Search

Biomaterials from olive tree pruning are an abundant agricultural residue in various Mediterranean regions. A suggested use of this residue is its separation in a main fraction (trunks and stems with diameter > 1 cm) and a residual fraction (leaves and stems with diameter 1 < cm), using biorefinery procedures. The main fraction is cooked with ethanol, giving rise to a pulp, which can be used either in paper or in bioethanol production if before pulping the main fraction is subjected to a hydrothermal treatment. Pulping with 70% ethanol concentration, 185 °C for 80 min resulted in a pulp with a yield of 46.30% and a content of holocellulose, α-cellulose, and lignin of 77.17%, 62.49%, and 21.73%, respectively. The paper sheets obtained had a breaking length of 1168 m, a burst index of 0.44 kN /g, a tear index of 2.25 mN.m2/g, and a brightness of 43.66%. The pulp converted into bioethanol (by simultaneous hydrolysis and fermentation) achieved a conversion of 70 g bioethanol/100 g potential bioethanol. The residual fraction of olive tree prunings was subjected to combustion to produce thermal energy. The heating value was 18700 kJ/kg, the flame temperature range was 1094 to 2013 ºC, and the dew point temperature range of the flue gases was 47 to 53 °C.

A trihybrid clone of Paulownia fortunei x tormentosa x elongata was used for pulp and paper production using the soda-anthraquinone (AQ) process, comparing the results with those from Paulownia fortunei. An autohydrolysis process had been previously carried out on this raw material. A composite central experimental design and a multiple regression were used for modeling and optimizing the process. A valuable liquid phase could be obtained from the autohydrolysis process of Paulownia, trying to minimize cellulose degradation for pulp and paper production. A compromise to maximize the glucan and minimize the xylan contents in the postautohydrolysis solid phase could be achieved at 187.5ºC and 15 minutes. A suitable cellulosic pulp with kappa number ranging from 12.2 to 69.2 and ISO brightness from 18.2 to 30.6% presented better results than those from other studies. Regarding handsheets physical properties (tensile index 37.3 N•m/g ) and viscosity (848 cm3/g), significant improvements could be obtained when compared with previous results of a similar process using Paulownia fortunei or Paulownia elongata.