Search

A Bragg labeled wavelength (BLW) employed to the sensitivity calibration in an interference pattern has been proposed and experimentally demonstrated. According to the critical condition of Fabry-Perot (FP) interference and the antiresonant (AR) effect, the length of hollow core fiber (HCF) is artificially controlled to form a FP microcavity by collapsed fusion splicing. Dual-spectral features of the BLW and inline multimode interference (IMMI) dominate the transmission spectrum of the collapsed Bragg HCF (BHCF). The location of the BLW remains unchanged once the air-core diameter is selected. Sensing performance is investigated to validate the calibration function of the proposed BHCF. In particular, the temperature sensitivity of the BLW and multimode interference are 12.8 pm/°C and 87.1 pm/°C, respectively, corresponding to the reference sensitivity induced by the Bragg structure and the measurement sensitivity of the IMMI. All these findings highlight the calibration of HCF-based interferometric sensors in practical applications.

Recent progress in designing optimized microstructured optical fiber spreads an application scenario of optical fiber sensing. Here, we investigate the bending measurement based on a specially designed hollow core photonic crystal fiber (HC-PCF). Numerical simulation indicates that the bending sensitivity is mainly determined by the diameter of the hollow core and also depends on the coupled modes. Experimentally, a direction-independent bending sensor is fabricated by sandwiching a segment of specially designed HC-PCF into two segments of single mode fibers. The bending sensitivity of our device is improved 10 times by increasing the diameter of the hollow core. Bending measurement is validated at two orthogonal planes. The maximum sensitivity up to 2.8 nm/deg is obtained at 14° bending angle. Additionally, a low thermal sensitivity of 2.5 pm/°C is observed from 18°C to 1000°C. The sensor is robust, easy to fabricate and cost effective, which is promising in the field of small-angle bending measurement under a large temperature range.

In this work we demonstrate a low-frequency acoustic sensor structure based on extrinsic Fabry-Pérot interferometer (EFPI) cavity. The cavity is fabricated through micromachining techniques in a square silicon substrate with 4 mm side length and 400 μm thickness, which gives the sensor relative compact size. In the assembling process of the lead-in fiber, a D-shaped ceramic ferrule is designed to achieve the open cavity structure, which can balance the environmental pressure inside and outside the cavity and thus giving the sensor potentials of resisting strong pressure variations in some harsh application environments. Experimentally, sensor response to low-frequency acoustic waves from 0.1 Hz to 250 Hz is measured and demonstrated. A flat response region between 0.5 Hz to 250 Hz with sensitivity fluctuation of 0.8 dB is realized. Pressure resistant test of 25 MPa is also conducted on the sensor and exhibited to prove the function of the open cavity structure.

An ultra-wideband fiber optic acoustic sensor based on graphene diaphragm with a thickness of 10nm has been proposed and experimentally demonstrated. The two reflectors of the extrinsic Fabry-Perot interferometer is consist of fiber endface and graphene diaphragm, and the cavity is like a horn-shape. The radius of the effective area of the ultrathin graphene diaphragm is 1mm. Attributed to the strong van der Waals force between the diaphragm and the ceramic ferrule, the sensor head can be applied not only in the air but also underwater. Experimental results illustrate that ultra-wideband frequency response is from 5Hz to 0.8MHz, covering the range from infrasound to ultrasound. The noise-limited minimum detectable pressure level of 0.77Pa/Hz 1/2 @5Hz and 33.97μPa/Hz 1/2 @10kHz can be achieved, and the applied sound pressure is 114dB and 65.8dB, respectively. The fiber optic acoustic sensor may have a great potential in seismic wave monitoring, photoacoustic spectroscopy and photoacoustic imaging application due to its compact structure, simple manufacturing, and low cost.

In this paper, a high resolution and large dynamic range fiber optic temperature sensor without measurement crosstalk has been proposed. Two combinational mechanisms of anti-resonant reflecting optical waveguide and inline Mach-Zehnder interference structure are integrated in single hole twin eccentric cores fiber. The dual-effect composite spectrum is consist of several dominant resonant wavelengths and comb pattern, which are corresponding to the two above-mentioned mechanisms. Gauss fit and fast Fourier transform filtering are used for extracting the resonant wavelengths and comb spectrum, respectively. Accordingly, the temperature sensitivity of 42.18pm/°C and 2.057nm/°C are achieved by tracking the coherent decrease point. The lower sensitivity can guarantee a large dynamic range, while the higher one will contribute to the enhanced resolution. Therefore, the temperature monitoring is the combination of large dynamic range and enhanced resolution. Moreover, the size of the ultracompact sensor is only 950μm, which has a great potential for engineering applications.

In this paper, a novel sensitivity amplification method for fiber-optic in-line Mach-Zehnder interferometer (MZI) sensors has been proposed and demonstrated. The sensitivity magnification is achieved through a modified Vernier-effect. Two cascaded in-line MZIs based on offset splicing of single mode fiber (SMF) have been used to verify the effect of sensitivity amplification. Vernier-effect is generated due to the small free spectral range (FSR) difference between the cascaded in-line MZIs. Frequency component corresponding to the envelope of the superimposed spectrum is extracted to take Inverse Fast Fourier Transform (IFFT). Thus we can obtain the envelope precisely from the messy superimposed spectrum. Experimental results show that a maximum sensitivity amplification factor of nearly 9 is realized. The proposed sensitivity amplification method is universal for the vast majority of in-line MZIs.

A novel scheme is proposed to mitigate the atmospheric turbulence effect in free space optical (FSO) communication employing orbital angular momentum (OAM) multiplexing. In this scheme, the Gaussian beam is used as an auxiliary light with a common-path to obtain the distortion information caused by atmospheric turbulence. After turbulence, the heterodyne coherent detection technology is demonstrated to realize the turbulence mitigation. With the same turbulence distortion, the OAM beams and the Gaussian beam are respectively utilized as the signal light and the local oscillation light. Then the turbulence distortion is counteracted to a large extent. Meanwhile, a phase matching method is proposed to select the specific OAM mode. The discrimination between the neighboring OAM modes is obviously improved by detecting the output photocurrent. Moreover, two methods of beam size adjustment have been analyzed to achieve better performance for turbulence mitigation. Numerical results show that the system bit error rate (BER) can reach 10 -5 under strong turbulence in simulation situation.

A demodulation method for interferometric fiber sensors (IFSs) is proposed in this article. The phase variation induced by the measurands can be estimated by calculating the Fourier phase at the intrinsic spatial frequencies of the fiber sensor. Theoretical analysis of the demodulation method is discussed in detail. Numerical simulations are put forward to demonstrate the consistency of the demodulation results under different wavelength sampling interval and noise level, showing a better stability compared with the conventional peak wavelength tracking technique. The proposed method is also experimentally demonstrated by an inline multimode interferometer based on a single-mode fiber (SMF) offset-splicing structure. Experimental results indicate that the phase response of different cladding modes can be analyzed simultaneously. Simultaneous measurement of strain and temperature is realized in our confirmatory experiment by analyzing the phase sensitivities of two selected cladding modes.

We report and demonstrate a highly-sensitive refractive index (RI) sensor based on a linear-cavity dual-wavelength erbium-doped fiber laser (DWEDFL). The optical spectrum of the laser varies as the external environmental RI changes from 1.3 to 1.335. The DWEDFL has a linear-cavity configuration with two fiber Bragg gratings (FBGs) with central wavelengths < 1 nm apart. Since both FBGs share the same EDF gain medium, gain competition occurs in the cavity. Optical loss of one wavelength can be introduced by immersing the sensing component, a 15 mm micro-fiber (MF), in a solution under test. Experimental results demonstrate a high sensitivity of -231.1 dB/RIU (refractive index unit) and 42.6 dB/RIU in the range from 1.300 to 1.335. The relative power change at the two FBG wavelengths reveals a higher sensitivity of -273.7 dB/RIU with better stability due to reduced light source jitter and external perturbation. Due to its high sensitivity and simple structure, the dual wavelengths gain competition RI sensor has potential applications in chemical and biochemical sensing fields.

A novel fiber curvature sensor without temperature cross interference based on a single hole twin eccentric core fiber has been proposed. Anti-resonant mechanism combined with inline Mach-Zehnder interference (MZI) structure are applied to the measurands detection. The spectrum is composed of a comb spectrum caused by the inline MZI and several dominant resonant wavelengths induced by anti-resonant effect. The curvature sensitivity of -1.54dB/m -1 can be achieved by intensity demodulation of the selected dip of Gaussian fitting. Similarly, the temperature sensitivity of 70.71pm/°C and 34.17pm/°C are respectively achieved by tracking coherent decrease point obtained by the FFT band pass filter method and Gaussian fit dip. Consequently, a relatively higher resolution of temperature measurement can be realized by the two methods mentioned above. The proposed sensor has a great potential for structural health monitoring, such as buildings, towers, bridges, and many other infrastructures due to its compact structure, easy fabrication and without cross impacts.

In this article, we propose an interrogation method of fiber acoustic sensor to recover the time-domain signal from the sensor spectrum. The optical spectrum of the sensor will show a ripple waveform when responding to acoustic signal due to the scanning process in a certain wavelength range. The reason behind this phenomenon is the dynamic variation of the sensor spectrum while the intensity of different wavelength is acquired at different time in a scanning period. The frequency components can be extracted from the ripple spectrum assisted by the wavelength scanning speed. The signal is able to be recovered by differential between the ripple spectrum and its self-fitted curve. The differential process can eliminate the interference caused by environmental perturbations such as temperature or refractive index (RI), etc. The proposed method is appropriate for fiber acoustic sensors based on gratings or interferometers. A long period grating (LPG) is adopted as an acoustic sensor head to prove the feasibility of the interrogation method in experiment. The ability to compensate the environmental fluctuations is also demonstrated.