Search

Actively wide-angle broadband terahertz (THz) antireflection (AR) coatings with a flexible reconfigurability have a great potential for the development of next-generation versatile THz components and systems with high performance. Here, we present a reconfigurable wide-angle broadband THz AR coating using a phase change material Ge 2 Sb 2 Te 5 (GST) film, which is based on the impedance matching method. The performance of GST-based AR coating can be effectively achieved by a thermal excitation, exhibiting the complete suppression of unwanted THz-wave reflections for incidence angles from 0 ∘ to 50 ∘ in the broad frequency range of 0.1-3.0 THz. Simulation and experimental results show that the GST-based AR coating can efficiently eliminate Fabry-Perot interference caused by unwanted THz-wave reflections from the substrate, thereby significantly improving the performances of THz devices. Moreover, the active AR mechanism of the GST-based coating is investigated, which elucidates the essential role of the phase transition between the amorphous and crystalline phases in changing the conductivity of the film to achieve an impedance matching condition under thermal excitation. Additionally, the non-volatile properties of GST can enable the AR coating to retain a long-term stability for optimal wave-impedance matching without power holding requirements. Our work provides a new, to the best of our knowledge, and promising way for realizing high-performance integrated THz components and systems in the future.

Topological chiral edge states in photonic Chern insulators, which exhibit the one-way propagation property with reflection-free behavior and excellent robustness against perturbations, have become an important frontier in topological photonics. Currently, there have been many studies on its robust propagation behavior, but few studies have focused on its radiation properties. In developing functional photonic devices (e.g., topological antennas) for real-world applications, studying traveling-wave radiation characteristics based on chiral edge states deserves more attention. In this Letter, we propose a topological traveling-wave radiation system based on chiral edge states in photonic Chern insulators that show a steerable beam and reflection-free property. By introducing the perturbation controlled by magnetic fields, we demonstrate that exploiting a certain strength of perturbation can flexibly manipulate the radiation beam. In particular, the proposed dual-channel topological traveling-wave radiation system can not only improve the gain but also overcome the issue of impedance matching. The proposed configurations provide a novel way to manipulate topological-wave radiation and have potential applications for designing topological traveling-wave antennas with a reflection-free property.

Atomically thin transition metal dichalcogenides (TMDS) offer a promising route to the scaling down of optoelectronic devices to the ultimate thickness limit. But the weak light-matter interaction caused by their atomically thin nature makes them inevitably rely on external photonic structures to enhance optical absorption. Here, we report chiral absorption enhancement in atomically thin tungsten diselenide (WSe 2 ) using chiral resonances in photonic crystal (PhC) nanostructures patterned directly in WSe 2 itself. We show that the quality factors (Q factors) of the resonances grow exponentially as the PhC thickness approaches atomic limit. As such, the strong interaction of high Q factor photonic resonance with the coexisting exciton resonance in WSe 2 results into self-coupled exciton-polaritons. By balancing the light coupling and absorption rates, the incident light can critically couple to chiral resonances in WSe 2 PhC exciton-polaritons, leading to the theoretically limited 50% optical absorptance with over 84% circular dichroism (CD).

We demonstrate a new non-mydriatic ultra-widefield optical coherence tomography retinal imaging system, designed with custom optics to improve the imaging field of view, lateral resolution, and patient comfort. The key motivation is to address the challenge with conventional systems that require pupillary dilation, adding time, expense, discomfort, and medical risk to the examination of the retina. Our system provides an ultrawide 100° field of view (beam scanning angle at the scanning pivot point) and maintains a lateral resolution of 20 µm on the center. It also allows a generous working distance of 16 mm, 2-3 times longer than existing ultra-widefield OCT imaging systems. This advanced system was able to avoid iris vignetting artifacts without pharmacological dilation and ensure diffraction-limited ultra-widefield imaging under a generalized eye model. This enables a comprehensive evaluation of retina diseases, especially those affecting the peripheral regions.

In this Letter, we propose and experimentally demonstrate a highly sensitive distributed dynamic pressure sensor based on a dual-linear frequency modulated optical frequency domain reflectometry (OFDR) and a coating thickness-enhanced single-mode fiber (SMF). A dual-sideband linear frequency modulation (LFM) signal is used to interrogate the sensing fiber, which allows us to obtain a dual-sideband Rayleigh backscattering signal. Due to the opposite slopes of the two LFM sidebands, the Rayleigh backscattering spectra of the two sidebands drift in opposite directions when the fiber is disturbed. By subtracting the frequency shifts of the two spectra, we can double the system's sensitivity. We further enhance the sensitivity by using an SMF with a coating thickness of 200 μm. This results in a pressure sensitivity of 3979 MHz/MPa, a measurement accuracy of 0.76 kPa, and a spatial resolution of 35 cm over a 500 m optical fiber. Our system successfully detected a dynamic pressure change at a sampling rate of 1.25 kHz, demonstrating the sensor's excellent dynamic measuring capabilities.

Optical traps, including those used in atomic physics, cold chemistry, and quantum science, are widely used in the research on cold atoms and molecules. Owing to their microscopic structure and excellent operational capability, optical traps have been proposed for cold atom experiments involving complex physical systems, which generally induce violent background scattering. In this study, using a background-free imaging scheme in cavity quantum electrodynamics systems, a cold atomic ensemble was accurately prepared below a fiber cavity and loaded into an optical trap for transfer into the cavity. By satisfying the demanding requirements for the background-free imaging scheme in optical traps, cold atoms in an optical trap were detected with a high signal-to-noise ratio while maintaining atomic loading. The cold atoms were then transferred into the fiber cavity using an optical trap, and the vacuum Rabi splitting was measured, facilitating relevant research on cavity quantum electrodynamics. This method can be extended to related experiments involving cold atoms and molecules in complex physical systems using optical traps.

Developing high-power laser technology and its applications necessitates improvements in the laser-irradiation resistance of liquid-crystal modulation devices. In this study, the thermal characteristics of substrate and electrode materials, including sapphire-substrate indium tin oxide (ITO) electrodes, K9 glass-substrate ITO electrodes, sapphire-substrate gallium nitride (GaN) electrodes, and liquid-crystal optical switches, are investigated using simulation and experimental methods. Results show that the sapphire-substrate GaN electrode demonstrates the best heat dissipation and that the maximum temperature at the center of the spot under 75 W laser irradiation is 319 K, 52 K lower than that of an equally thick sapphire-substrate ITO electrode and 225 K lower than that of an equally thick K9 glass-substrate ITO electrode (steady state and test time >2min). Additionally, the experimental results show that the liquid-crystal optical switch, comprising a sapphire substrate and GaN electrode, can endure continuous laser irradiation up to 18 W with a switching ratio of approximately 20:1. The optical switch with GaN electrodes on a sapphire substrate can endure a power density of 156 W / c m 2 , much higher than that (21 W / c m 2 , steady state and test time >2min) tolerable by the liquid-crystal optical switch with ITO transparent electrodes and K9 glass substrates.

Comprehensive visualization of retina morphology is essential in the diagnosis and management of retinal diseases in pediatric populations. Conventional imaging techniques often face challenges in effectively capturing the peripheral retina, primarily due to the limitations in current optical designs, which lack the necessary field of view to characterize the far periphery. To address this gap, our study introduces a novel ultra-widefield optical coherence tomography angiography (OCTA) system. This system, specifically tailored for pediatric applications, incorporates an ultrahigh-speed 800 kHz swept-source laser. The system's innovative design achieves a 140° field of view while maintaining excellent optical performance. Over the last 15 months, we have conducted 379 eye examinations on 96 babies using this system. It demonstrates marked efficacy in the diagnosis of retinopathy of prematurity, providing detailed and comprehensive peripheral retinal angiography. The capabilities of the ultra-widefield handheld OCTA system in enhancing the clarity and thoroughness of retina vascularization assessments have significantly improved the precision of diagnoses and the customization of treatment strategies. Our findings underscore the system's potential to advance pediatric ophthalmology and broaden the scope of retinal imaging., Competing Interests: SN: OHSU (P); YaJ: Genentech (F, P); Optovue/Visionix (P, R); Optos (P). DH: Visionix (F, P, R); Genentech (P, R); Intalight (F); Canon (F); Cylite (F); JPC: OHSU (P); Siloam Vision (F); YiJ: OHSU (P); Siloam Vision (F). All other authors declare they have no competing interests., (© 2024 Optica Publishing Group.)

We experimentally generate nondiffracting speckles that carry non-Markovian properties by encoding the wavefront of a monochromatic laser beam with ring-shaped non-Markovian phases. The resulting non-Markovian nondiffracting fields present a ring-shaped pattern and central dark notches, which are analyzed with an expression of the orbital angular momentum spectra of the wavefront possessing ring-shaped non-Markovian phases. Furthermore, we demonstrate that the intensity profiles of these non-Markovian nondiffracting fields exhibit stability over multiple Rayleigh ranges, and their statistical properties could be controlled with the non-Markovianity of the input phase masks. This work presents an approach for simultaneously tailoring the diffracting property and non-Markovianity of optical fields and provides a deeper understanding of non-Markovian processes.

Optical coherence tomography (OCT) and its extension OCT angiography (OCTA) have become essential clinical imaging modalities due to their ability to provide depth-resolved angiographic and tissue structural information non-invasively and at high resolution. Within a field of view, the anatomic detail available is sufficient to identify several structural and vascular pathologies that are clinically relevant for multiple prevalent blinding diseases, including age-related macular degeneration (AMD), diabetic retinopathy (DR), and vein occlusions. The main limitation in contemporary OCT devices is that this field of view is limited due to a fundamental trade-off between system resolution/sensitivity, sampling density, and imaging window dimensions. Here, we describe a swept-source OCT device that can capture up to a 12 × 23-mm field of view in a single shot and show that it can identify conventional pathologic features such as non-perfusion areas outside of conventional fields of view. We also show that our approach maintains sensitivity sufficient to visualize novel features, including choriocapillaris morphology beneath the macula and macrophage-like cells at the inner limiting membrane, both of which may have implications for disease.

In this work, we employ 87 Rb atoms as rotation media to manipulate the polarization of optical fields in both magnetic and magnetic-free environments. Employing the nonlinear magneto-optical rotation mechanism, we achieve a state-of-the-art magneto-optical rotation coefficient of 1.74×10 8 rad⋅T -1 ⋅m -1 which is four orders of magnitude higher than commonly employed materials. Additionally, in a magnetic-free environment, we achieve all-optical cross-polarization modulation between the pump and probe light via Rb atoms. The nonlinear magneto-optical rotation configuration introduces inventive techniques for a new type of magneto-optical modulator while the all-optical configuration paves the way for exploring photonic integrated circuit (PIC) devices free from disruptions caused by electrical or magnetic crosstalk.

The Risley-prism imaging system (RPIS) is a powerful way to achieve bionic human eye imaging with great advantages on large field of view (FOV) and variable resolution imaging owing to the autonomous controlled deflection of light. But the imaging dispersion originating from nonlinear and uneven light deflection results in limited imaging wavelength that seriously hinders its application. The existing solutions for imaging dispersion mainly rely on the hardware, which generally has bulky structure and limited improvement on image. Besides, the existing image evaluation methods for dispersion are not suitable for RPIS due to inhomogeneous dispersion. Herein, this paper systematically analyzes the mechanism and characteristics of dispersion in the RPIS, and proposes a cooperative correction method for image distortion and dispersion of multiple-color imaging, achieving the elimination of distortion and dispersion simultaneously without changing the optical structure. A dispersion evaluation index based on Pearson's correlation coefficient (PCC) is also established, and the objectivity and validity of the index are proved by experiments. Furthermore, a kind of compact RPIS based on an RGB camera is built, and both indoor and outdoor experiments are conducted. The experimental results demonstrate that proposed algorithm has strong universality and robustness for various scenes and targets.

A real-time line-field optical coherence tomography (LF-OCT) system is demonstrated with image acquisition rates of up to 5000 B-frames or 2.5 million A-lines per second for 500 A-lines per B-frame. The system uses a high-speed low-cost camera to achieve continuous data transfer rates required for real-time imaging, allowing the evaluation of future applications in clinical or intraoperative environments. The light source is an 840 nm super-luminescent diode. Leveraging parallel computing with GPU and high speed CoaXPress data transfer interface, we were able to acquire, process, and display OCT data with low latency. The studied system uses anamorphic beam shaping in the detector arm, optimizing the field of view and sensitivity for imaging biological tissue at cellular resolution. The lateral and axial resolution measured in air were 1.7 µm and 6.3 µm, respectively. Experimental results demonstrate real-time inspection of the trabecular meshwork and Schlemm's canal on ex vivo corneoscleral wedges and real-time imaging of endothelial cells of human subjects in vivo ., Competing Interests: David Huang: Optovue Inc. (F, I, P, R). These potential conflicts of interest have been reviewed and managed by OHSU. Other authors declare no relevant conflicts of interest related to this article., (© 2024 Optica Publishing Group.)

We demonstrate a laser-diode-pumped multipass Nd:glass laser amplifier with a range of advanced characteristics. The amplifier exhibits high extraction efficiency, enables arbitrary shaping of spatial beam intensity, and effectively suppresses frequency modulation to amplitude modulation conversion. Our approach achieves excellent beam quality via thermal lensing and thermal depolarization compensation. When a 1.82 mJ/5 ns laser pulse was injected into the amplifier, the output energy reached up to 3.3 J with a repetition rate of 1 Hz at a central wavelength of 1053.3 nm. The near-field modulation of the amplified output beam was below 1.2, and the far-field focusing ability of the beam was 90% at 2.9 times the diffraction limit. This laser amplifier system holds potential for integration as a preamplifier within the SG-II upgrade high power laser facility.

In this work, we proposed a state-of-the-art metasurface model that breaks the mirror symmetry and rotation symmetry of the structure. It consists of two-layer rotating gold split rings, and has the capability of chirality-selective absorption for circularly polarized light (CPL) in two bands. The absorption peaks for left- and right- circularly polarized (LCP&RCP) light appeared at 989 nm and 1404 nm, respectively, with the maximum absorptivity of 98.5% and 96.3%, respectively. By changing the rotation angle of the two-layer gold split rings, it could also be designed as a single-band chiral metasurface absorber, which only absorbed RCP light but not LCP light, and the absorptivity of RCP light could be up to 97.4%. Furthermore, we found our designed absorbers had the characteristics of great circular dichroism (CD) and symmetric absorption. The physical mechanism of the selective absorption of CPL by the absorbers may be explained by the current vector analysis. In addition, the absorption peak could be tuned with the changing of the geometrical parameters of the structure. The proposed chirality-selective metasurface absorbers could be used in CD spectral detection, optical communication, optical filtering, and other fields.

Non-line-of-sight (NLOS) imaging allows for the imaging of objects around a corner, which enables potential applications in various fields, such as autonomous driving, robotic vision, medical imaging, security monitoring, etc. However, the quality of reconstruction is challenged by low signal-to-noise ratio (SNR) measurements. In this study, we present a regularization method, referred to as structure sparsity (SS) regularization, for denoising in NLOS reconstruction. By exploiting the prior knowledge of structure sparseness, we incorporate nuclear norm penalization into the cost function of the directional light-cone transform (DLCT) model for the NLOS imaging system. This incorporation effectively integrates the neighborhood information associated with the directional albedo, thereby facilitating the denoising process. Subsequently, the reconstruction is achieved by optimizing a directional albedo model with SS regularization using the fast iterative shrinkage-thresholding algorithm (FISTA). Notably, the robust reconstruction of occluded objects is observed. Through comprehensive evaluations conducted on both synthetic and experimental datasets, we demonstrate that the proposed approach yields high-quality reconstructions, surpassing the state-of-the-art reconstruction algorithms, especially in scenarios involving short exposure and low-SNR measurements.

Spin-dependent absorption has been widely studied in metamaterials and metasurfaces with chirality since it develops significant applications in multiplexed holograms, photodection, and filtering. Here, the one-dimensional photonic crystal Fabry-Perot (FP) cavity containing a multi-Weyl semimetal (mWSM) defect is proposed to investigate the spin-dependent perfect absorption. Results denote that the distinct refractive indices of right hand circularly polarized (RCP) and left hand circularly polarized (LCP) waves are present due to the nonzero off-diagonal term of mWSM, thus supporting the perfect absorption of RCP and LCP waves at distinct resonant wavelengths. The different perfect absorption wavelengths of RCP and LCP waves reveal the spin-dependent perfect absorption. By altering the Fermi energy, tilt degree of Weyl cones, Weyl nodes separation, topological charge, and thickness of the mWSM layer, the perfect absorption wavelength of RCP and LCP waves can be regulated conveniently. Particularly, the linear tunable perfect absorption wavelength with thickness of the mWSM layer supports the accurate determination of perfect absorption wavelength at distinct mWSM thicknesses. Our studies develop simple and effective approaches to acquire the spin-dependent and adjustable perfect absorption without the external magnetic field, and can find practical applications in spin-dependent photonic devices.

This pilot study reports the development of optical coherence tomography (OCT) split-spectrum amplitude-decorrelation optoretinography (SSADOR) that measures spatially resolved photoreceptor response to light stimuli. Using spectrally multiplexed narrowband OCT, SSADOR improves sensitivity to microscopic changes without the need for cellular resolution or optical phase detection. Therefore, a large field of view (up to 3 × 1 mm 2 demonstrated) using conventional OCT instrument design can be achieved, paving the way for clinical translation. SSADOR promises a fast, objective, and quantifiable functional biomarker for photoreceptor damage in the macula.

Silicon-based optical neural networks offer the prospect of high-performance computing on integrated photonic circuits. However, the scalability of on-chip optical depth networks is restricted by the limited energy and space resources. Here, we present a silicon-based photonic convolutional neural network (PCNN) combined with the kernel pruning, in which the optical convolutional computing core of PCNN is a tunable micro-ring weight bank. Our numerical simulation demonstrates the effect of weight mapping accuracy on PCNN performance and we find that the performance of PCNN decreases significantly when the weight mapping accuracy is less than 4.3 bits. Additionally, the experimental demonstration shows that the accuracy of the PCNN on the MNIST dataset has a slight loss compared to the original CNN when 93.75 % of the convolutional kernels are pruned. By making use of kernel pruning, the energy saved by a convolutional kernel removal is about 202.3 mW, and the overall energy saved has a linear relationship with the number of kernels removed. The methodology is scalable and provides a feasible solution for implementing faster and more energy-efficient large-scale optical convolutional neural networks on photonic integrated circuits.

We propose a synchronized time lens based temporal magnifier for the characterization of an ultrafast pulse, which is assisted by the phase lock loop (PLL) to actively lock the repetition rates of the pump laser and signal laser. A feedback control system combining a proportional-integral (PI) circuit and a piezoelectric transducer (PZT) inside the signal laser cavity is used to synchronize the repetition rates between the pump and signal lights. Benefitting from the PLL technique, the temporal position of the signal pulse remains as the numerical aperture of the time lens system, and therefore it has a high short-time stability for pulse measurement. This synchronized time lens based temporal magnifier can record single-shot pulses within continuous round trips. By engineering the dispersion of the pump, signal, and idler lights, we demonstrate a 200× magnification of the signal pulse. Our technique offers a simple synchronized method in a time lens system for ultrafast temporal characterization, which provides new insights into the observation of the fiber laser dynamics.

Rayleigh scattering-based distributed optical fiber sensors with long sensing distance and large dynamic range are highly desired for application scenarios such as vehicle tracking, structure health monitoring, and geological survey. To enlarge the dynamic range, we propose a coherent optical time domain reflectometry (COTDR) based on double-sideband linear frequency modulation (LFM) pulse. By utilizing I/Q demodulation, both the positive and negative frequency band of the Rayleigh backscattering (RBS) signal can be properly demodulated. Consequently, the dynamic range is doubled without increasing the bandwidth of signal generator, photodetector (PD), and oscilloscope. In the experiment, the chirped pulse with 10 μs pulse width and 498 MHz frequency sweeping range is launched into the sensing fiber. Single-shot strain measurement is achieved over 5 km single-mode fiber with a spatial resolution of 2.5 m and a strain sensitivity of 7.5 pε/ H z . A vibration signal with 3.09 με peak-to-peak amplitude (corresponding to 461 MHz frequency shift) is successfully measured with the double-sideband spectrum, which cannot be properly recovered with the single-sideband spectrum.

Projection artifacts are a significant limitation of optical coherence tomographic angiography (OCTA). Existing techniques to suppress these artifacts are sensitive to image quality, becoming less reliable on low-quality images. In this study, we propose a novel signal attenuation-compensated projection-resolved OCTA (sacPR-OCTA) algorithm. In addition to removing projection artifacts, our method compensates for shadows beneath large vessels. The proposed sacPR-OCTA algorithm improves vascular continuity, reduces the similarity of vascular patterns in different plexuses, and removes more residual artifacts compared to existing methods. In addition, the sacPR-OCTA algorithm better preserves flow signal in choroidal neovascular lesions and shadow-affected areas. Because sacPR-OCTA processes the data along normalized A-lines, it provides a general solution for removing projection artifacts agnostic to the platform., Competing Interests: Jie Wang: Optovue/Visionix, Inc (P, R); David Huang: Optovue/Visionix, Inc. (F, P, R), Boeringer Ingelheim Inc. (C); Yali Jia: Optovue/Visionix, Inc. (P, R), Optos Inc. (P)., (© 2023 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement.)

We experimentally demonstrate a narrow linewidth semiconductor multi-wavelength distributed feedback (DFB) laser array by simultaneously injection locking each laser to the corresponding resonance of a single on-chip microring resonator. The white frequency noises of all the DFB lasers is reduced by more than 40 dB once they are simultaneously injection locked to a single microring resonator with a quality factor (Q-factor) of 2.38 million. Correspondingly, the instantaneous linewidths of all the DFB lasers are narrowed by a factor of 10 4 . In addition, frequency combs originating from non-degenerate four-wave mixing (FWM) between the locked DFB lasers are also observed. Simultaneously injection locking multi-wavelength lasers to a single on-chip resonator may enable the possibilities of integrating a narrow-linewidth semiconductor laser array on a single chip and having multiple microcombs in a single resonator, which are in high demand in wavelength division multiplexing coherent optical communication systems and metrological applications.

Cross-calibration methods are widely used in high-precision remote sensor calibrations and ensure observational consistency between sensors. Because two sensors must be observed under the same or similar conditions, the cross-calibration frequency is greatly reduced; performing cross-calibrations on Aqua/Terra MODIS, Sentinel-2A/Sentinel-2B MSI and other similar sensors is difficult due to synchronous-observation limitations. Additionally, few studies have cross-calibrated water-vapor-observation bands sensitive to atmospheric changes. In recent years, standard automated observation sites and unified processing technology networks, such as an Automated Radiative Calibration Network (RadCalNet) and an automated vicarious calibration system (AVCS), have provided automatic observation data and means for independently, continuously monitoring sensors, thus offering new cross-calibration references and bridges. We propose an AVCS-based cross-calibration method. By limiting the observational-condition differences when two remote sensors transit over wide temporal ranges through AVCS observation data, we improve the cross-calibration opportunity. Thereby, cross-calibrations and observation consistency evaluations between the abovementioned instruments are realized. The influence of AVCS-measurement uncertainties on the cross-calibration is analyzed. The consistency between the MODIS cross-calibration and sensor observation is within 3% (5% in SWIR bands); that for the MSI is within 1% (2.2% in the water-vapor-observation band); and for the cross-calibration of Aqua MODIS and the two MSI, the consistency between the cross-calibration-predicted TOA reflectance and the sensor-measured TOA reflectance was within 3.8%. Thus, the absolute AVCS-measurement uncertainty is also reduced, especially in the water-vapor-observation band. This method can be applied to cross-calibrations and measurement consistency evaluations of other remote sensors. Later, the spectral-difference influences on cross-calibrations will be further studied.

Kerr soliton frequency comb generation in nonlinear microcavities with compact configurations are promising on-chip sources. Current Kerr comb generation by using a single microcavity with a tunable CW pump laser or high-power femtosecond pulse pump are difficult to be integrated on chip. In this paper, we propose an on-chip soliton comb generation scheme by tuning the coupling coefficient of two coupled microcavities instead of tuning the wavelength of the cw pump laser or using a pulsed pump laser in a single microcavity. The two microcavities are assumed to be identical. We showed by numerical simulation that Kerr comb generation is possible in both the blue and red detuned regions of the main microcavity in the coupled cavity system. We further found that the range and boundary of the soliton generation region of the couple microcavities depend on the coupling coefficient between the coupled cavities. To ensure that the modes being coupled have identical optical paths, we designed a Sagnac loop structure which couples the clockwise and counterclockwise modes in a single microcavity and demonstrated Kerr comb generation in both the blue and red detuned regions by tuning the coupling coefficient. The proposed Kerr comb generation scheme can be utilized for chip-scale integrated soliton comb sources, which will contribute to the development of on-chip applications.

Cavity quantum electrodynamics (cavity QED) with neutral atoms is a promising platform for quantum information processing and optical fiber Fabry-Pérot microcavity with small mode volume is an important integrant for the large light-matter coupling strength. To transport cold atoms to the microcavity, a high-power optical dipole trap (ODT) beam perpendicular to the cavity axis is commonly used. However, the overlap between the ODT beam and the cavity mirrors causes thermal effects inducing a large cavity shift at the locking wavelength and a differential cavity shift at the probe wavelength which disturbs the cavity resonance. Here, we develop a feedback and compensation scheme to maintain the optical fiber microcavity resonant with the lasers at the locking and probe wavelengths simultaneously. The large cavity shift of 210 times the cavity linewidth, which makes the conventional PID scheme ineffective can be suppressed actively by a PIID feedback scheme with an additional I parameter. Differential cavity shift at the probe wavelength can be understood from the photothermal refraction and thermal expansion effects on the mirror coatings and be passively compensated by changing the frequency of the locking laser. A further normal-mode splitting measurement demonstrates the strong coupling between 85 Rb atoms and cavity mode after the thermal effects are suppressed, which also confirms successful delivery and trapping of atoms into the optical cavity. This scheme can solve the thermal effects of the high-power ODT beam and will be helpful to cavity QED experimental research.

Traditional strategies for self-powered devices face limitations in performance improvement due to the trade-off relationship between different parameters. Here, a new kind of ion-modulation self-powered photodetector is first proposed and fabricated by depositing superionic conductor RbAg 4 I 5 on one side of monolayer graphene. The graphene homojunction is successfully formed at the boundary of the asymmetric structure due to the formation of bound states of ions and electrons at the contact interface. This kind of homojunction avoids the trade off between response parameters of traditional self-powered devices because the dissociation of bound states under light irradiation dominates the generation of a photocurrent. The experimental results indicate that the prepared photodetector can achieve great photo response with responsivity of 20 mA/W and a response speed of 700 µs for ultraviolet and visible light when no bias is applied, which is better than most existing graphene-based self-powered devices in single or overall parameters. Further, a semi-quantitative model is systematically established according to the internal mechanism and realizes a good consistency with experimental results. The work provides a new idea and offers the foundation to develop excellent self-powered devices based on superionic materials with good properties in controllability and modulation.

Complete recognition of necrotic areas during small bowel tissue resection remains challenging due to the lack of optimal intraoperative aid identification techniques. This research utilizes hyperspectral imaging techniques to automatically distinguish normal and necrotic areas of small intestinal tissue. Sample data were obtained from the animal model of small intestinal tissue of eight Japanese large-eared white rabbits developed by experienced physicians. A spectral library of normal and necrotic regions of small intestinal tissue was created and processed using six different supervised classification algorithms. The results show that hyperspectral imaging combined with supervised classification algorithms can be a suitable technique to automatically distinguish between normal and necrotic areas of small intestinal tissue. This new technique could aid physicians in objectively identify normal and necrotic areas of small intestinal tissue., Competing Interests: The authors declare that there are no conflicts of interest related to this article., (© 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement.)

We propose a physics-assisted deep neural network scheme in Fourier ptychographic microscopy (FPM) using untrained deep neural network priors (FPMUP) to achieve a high-resolution image reconstruction from multiple low-resolution images. Unlike the traditional training type of deep neural network that requires a large labelled dataset, this proposed scheme does not require training and instead outputs the high-resolution image by optimizing the parameters of neural networks to fit the experimentally measured low-resolution images. Besides the amplitude and phase of the sample function, another two parallel neural networks that generate the general pupil function and illumination intensity factors are incorporated into the carefully designed neural networks, which effectively improves the image quality and robustness when both the aberration and illumination intensity fluctuation are present in FPM. Reconstructions using simulated and experimental datasets are demonstrated, showing that the FPMUP scheme has better image quality than the traditional iterative algorithms, especially for the phase recovery, but at the expense of increasing computational cost. Most importantly, it is found that the FPMUP scheme can predict the Fourier spectrum of the sample outside synthetic aperture of FPM and thus eliminate the ringing effect of the recovered images due to the spectral truncation. Inspired by deep image prior in the field of image processing, we may impute the expansion of Fourier spectrums to the deep prior rooted in the architecture of the careful designed four parallel deep neural networks. We envisage that the resolution of FPM will be further enhanced if the Fourier spectrum of the sample outside the synthetic aperture of FPM is accurately predicted.

The Risley-Prism system, which has advantages in large FOV (field of view), high resolution and flexible imaging, faces limitations in image processing speed due to the non-convex characteristics of the FOV. Here, we proposed a simplified FOV model using inscribed rectangle and its property in area size, equivalent resolution and dynamic characteristics are studied, shows high consistency with original FOV. The simulation and experimental results show that the simplified FOV can reduce the calculation time of the total area of multi sub-FOVs from 3500 ms to 7.4 ms, and the image distortion correction time can also be reduced by 88.9%∼96.9%.

We demonstrate a flat broadband time-stretched swept source based on extra-cavity spectral shaping. By adjusting the polarization-dependent gain profile and driving current of the booster optical amplifier (BOA), extra-cavity spectral shaping is optimized to generate output with a 1-dB bandwidth of ∼100 nm, 3-dB bandwidth of ∼140 nm and output power of ∼21.4 mW. The short-term and long-term stabilities are characterized. The average cross correlation of 183,485 round trips is 0.9997 with a standard deviation of 2×10 -5 , indicating high single-shot spectral similarity and high coherence. The noise floor of relative spectral energy jitter is -141.7 dB/Hz, indicating a high short-term spectral energy stability. The proposed highly stable flat broadband time-stretched swept source is applied to an optical coherence tomography (OCT) system. The axial resolution is 10.8 µm. The proposed swept source can serve as excellent light sources in ultra-fast coherent detection systems for high precision sensing and imaging.

Corneal imaging is important for the diagnostic and therapeutic evaluation of many eye diseases. Optical coherence tomography (OCT) is extensively used in ocular imaging due to its non-invasive and high-resolution volumetric imaging characteristics. Optical coherence microscopy (OCM) is a technical variation of OCT that can image the cornea with cellular resolution. Here, we demonstrate a blue-light OCM as a low-cost and easily reproducible system to visualize corneal cellular structures such as epithelial cells, endothelial cells, keratocytes, and collagen bundles within stromal lamellae. Our blue-light OCM system achieved an axial resolution of 12 µm in tissue over a 1.2 mm imaging depth, and a lateral resolution of 1.6 µm over a field of view of 750 µm × 750 µm., Competing Interests: David Huang: Optovue Inc. (F, I, P, R). These potential conflicts of interest have been reviewed and managed by OHSU. Other authors declare no relevant conflicts of interest related to this article., (© 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement.)

Optical coherence tomography (OCT) is widely used in ophthalmic practice because it can visualize retinal structure and vasculature in vivo and 3-dimensionally (3D). Even though OCT procedures yield data volumes, clinicians typically interpret the 3D images using two-dimensional (2D) data subsets, such as cross-sectional scans or en face projections. Since a single OCT volume can contain hundreds of cross-sections (each of which must be processed with retinal layer segmentation to produce en face images), a thorough manual analysis of the complete OCT volume can be prohibitively time-consuming. Furthermore, 2D reductions of the full OCT volume may obscure relationships between disease progression and the (volumetric) location of pathology within the retina and can be prone to mis-segmentation artifacts. In this work, we propose a novel framework that can detect several retinal pathologies in three dimensions using structural and angiographic OCT. Our framework operates by detecting deviations in reflectance, angiography, and simulated perfusion from a percent depth normalized standard retina created by merging and averaging scans from healthy subjects. We show that these deviations from the standard retina can highlight multiple key features, while the depth normalization obviates the need to segment several retinal layers. We also construct a composite pathology index that measures average deviation from the standard retina in several categories (hypo- and hyper-reflectance, nonperfusion, presence of choroidal neovascularization, and thickness change) and show that this index correlates with DR severity. Requiring minimal retinal layer segmentation and being fully automated, this 3D framework has a strong potential to be integrated into commercial OCT systems and to benefit ophthalmology research and clinical care., Competing Interests: Oregon Health & Science University (OHSU), Dr. David Huang and Dr. Yali Jia have a significant financial interest in Optovue, Inc. These potential conflicts of interest have been reviewed and managed by OHSU. Other authors do not have financial interest to the disclosure of this article., (© 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement.)

A novel hollow-core anti-resonant fiber (HC-ARF) with glass-sheet conjoined nested tubes that supports five core modes of LP01-LP31 with low mode couplings, large differential group delays (DGDs), and low bending losses (BLs) is proposed. A novel cladding structure with glass-sheet conjoined nested tubes (CNT) is induced for the proposed HC-ARF which can suppress mode couplings between the LP01-LP31 modes and the cladding modes. The higher-order modes (HOMs) which are LP11-LP31 modes also have very low loss by optimizing the radius of the nested tube and the core radius. Moreover, the large effective refractive index differences Δn eff between HOMs are all larger than 1 × 10 -4 which contributes to a large DGD in the wavelength range from 1.3 to 1.7 µm. The bending loss of the HC-ARF is analyzed and optimized emphatically. Our calculation results show that bending losses of LP01-LP31 modes are all lower than 3.0 × 10 -4 dB/m in the wavelength range from 1.4 to 1.61 µm even when the fiber bending radius of the HC-ARF is 6 cm.

In this Letter, the mutual dynamics between synchronous solitons in a bidirectional mode-locked fiber laser are studied via dispersive Fourier transform methodology. We explore the spectral evolution and the statistical correlations between solitons with bidirectional propagation, indicating the low and high mutual linear dependences of the spectral energy jitters in stable and breathing mode-locking states, respectively. Moreover, to the best of our knowledge, the oscillating and sliding phase dynamics are experimentally revealed by the interference between bidirectional breathing solitons in ultrafast fiber lasers for the first time. Our findings enrich the understanding of the internal mutual dynamics between bidirectional solitons, which guides the extension of their potential applications, such as Sagnac-effect-based optical sensing.

We couple 1D pulse propagation simulations with laser-solid dynamics in a GaAs quantum wire, solving for the electron and hole populations and the interband and intraband coherences between states. We thus model not only the dynamical dipole contributions to the optical polarization (interband bound-charge response) but also the photo-generation and back-action effects of the net free-charge density (intraband free-charge response). These results show that solving for the dynamic electron and hole intraband coherences leads to plasma oscillations at THz frequencies, even in a 1D solid where plasma screening is small. We then calculate the transverse and longitudinal response of the quantum wire and characterize the dispersion relation for the e-h plasma. This approach allows one to predict the optoelectronic response of 1D semiconductor devices during and after exposure to resonant ultrashort pulses.

We report a method for flexibly switching the dominant polarization of a vertical-cavity surface-emitting laser (VCSEL) by introducing polarization-resolved resonant optical feedback from a whispering-gallery-mode (WGM) cavity to the lasing cavity. Switching between the originally dominant mode and a side mode is experimentally demonstrated under different bias currents once one of them is locked to the resonance mode of the WGM cavity. In addition to a controllable polarization state, the reported VCSEL also demonstrates a linewidth as narrow as tens of kilohertz, which is highly desirable for many applications, including high-speed data communication, light detection and ranging (lidar), and absorption spectroscopy.

An accurate estimation of system parameters is of significance for the practical implementation of the simultaneous quantum key distribution and classical communication (SQCC) over a satellite-mediated link when considering the finite-size effect. In this paper, we propose a Kalman filter (KF)-enabled parameter estimation method for the SQCC over a satellite-mediated link. The fast and slow phase drift can be both estimated by using the improved vector KF carrier phase estimation algorithm, and thus the phase estimation error can be tracked in real time and be almost approximate to the theoretical mean square error limit. Taking advantage of the achieved phase estimation and the dual modulation of the SQCC scheme, the excess noise can be estimated with not only a higher precise but also a lower sacrificing rate of raw keys. Numerical simulations demonstrate the feasibility of the SQCC in both the downlink and uplink in terms of the finite-size effect. As a comparison of the Mth-power algorithm, we find that the secret key rate and achievable zenith angle perform better by using the vector KF algorithm. It paves the way of practical implementations for the SQCC system.

In this paper, a joint communication interference integration signal waveform is proposed to satisfy the need of electronic system integration in civil and military uses, and mitigate the tension of spectrum resource. We design the system structure of the integrated signal model and propose the communication receiving processing flow of the integrated system. We utilize the dense false-target jamming style to raise the constant false alarm rate detection threshold via the delay superposition of multiple groups of frequency modulation (FM) slope mismatch jamming signals, which can play a role in protecting our target from being detected. Furthermore, linear frequency modulation (LFM) signals with different FM slopes and Doppler frequencies are obtained via the modulation mapping of communication data; thus, a single LFM signal can carry n bit data. Through correlation processing and frequency detection, code sequence information can be obtained to achieve communication function. The simulation results show that the integrated signal has the effect of shielding and jamming the pulse compression radar. Moreover, the system has a better bit error rate and a high communication rate, which can ensure that the communication task of sending accurate instructions is completed while implementing effective interference.

Photoreceptor loss and resultant thinning of the outer nuclear layer (ONL) is an important pathological feature of retinal degenerations and may serve as a useful imaging biomarker for age-related macular degeneration. However, the demarcation between the ONL and the adjacent Henle's fiber layer (HFL) is difficult to visualize with standard optical coherence tomography (OCT). A dedicated OCT system that can precisely control and continuously and synchronously update the imaging beam entry points during scanning has not been realized yet. In this paper, we introduce a novel imaging technology, Volumetric Directional OCT (VD-OCT), which can dynamically adjust the incident beam on the pupil without manual adjustment during a volumetric OCT scan. We also implement a customized spoke-circular scanning pattern to observe the appearance of HFL with sufficient optical contrast in continuous cross-sectional scans through the entire volume. The application of VD-OCT for retinal imaging to exploit directional reflectivity properties of tissue layers has the potential to allow for early identification of retinal diseases., Competing Interests: David Huang: Optovue Inc. (F, I, P, R). Brandon J. Lujan: Direction OCT, UC Berkeley (I). Yifan Jian: Seymour Vision (O). These potential conflicts of interest have been reviewed and managed by OHSU. Other authors declare no relevant conflicts of interest related to this article., (© 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement.)

Gapless Dirac fermions in monolayer graphene give rise to an abundance of peculiar physical properties, including exceptional broadband nonlinear optical responses. By tuning the chemical potential, stacking order, and photonic structures, the effective modulation of nonlinear optical phenomena in graphene has been demonstrated in recent years. Here, we demonstrate that optical helicity can be used as an extra tuning knob for four-wave mixing in gated graphene. Our results reveal the helicity selection rule for four-wave mixing in monolayer graphene, revealing nearly perfect circular polarization. Corresponding theoretical interpretations of the helicity selection rule that are also applicable to other nonlinear optical processes and materials are presented.

We demonstrate a handheld swept-source optical coherence tomography (OCT) system with a 400 kHz vertical-cavity surface-emitting laser (VCSEL) light source, a non-contact approach, and an unprecedented single shot 105° field of view (FOV). We also implemented a spiral scanning pattern allowing real-time visualization with improved scanning efficiency. To the best of our knowledge, this is the widest FOV achieved in a portable non-contact OCT retinal imaging system to date. Improvements to the FOV may aid the evaluation of retinal diseases such as retinopathy of prematurity, where important vitreoretinal changes often occur in the peripheral retina.

We propose and demonstrate an all-fiber Er-doped mode-locked laser with a 3-dB spectrum of 114 nm by using nonlinear polarization rotation (NPR), which to the best of our knowledge is the first realization to date of such a broad spectrum without any spatial optical devices. The repetition rate and pulse width of the laser are 183.6 MHz and 3.7 ps, respectively. Such an all-fiber NPR mode-locked laser is then applied in time-stretch optical coherence tomography. The axial resolution is 12.1 µm. The all-fiber high speed broadband swept laser based on the time stretching technique has compact structure and high stability, which is a promising source for frequency metrology and high resolution optical coherence tomography.

For most photonics devices and systems, loss is desperately averted, since it will increase the power consumption and degrade the performance. However, in some non-Hermitian systems, loss can induce a modal gain when the parity-time symmetry is broken, which offers a new way to manipulate the lasing of active cavities. Here we experimentally observe the counterintuitive phenomenon in a single laser cavity assisted by the polarization-dependent loss. A parity-time symmetric system is constituted by the two orthogonally polarized photonic loops in a single laser cavity, which can guarantee the consistency of two coupling loops. The measured output power of the cavity depends on the cross-polarization loss, which reveals virtually opposite relationships before and after the critical point. It provides a novel, to the best of our knowledge, understanding of polarization loss and shows great potential for lasing manipulation in a single cavity with polarization control.

A high-energy, high-beam-quality, high-contrast picosecond optical parametric chirped-pulse amplification (ps-OPCPA) laser system was demonstrated. The pulse from a femtosecond oscillator was stretched to 4 ps, after which it was amplified from 140 pJ to 600 µJ by an 8 ps/6 mJ pump laser in two non-collinear OPCPA stages. The total gain was >10 6 , and the root mean square of the energy stability of the laser system was 1.6% in 10 h. The contrasts of the solid and fiber mode-locked femtosecond oscillator-seeded ps-OPCPA systems were compared, and a signal-to-noise ratio of >10 11 was achieved. Using this system, the contrast of the front end in high-power picosecond petawatt laser facility was improved by ∼40 dB to >10 11 , beyond ∼200 ps ahead of the main pulse with an output level of 60 mJ.

Optical coherence tomography (OCT) and OCT angiography (OCTA) enable noninvasive structural and angiographic imaging of the eye. Portable handheld OCT/OCTA systems are required for imaging patients in the supine position. Examples include infants in the neonatal intensive care unit (NICU) and operating room (OR). The speed of image acquisition plays a pivotal role in acquiring high-quality OCT/OCTA images, particularly with the handheld system, since both the operator hand tremor and subject motion can cause significant motion artifacts. In addition, having a large field of view and the ability of real-time data visualization are critical elements in rapid disease screening, reducing imaging time, and detecting peripheral retinal pathologies. The arrangement of optical components is less flexible in the handheld system due to the limitation of size and weight. In this paper, we introduce a 400-kHz, 55-degree field of view handheld OCT/OCTA system that has overcome many technical challenges as a portable OCT system as well as a high-speed OCTA system. We demonstrate imaging premature infants with retinopathy of prematurity (ROP) in the NICU, a patient with incontinentia pigmenti (IP), and a patient with X-linked retinoschisis (XLRS) in the OR using our handheld OCT system. Our design may have the potential for improving the diagnosis of retinal diseases and help provide a practical guideline for designing a flexible and portable OCT system., Competing Interests: Yifan Jian: Seymour Vision (I). Yali Jia: Optovue, Inc. (F, P). David Huang: Optovue, Inc. (F, I, P, R). These potential conflicts of interest have been reviewed and managed by OHSU. Other authors declare that there are no conflicts of interest related to this article., (© 2021 Optical Society of America under the terms of the OSA Open Access Publishing Agreement.)

Continuous-variable quantum key distribution (CVQKD) holds an advantage of well compatibility with classical coherent optical communications. However, there exists a performance trade-off between CVQKD and classical communication on single-mode fiber (SMF) because of the spontaneous Raman scattering. Space-division multiplexing (SDM) technique may provide a feasible way to mitigate this performance trade-off in short-distance communication while CVQKD coexisting with classical signals on few-mode fiber (FMF). Here, we examine the feasibility of CVQKD coexisting with classical signals on FMF and analyze the noise impact in weak coupling regime. We find that the inter-mode crosstalk generated from the mode coupling and re-coupling between modes and the group delay spread originated from the differential group delay (DGD) contribute the main noise sources. DGD may become one of the main limits for FMF-based CVQKD towards high-speed system. In addition, a well channel wavelength management is needed to suppress the inter-mode four-wave-mixing for achieving the positive secret key rates. The numerical simulations identify the key parameters for CVQKD system, enabling a helpful insight for realizing security analysis of the Gaussian modulated coherent state protocol. It shows that CVQKD coexisting with high power classical signals on FMF is feasible to implement with standard telecommunication components and able to operate at higher secret key rates. The results may provide a potential guideline for the practical high-rate CVQKD integrating with the FMF-based configuration.

Pressure effects on photocarrier dynamics such as interband relaxations and intraband cooling in GaAs have been investigated using in situ time-resolved terahertz spectroscopy with a diamond anvil cell. The interband photocarrier lifetime significantly decreases by nearly two orders of magnitude as the external hydrostatic pressure is increased up to 10 GPa. Considerable pressure tuning for the intervalley scattering processes has also been observed, and the time constants under different pressures are extracted based on the three-state rate model. This work provides new perspectives on tailoring nonequilibrium carrier dynamics in semiconductors using hydrostatic pressure and may serve as the impetus for the development of high-pressure terahertz spectroscopy.

Integrating atomic quantum memories based on color centers in diamond with on-chip photonic devices would enable entanglement distribution over long distances. However, efforts towards integration have been challenging because color centers can be highly sensitive to their environment, and their properties degrade in nanofabricated structures. Here, we describe a heterogeneously integrated, on-chip, III-V diamond platform designed for neutral silicon vacancy (SiV 0 ) centers in diamond that circumvents the need for etching the diamond substrate. Through evanescent coupling to SiV 0 centers near the surface of diamond, the platform will enable Purcell enhancement of SiV 0 emission and efficient frequency conversion to the telecommunication C-band. The proposed structures can be realized with readily available fabrication techniques.