Search

A generalized four-flux method capable of modeling and tuning the spectral reflectance of a diverse range of complex composite coatings is presented. An example application is exploring and maximizing the visible and near-infrared (IR) spectral reflectance available from the diverse structures arising from combinations of the many practical paint ingredients that are available or can be made when applied to different substrates. This requires consideration of scatterers that can differ in composition, particle size, size distribution, and fill factor, and are held in place by a variety of organic binders, which typically partially absorb in the near IR. This extended model is further enhanced by an explicit matrix algorithm that allows analysis of diverse multilayer stacks. This is applied to a multilayer and is designed to model useful changes that result from varying the pigment fill factor as a function of depth within a layer. What we believe is a novel feature is the way the scattering affects matrix absorptance. The model includes contributions to total absorptance from the scattering pigments and from the paint binder that can arise in different bands or simultaneously at the same wavelengths. Model accuracy is demonstrated by example results when compared to experimental data on dried single layer paint profiles using imaged cross sections. The model input covering the actual pigment and binder properties used are material, shape, size, and size distributions, mass added, and the measured optical constants from 400 nm to 2,500 nm of the undoped binder resin layer. One interesting result is the comparison of a two-layered stack, with bigger particles in the first layer and smaller ones in the second, to one with the opposite depth profile.

Dark-mode plasmon resonances can be excited by positioning a suitable nano-antenna above a nanostructure to couple a planar incident wave-front into a virtual point source. We explore this phenomenon using a prototypical nanostructure consisting of a silver nanotriangle into which a hole has been drilled and a rod-like nano-antenna of variable aspect ratio. Using numerical simulations, we establish the behavior of the basic drilled nanotriangle under plane wave illumination and electron beam irradiation to provide a baseline, and then add the nano-antenna to investigate the stimulation of additional dark-mode plasmon resonances. The introduction of a suitably tuned nano-antenna provides a new and general means of exciting dark-mode resonances using plane wave light. The resulting system exhibits a very rich variety of radiant and sub-radiant resonance modes.

We investigate the tunability and strength of the localized surface plasmons of binary metal-in-metal core-shells. Ellipsoids are used as an analytical model to show how the fill factor continuously tunes a hybridized mode between those of the constituents, suggesting the use of metal combinations with widely differing plasma frequencies for broad tunability. A quasistatic eigenmode method is used separate geometric and material parameters to facilitate prediction of hybridized dipole modes in arbitrary shapes. A modified ellipsoid model is found to adequately describe the symmetric dipole-dipole resonance of well-rounded cuboids.

The position, width, extinction, and electric field of localized plasmon modes in closely-coupled linear chains of small spheres are investigated. A dipole-like model is presented that separates the universal geometric factors from the specific metal permittivity. An electrostatic surface integral method is used to deduce universal parameters that are confirmed against results for different metals (bulk experimental Ag, Au, Al, K) calculated using retarded vector spherical harmonics and finite elements. The mode permittivity change decays to an asymptote with the number of particles in the chain, and changes dramatically from 1/f(3) to 1/f(1/2) as the gap fraction (ratio of gap between spheres to their diameter), f, gets smaller. Scattering increases significantly with closer coupling. The mode sharpness, strength and electric field for weakly retarded calculations are consistent with electrostatic predictions once the effect of radiative damping is accounted for.

Optical metrics relating to metallic absorption in representative plasmonic systems are surveyed, with a view to developing heuristics for optimizing performance over a range of applications. We use the real part of the permittivity as the independent variable; consider strengths of particle resonances, resolving power of planar lenses, and guiding lengths of planar waveguides; and compare nearly-free-electron metals including Al, Cu, Ag, Au, Li, Na, and K. Whilst the imaginary part of metal permittivity has a strong damping effect, field distribution is equally important and thus factors including geometry, real permittivity and frequency must be considered when selecting a metal. Al performs well at low permittivities (e.g. sphere resonances, superlenses) whereas Au & Ag only perform well at very negative permittivities (shell and rod resonances, LRSPP). The alkali metals perform well overall but present engineering challenges.

We present a design for a biaxial thin-film coated-plate polarizing beam splitter that transmits the p-polarized component of a beam of light without change of direction and reflects the s-polarized component. The beam splitter has a periodic structure and is planned for fabrication by serial bideposition in mutually orthogonal planes. Recent experimental data for form-birefringent silicon is used to establish the feasibility of the design for a beam splitter to be used at 1310 nm and at an angle of 45 degrees in air.