Search

The enhancement of bovine serum albumin (BSA) fluorescence detection using a hierarchical laser-induced periodic surface structure (LIPSS) at the TC4 titanium alloy substrate was experimentally demonstrated. The hierarchical structure, including microgrooves, submicrometer LIPSS, and nanoparticles, has been achieved by a femtosecond laser. Due to the surface plasmon polariton induced by the LIPSS and localized surface plasmon resonance induced by nanoparticles, the enhancement factor of BSA fluorescence detection reached 74. Further, a good linear relationship between the concentration of copper ion inside and BSA fluorescence intensity was found in the range between 5 and 35 μg/mL. Our method explores a simple, reproducible, and pollution-free technique for surface-enhanced fluorescence.

A novel design of decorating microsphere surface with concentric rings to modulate the photonic nanojet (PNJ) is investigated. By introducing the concentric ring structures into the illumination side of the microspheres, a reduction of the full width at half maximum (FWHM) intensity of the PNJ by 29.1%, compared to that without the decoration, can be achieved numerically. Key design parameters, such as ring number and depth, are analyzed. Engineered microsphere with four uniformly distributed rings etched at a depth of 1.2 μm and width of 0.25 μm can generate PNJ at a FWHM of 0.485 λ (λ = 400nm). Experiments were carried out by direct observation of the PNJ with an optical microscope under 405 nm laser illumination. As a result, shrinking of PNJ beam size of 28.0% compared to the case without the rings has been achieved experimentally. Sharp FWHM of this design can be beneficial to micro/nanoscale fabrication, optical super-resolution imaging, and sensing.

Tunable lattice resonances are demonstrated in a hybrid plasmonic crystal incorporating the phase-change material Ge2Sb2Te5 (GST) as a 20-nm-thick layer sandwiched between a gold nanodisk array and a quartz substrate. Non-volatile tuning of lattice resonances over a range Δλ of about 500 nm (1.89 µm to 2.27 µm) is achieved experimentally via intermediate phase states of the GST layer. This work demonstrates the efficacy and ease of resonance tuning via GST in the near infrared, suggesting the possibility to design broadband non-volatile tunable devices for optical modulation, switching, sensing and nonlinear optical devices.

Pulsed laser ablation is increasingly being applied to locally open the rear dielectric layer of advanced silicon wafer solar cell structures, such as aluminum local back surface field solar cells. We report that the laser ablation process on the rear surface of the solar cell at a relatively low laser fluence can cause undesirable spallation at the front surface which is textured with random upright pyramids. This phenomenon is attributed to the enhancement of the surface spallation effect by up to 3 times due to the confinement of the pressure waves at the tips of these random pyramids. Laser ablation at different laser focus positions and laser fluences is carried out to achieve optimized laser processing of the solar cells.

Terahertz antenna arrays supporting narrow lattice resonances are proposed as an alternative sensor-on-chip approach to liquid sensing. An array of metallic rectangular antennas fabricated on a polyethylene naphthalate (PEN) substrate is used to demonstrate the sensing of a number of fluids. Good agreement is shown between experiment and simulation with Q-factors of around 20 and a figure-of-merit (FOM) of 3.80 being achieved. Liquid sensing with antenna arrays is simple both in terms of fabrication and setup. The working frequency can be tuned with a suitable choice of substrates and array parameters. The nature of the lattice resonance means that the whole sample is used to provide the conditions required for resonance occurrence, eliminating the need to preferentially locate the sample in small areas of high field concentration. The antenna arrays could also potentially be coupled with a microfluidic system for in situ sensing or used in a reflection setup.

Microscopic split-ring-resonator (SRR) arrays are fabricated on 100 μm thick polyethylene naphthalate (PEN) films by femtosecond laser micro-lens array (MLA) lithography. The transmission properties of these metamaterials are characterized by THz Time Domain Spectroscopy (THz-TDS). Tunable resonance responses can be achieved by changing SRR structural design parameters. By stacking 2D PEN metamaterial films with different frequency responses together, a broadband THz filter with full width at half maximum (FWHM) of 0.38 THz is constructed. The bandwidth of the resonance response increases up to 4.2 times as compared to the bandwidths of single layer metamaterials. Numerical simulation reveals that SRR layers inside the multi-layer metamaterials are selectively excited towards specific frequencies within the broadband response. Meanwhile, more than one SRR layers respond to the chosen frequencies, resulting in the enhancement of the resonance properties. The multi-layer metamaterials provide a promising way to extend SRR based metamaterial operating region from narrowband to broadband with a tunable feature., (© 2011 Optical Society of America)

Arrays of plasmonic pentamers consisting of five metallic nano-disks were designed and fabricated to achieve a pronounced Fano Resonance with polarization-independent far-field spectral response at normal incidence due to the structure symmetry of pentamers. A mass-spring coupled oscillator model was applied to study plasmon interactions among the nano-disks. It was found that the direction of the excitation light polarization can flexibly tune the spatial localization of near-field energy at sub-wavelength scales while the collective optical properties are kept constant. It can lead to a selective storage of excited energy down to sub-20 nm gap at a normal incident with a single light source.

Based on medium-tuned optical field enhancement effect around a self-assembled particle-lens array (PLA) irradiated with a femtosecond (fs) laser source, we demonstrated that high-precision periodical array of micro/nano-structures can be readily fabricated on glass surface or inside glass in large areas in parallel without any cracks or debris. The technique has potential for rapid fabrication of three-dimensional structures in multiple layers inside glass.

We convert a linearly polarized Gaussian beam into a radially polarized doughnut beam with an eight-segment spirally varying retarder (SVR) at wavelength of 808 nm. The SVR is designed based on the linear birefringence of alpha-barium borate (alpha-BBO) crystal and fabricated using a dry etching process. Radially polarized light of high purity (> 96% at far-field distribution) was generated experimentally using the segmented SVR positioned between two quarter waveplates with orthogonal slow axes. The emergent polarization can be switched between radially and azimuthally polarized cylindrical vector beams with a pair of half-wave plates.

Tuning of surface plasmon resonance by gold and silver bimetallic thin film and bimetallic dot array is investigated. Laser interference lithography is applied to fabricate the nanostructures. A bimetallic dot structure is obtained by a lift-off procedure after gold and silver thin film deposition by an electron beam evaporator. Surface plasmon behaviors of these films and nanostructures are studied using UV-Vis spectroscopy. It is observed that for gold thin film on quartz substrate, the optical spectral peak is blue shifted when a silver thin film is coated over it. Compared to the plasmon band in single metal gold dot array, the bimetallic nanodot array shows a similar blue shift in its spectral peak. These shifts are both attributed to the interaction between gold and silver atoms. Electromagnetic interaction between gold and silver nanostructures is discussed using a simplified spring model.

Ultrafast high-density photonic integrated circuit devices (PICDs) are not easily obtained using traditional index-guiding mechanisms. In this paper, photonic bandgap crystal resonator enhanced, laser-controlled modulations of optical interconnect PICDs were achieved in slab-type mix-guiding configuration - through developed CMOS-compatible processing technologies. The devices, with smallest critical dimensions of 90 nm have footprints of less than 5 x 5 microm(2). Quality-factors an order larger than previously realized was achieved. Through use of effective coupling structures; simultaneous alignment for probing and pumping laser beams, optical measurements of both instantaneous free carriers induced device modulations were obtained together with thermo-optical effects characterizations.

A novel high-resolution confocal measurement of nanometric displacement that uses a simple 2 x 1 optical fiber coupler is presented. The basic principle is to detect interferometrically the change in the phase difference between two adjacent input fibers of the coupler that results from the nonuniform wave-front curvature of the reflected light. Measurement of subnanometer axial modulation, which permits high-resolution displacement sensing by optical means, is demonstrated.