Search

Spectral filters are fundamental building blocks in integrated photonics. Bragg grating filters have been demonstrated in silicon waveguides with a wide range of spectral responses and are suitable for wavelength division multiplexing applications. However, retrieving Bragg grating reflections typically requires external components such as fiber optic circulators. In this work, we develop fully integrated add-drop filters based on cladding-modulated Bragg gratings incorporated in a Mach-Zehnder interferometer configuration. We design complex spectral filtering devices with single and dual-band flat-top responses for the specified bandwidth. Additionally, we propose a novel design methodology which aims to minimize phase errors within the filters. We experimentally demonstrate add-drop filters with single-band and two-band rejection spectra at the datacom O-band, fabricated on a 220-nm thick silicon-on-insulator platform. Our results show an insertion loss below 1 dB and a crosstalk of around -20 dB at the channel center for a 4.5-nm wavelength grid and 3-nm wide channels., (© 2024. The Author(s).)

Efficient fiber-chip coupling interfaces are critically important for integrated photonics. Since surface gratings diffract optical signals vertically out of the chip, these couplers can be placed anywhere in the circuit allowing for wafer-scale testing. While state-of-the-art grating couplers have been developed for silicon-on-insulator (SOI) waveguides, the moderate index contrast of silicon nitride (SiN) presents an outstanding challenge for implementing efficient surface grating couplers on this platform. Due to the reduced grating strength, a longer structure is required to radiate the light from the chip which produces a diffracted field that is too wide to couple into the fiber. In this work, we present a novel grating coupler architecture for silicon nitride photonic integrated circuits that utilizes an amorphous silicon (α-Si) overlay. The high refractive index of the α-Si overlay breaks the coupler's vertical symmetry which increases the directionality. We implement subwavelength metamaterial apodization to optimize the overlap of the diffracted field with the optical fiber Gaussian mode profile. Furthermore, the phase of the diffracted beam is engineered to focalize the field into an SMF-28 optical fiber placed 55 µm above the surface of the chip. The coupler was designed using rigorous three-dimensional (3D) finite-difference time-domain (FDTD) simulations supported by genetic algorithm optimization. Our grating coupler has a footprint of 26.8 × 32.7 µm 2 and operates in the O-band centered at 1.31 μm. It achieves a high directionality of 85% and a field overlap of 90% with a target fiber mode size of 9.2 µm at the focal plane. Our simulations predict a peak coupling efficiency of - 1.3 dB with a 1-dB bandwidth of 31 nm. The α-Si/SiN grating architecture presented in this work enables the development of compact and efficient optical interfaces for SiN integrated photonics circuits with applications including optical communications, sensing, and quantum photonics., (© 2024. The Author(s).)

Optical antennas are a fundamental element in optical phased arrays (OPA) and free-space optical interconnects. An outstanding challenge in optical antenna design lies in achieving high radiation efficiency, ultra-compact footprint and broad radiation angle simultaneously, as required for dense 2D OPAs with a broad steering range. Here, we demonstrate a fundamentally new concept of a nanophotonic antenna based on near-field phase-engineering. By introducing a specific near-field phase factor in the Fraunhofer transformation, the far-field beam is widened beyond the diffraction limit for a given aperture size. We use transversally interleaved subwavelength grating nanostructures to control the near-field phase. A Bragg reflector is used at the end of the grating to increase both the efficiency and the far-field beam width. The antenna has a compact footprint of 3.1 µm × 1.75 µm and an ultra-broad far-field beam width of 52° and 62° in the longitudinal and transversal direction, respectively, while the radiation efficiency reaches 82% after incorporating a bottom reflector to further improve the directionality. This unprecedented design performance is achieved with a single-etch grating nanostructure in a 300-nm SOI platform., (© 2022. The Author(s).)

In the late nineteenth century, Heinrich Hertz demonstrated that the electromagnetic properties of materials are intimately related to their structure at the subwavelength scale by using wire grids with centimetre spacing to manipulate metre-long radio waves. More recently, the availability of nanometre-scale fabrication techniques has inspired scientists to investigate subwavelength-structured metamaterials with engineered optical properties at much shorter wavelengths, in the infrared and visible regions of the spectrum. Here we review how optical metamaterials are expected to enhance the performance of the next generation of integrated photonic devices, and explore some of the challenges encountered in the transition from concept demonstration to viable technology.