Search

We present an operational characterization of a vertical-external-cavity surface-emitting laser emitting around 739 nm with over 150 mW in a single fundamental spatial mode. Results show that the laser is capable of oscillating on a single cavity axial mode at 740 nm for up to 22 mW. Tuning of the optical emission is shown to reach 737.3 nm. Furthermore, at best performance, the laser exhibits a slope efficiency of 8.3% and a threshold power of 1.27 W for an output coupler reflectivity of 98%.

Ptychographic Coherent diffractive imaging (PCDI) is a significant advance in imaging allowing the measurement of the full electric field at a sample without use of any imaging optics. So far it has been confined solely to imaging of linear optical responses. In this paper we show that because of the coherence-preserving nature of nonlinear optical interactions, PCDI can be generalised to nonlinear optical imaging. We demonstrate second harmonic generation PCDI, directly revealing phase information about the nonlinear coefficients, and showing the general applicability of PCDI to nonlinear interactions.

We demonstrate for the first time to our knowledge intra-cavity frequency doubling (ICFD) of an edge-emitter diode laser using a 10 mm-long 5.0 microm periodically poled LiNbO(3) (PPLN) crystal. An optical output power of 33 mW second harmonic blue light at 490.5 nm is generated at 1.0 A injection current, equivalent to an overall wall-plug efficiency of 1.8%. The measured M(2) values of blue beam are 1.7 and 2.4 along the fast and slow axis.

A compact green laser of 1.3 W output at 534.7 nm is generated by intracavity frequency doubling (ICFD) of a 49 edge-emitter laser bar using a MgO-doped (PPLN) bulk crystal. The measured M(2) values of green beam are 12.1 and 2.9 along the slow and fast axes, respectively. To our knowledge, this is the first demonstration of the ICFD of multi-edge-emitters laser bar.

Liquid crystal tunable planar Bragg Gratings produced by Direct UV Writing are capable of wavelength tuning of over 100GHz. However, such devices exhibit non-linear tuning curves with threshold points and hysteresis. We show that these effects are due to the formation of disclination structures in the liquid crystal and discuss the role of electrode defects and sample temperature on wavelength tuning.

We report on successful realization of a picosecond visible-continuum source embedding a single mode fiber taper. The output of ytterbium mode-locked fiber laser was frequency doubled in a periodically-polled lithium niobate (PPLN) crystal to produce green pump light. Spectral brightness of the white light generated in the tapered fiber was improved by limiting the broadening just to the visible wavelengths. The influence of taper parameters, particularly the dispersion, on white light spectrum has been studied.

We report a modified technique for the fabrication of zinc-diffused channel waveguides using z-cut electric-field periodically poled LiNbO3. Unlike previous work, the diffusion was carried out using metallic zinc at atmospheric pressure. By optimizing the thermal diffusion parameters, channel waveguides that preserve the existing periodically poled domain structures, support both TE and TM modes, and enhance photorefractive damage resistance were obtained. Nonlinear characterisation of the channel waveguides was investigated via second harmonic generation of a 1552nm laser with a maximum conversion efficiency of 59%W-1cm-2 at 14.6 masculineC. Using a pulsed source a second harmonic conversion efficiency of 81% was achieved.

We report the fabrication of optical channel waveguides in congruent lithium niobate single crystals by direct writing with continuous-wave ultraviolet frequency-doubled Ar+ laser radiation (244 nm). The properties and performance of such waveguides are investigated, and first results are presented.

A synchronously pumped optical parametric oscillator, based on periodically poled lithium niobate, has operated at idler wavelengths out to 7.3 microm . Directly measured idler output powers (average) are 4.2 mW at 6.1 microm, 0.5 mW at 7.0 microm, and 0.04 mW at 7.25 microm . Characterization of the idler output indicates essentially bandwidth-limited and diffraction-limited operation.

We report the fabrication of a 12-mum -thick periodically poled LiNbO(3) planar waveguide buried in LiTaO(3) by direct bonding of precision-polished surfaces. Frequency doubling of the 1064-nm output of a cw diode-pumped Nd:YAG laser was performed in a 5.5-mm-long device with a 6.50-mum -period grating at an elevated temperature of 174 degrees C. The resultant green second-harmonic output exhibited fundamental-spatial-mode characteristics at a 4.3%W(-1) conversion efficiency.