Search

Rotationally symmetric micro-cavities with disk, ring or toroidal shape displaying whispering gallery modes (WGMs) play an essential role in modern-day photonics. Due to the reduced symmetry of such resonators compared to spheres, an exact analytical model yielding WGMs as solutions does not exist. The established WGM classification scheme based on approximated analytical solutions is generally useful but neglects a possible interaction between the different modes. In this paper, we assess the limitation of the validity of this established classification based on extensive finite element method (FEM) simulations. We investigate respective mode couplings as well as underlying selection rules based on avoided crossings of the modes' resonance wavelengths. We propose conserved mode properties solely based on true symmetries of the underlying refractive-index distribution and deduce a novel WGM classification scheme.

We compare different excitation and collection configurations based on free-space optics and evanescently coupled tapered fibers for both lasing and fluorescence emission from dye-doped doped polymeric whispering gallery mode (WGM) micro-disk lasers. The focus of the comparison is on the lasing threshold and efficiency of light collection. With the aid of optical fibers, we localize the pump energy to the cavity-mode volume and reduce the necessary pump energy to achieve lasing by two orders of magnitude. When using fibers for detection, the collection efficiency is enhanced by four orders of magnitude compared to a free-space read-out perpendicular to the resonator plane. By enhancing the collection efficiency we are able to record a pronounced modulation of the dye fluorescence under continuous wave (cw) pumping conditions evoked by coupling to the WGMs. Alternatively to fibers as a collection tool, we present a read-out technique based on the detection of in-plane radiated light. We show that this method is especially beneficial in an aqueous environment as well as for size-reduced micro-lasers where radiation is strongly pronounced. Furthermore, we show that this technique allows for the assignment of transverse electric (TE) and transverse magnetic (TM) polarization to the observed fundamental modes in a water environment by performing polarization-dependent photoluminescence (PL) spectroscopy. We emphasize the importance of the polarization determination for sensing applications and verify expected differences in the bulk refractive index sensitivity for TE and TM WGMs experimentally.

We demonstrate the realization of 3D whispering-gallery-mode (WGM) microlasers by direct laser writing (DLW) and their replication by nanoimprint lithography using a soft mold technique ("soft NIL"). The combination of DLW as a method for rapid prototyping and soft NIL offers a fast track towards large scale fabrication of 3D passive and active optical components applicable to a wide variety of materials. A performance analysis shows that surface-scattering-limited Q-factors of replicated resonators as high as 1×10 5 at 635 nm can be achieved with this process combination. Lasing in the replicated WGM resonators is demonstrated by the incorporation of laser dyes in the target material. Low lasing thresholds in the order of 15  kW/cm 2 are obtained under ns-pulsed excitation.

Integration of optically active materials into whispering gallery mode (WGM) cavities enables low-threshold laser emission. In contrast to their passive counterparts, the WGMs of these microlasers can be pumped and read out easily via free-space optics. The WGMs interact with the cavity environment via their evanescent field, and thus lend themselves to label-free bio-sensing. The detection limit of such sensors, given as the ratio of the resolution of the whole measurement system to the sensitivity of the WGMs, is an important figure of merit. In this work we show that the detection limit of polymeric microdisk lasers can be improved by more than a factor of seven by optimizing their radius and thickness. We use the bulk refractive index sensitivity, the magnitude of the sensor reaction towards refractive index changes of the bulk environment, to quantify the sensing performance and show that it can be enhanced while the spectral resolution is maintained. Furthermore, we investigate the effect of the size of the cavity on the quality factor and the lasing threshold in an aqueous environment, hence allowing optimization of the cavity size for enhanced sensor performance. For all considered quantities, numerically computed expectations are verified by experimental results.

Lasing from whispering-gallery mode (WGM) resonators occurs omnidirectional in azimuthal plane. Most applications of WGM resonators require spectral analysis with off-chip detectors, where in-plane emission and beam divergence hinder efficient detection. We demonstrate redirecting WGM laser emission from all azimuthal angles using a circular micromirror placed around the cavity. By collecting reflections off the micromirror via free-space optics, read-out intensity improved by one order of magnitude. Blocking vertically emitted spontaneous emission and recording reflections off the micromirror only, signal-to-noise ratio improved from 4.6 dB to 15 dB. Our read-out concept may be applied to arbitrary WGM cavity geometries without deteriorating the cavity's quality factor.

We use polarization-resolved Raman spectroscopy to assess the crystal quality of epitaxial kesterite layers. It is demonstrated for the example of epitaxial Cu₂ZnSnSe₄ layers on GaAs(001) that "standing" and "lying" kesterite unit cell orientations (c'-axis parallel / perpendicular to the growth direction) can be distinguished by the application of Raman tensor analysis. From the appearance of characteristic intensity oscillations when the sample is rotated one can distinguish polycrystalline and epitaxial layers. The method can be transferred to kesterite layers oriented in any crystal direction and can shed light on the growth of such layers in general.

We report on a method for a highly flexible arrangement of polymeric high-Q whispering gallery mode resonators. Parallel on-chip fabricated goblet resonators are detached from the substrate by bonding a gold wire to the field-free center of their polymeric cavity. This enables the precise control of the resonator's spatial position. The modal spectrum of the detached resonator reveals preservation of its high optical quality. Manipulation of the resonators' position allows for designing coupled resonators geometries and tuning the coupling properties dynamically after batch fabrication. The properties of the modal spectrum evidence the successful optical coupling.

We report the fabrication of nanoporous liquid core lasers via direct laser writing based on two-photon absorption in combination with thiolene-chemistry. As gain medium Rhodamine 6G was embedded in the nanoporous polybutadiene matrix. The lasing devices with thresholds of 19 µJ/mm(2) were measured to have bulk refractive index sensitivities of 169 nm/RIU at a laser wavelength of 600 nm, demonstrating strongly increased overlap of the modes with the analyte in comparison to solid state evanescent wave sensors.

We report the fabrication of high-Q polymeric microdisks on silicon via direct laser writing utilizing two-photon absorption induced polymerization. The quality factors of the passive cavities are above 10(6) in the 1300 nm wavelength region. The flexible three-dimensional (3D) lithography method allows for the fabrication of different cavity thicknesses on the same substrate, useful for rapid prototyping of active and passive optical microcavities. Microdisk lasers are realized by doping the resist with dye, resulting in laser emission at visible wavelengths.

We investigate lasing from high-Q, polymeric goblet-type microcavities covered by an organic semiconductor gain layer. We analyze the optical modes in the high-Q cavities using finite element simulations and present a numerical method to determine the cutoff thickness of the gain layer above which the whispering gallery modes are strongly confined in this layer. Fabricated devices show reduced lasing thresholds for increasing gain layer thicknesses, which can be explained by a higher filling factor of the optical modes in the gain layer. Furthermore, reduced lasing threshold is accompanied by a red-shift of the laser emission., (© 2011 Optical Society of America)

We study the lasing dynamics of individual ZnO nanorods by time-resolved mu-photoluminescence. The distinct laser modes show gain competition and pronounced shifts as a function of excitation density. This behavior can be understood in terms of many-particle effects within an inverted electron-hole plasma and of the calculated mode spectra of the particular nanorod, whose geometry is known from electron microscope investigations.