Search

Effects of cellulose nanofibers (CNF) and cationic starch (CS) were evaluated as coating components relative to the physical and mechanical properties of fluting papersheets fabricated from recycled corrugated cardboard fibers. Fabricated fluting papers were subjected to size press applications by three different coating blends. Coating suspensions were prepared at various concentrations of CNF (0.5%, 1%, 2%, 3%, and 4%) and 4 wt% CS, and the same amounts of CS/CNF. The paper sheets were fabricated using size press machine as three-time repetitive applications, followed by one-time drying section, and compared to uncoated, CScoated, and CNF-coated papers. The application of CNF suspensions increased tensile indices up to 11.7%. Moreover, CS/CNF suspensions resulted in a 67.2% increase in tensile index values. The coating of CS/CNF suspensions increased the burst index values by 163% at the CS+1%CNF concentration when compared to the control pulp. Surface application of prepared suspensions reduced the porosity of the samples under all conditions. The highest reduction in the air permeability was observed in the CS+4%CNF-coated samples as 91.5%. It can be concluded that the superficial applications of CNF on the physical and mechanical properties of recycled fluting paper was more effective in the presence of CS. [ABSTRACT FROM AUTHOR]

This study aimed to evaluate the effect of size press coating on two types of recycled papers using different types of nanofibrillated cellulose (NFC) and cationic starch (CS) on physical and mechanical properties. Wheat straw was used as a cellulose source, and NFC was obtained through oxidative and enzymatic pretreatments. Recycled fluting and coreboard papers were coated with cationic starch/NFC blends at various concentrations of NFC (0.5%, 1%, 2%, 3%, and 4%) using a three-time repetitive size press application, followed by one-time drying section, and compared to uncoated papers. The application of a coating suspension containing 4% periodate-oxidized NFC on both paper surfaces resulted in a significant improvement in the tensile index, burst index, and internal bond strength of the papersheets, with increases of up to 60.6%, 96.3%, and 119.9%, respectively. Furthermore, significant decreases in air permeability were also observed with reductions of 75% and 81.6% for coreboard and fluting papers, respectively. Compared to other pretreatment methods, periodate oxidation resulted in higher viscosity values in NFC samples. Therefore, the application of periodate-oxidized NFC with a size press resulted in a significant improvement in the mechanical and barrier properties of papers made from recycled pulps. [ABSTRACT FROM AUTHOR]

The influence of nanofibrillated cellulose (NFC) was investigated as a reinforcing agent to improve strength properties of papersheets fabricated from recycled pulp fibers of mixtures of old newspapers, old magazines, and old corrugated cardboards. To determine the effects of the NFC on the mechanical and physical properties of the recycled pulp papers, cellulose nanofibrils (NFC) were isolated from wheat straw, pretreated chemically and enzymatically (NFC-OX), and then added to the bulk suspensions of papermaking pulp slurries at various percentages. The electrokinetic and drainage properties of the pulps and the mechanical and physical properties of the papersheets were analyzed and compared. As expected, the addition of NFC/NFC-OX significantly increased the strength properties of papers. Papers containing 4% of NFC-OX (periodate pretreated) presented higher increases in tensile index (43%) and burst index (59.3%) than other papers. However, a high addition of NFC/NFC-OX increased the water retention, which is undesirable for papermaking. Hence, with optimum selection of NFC/NFC-OX and process conditions, higher mechanical properties could be acquired without increasing drainage rate. Compared to the other pretreated NFC/NFC-OX types, sodium-periodate-oxidized NFC-OX samples significantly increased the mechanical properties of the papers fabricated from the recycled pulps. [ABSTRACT FROM AUTHOR]

White ledger is white-grade recycled pulp that replaces the bleached kraft pulp (BKP) that typically forms the top ply of duplex boards. However, sheets made from white ledger are inferior in strength compared with those made from virgin pulp. Therefore, it is necessary to select a proper additive in order to overcome the disadvantages of using white ledger. In this study, the physical properties of white ledger used at a mill that produced duplex boards were analyzed. The effect of cationic polyacrylamides (C-PAMs) with different charge densities and molecular weights on first-pass retention and paper strengths was simultaneously measured. White ledger contains fiber fines and filler fines, which reduced the strength of paper made from white ledger compared with paper made with BKP. This indicates that the improvement of first-pass retention and paper strength is important when the amount of white ledger increases in the top ply of a duplex board. The charge density of CPAM, which acts as a retention aid, is more important than its molecular weight in terms of improving the first-pass retention and paper strength of white ledger. The charge density of C-PAM must be high enough to catch anionic fine particles. [ABSTRACT FROM AUTHOR]