Search

We report on the use of a 61 beamlets coherent beam combination femtosecond fiber amplifiers as a digital laser source to generate high-power orbital angular momentum beams. Such an approach opens the path for higher-order non-symmetrical user-defined far field distributions.

Coherent beam combining in tiled-aperture configuration is demonstrated on seven femtosecond fiber amplifiers using an interferometric phase measurement technique. The residual phase error between two fibers is as low as λ/55 RMS and a combination efficiency of 48% has been achieved. The combined pulses are compressed to 216 fs, delivering 71 W average power at a repetition rate of 55 MHz. Operating the laser system in a nonlinear regime with an estimated B-integral of 5 rad yields a combining efficiency of 45% with the same phase stability. These results pave the way to very large high-power and high energy coherent beam combining systems.

We experimentally investigate the evolution of the direct detection noise figure of a nondegenerate phase-sensitive amplifier based on a nonlinear fiber, as a function of the relative phase between the signal, idler, and pump, all other parameters remaining fixed. The use of a fiber with a high stimulated Brillouin scattering threshold permits us to investigate the full range of phase-sensitive gain and noise figure without pump dithering. Good agreement is found with theory, both for signal only and combined signal and idler direct detections.

We present a thorough investigation aimed at the optimization of a phase-sensitive optical parametric amplifier capable of simultaneous phase and amplitude regeneration. The regeneration potential, quantified in terms of the phase-sensitive extinction ratio, has been carefully assessed by a scalar model involving high-order waves associated with high-order four-wave mixing processes, going beyond the usual three-wave approach. Additionally, this model permits to unveil the physics involved in the high-order waves assisted regeneration. This permits a multi-dimensional and comprehensive optimization that fully exploits the underlying regenerative capability and expedites the design of a transparent regenerator, showing the potential to act as basic building block in future all-optical processing. We also compare different strategies when such regenerators are configured in concatenation. The approach can be readily applied to virtually any similar applications for different all-optical processing functionalities.

Operation of a degenerate dual-pump phase sensitive amplifier (PSA) is thoroughly numerically investigated using a multi-wave model, taking into account high-order waves associated with undesired four-wave mixing (FWM) processes. More accurate phase-sensitive signal gain characteristics are obtained compared to the conventional 3-wave model, leading to precise optimization of the pump configuration in a degenerate dual-pump PSA. The signal gain for different pump configurations, as well as the phase sensitivity, is obtained and interpreted by investigating the dominant FWM processes in terms of the corresponding phase matching. Moreover, the relation between dispersion slope and the width of the signal gain curve versus the pump-pump wavelength separation is revealed, permitting the application-oriented arbitrary tailoring of the signal gains by manipulating the dispersion profile and pump wavelength allocation.

We demonstrate a single-polarization all-solid hybrid microstructured optical fiber with a UV-induced Bragg grating. A strong (∼20 dB) UV-induced Bragg grating was inscribed within the 30 nm-wide single-polarization window of the fiber, producing polarized Bragg reflection. The sharp band-edge cutoff allows a large polarization-extinction ratio of the Bragg reflection. The hybrid structure of the fiber enabled minimal UV exposure to the high-index regions and the location of the single-polarization window was maintained after the grating was inscribed.

We demonstrate that direct sequence optical code- division multiple-access (DS-OCDMA) encoders and decoders using sampled fiber Bragg gratings (S-FBGs) behave as multipath interferometers. In that case, chip pulses of the prime sequence codes generated by spreading in time-coherent data pulses can result from multiple reflections in the interferometers that can superimpose within a chip time duration. We show that the autocorrelation function has to be considered as the sum of complex amplitudes of the combined chip as the laser source coherence time is much greater than the integration time of the photodetector. To reduce the sensitivity of the DS-OCDMA system to the coherence time of the laser source, we analyze the use of sparse and nonperiodic quadratic congruence and extended quadratic congruence codes.