Search

Optical coherence elastography (OCE) is a functional extension of optical coherence tomography (OCT). It offers high-resolution elasticity assessment with nanoscale tissue displacement sensitivity and high quantification accuracy, promising to enhance diagnostic precision. However, in vivo endoscopic OCE imaging has not been demonstrated yet, which needs to overcome key challenges related to probe miniaturization, high excitation efficiency and speed. This study presents a novel endoscopic OCE system, achieving the first endoscopic OCE imaging in vivo . The system features the smallest integrated OCE probe with an outer diameter of only 0.9 mm (with a 1.2-mm protective tube during imaging). Utilizing a single 38-MHz high-frequency ultrasound transducer, the system induced rapid deformation in tissues with enhanced excitation efficiency. In phantom studies, the OCE quantification results match well with compression testing results, showing the system's high accuracy. The in vivo imaging of the rat vagina demonstrated the system's capability to detect changes in tissue elasticity continually and distinguish between normal tissue, hematomas, and tissue with increased collagen fibers precisely. This research narrows the gap for the clinical implementation of the endoscopic OCE system, offering the potential for the early diagnosis of intraluminal diseases., Competing Interests: The authors declare that there are no conflicts of interest related to this article., (© 2024 Optica Publishing Group.)

1.5 µm wavelength high power buried heterojunction (BH) semiconductor lasers having dilute waveguide structure have been fabricated. The optical field is dragged down toward the n side of the device by the dilute waveguide layer, lowering the optical confinement factor of the p doped material and active material, which helps to enlarge the laser output light power. Compared with thick InGaAsP cladding layer, the dilute waveguide material is easy to be grown and has higher thermal conductivity. The slope efficiency of the obtained dilute waveguide BH lasers is notably higher than that of the BH lasers having no dilute waveguide. Our studies show that the dilute waveguide structure is promising for the fabrication of high power BH lasers.

The increasing line density of the reference grating and the accelerating miniaturization of ultra-precision displacement measurement technology necessitate more stable interferometric signal processing methods for high line density gratings, particularly in low signal-to-noise ratio scenarios. This paper presents a phase demodulation method for dynamic interferometric signals for high line density gratings. The Morlet wavelet transform is utilized to obtain the instantaneous frequency of the interferometric signal, integration of which yields the relative displacement, while adding adjacent relative displacements without gaps provides the absolute displacement during dynamic motion of the grating. In simulations with a signal-to-noise ratio ranging from 40 to 70 dB, the proposed method demonstrates greater robustness compared to the traditional method. By establishing a platform for repeated experiments and comparing it with traditional methods, it was found that the maximum deviation between calculation results obtained using this method and traditional methods is 0.8 nm, further confirming its potential application.

Orthogonal frequency-division multiplexing (OFDM) waveform is highly preferred as a dual-function candidate for integrated sensing and communication (ISAC) systems. However, the sensitivity to both carrier frequency offset (CFO) and phase noise greatly impedes its applications in millimeter-wave ISAC systems. Here, we propose and experimentally demonstrate a photonic millimeter-wave ISAC system employing the virtual-carrier-aided self-coherent OFDM technique, wherein a digitally-generated local oscillator is transmitted along with the OFDM signal. Then, a compact CFO-immune and phase noise-immune envelope detection method is implemented for down-converting millimeter-wave communication and radar echo signals. In experiments, a V-band ISAC system is successfully implemented with a simplified remote radio unit, using the remote photonic millimeter-wave heterodyning up-conversion for downlink and the envelope detection-assisted down-conversion for uplink (or radar echoes). In the converged transmission link with a 5-km fiber link and 2-m space link, the Kramers-Kronig (KK) receiver supports a communication data rate up to 16-Gbit/s by mitigating signal-signal beat interference (SSBI). More significantly, the SSBI leads to negligible effects on the sensing performance when classic matched filtering is adopted for target identification. Consequently, a 4.8-cm range resolution and a 4-mm range accuracy are obtained for the radar sensing function.

In this paper, we establish a multi-stage fiber amplifier with pseudo-random binary sequence (PRBS) phase modulation. The stimulated Brillouin gain spectra of the main amplifier with both the unmodulated and pseudo-random binary sequence phase modulated configuration are measured (with corresponding output power), and the stimulated Brillouin scattering (SBS) threshold is investigated experimentally and theoretically. The pseudo-random binary sequence phase modulation parameters are optimized by theoretical simulation. With a two-stage preamplifier chain and a counter-pumping main amplifier stage, a maximum 3.05 kW output power with a slope efficiency of 85.9% is obtained experimentally. The central wavelength of the fiber amplifier is 1050 nm, associated with a full-width at half-maximum linewidth of 13.7 GHz. The stimulated Brillouin scattering reflectivity is below 0.01% at 3.05 kW at 13.7 GHz, which indicates that stimulated Brillouin scattering can be suppressed efficiently at this power and linewidth level.

In recent years, attention has been directed towards cost-effective and compact freeform Schwarzschild imaging spectrometers with plane gratings. The utilization of tolerance analysis serves as a potent approach to facilitate the development of prototypes. Conventional tolerance analysis methods often rely solely on the modulation transfer function (MTF) criterion. However, for a spectrometer system, factors such as the keystone/smile distortion and spectral resolution performance also require consideration. In this study, a tailored comprehensive performance domain tolerance analysis methodology for freeform imaging spectrometers was developed, considering vital aspects such as the MTF, keystone/smile distortion, and spectral resolution. Through this approach, meticulous tolerance analysis was conducted for a freeform Schwarzschild imaging spectrometer, providing valuable insights for the prototype machining and assembly processes. Emphasis was placed on the necessity of precise control over the tilt and decenter between the first and third mirrors, whereas the other fabrication and assembly tolerances adhered to the standard requirements. Finally, an alignment computer-generated hologram (CGH) was employed for the preassembly of the first and third mirrors, enabling successful prototype development. The congruence observed between the measured results and tolerance analysis outcomes demonstrates the effectiveness of the proposed method.

Laser interference lithography is an effective approach for grating fabrication. As a key parameter of the grating profile, the duty cycle determines the diffraction characteristics and is associated with the irradiance of the exposure beam. In this study, we developed a fabrication technique amplitude-splitting flat-top beam interference lithography to improve duty cycle uniformity. The relationship between the duty cycle uniformity and irradiance of the exposure beam is analyzed, and the results indicate that when the beam irradiance nonuniformity is less than 20%, the grating duty cycle nonuniformity is maintained below ±2 % . Moreover, an experimental amplitude-splitting flat-top beam interference lithography system is developed to realize an incident beam irradiance nonuniformity of 21%. The full-aperture duty cycle nonuniformity of the fabricated grating is less than ±3 % . Amplitude-splitting flat-top beam interference lithography improves duty cycle uniformity, greatly reduces energy loss compared to conventional apodization, and is more suitable for manufacturing highly uniform gratings over large areas.

In this paper, we present a novel, to our knowledge, method for the fabrication of slotted surface gratings for buried heterostructure (BH) lasers. In the device fabrication process, SiO 2 strips needed for InP current blocking layer growth are reused for the formation of slot grating pattern masks. In the following growth of the p-InP cladding layer, because the slot areas are covered by SiO 2 , the InP material is grown selectively in only the areas outside the slot areas, forming slots of the surface gratings in the p-InP layer at the same time as the cladding layer growth. Single longitude mode BH lasers having slotted surface gratings have been fabricated successfully, and the spectra show higher than 40 dB side mode suppression ratio (SMSR). The adoption of the method helps to simply the device fabrication and thus lower the device fabrication cost notably.

In recent years, wide field-of-view imaging technology based on a metasurface has been widely applied. However, works on the reported sub-diffraction metalens with a wide field-of-view indicate that multiple structures are essential to effectively eliminate aberrations, which results in a heavy device thickness and weakens the advantage of an ultra-thin metasurface. To solve this problem, according to the super-oscillation theory and the translational symmetry of quadratic phase, as well as the principle of virtual aperture diaphragm based on wave vector filter, this Letter demonstrates a sub-diffraction metalens combined with a single quadratic metalens and a wave vector filter. Our design not only realizes the super-resolution effects of 0.74 to 0.75 times the diffraction limit in the wide field-of-view of nearly 180° for the first time to our knowledge but also compresses the device thickness to the subwavelength order in principle. The proposed ultra-thin sub-diffraction metalens with a wide field-of-view is expected to be applied in the fields of super-resolution fast scanning imaging, information detection, small target recognition, and so on.

We report a theoretical and experimental study on stimulated Brillouin scattering (SBS) suppression in a monolithic fiber amplifier with filtered and amplified pseudo-random binary sequence (PRBS) phase modulation. Theoretically, we use a time-dependent three-wave coupled nonlinear system considering both active fiber and passive fiber to describe the acoustic phonon, laser, and Stokes characteristics in a fiber amplifier. The SBS threshold power after filtered PRBS phase modulation is numerically evaluated to obtain the optimal parameters, and the time-averaged distributions of the counter-pump power, laser power, and Stokes power at different positions along the fiber length of the fiber system are simulated. Also, we established a four-stage fiber amplifier system to verify our theory. The configuration of the fiber amplifier system includes a filtered and amplified PRBS phase-modulated single-frequency fiber laser, a three-stage pre-amplifier, and a counter-pumping main stage, subsequently. 2.5 kW output power with an FWHM linewidth of 9.63 GHz is accomplished by a domestic ytterbium-doped double-clad fiber with core/cladding diameters of 20.2/400  µm. The reflectivity of the main stage is 0.049‰ at the maximum output power, which indicates the proposed architecture is under the SBS threshold. The experiments verify the accuracy of the theoretical model, which provides a reliable reference for evaluating the SBS suppression capability of the high-power narrow-linewidth fiber amplifier phase modulated by the filtered and amplified PRBS signal.

In this paper, we demonstrate a simplified one-to-many scheme for efficient mid-infrared (MIR) parametric conversion. Such a scheme is based on a continuous wave (CW) single longitudinal mode master oscillator power-amplifier (MOPA) fiber system as the signal source and a picosecond pulsed MOPA fiber system, exhibiting multiple longitudinal modes, as the pump source. The signal and pump beams are combined and co-coupled into a piece of 50-mm long 5% MgO-doped PPLN crystal for the parametric conversion. As high as ∼3.82 W average power at a central idler wavelength of ∼3.4 µm is achieved when the launched pump and signal powers are ∼41.73 and ∼11.45 W, respectively. Above some threshold value, the delivered idler power shows a roll-over effect against the signal power and saturation-like effect against the pump power. Consequently, the highest conversion efficiency is observed at such a threshold pump power. To the best of our knowledge, our result represents the highest average power produced from any single-pass parametric conversion source with >3 µm idler wavelength feeding with a CW signal. Moreover, our proposed scheme can simplify the design of parametric conversion system significantly and meanwhile make the system more robust in applications. This is attributed to two main aspects. Firstly, the scheme's one-to-many feature can reduce wavelength sensitivity remarkably in the realization of quasi-phase-matching. Secondly, for moderate power requirement it does not always require a high peak power synchronized pulsed signal source; a CW one can be an alternative, thereby making the system free from complex time synchronization and the related time jitter.

A single-mode InGaAsP/InP buried heterostructure (BH) laser based on high-order slotted surface gratings has been fabricated. The introduction of surface slotted grating can simplify the fabrication process of single-mode BH lasers notably. The laser shows a good single-mode emission performance, with larger than 30 dB side-mode suppression ratio (SMSR) when the current is between 200 and 400 mA. Calculations show that the gain coupling mechanism plays a key role for the slot grating to select the emission wavelength. The linewidth of the laser is measured. The fitted Gaussian and Lorentzian linewidths are 1500 and 550 kHz, respectively.

Beam overlap accuracy in a wavelength beam combination system determines the beam quality and efficiency, so systematic monitoring of overlap accuracy is essential. In this work, a method of performing real-time synchronized monitoring and recording overlap accuracy for a combining beam spot is proposed. Firstly, theoretical calculations for monitoring different wavelength sub-beam positions and angular errors are established. Then, an optical design and grayscale centroid algorithm are developed to analyze and simulate the combination spots. A monitoring device was designed and constructed to meet the requirements of combining system applications, which achieved an accuracy of 8.86 µrad. Finally, the method successfully monitored the system spot fluctuation range within ±22 µrad. This study resolves the issue of distinguishing the different wavelength sub-beams and their response delays in traditional combining beams. It offers precise error data for real-time synchronized calibration of the overlap accuracy in laser beam combining technology.

Free space optical (FSO) communication has gained widespread attention due to its advantages, including high confidentiality, high communication capacity, and no limitation of spectrum. One of the great challenges in FSO communication is the transmission performance degradation in atmospheric turbulence channel due to wavefront distortion and scintillation. Here, we proposed and experimentally demonstrated a 120 Gbit/s vector beam multiplexed coherent optical communication system with turbulence-resilient capacity. Four multiplexed vector beams, each carrying a 30 Gbit/s quadrature phase-shift keying signal, propagate through different turbulence conditions. The influence of turbulence channel on the vector beam impairments is experimentally investigated. Under the weaker turbulence conditions, the system bit error rates are below the forward error correction threshold of 3.8 × 10 -3 . In comparison with the Gaussian mode, the communication interruption probability of the vector beams system decreases from 36% to 12%-18% under stronger turbulence conditions.

We propose an on-chip transverse magnetic (TM)-pass polarizer utilizing one-dimensional photonic crystals for multi-band operation. The TE 0 modes in the 1550/2000nm wave band are suppressed by carefully selecting the pitch lengths of the nanoholes, leveraging the bandgap of the nanohole array. Conversely, the TM 0 modes remain almost unaffected. The TM-pass polarizer employs a single-etched design on a standard 220 nm SOI platform and has a compact length of ∼ 17.9 µm. The simulated bandwidths (BWs) for polarization extinction ratios (PERs) > 20 dB and > 25 dB are about 210 nm and 195 nm for the 1550 nm wave band, and 265 nm and 240 nm for the 2000nm wave band. Moreover, the insertion losses (ILs) are ∼ 0.5/0.3 dB at wavelengths of 1550/2000nm, respectively. For the fabricated device, the measured BWs for PER > 20 dB and > 25 dB are evaluated to be larger than 100 nm for both 1550/2000nm wave bands. The measured ILs are 1/0.8 dB at wavelengths of 1550/2000nm. This straightforward and compatible design opens possibilities for the development of practical multi-band silicon photonic integrated circuits.

The applications of two-dimensional transition metal carbide/nitride (MXene) in the fields of optoelectronics, sustainable energy, and sensors, among others, have been broadly investigated due to their special electrical, optical, and structural properties. In this Letter, MXene (Ti 3 C 2 T x ) has been firstly, to the best of our knowledge, adopted for the application of a photoacoustic transducer by taking advantage of the photothermal property. The efficiency of the photoacoustic transducer based on a sandwich structure of glass/MXene/polydimethylsiloxane (PDMS) has been experimentally demonstrated to be 1.25 × 10 -2 by converting laser pulses into ultrasonic waves, generating a high acoustic pressure of 15.7 MPa without additional acoustic focusing. That can be explained by the great light absorption and photothermal conversion of the Ti 3 C 2 T x layer.

The paper presents a 170 GHz quasi-optical sub-harmonic mixer with a 3D-printed back-to-back lenses packaging. The quasi-optical mixer is comprised by a pair of antiparallel GaAs Schottky diodes, a patch antenna for receiving local oscillator (LO) pump signal, a symmetric-slit patch antenna for receiving radio frequency (RF) signal, dual 3D-printed lenses and a matching network. The quasi-optical mixer with a pair of antiparallel GaAs Schottky diodes is designed on a multilayer build-up printed circuit board (PCB) utilizing commercially low-cost and high-density interconnect (HDI) technology. The LO and RF antennas are placed on the front and back of the multilayer build-up substrate, respectively, thus significantly simplifying the quasi-optical design. Furthermore, dual 3D-printed lenses placed back-to-back are proposed for LO and RF antennas radiation gain enhancement and mechanical robustness. Additionally, the buried planar reflectors in the substrate maintain effective radiation isolation between the antennas. For facilitating coupling efficiency of signal power into the Schottky diodes and signal isolation between the LO pump signal and RF signal, a compact matching network with low-loss quasi-coaxial via transition structure is integrated in the mixer circuit. The measured single-sideband conversion loss is from 11.3 to 15.4 dB in an operation range of 160 to 180 GHz. The measured radiation patterns agree well with the simulated results.

Self-referenced spectral interferometry with extended time excursion (SRSI-ETE) is a powerful method for single-shot characterization of the temporal contrast of a high peak power laser, which has high temporal resolution but a low dynamic range. Here, a temporal contrast reduction method is proposed that uses the cascaded Kerr lens process in two thin glass plates. Combined with the SRSI-ETE method, the measurement dynamic range of the method is increased about two orders of magnitude while having a 20 fs temporal resolution and a 40 ps time window in single shot.

This Letter presents a 0.4-5.2-µm frequency comb from a compact laser. We designed an integrated fiber device for a figure-9 laser and constructed an all-fiber laser system. The spectrum of the fiber laser was scaled to the broadband region using a chirped periodically poled lithium niobate waveguide. To use this system for gas sensing, a mid-infrared comb with a spectral range of 2.5-5.2 µm and average power of 2.1 mW was divided using an optical filter. The optical part was packaged in a 305 mm × 225 mm × 62 mm box. The comb was stabilized by locking the repetition rate and carrier-envelope offset frequency of the seed source. The system provided an ultrabroadband spectral range from 0.4 to 5.2 µm, which could be applied to spectroscopy, frequency metrology, and optical synthesizers.

Ultrafast microchannel plate (MCP) photomultiplier tubes are under active development. To obtain high gain, high spatial resolution, and good time performance, we comprehensively investigate the effects of the gap distances and voltages from cathode to MCP in and MCP out to anode in a systematic study using the finite integral technique and Monte Carlo method. A three-dimensional model is introduced to simplify the calculations. From the simulation results, a short gap distance and high gap voltage were determined to achieve good time performance, high spatial resolution, and high gain.

The mid-infrared (MIR) region is attracting increasing interest for on-chip synchronous detection and free-space optical (FSO) communications. For such applications, a high-performance electro-optical modulator is a crucial component. In this regard, we propose and investigate a graphene-based electro-absorption modulator (EAM) and microring modulator (MRM) using the suspended germanium waveguide platform. The modulators are designed for the second atmospheric window (8 to 12 µm). The incorporation of double-layer graphene on the suspended slot waveguide structure allows for the significant enhancement of light-graphene interaction, theoretically achieving a 3-dB bandwidth as high as 78 GHz. The EAM shows a calculated modulation depth of 0.022-0.045 dB/µm for the whole operation wavelength range. The MRM exhibits a calculated extinction ratio as high as 68.9 dB and a modulation efficiency of 0.59 V·cm around 9 µm. These modulators hold promise for constructing high-speed FSO communication and on-chip spectroscopic detection systems in the MIR atmospheric window.

To improve the measurement accuracy of interferometer displacement measurement systems, this study analyzes the characteristics of the interference signal to identify sources of nonlinear errors and develops compensation strategies. Specifically, a model is established for the nonlinear errors of the interferometer, which can be attributed to a laser and polarizing beam splitter (PBS). Following that, the dual orthogonal lock-in amplification algorithm is used to separate and compensate for the frequency uncertainty and amplitude errors. Additionally, a real-time compensation algorithm based on ellipse fitting is proposed to compensate for errors caused by the PBS and the uncertainty of amplitude caused by the light source. Experimental results demonstrate that the peak-to-peak value of the compensated nonlinear error is reduced from 11.62 nm to 5.37 nm.

This paper proposes and demonstrates a flexible long-wave infrared snapshot multispectral imaging system consisting of a simple re-imaging system and a pixel-level spectral filter array. A six-band multispectral image in the spectral range of 8-12 µm with full width at half maximum of about 0.7 µm each band is acquired in the experiment. The pixel-level multispectral filter array is placed at the primary imaging plane of the re-imaging system instead of directly encapsulated on the detector chip, which diminishes the complexity of pixel-level chip packaging. Furthermore, the proposed method possesses the merit of flexible functions switching between multispectral imaging and intensity imaging by plugging and unplugging the pixel-level spectral filter array. Our approach could be viable for various practical long-wave infrared detection applications.

Mode-group-division multiplexing (MGDM)-based intensity modulation direct detection (IM/DD) transmission is an attractive approach to increase the capacity for short-reach optical communication. In this Letter, a simple but versatile scheme of mode group (MG) filtering for MGDM IM/DD transmission is proposed. The scheme is applicable to any mode basis in the fiber, and it satisfies the needs of low complexity, low power consumption, and high system performance. By employing the proposed MG filter scheme, a total raw bit rate of a 152-Gb/s multiple-input-multiple-output (MIMO)-free IM/DD co-channel simultaneous transmit and receive system based on two orbital angular momentum (OAM) MGs, each carrying a 38-GBaud four-level pulse amplitude modulation (PAM-4) signal, is experimentally demonstrated over a 5-km few-mode fiber (FMF). The bit error ratios (BERs) of the two MGs are below the 7% hard-decision forward error correction (HD-FEC) BER threshold at 3.8×10 -3 , using simple feedforward equalization (FFE). Furthermore, the dependability and robustness of such MGDM links are of great significance. Thus, the dynamic evaluation of BER and signal-to-noise ratio (SNR) for each MG is tested over 210 minutes under different conditions. In the dynamic cases, all the BER results using the proposed scheme can be below 1×10 -3 , which further confirms the stability and feasibility of our proposed MGDM transmission scheme.

This publisher's note contains corrections to Opt. Lett.48, 2595 (2023).10.1364/OL.488924.

Chromatic dispersion (CD) is always an obstacle to C-band high-speed intensity modulation and direct detection (IM/DD) transmissions, especially with a fiber reach of > 20 km. To reach beyond net-100-Gb/s IM/DD transmission over 50-km standard single mode fiber (SSMF), we for the first time present a CD-aware probabilistically shaped four-ary pulse amplitude modulation (PS-PAM-4) signal transmission scheme with a FIR-filter-based pre-electronic dispersion compensation (FIR-EDC) for C-band IM/DD transmission system. With the help of the FIR-EDC at the transmitter, 100-GBaud PS-PAM-4 signal transmission at 150-Gb/s line rate and 115.2-Gb/s net rate over 50-km SSMF is realized with only feed-forward equalization (FFE) at the receiver side. The superiority of the CD-aware PS-PAM-4 signal transmission scheme over other benchmark schemes has been successfully verified by experiments. Experimental results show that 24.5% improvement of system capacity is obtained by the FIR-EDC-based PS-PAM-4 signal transmission scheme in comparison to the FIR-EDC-based on-off keying (OOK) signal transmission scheme. Compared with the FIR-EDC-based uniform PAM-4 signal transmission scheme or the PS-PAM-4 signal transmission scheme without EDC, the capacity improvement obtained by the FIR-EDC-based PS-PAM-4 signal transmission scheme becomes more profound. The results show the potential and feasibility of such CD-aware PS-PAM-4 signal transmission scheme applied in CD-constrained IM/DD datacenter interconnects.

Holography is an advanced imaging technology where image information can be reconstructed without a lens. Recently, multiplexing techniques have been widely adapted to realize multiple holographic images or functionalities in a meta-hologram. In this work, a reflective four-channel meta-hologram is proposed to further increase the channel capacity by simultaneously implementing frequency and polarization multiplexing. Compared to the single multiplexing technique, the number of channels achieves a multiplicative growth of the two multiplexing techniques, as well as allowing meta-devices to possess cryptographic characteristics. Specifically, spin-selective functionalities for circular polarizations can be achieved at lower frequency, while different functionalities can be obtained at higher frequency under different linearly polarized incidences. As an illustrative example, a four-channel joint-polarization-frequency-multiplexing meta-hologram is designed, fabricated, and characterized. The measured results agree well with the numerically calculated and full-wave simulated ones, which provides the proposed method with great potential in numerous opportunities such as multi-channel imaging and information encryption technology.

A receive-diversity-aided power-fading compensation (RDA-PFC) scheme is proposed and demonstrated to eliminate the chromatic dispersion (CD)-induced power fading for C-band double-sideband (DSB) intensity modulation and direct detection (IM/DD) orthogonal frequency division multiplexing (OFDM) systems. By combining the responses before and after a dispersive element using a maximal-ratio combining (MRC) algorithm, the CD-induced power fading dips within the signal bandwidth of around 50 GHz can be effectively compensated for, which results in an up to 17.6-dB signal-to-noise ratio (SNR) improvement for the fading subcarriers after transmission over 10 km of standard single-mode fiber (SSMF). Using the 16 quadrature amplitude modulation (QAM) format, a diversity receiver with the proposed RDA-PFC scheme can support 170.6-Gbit/s OFDM signal transmission over a 10-km SSMF and reduces the bit error rate (BER) by more than an order of magnitude compared with a conventional receiver. Moreover, 208.1-Gbit/s adaptive bit and power loading OFDM signal transmission over a 10-km SSMF is realized by the proposed RDA-PFC scheme, which improves the capacity by 15.3% compared with the case without RDA-PFC at a BER of 3.8 × 10 -3 . The proposed RDA-PFC scheme shows great potential in CD-induced power-fading compensation for high-speed IM/DD OFDM systems.

Phase-insensitive amplifiers (PIAs), as a class of important quantum devices, have found significant applications in the subtle manipulation of multiple quantum correlation and multipartite quantum entanglement. Gain is a very important parameter for quantifying the performance of a PIA. Its absolute value can be defined as the ratio of the output light beam power to the input light beam power, while its estimation precision has not been extensively investigated yet. Therefore, in this work, we theoretically study the estimation precision from the vacuum two-mode squeezed state (TMSS), the estimation precision of the coherent state, and the bright TMSS scenario, which has the following two advantages: it has more probe photons than the vacuum TMSS and higher estimation precision than the coherent state. The advantage in terms of estimation precision of the bright TMSS compared with the coherent state is researched. We first simulate the effect of noise from another PIA with gain M on the estimation precision of the bright TMSS, and we find that a scheme in which the PIA is placed in the auxiliary light beam path is more robust than two other schemes. Then, a fictitious beam splitter with transmission T is used to simulate the noise effects of propagation loss and imperfect detection, and the results show that a scheme in which the fictitious beam splitter is placed before the original PIA in the probe light beam path is the most robust. Finally, optimal intensity difference measurement is confirmed to be an accessible experimental technique to saturate estimation precision of the bright TMSS. Therefore, our present study opens a new avenue for quantum metrology based on PIAs.

Pixelated filter arrays of Fabry-Perot (FP) cavities are widely integrated with photodetectors to achieve a WYSIWYG ("what you see is what you get") on-chip spectral measurements. However, FP-filter-based spectral sensors typically have a trade-off between their spectral resolution and working bandwidth due to design limitations of conventional metal or dielectric multilayer microcavities. Here, we propose a new idea of integrated color filter arrays (CFAs) consisting of multilayer metal-dielectric-mirror FP microcavities that, enable a hyperspectral resolution over an extended visible bandwidth (∼300 nm). By introducing another two dielectric layers on the metallic film, the broadband reflectance of the FP-cavity mirror was greatly enhanced, accompanied by as-flat-as-possible reflection-phase dispersion. This resulted in balanced spectral resolution (∼10 nm) and spectral bandwidth from 450 nm to 750 nm. In the experiment, we used a one-step rapid manufacturing process by using grayscale e-beam lithography. A 16-channel (4 × 4) CFA was fabricated and demonstrated on-chip spectral imaging with a CMOS sensor and an impressive identification capability. Our results provide an attractive method for developing high-performance spectral sensors and have potential commercial applications by extending the utility of low-cost manufacturing process.

A probabilistic shaping (PS) quadrature amplitude modulation (QAM) based on Y-00 quantum noise stream cipher (QNSC) has been proposed. We experimentally demonstrated this scheme with data rate of 201.6Gbit/s over a 1200-km standard single mode fiber (SSMF) under a 20% SD-FEC threshold. Accounting for the 20% FEC and 6.25% pilot overhead, the achieved net data rate is ∼160Gbit/s. In the proposed scheme, a mathematical cipher (Y-00 protocol) is utilized to convert the original low-order modulation PS-16 (2 2  × 2 2 ) QAM into ultra-dense high-order modulation PS-65536 (2 8  × 2 8 ) QAM. Then, the physical randomness of quantum (shot) noise at photodetection and amplified spontaneous emission (ASE) noise from optical amplifiers are employed to mask the encrypted ultra-dense high-order signal for further improving the security. We further analyze the security performance by two metrics known in the reported QNSC systems, namely the number of masked signals (NMS) of noise and the detection failure probability (DFP). Experimental results show it is difficult or even impossible to extract transmission signals from quantum or ASE noise for an eavesdropper (Eve). We believe that the proposed PS-QAM/QNSC secure transmission scheme has the potential to be compatible with existing high-speed long-distance optical fiber communication systems.

In this paper, a spatial static polarization modulation interference spectrum technique is proposed, which combines polarimetric spectral intensity modulation (PSIM) technology and spatial heterodyne spectroscopy (SHS), and can obtain the total Stokes parameters of the target light simultaneously. Moreover, there are no moving parts or electronically controlled modulation parts. In this paper, the mathematical model of the modulation process and demodulation process of spatial static polarization modulation interference spectroscopy is deduced, a computer simulation is carried out, the principle prototype is developed, and a verification experiment is carried out. Simulation and experimental results show that the combination of PSIM and SHS can achieve high-precision static synchronous measurement of high spectral resolution, high time resolution, and continuous band complete polarization information.

Computational hyperspectral cameras with broadband encoded filter arrays enable high precision spectrum reconstruction with only a few filters. However, these types of hyperspectral cameras have limited application, because it is difficult for conventional encoded filter arrays to balance among the spectrum regulation capacity, angle insensitivity, and processibility. This Letter presents a new, to the best of our knowledge, encoded filter composed of superposition Fabry-Perot resonance cavity (SFP) that can simultaneously take all three aspects into consideration. By learning the parameters of an SFP encoder and a neural network decoder in an end-to-end manner, a computational hyperspectral camera based on an SFP filter array presents up to 2.24 times higher spectral reconstruction accuracy, 10 times wider working angle, and can be produced with a low-cost manufacturing process.

Phase-gradient metasurfaces are two-dimensional (2D) optical elements that can manipulate light by imposing local, space-variant phase changes on an incident electromagnetic wave. These metasurfaces hold the potential and the promise to revolutionize photonics by providing ultrathin alternatives for a wide range of common optical elements such as bulky refractive optics, waveplates, polarizers, and axicons. However, the fabrication of state-of-the-art metasurfaces typically requires some time-consuming, expensive, and possibly hazardous processing steps. To overcome these limitations on conventional metasurface fabrication, a facile methodology to produce phase-gradient metasurfaces through one-step UV-curable resin printing is developed by our research group. The method dramatically reduces the required processing time and cost, as well as eliminates safety hazards. As a proof-of-concept, the advantages of the method are clearly demonstrated via a rapid reproduction of high-performance metalenses based on the Pancharatnam-Berry phase gradient concept in the visible spectrum.

We propose and demonstrate a high-efficiency silicon microring modulator for next-generation optical transmitters operating at line rates above 300 Gb/s. The modulator supports high-order PAM-8 modulation up to 110 Gbaud (330 Gb/s), with a driving voltage of 1.8 V pp . The small driving voltage and device capacitance yields a dynamic energy consumption of 3.1 fJ/bit. Using the modulator, we compare PAM-8 with ultrahigh baud rate PAM-4 of up to 130 Gbaud (260 Gb/s) and show PAM-8 is better suited for 300-Gb/s lane rate operation in bandwidth-constrained short-reach systems.

Plasmonic nanocavities have emerged as a promising platform for next-generation spectroscopy, sensing and photonic quantum information processing technologies, benefiting from a unique confluence of nanoscale compactness and integrability, ultrafast functionality and room-temperature viability. Harnessing their unprecedented optical field confinement and enhancement properties for such diverse application domains, however, demands continued innovation in cavity design and robust strategies for engineering their plasmonic mode characteristics, with the aim of optimizing spatial and spectral matching conditions for strong light-matter interaction involving embedded quantum emitters. Adopting the canonical gold bowtie nanoantenna, we show that the complex refractive index, n + ik, of the substrate material provides additional design flexibility in tailoring the properties of plasmonic nanocavity modes, including their resonance wavelengths, hotspot locations, intracavity field polarization and radiative decay rates. In particular, we predict that highly refractive (n ≥ 4) or highly absorptive (k ≥ 4) substrates provide two complementary approaches to engineering nanocavity modes that are especially desirable for coupling two-dimensional quantum materials, featuring namely an elevated hotspot with a dominantly in-plane polarized near-field, as well as a strongly radiative character. Our study elucidates the benefits and intricacies of a largely unexplored facet of nanocavity mode manipulation, beyond the widely practiced synthetic control over the cavity topology or physical dimensions, and paves the way for plasmonic cavity quantum electrodynamics with two-dimensional excitonic matter.

In this study, a twisted correlated optical beam with a dark hollow center in its average intensity is synthesized by correlated correlation perturbation and incoherent mode superposition. This new hollow beam has a topological charge (TC) mode with a zero value compared with a coherence vortex that has a TC mode with a nonzero value. We transform the twisted correlated beam from solid centered to dark hollow centered by constructing a correlation between the twist factor and the spot structure parameter. Theoretical and experimental results show that twist correlation makes the random optical beam an asymmetric orbital angular momentum spectral distribution and a tunable intensity center. Controlling the correlation parameters can make the focal spot of the twisted beam a dark core when the dominant mode of the TC is still zero. The new nontrivial beams and their proposed generation method provide important technical preparations for the optical particle manipulation with low coherence environment.

In this paper, to separate and compensate the nonlinear error in the grating interferometer, we analyze the source and generation mechanism of this error, deduce the nonlinear error model of the measured signal and the calculated phase signal, and study the characteristics of the established nonlinear error model. The reason why the frequency multiples of ideal phase signals and higher-order nonlinear errors caused by ghost reflections and angular errors of the laser's z-axis are not integers is explained. Then, a nonlinear error separation and compensation method based on cross-correlation coefficient is proposed. Experiments show that the frequency multiplier relationship between the high-order nonlinear error and the ideal interference signal is close to but not equal to 3-fold. The peak-to-peak value of the compensated nonlinear error is reduced from 17.40 nm to 7.05 nm.

Metasurfaces with complex-amplitude modulation are superior in power regulation and hologram imaging resolution compared with those with phase-only modulation. Nevertheless, a single-cell metasurface with multi-band independent phase and amplitude controls is still a great challenge for the circularly polarized incidences. In this work, we propose and design a single-substrate-layer single-cell metasurface with independent complex-amplitude modulations at two discrete frequencies. Based on this emerging technique, a bi-spectral meta-hologram is designed and verified by both full-wave simulations and experiments, which could reconstruct two Chinese characters at the imaging plane at two frequencies. The proposed method shows great potential in multifunctional meta-devices with enhanced performance.

In C-band intensity modulation and direct detection (IM/DD) systems, the frequency-dependent power fading induced by chromatic dispersion (CD) and square-law detection limits the transmission capacity and distance, especially for beyond 100-Gb/s transmissions over a 100-km dispersion-uncompensated link. To reach this goal, we propose a scheme of nonlinear pre-distortion, novel, to the best of our knowledge, combined pulse shaping, and post nonlinear equalization for four-level pulse amplitude modulation (PAM-4)-based IM/DD systems. At the transmitter, the nonlinear pre-distortion is used to generate unequally spaced PAM-4 symbols for pre-compensating the nonlinearities. While the novel pulse shaping, simply shaped by the linear combination of two inter-symbol interference (ISI)-free pulses, alters the frequency-domain power distribution of the PAM-4 signal and results in performance improvement. At the receiver, low-complexity post nonlinear equalization using an absolute-term based nonlinear equalizer with weight sharing (AT-NLE-WS) is performed to eliminate CD-induced power fading and residual nonlinear impairments. With the cooperation of these techniques, record 120-Gb/s PAM-4 signals are successfully transmitted over a 100-km standard single-mode fiber (SSMF) with the measured bit error ratio (BER) below 3.8 × 10 -3 , achieving >9% improvement of system capacity in comparison with the conventional pulse shaping schemes.

To cope with the nonlinear distortions and the chromatic dispersion (CD) induced power fading in double-side band (DSB) intensity modulation and direct detection (IM/DD) transmission systems, high-performance Volterra nonlinear equalizers (VNLEs) including Volterra feed-forward equalizer (VFFE) and Volterra decision-feedback equalizer (VDFE) are widely applied. However, the conventional VNLEs have high computational complexity, especially for longer memory lengths. In this paper, based on sparse and weight-sharing strategies for significant kernel reduction, we propose four low-complexity NLEs including a sparse diagonally pruned VDFE (S-DP-VDFE), a sparse diagonally pruned absolute-term DFE (S-DP-ATDFE), a weight-sharing DP-VDFE (WS-DP-VDFE), and a weight-sharing DP-ATDFE (WS-DP-ATDFE), and present a comprehensive comparison among them in terms of computational complexity and bit error ratio (BER) performance in a C-band 100-Gbit/s PAM-4 transmission system over 60-km standard single-mode fiber (SSMF). The experimental results show that the proposed S-DP-VDFE and WS-DP-VDFE not only exhibit comparable performance with the conventional DP-VDFE but also reduce the complexity by 54.5% and 45.9%, respectively. While the proposed S-DP-ATDFE and WS-DP-ATDFE yield lower complexity at the expense of a slight performance degradation. Compared with the proposed S-DP-VDFE, S-DP-ATDFE, and WS-DP-VDFE, the proposed WS-DP-ATDFE with the lowest number of real-valued multiplications of 45 achieves up to 90.9%, 81.6%, and 95.8% complexity reduction, respectively, at the 7% hard-decision forward error correction (HD-FEC) BER limit of 3.8 × 10 -3 . The proposed low-complexity WS-DP-ATDFE shows great potential in low-cost and high-performance IM/DD optical transmission systems.

Complex amplitude modulation metasurfaces (CAMM) that can independently control both amplitude and phase have fostered a broad research interest worldwide due to its more robust wave manipulation capability than metasurfaces that can only adjust phase. Although many CAMM structures have been reported, they still suffer from limitations such as low transmittance, complicated structure, polarization dependence, high cost, and difficulty in fabrication. This work proposes a high-transmission polarization-independent CAMM operating in an ultra-wide millimeter-wave frequency range from 30 to 50 GHz realized by cost-effective and easily implementable manners. Three CAMMs are designed to generate complicated millimeter-wave beams like holographic imaging beam, Airy beam, and vortex knot beam. The presented simulation and experimental results clearly demonstrate the effectiveness of the CAMMs. This work presents a new paradigm for CAMM that can be readily extended to other frequency bands. It may also advance further applications of millimeter-wave beams in communication, imaging and detection.

A metalens made of compact planar metastructure exhibits an excellent capability of focusing. The high-quality transmissive and reflective focusing simultaneously provides Fourier transform (FT) operation for optical information processing. Here we show a transflective on-chip metalens (TOM) made of orthogonal nano-grooves (ONGs). The TOM simultaneously converges transmitted and reflected (T&R) waves to the designed focal points. By adjusting the phase gradient profiles provided by the ONGs, the focal lengths of the T&R in-plane waves can be independently tuned. Our simulations show that the TOM possesses the advantages of broadband (>400 nm bandwidth) and high-focusing-efficiency (∼60%) dual-focusing capability. Further, we utilize the TOM to build a one-to-two 4-f optical system. Two different spatial filtering operations based on FT can be simultaneously implemented in axial transmission and off-axis reflection channels for one input signal. We expect that the dual-focusing metalens approach can realize parallel optical processing in on-chip optical computing, spatial filtering, and beyond.

Optical differentiation shows much potential to be applied in computation due to its strong parallelizability. Currently, each optical differential method can only obtain partial differential information. Here, we propose a general approach to obtain complete differentiation. Compared to previous methods, we can separately obtain the differentiation of amplitude and phase, reserve the negative value of the differentiation, and acquire the differentiation in arbitrary directions of the two-dimensional field. We measure the differentiation of the Gaussian beam to demonstrate this method. A practical experiment of identifying the move direction of the motion-blurred image is also presented to verify the practicability of our method. Our method can further be applied to intelligence algorithms, image identification, and optical analog computing.

In underwater images, the significant sources of distortion are light attenuation and scattering. Existing underwater image restoration technologies cannot deal with the poor contrast and color distortion bias of underwater images. This work provides a new underwater image restoration approach relying on depth map optimization and background light (BL) estimation. First, we build a robust BL estimation model that relies on the prior features of blurriness, smoothness, and the difference between the intensity of the red and blue-green channels. Second, the red-light intensity, difference between light and dark channels, and disparity of red and green-blue channels by considering the hue are used to calculate the depth map. Then, the effect of artificial light sources on the underwater image is removed using the adjusted reversed saturation map. Both the subjective and objective experimental results reveal that the images produced by the proposed technology provide more remarkable visibility and superior color fidelity.

Modulation format identification (MFI) is a critical technology for autonomous digital coherent receivers in next-generation elastic optical networks. A novel and simple MFI scheme, to the best of our knowledge, based on signal envelope flatness is proposed without requiring any training or other prior information. After amplitude normalization and partition, the incoming polarization division multiplexed (PDM) signals can be classified into quadrature phase shift keying (QPSK), 8 quadrature amplitude modulation (QAM), 16QAM, and 64QAM signals according to envelope flatnesses R 1 , R 2 , and R 3 of signals in different amplitude ranges. The feasibility of the proposed MFI scheme is first verified via numerical simulations with 28 GBaud PDM-QPSK/-8QAM/-16QAM/-64QAM signals. Only by using 4000 symbols can the proposed MFI scheme achieve a 100% correct identification rate for the four modulation formats over a wide optical signal-to-noise ratio (OSNR) range. Proof-of-concept experiments among 28 GBaud PDM-QPSK/-8QAM/-16QAM systems under back-to-back and long-haul fiber transmission links are implemented to further demonstrate the effectiveness of the proposed MFI scheme. The experimental results show that the proposed MFI scheme can obtain a 100% correct identification rate when the OSNR value of each modulation format is higher than the threshold corresponding to 7% FEC and is resilient towards fiber nonlinearities. More importantly, the proposed MFI scheme can significantly reduce computational complexity.

A nonlinearity-aware signal transmission scheme based on a low-complexity 3rd-order diagonally pruned absolute-term nonlinear equalizer (NLE) with weight sharing (DP-AT-NLE-WS) and rate-adaptable probabilistically shaped 16-level pulse amplitude modulation (PS-PAM-16) signal is proposed and experimentally demonstrated for C-band net-300-Gbit/s/λ short-reach optical interconnects. By replacing the multiplication operation with the absolute operation and applying weight sharing to reduce the kernel redundancy, the computational complexity of the proposed 3rd-order DP-AT-NLE-WS is reduced by >40% compared with the 3rd-order DP-Volterra NLE (DP-VNLE), DP-AT-NLE, and DP-VNLE-WS, with the achieved normalized general mutual information (NGMI) above a threshold of 0.857. Employing a commercial 32-GHz Mach-Zehnder modulator (MZM) and a single digital-to-analog converter (DAC), we demonstrate the single-lane transmission of 100-GBaud PS-PAM-16 signal using DP-AT-NLE-WS in the C band at record 370-Gbit/s line rate and 300.4-Gbit/s net rate over 1-km standard single-mode fiber (SSMF), achieving 21.2% (15.5%) capacity improvement over 100 (105)-GBaud PAM-8 transmission. To the best of our knowledge, this is the first net-300-Gbit/s intensity modulation and direct detection (IM/DD) short-reach transmission in the C band using commercially available components.

A very-high-bandwidth integrated silicon microring modulator (MRM) designed on a commercial silicon photonics (SiP) platform for C-band operation is presented. The MRM has a 3 dB electro-optic (EO) bandwidth of over 67 GHz and features a small footprint of 24 µm × 70 µm. Using the MRM, we demonstrate intensity modulation-direct detection (IM-DD) transmission with 4-level pulse amplitude modulation (PAM-4)  signaling of over 100 Gbaud. By utilizing the optical peaking effect and negative chirp in the MRM, we extend the transmission distance, which is limited by the fiber-dispersion-induced frequency fading. Using a standard single-mode fiber (SSMF) for transmission across distances of up to 2 km, we measured the data transmission of 100 Gbaud PAM-4 signals with a bit error rate (BER) under the general 7% hard-decision forward-error correction (HD-FEC) threshold. The MRM enables an extended transmission distance for 100 Gbaud signaling in the C-band without dispersion compensation.

Visible-infrared compatible camouflage is significant to enhance the equipment survivability through counteracting the modern detecting and surveillance systems. However, there are still great challenges in simultaneously achieving multispectral camouflage with high transmittance in visible, low emissivity in the atmospheric windows and high emissivity in the non-atmospheric window, which can be attributed to the mutual influence and restriction within these characteristics. Here, we proposed an optically transparent infrared selective emitter (OTISE) composed of three Ag-ZnO-Ag disk sub-cells with anti-reflection layers, which can synchronously improve the visible transmittance and widen absorption bandwidth in the non-atmospheric window by enhancing and merging resonance response of multi-resonators. Test results reveal that low emissivity in infrared atmospheric windows, high emissivity in the 5-8 µm non-atmospheric window and high optical transparency have been obtained. In addition, the radiative flux of OTISE in 3-5 µm and 8-14 µm are respectively 34.2% and 9.3% of that of blackbody and the energy dissipation of OTISE is 117% of that of chromium film. Meanwhile, it keeps good optical transparency due to the ultrathin Ag film. This work provides a novel strategy to design the optically transparent selective emissive materials, implying a promising application potential in visible and infrared camouflage technology.