Search

Considering the continuous development of ytterbium (Yb)-doped fibers for fiber lasers and amplifiers, thorough characterization of the features and quality of such fibers is necessary now more than ever. In particular, the evaluation of the very strong core attenuation that results from Yb absorption and the losses accompanying photodarkening (PD) processes in Yb-doped optical fibers is still of immense interest. Keeping that in mind, the potential of a method using pinhole fibers will be demonstrated here. Moreover, the investigation of fluorescence properties of Yb3+ is also important; it can be affected by phenomena such as reabsorption, inhomogeneous pump intensity distribution, amplified spontaneous emission, lasing, and, lastly, PD. As these phenomena occur while measuring the fluorescence properties of Yb3+ in optical fibers, they can distort the fluorescence spectra and fluorescence decay significantly. We suggest a twice-perpendicular measurement method and strict time management to avoid these interfering phenomena during the fluorescence measurements.

In contrast to Yb/Al-doped fibers, the influence of very low Tm(2)O(3) concentrations (≥ 0.1 mol-ppm) on photodarkening (PD) is clearly detectable in Yb/P-doped fibers that are known to show little degradation effects. For Tm(2)O(3) additions of more than 50 mol-ppm, the measured PD loss is even similar to Yb/Al-doped fibers with comparable rare earth concentrations. Our work reveals the risk of color center generation by pumping at wavelengths of 915 nm or 976 nm even in Al-free Yb-doped fibers and emphasizes the importance of high purity of raw materials for the preparation of Yb laser fibers with expected very low PD.

We investigated the photodarkening (PD) kinetics of two fiber series with variation of the Yb content for constant Al concentration or constant ratio of Al/Yb, respectively. The results show the outstanding importance of the absolute value of Al concentration also in the case of fibers with strongly reduced Yb content. An Al/Yb ratio of 5 to 6 is not sufficient to mitigate PD loss. Moreover, a model to describe PD loss and rate constant as functions of Yb concentration and excitation is suggested that links measurements of PD in single fibers of the same type (variation of Yb inversion) and in fiber series (constant Yb inversion).

Fabrication, spectroscopic properties, and laser performance of a Yb:SiO(2) multicomponent glass have been investigated in this paper. The glass system composed of SiO(2), Al(2)O(3), and La(2)O(3) excels in terms of a high thermal stress resistance compared to other laser glasses. The laser experiments were conducted with a 3.4 mm thick and 0.9 mol. % Y(2)O(3) doped sample. A maximum slope efficiency of 51%, a maximum optical to optical efficiency of 42%, and a tuning range from 1010-1090 nm was realized. Due to the promising laser properties and a straightforward fabrication technique it may well qualify as an alternative gain medium in high-energy, ultrashort pulse laser systems.

We investigated photodarkening (PD) parameters of Yb/Al-doped silica fibers as a function of the concentration of additional rare earth ions like Tm or Er. It was found that both Tm and Er cause a decrease in Yb inversion followed by a reduction of PD in the case of Er, whereas Tm-codoping with more than 10 mol-ppm can strongly accelerate the process and also increase the PD loss. However, contrary to [1], we conclude that the typical PD behavior of Yb/Al fibers is an intrinsic feature of this fiber type and not caused by trace impurities of Tm (< 1 mol-ppm) unintentionally incorporated by the raw materials during fiber preparation.

We report on the thermal treatment of photodarkened Yb-doped fiber samples. The method of non-isothermal bleaching at different temperature ramp rates can be used to determine the thermal energy distribution of photodarkening induced color centers. A distributed activation energy with a mean value of about 1.3 eV and a FWHM of 0.5 eV was found. Spectral changes during thermal treatment were observed and could be interpreted, e.g. as an enhancement of the absorption cross section.

We studied both numerically and experimentally a birefringence in a microstructure fiber with elliptical inclusion highly doped with GeO(2). We demonstrate that such inclusion increases the phase modal birefringence and modifies its dispersion in the short wavelength range, thus causing that group birefringence crosses zero value at a certain wavelength. Moreover, we numerically analyzed different factors contributing to the overall fiber birefringence, including geometrical birefringence induced by holes distribution and ellipticity of the inclusion as well as stress birefringence associated with thermal shrinkage of the doped glass.

We report on what we believe to be the first demonstration of an erbium-ytterbium-doped multifilament-core (MFC) fiber for single-mode amplification of narrow linewidth high peak power pulses. A master-oscillator-power-fiber-amplifier laser source has been demonstrated using a 37-filament MFC fiber in the last amplification stage. Pulses with 750 microJ (940 W peak power) and laser linewidth<1 MHz have beam generated with M2 approximately 1.3. This value is close to the theoretical value M2 approximately 1.5.

We report on photodarkening (PD) investigations at Yb doped fibers with specific variation of the concentrations of the codopants aluminum and phosphorus, measured during cladding pumping at 915 nm. A core composition with equal content of Al and P is most promising to achieve Yb fibers with low PD, high laser efficiency and low numerical aperture of the laser core despite of high codoping. A laser output power of more than 100 W was demonstrated on such a fiber with a slope efficiency of 72%. The correlation of the PD loss with the NIR-excited cooperative luminescence encourages the supposition that cooperative energy transfer from excited Yb(3+) ions to the atomic defect precursors in the core glass enables the formation of color centers in the pump-induced PD process.

Photodarkening in Yb doped fibers was examined at 633 nm in-situ during cladding pumping at 915 nm with varying pump powers and with no indication of an onset threshold. For the first time, the partial bleaching of the photodarkening loss by the pump power itself was observed. We found the relaxation to well-defined equilibrium states of the core excess loss, depending on the Yb inversion. From the dependence of the measured rate constant on the density of excited Yb ions we conclude, that on average 3 to 4 excited Yb ions create or bleach one color center responsible for the core excess loss.

A new bandwidth measurement technique for a multimode optical fiber (MMF) using a frequency-domain intermodal interferometer is proposed. We have demonstrated that the relative modal delay (RMD) of a MMF can be obtained easily and accurately based on an optical frequency-domain reflectometry (OFDR) technique by using an intermodal interference signal among the excited modes of a MMF. As an example, a photonic crystal fiber with a few modes is prepared and its RMD is measured by using our proposed measurement technique. Measurement results are compared with those from a previously reported frequency-domain method. We have also measured the RMD of a commercial MMF as a practical application and compared our result with the one obtained from a well-known time-domain differential mode delay measurement technique.

We propose new design parameters for index-guiding holey fiber that can provide flexibility in defect and lattice design and adiabatic mode transformation capability. The new defect consists of a central air hole and a germanosilicate ring surrounding it, which results in a large-area annulus mode profile, low splice losses to standard fiber, 0.7 dB at 1.55 microm, and chromatic dispersion with a low slope, 0.002 ps/km nm2.

We report 2 x 2 and 4 x 4 multimode air-clad holey fiber couplers fabricated by a novel fusion and tapering technique. The devices showed excellent port-to-port coupling uniformity over a wide spectral range of 800-1650 nm. The 4 x 4 coupler showed a low insertion loss of 9.9 dB and excess loss of 3.9 dB at 1310 nm. Because of its unique air cladding and the high numerical aperture of the holey fiber structure, the device showed strong potential in high-power applications.

Q-switching of a wavelength tunable Yb3+-doped double-clad fiber laser by a Tm3+-codoping in the gain fiber is demonstrated. This system showed up to 2.4 W output power, up to 140 kHz repetition rate, a maximum pulse energy of 21.8 microJ and a minimum pulse duration of 1.1 micros. Using a grating pair in Littrow-Littman configuration the emission wavelength was tunable between 1055 nm and 1090 nm. The output radiation showed a maximum spectral linewidth of 4 GHz.

We report on a 9.2-W cw, two-times diffraction-limited, neodymium-doped fiber laser operating in the 1.06-microm region. For a silica-based double-clad fiber, slope efficiencies of more than 25% are observed for pumping by a diode-laser system operating near 810 nm.