high peak-to-average power ratio (PAPR) of DMT. The results show that the required computational complexity of ULM DFT-S precoding with 2-bands (k 1 =256, k 2 =64) decreases sharply compared to the traditional DFT-S technique with only about 0.5 dB receiver sensitivity penalty. In addition, compared to the equal length multi-band (ELM) DFT-S precoding, the ULM DFT-S precoding can bring about 2.5 dB receiver sensitivity improvement with slight added computational complexity. With the assistance of ULM DFT-S precoding and noise shaping (NS) technique, the bit-error ratio (BER) of 100 Gb/s 32 QAM-DMT signal generated by 5-bit DAC over 2-km single-mode fiber (SMF) transmission can reach the hard-decision forward error correction (HD-FEC) threshold with received optical power (ROP) of -6.5 dBm, with only additional 39.9% multiplier and 33.7% adder.

In this paper, a chiral excitation method based on the asymmetric interface condition is proposed. The chiral characteristics of the metamaterials are affected by the difference in the environmental parameters of the front and rear surfaces. Thus, the device can achieve functional reconfiguration and two applications based on this mechanism are presented, one for sensing and the other for chiral switching. At the same time, a self-calibration measurement method that greatly simplifies the sensing system is proposed. These results have potential applications in the fields of chirality excitation, bio-sensing, and reconfigurable device.

Wavefront aberrations in the image space are critical for visual perception, though the clinical available instruments usually give the wavefront aberrations in the object space. This study aims to compare the aberrations in the object and image spaces. With the measured wavefront aberrations over the horizontal and vertical ±15° visual fields, the in-going and out-going wide-field individual myopic eye models were constructed to obtain the wavefront aberrations in the object and image spaces of the same eye over ±45° horizontal and vertical visual fields. The average differences in the mean sphere and astigmatism were below 0.25 D between the object and image spaces over the horizontal and vertical ±45° visual fields under 3 mm and 6 mm pupil diameter. The wavefront aberrations in the object space are a proper representation of the aberrations in the image space at least for horizontal visual fields ranging from -35°to +35° and vertical visual fields ranging from -15°to +15°., Competing Interests: The authors declare no conflict of interest., (© 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement.)

The light propagating in an underwater wireless optical communications (UWOC) channel suffers absorption and scattering effects jointly caused by particles and turbulence. By using Monte Carlo simulation (MCS), most of the research involving UWOC channel modeling has sufficiently considered the attenuation caused by particles while ignoring or erroneously considering the absorption and scattering effects induced by turbulence, which will result in an underestimation of attenuation. Motivated by this, we use a MCS method to construct a more complete and more reasonable channel model, which makes up for the deficiencies of previous studies and provides a general analysis framework for the absorption and scattering effects brought by the two factors of particles and turbulence. We further study the path loss, channel impulse response (CIR), and probability density function (PDF) of the light intensity under different communication scenarios. Results show that, compared to the situation involving only particle effects, the addition of consideration of turbulence effects increases the path loss by more than 5 dB, reduces the CIR amplitude to less than one-third, and makes the light intensity PDF become more dispersed. Our research can provide certain theoretical guidance for UWOC system design and performance evaluation.

In this paper, we propose a pre-trained-combined neural network (PTCN) as a comprehensive solution to the inverse design of an integrated photonic circuit. By utilizing both the initially pre-trained inverse and forward model with a joint training process, our PTCN model shows remarkable tolerance to the quantity and quality of the training data. As a proof of concept demonstration, the inverse design of a wavelength demultiplexer is used to verify the effectiveness of the PTCN model. The correlation coefficient of the prediction by the presented PTCN model remains greater than 0.974 even when the size of training data is decreased to 17%. The experimental results show a good agreement with predictions, and demonstrate a wavelength demultiplexer with an ultra-compact footprint of 2.6×2.6µm 2 , a high transmission efficiency with a transmission loss of -2dB, a low reflection of -10dB, and low crosstalk around -7dB simultaneously.

Heterogeneous integration of nitrides on Si (100) is expected to open the door to the new possibilities for this material system in the fields of high-speed integrated photonics and information processing. In this work, GaN epitaxial layer grown on the patterned sapphire substrate is transferred onto Si (100) by a combination of wafer bonding, laser lift-off and chemical mechanical polishing (CMP) processes. The GaN epilayer transferred is uniformly thinned down to 800 nm with a root mean square surface roughness as low as 2.33 Å. The residual stress within the InGaN quantum wells transferred is mitigated by 79.4% after the CMP process. Accordingly, its emission wavelength exhibits a blue shift of 8.8 nm, revealing an alleviated quantum-confined Stark effect. Based on this platform, an array of microcavities with diverse geometrics and sizes are fabricated, by which optically-pumped green lasing at ∼505.8 nm is achieved with a linewidth of ∼0.48 nm from ∼12 µm microdisks. A spontaneous emission coupling factor of around 10 -4 is roughly estimated based on the light output characteristics with increasing the pumping densities. Lasing behaviors beyond the threshold suggest that the microdisk suffers less thermal effects as compared to its undercut counterparts. The electrically-injected microdisks are also fabricated, with a turn-on voltage of ∼2.0 V and a leakage current as low as ∼2.4 pA at -5 V. Being compatible with traditional semiconductor processing techniques, this work provides a feasible solution to fabricate large-area heterogeneously integrated optoelectronic devices based on nitrides.

Legionella is a genus of ubiquitous environmental pathogens found in freshwater systems, moist soil, and composted materials. More than four decades of Legionella research has provided important insights into Legionella pathogenesis. Although standard commercial microscopes have led to significant advances in understanding Legionella pathogenesis, great potential exists in the deployment of more advanced imaging techniques to provide additional insights. The lattice light sheet microscope (LLSM) is a recently developed microscope for 4D live cell imaging with high resolution and minimum photo-damage. We built a LLSM with an improved version for the optical layout with two path-stretching mirror sets and a novel reconfigurable galvanometer scanner ( RGS ) module to improve the reproducibility and reliability of the alignment and maintenance of the LLSM. We commissioned this LLSM to study Legionella pneumophila infection with a tailored workflow designed over instrumentation, experiments, and data processing methods. Our results indicate that Legionella pneumophila infection is correlated with a series of morphological signatures such as smoothness, migration pattern and polarity both statistically and dynamically. Our work demonstrates the benefits of using LLSM for studying long-term questions in bacterial infection. Our free-for-use modifications and workflow designs on the use of LLSM system contributes to the adoption and promotion of the state-of-the-art LLSM technology for both academic and commercial applications., Competing Interests: The authors declare no conflict of interests., (© 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement.)

Versatile applications have driven a desire for dual-band detection that enables seeing objects in multiple wavebands through a single photodetector. In this paper, a concept of using graphene/p-GaN Schottky heterojunction on top of a regular AlGaN-based p-i-n mesa photodiode is reported for achieving solar-/visible-blind dual-band (275 nm and 365 nm) ultraviolet photodetector with high performance. The highly transparent graphene in the front side and the polished sapphire substrate at the back side allows both top illumination and back illumination for the dual band detection. A system limit dark current of 1×10 -9 A/cm 2 at a negative bias voltage up to -10 V has been achieved, while the maximum detectivity obtained from the detection wavebands of interests at 275 nm and 365 nm are ∼ 9.0 ×10 12 cm·Hz 1/2 /W at -7.5 V and ∼8.0 × 10 11 cm·Hz 1/2 /W at +10 V, respectively. Interestingly, this new type of photodetector is dual-functional, capable of working as either photodiode or photoconductor, when switched by simply adjusting the regimes of bias voltage applied on the devices. By selecting proper bias, the device operation mode would switch between a high-speed photodiode and a high-gain photoconductor. The device exhibits a minimum rise time of ∼210 µs when working as a photodiode and a maximum responsivity of 300 A/W at 6 μW/cm 2 when working as a photoconductor. This dual band and multi-functional design would greatly extend the utility of detectors based on nitrides.

In an actual scene, underwater optical wireless communication (UOWC) transceivers may not be perfectly aligned from the start due to imprecise operation or disturbances such as water flow, and thus outdated pointing errors can no longer reliably reflect precise channel conditions. In this paper, for the first time, to our knowledge, we formulate a comprehensive misalignment errors model by taking into account both random jitter and initial misalignment errors. Furthermore, we deduce an effective receiving area due to the deflection of the receiver with three rotation angles in three-dimensional space. Moreover, we also apply the above findings to the composite fading channel model, which is more accurate and practical than the previous. Finally, we develop closed-form results for the bit error rate (BER) in terms of the Meijer G-function of UOWC systems. The performance is also analyzed by the multiplicative statistical channel model. Results demonstrate that comprehensive misalignment errors exacerbate performance degradation in terms of both average BER and outage probability, compared to pointing errors considering only random jitter. It indicates that the initial misalignment errors are not negligible, and analyzing scenes with comprehensive misalignment errors is of great importance in practice.

Chromatic dispersion-enhanced signal-signal beating interference (SSBI) considerably affects the performance of intensity-modulation and direct-detection (IM/DD) fiber transmission systems. For recovering optical fields from received double sideband signals after propagating through IM/DD transmission systems, Gerchberg-Saxton (G-S) iterative algorithms are promising, which, however, suffers slow convergence speeds and local optimization problems. In this paper, we propose a multi-constraint iterative algorithm (MCIA) to extend the Gerchberg-Saxton-based linearized detection. The proposed technique can accelerate the convergence speed and realize nonlinear-equalization-free detection. Based on the data-aided iterative algorithm (DIA) and the decision-directed data-aided iterative algorithm (DD-DIA), the proposed technique reuses redundant bits from channel coding to not only correct decision errors but also enforce the constraints on the task function to further accelerate the whole optical field retrieval processing. Simulation results show that, compared with the DD-DIA, the MCIA reduces the received optical power (ROP) by about 1.5-dB for a 100-Gb/s over 50-km SSMF PAM-4 signal transmission at the symbol error rate (SER) of 2×10 -2 . For a 100-Gb/s over 400-km SSMF transmission system, just 30 MCIA iterations is needed, which is 30% reduction in iteration count compared with the DD-DIA. For further increased transmission capacities, the MCIA can improve the SER by two orders of magnitude compared with the conventional IA. To validate the effectiveness of the MCIA, we also conduct experiments to transmit 92-Gb/s PAM-4 signals over 50-km IM/DD fibre systems. We find that the MCIA has a 1-dB ROP improvement compared with the DD-DIA. Compared with Volterra nonlinear equalization, the BERs of the MCIA with a simple linear equalizer are reduced by more than one order of magnitude with only 52 MCIA iterations.

Here we demonstrate an ultra-compact 8-channel sinusoidal silicon waveguide array for an optical phased array. In our device, based on sinusoidal bending, the cross talk (CT) between waveguides can be efficiently reduced with a waveguide pitch of only 695 nm. For the transverse electric (TE) mode, the simulation results show that the insertion loss (IL) of the 100-µm-long device is 0.1 dB and the CT between all waveguides is lower than -25 dB at 1550 nm. In the measurements, an IL of less than 1 dB and CT lower than -18 dB are obtained. Since the pitch is related to the beam-steering range and power consumption of the optical phased array, such an ultra-compact device could potentially be a good candidate to build the emitter for an energy-efficient optical phased array with a large field of view.

In this work, an ultra-sharp multimode waveguide bend (MWB) based on gradient shallowly etched grooves is proposed and demonstrated. With a bending radius of only 5.6 μm, our shallowly-etched-groove multimode waveguide bend (SMWB) can enable low excess loss and low-crosstalk propagation with the four lowest-order TE mode-channels, simultaneously. In the simulation, the excess losses of the proposed 90°- SMWB for TE 0 -TE 3 are all below 0.46 dB and the inter-mode crosstalks are lower than -18 dB in 1500 nm-1600 nm. Furthermore, the measured results of the fabricated 90°- SMWB show that the excess losses for TE 0 -TE 3 are less than 1 dB and the inter-mode crosstalks are all below -14 dB in 1510 nm-1580 nm. Such a proposed device thus provides a promising solution for ultra-compact MWBs in multimode silicon photonics.

We propose and experimentally demonstrate symmetrical (homo-modal) and asymmetrical (hetero-modal) full-duplex bi-directional architectures based on dual-vector eigenmodes multiplexing over a 3 km few mode fiber (FMF). Firstly, 4 vector modes (VMs) of 2 mode groups (MGs), l = 0 (HE 11o and HE 11e modes) and l = +2 (EH 11o and EH 11e modes), each carrying a 14 GBaud quadrature phase-shift keying (QPSK) signal, are utilized in the up and down links and a 224 Gb/s same-mode bi-directional transmission is successfully realized. The crosstalk between the VMs in l = 0 and l = +2 of this full-duplex system is less than -13.8 dB. To strengthen the immunity to performance degradation induced by connector reflection and back scattering, we propose an effective approach to mitigate impairments by using hetero-modes on two terminals of the bi-directional system. Then, 2 VMs of l = 0 and 2 VMs of l = +2 are respectively employed in the up and down streams. The channel isolation between the VMs in l = 0 and l = +2 of such full-duplex link is larger than 19 dB, which supports a 448 Gb/s bi-directional transmission with 28 GBaud 16-ary quadrature amplitude modulation (QAM) modulation over a 3 km FMF by using 2 × 2 MIMO. Moreover, mode-wavelength division multiplexing including 2 modes and 4 wavelengths in both up and down streams is implemented in the transmission system. A total capacity of the 1.792 Tb/s link with 28 GBaud 16-QAM signal over each channel is successfully realized over the 3 km FMF. The measured bit-error-ratios (BERs) of all channels are below the 7% hard decision forward error correction (FEC) threshold at 3.8 × 10 -3 . The experimental results adequately indicate that such a scheme has a great potential in high-speed bi-directional point-to-point (P2P) optical interconnects.

Phosphor-converted blue laser diodes are regarded as the next-generation high-brightness solid-state lighting sources. However, it is difficult to obtain white light with high angular color uniformity due to the Gaussian distribution of the laser light sources. Meanwhile, laser excitation power density of the light source is high, which would bring serious heating effects to the phosphor layers. In this study, a strategy has been proposed to solve the problem by using remote sediment phosphor plates. In detail, we have compared the effects of remote sediment/non-sediment phosphor plates to the phosphor-converted blue laser diodes on the overall light output characteristics, angular optical distribution properties, as well as their thermal performance. The emission from sediment phosphor samples has been found more divergent, and angular deviation in the correlated color temperature of the emitted light could be greatly reduced from 1486 to 294 K, yet with only 5% luminous flux loss, as compared to non-sediment phosphor samples. Most importantly, the sediment phosphor sample pushes the power damage threshold up to 588.1 W/cm 2 (non-sediment sample: 512.3 W/cm 2 ). Our work has demonstrated the sediment phosphor plates would ameliorate the angular color uniformity for the laser-based lighting source, while extending its lifespan with improved thermal stability.

This Letter proposes a circularly polarized (CP) light GaN micro-LED which is integrated with functional metasurfaces. The one-dimensional metallic nanograting can achieve a high transverse electric (TE) reflectivity (${{\rm{R}}_{\rm{TE}}}$) and extinction ratio (ER) of TE and transverse magnetic (TM) waves, which is highly polarized output for micro-LEDs. Besides, the nanograting, which is integrated on the bottom of the GaN layer, can also support a resonant cavity, together with the top distributed Bragg reflector, which can shape the radiation pattern. By optimizing the structure parameters of nanograting, the ${{\rm{R}}_{\rm{TE}}}$ achieves over 80%, and the ER reaches higher than 38 dB at 450 nm for the GaN micro-LED. Additionally, the metasurface, which acts as a quarter-wave plate, was investigated to control the phase delay between the polarization state of the electric wave in two orthogonal components. Finally, the circular shape of the transmitted pattern denotes the high performance of the metasurface which is integrated in the micro-LED for CP light emission. The work reported in this Letter might provide potential application in a 3D polarized light display.

In this paper, we propose the convergent beam array to reduce scintillation induced by oceanic turbulence in underwater wireless optical communications (UWOCs) between misaligned transceivers. In the proposed convergent beam array, the propagation directions of beams are slanted inwards and different from each other. First, we present the convergent beam array system and analyze spatial relationships between the transmitter and the individual beam in beam array systems. Then, in order to simulate beams propagation in UWOCs, we review the power spectrum of refractive index fluctuations in oceanic turbulence and analyze the spatial relationship between the misaligned transceivers in view of pointing errors. Finally, we verify the effectiveness of the proposed convergent beam array on scintillation reduction by multistep wave optics simulation. Simulation results show that convergent beam array is able to decrease scintillation indices effectively in UWOCs with pointing errors.

Recently, optical metasurfaces have attracted much attention due to their versatile features in manipulating phase, polarization, and amplitude of both reflected and transmitted light. Because it controls over four degrees of freedom: phase, polarization, amplitude, and wavelength of light wavefronts, optical cryptography is a promising technology in information security. So far, information encoding can be implemented by the metasurface in one-dimensional (1D) mode (either wavelength or polarization) and in a two-dimensional (2D) mode of both wavelength and polarization. Here, we demonstrate multiplexing multifoci optical metasurfaces for information encoding in the ultraviolet spectrum both in the 1D and 2D modes in the spatial zone, composed of high-aspect-ratio aluminum nitride nanorods, which introduce discontinuous phases through the Pancharatnam-Berry phase to realize multifoci in the spatial zone. Since the multiplexed multifocal optical metasurfaces are sensitive to the helicity of the incident light and the wavelength is within the ultraviolet spectrum, the security of the information encrypted by it would be guaranteed.

In this work, an ultra-compact low-crosstalk sinusoidal silicon waveguide array is proposed and analyzed. We first design a pair of low-crosstalk sinusoidal silicon waveguides with a pitch of 695 nm, where the sinusoidal bends are the key to reduce the crosstalk between waveguides. Then, based on this idea, we propose a low-crosstalk sinusoidal silicon waveguide array with a 695 nm pitch. The simulation results show that for an array length of 100 µm, the insertion loss is as low as 0.08 dB, and the crosstalk is lower than -26 dB at 1550 nm. The 695 nm pitch waveguide array also exhibits a favorable fabrication error tolerance when taking into account the waveguide width variations in practice. Moreover, within the acceptable range of crosstalk, the center-to-center distance between adjacent waveguides of this array can be further reduced to 615 nm. Since the pitch is related to the power consumption and beam-steering range of the optical phased array, our design provides an effective method to build the emitter for an energy-efficient optical phased array with a large field of view.

This Letter presents an approach to produce multiplexable optical fiber chemical sensor using an intrinsic Fabry-Perot interferometer (IFPI) array via the femtosecond laser direct writing technique. Using the hydrogen-sensitive palladium (Pd) alloy as a functional sensory material, Pd alloy coated IFPI devices can reproducibly and reversibly measure hydrogen concentrations with a detection limit of 0.25% at room temperature. Seven IFPI sensors were fabricated in one fiber and performed simultaneous temperature and hydrogen measurements at seven different locations. This Letter demonstrates a simple yet effective approach to fabricate multiplexable fiber optical chemical sensors for use in harsh environments.

The metasurface promises an unprecedented way for manipulating wavefronts and has strengths in large information capacity for the hologram. However, strong absorption loss for most dielectric materials hinders the realization of such a metasurface operating in the ultraviolet (UV) spectrum. Herein, aluminum nitride (AlN) with an ultrawide bandgap has been utilized as the material of the UV metasurface for multi-plane holography, increasing the information capacity and security level of information storage simultaneously. The metasurface for multi-plane holography achieving a correlation coefficient of over 0.8 with three reconstructed images has been investigated, and also the single-plane holography at an efficiency of 34.05%. Our work might provide potential application in UV nanophotonics.

This paper presents a theoretical method for separating bending and torsion of shape sensing sensor to improve sensing accuracy during its deformation. We design a kind of shape sensing sensor by encapsulating three fibers on the surface of a flexible rod and forming a triangular FBG sensors array. According to the configuration of FBG sensors array, we derive the relationship between bending curvature and bending strain, and set up a function about the packaging angle of FBG sensor and strain induced by torsion under different twist angles. Combined with the influence of bending and torsion on strain, we establish a nonlinear matrix equation resolving three unknown parameters including maximum strain, bending direction and wavelength shift induced by torsion and temperature. The three parameters are sufficient to separate bending and torsion, and acquire two scalar functions including curvature and torsion, which could describe 3D shape of rod according to Frenet-Serret formulas. Experimental results show that the relative average error of measurement about maximum strain, bending direction is respectively 2.65% and 0.86% when shape-sensing sensor is bent into an arc with a radius of 260 mm. The separating method also applied to 2D shape and 3D shape of reconstruction, and the absolute spatial position maximum error is respectively 3.79mm and 11.10mm when shape-sensing sensor with length 500mm is bent into arc shape with a radius 260mm and helical curve. The experiment results verify the feasibility of separating method, which would provide effective parameters for precise 3D reconstruction model of shape sensing sensor.

In this paper, we investigate the beam wander in oceanic turbulence taking into account the misaligned displacements caused by slight changes in the position and attitude of the underwater platform. First, we derive the longitudinal distance and radial distance or the misaligned displacements according to the relationship between the misaligned transceivers. Then, we formulate the beam wander variance of a Gaussian beam propagating through oceanic turbulence. Finally, we obtain the beam wander variance in underwater wireless optical communications between the misaligned transceivers according to longitudinal distance. In addition, we express the mean pointing error displacements.

We fabricate suspended single-mode optical waveguides and ring resonators in 3C silicon carbide (SiC) that operate at telecommunication wavelength, and leverage post-fabrication thermal annealing to minimize optical propagation losses. Annealed optical resonators yield quality factors of over 41,000, which corresponds to a propagation loss of 7 dB/cm, and is a significant improvement over the 24 dB/cm in the case of the non-annealed chip. This improvement is attributed to the enhancement of SiC crystallinity and a significant reduction of waveguide surface roughness, from 2.4 nm to below 1.7 nm. The latter is attributed to surface layer oxide growth during the annealing step. We confirm that the thermo-optic coefficient, an important parameter governing high-power and temperature-dependent performance of SiC, does not vary with annealing and is comparable to that of bulk SiC. Our annealing-based approach, which is especially suitable for suspended structures, offers a straightforward way to realize high-performance 3C-SiC integrated circuits.

In a previously published paper [Opt. Express26(17), 22182 (2018)], the performance of a LDPC coded OAM-based UCA FSO system exploring linear equalization with channel estimation over atmospheric turbulence has been analyzed. We find that some concepts and descriptions in [Opt. Express26(17), 22182 (2018)] are inconsistent and paradoxical. In this comment, we point out the referred inconsistency and paradox one by one and present the correct explanations.

Superresolution optical fluctuation imaging (SOFI) is a simple and affordable super-resolution imaging technique, and attracted a growing community over the past decade. However, the theoretical resolution enhancement of high order SOFI is still not fulfilled. In this study, we identify "cusp artifacts" in high order SOFI images, and show that the high-order cumulants, odd-order moments and balanced-cumulants (bSOFI) are highly vulnerable to cusp artifacts. Our study provides guidelines for developing and screening for fluorescence probes, and improving data acquisition for SOFI. The new insight is important to inspire positive utilization of the cusp artifacts., Competing Interests: The authors declare no conflicts of interest., (© 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement.)

Vortex beam carrying angular momentum (OAM) will be disturbed by the random fluctuation of the refraction index of turbulent atmosphere, resulting in intermodal crosstalk among the different OAM modes. Recent advances have demonstrated that the employment of the abruptly autofocusing vortex beams can potentially mitigate the crosstalk effect. In this paper, a new type of abruptly autofocusing vortex beams, called Airy Gaussian vortex beam array (AGVBA) is proposed. By means of multi-plane wave optics simulation, the degradation of signal mode for AGVBA propagating through isotropic atmospheric turbulence is studied. In a comparison with the conventional abruptly autofocusing vortex beams, such as the ring Airy vortex beam (RAVB) and the Airy vortex beam array (AVBA), it is shown that AGVBA achieves more centralized intensity as well as a larger spot at the focal plane, thus can effectively balance the beam spreading and beam wander effect, resulting in mitigation of intermodal crosstalk.